Is it possible to use a Toshiba PC Bluetooth Stack as the helmet

Similar Questions

• Is it possible to use in Myanmar? I know that the Myanmar IP has been blocked by Adobe.

  Hello

  I would check if it is possible to use Adobe CC in Myanmar.

  Brgds

  MTH

  Hi Min,

  Please see: http://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-m atrix.pdf

  I hope this helps.

  Concerning

  Megha Rawat

• Is it possible to use a CompactDAQ and NOR-DAQmx in the TPC-2212 with integrated system of Windows 7?

  Hello

  I would like to develop an application with the TPC-2212 (touch screen computers) and a CompactDaq system (NI9237 - 4 channels, ± 25 mV/V, 24-bit simultaneous Bridge Module).

  Is this possible or should I use a panel pc?

  Thank you.

  Hello!

  To work with touch screen, you can use the DAQmx BASE.

  To develop your application, you will need a host computer, where development will actually happen. For touch panel applications, you must use the touch panel module, which has the appropriate functions.
  (http://digital.ni.com/public.nsf/allkb/0FD6F56096A40AA9862578D3002EA41C)

  The touch screen will be the show as another material Measumerent and Automation (MAX) as a target.

  When you have finished your application in LabVIEW you can deploy on your Panel, but he must have the LabVIEW Touch Panel, to run your program.

  I hope it can help you! Doubts, contact us!

  Kind regards!

• Is it possible to use a Type of personalized content for the REST service operation messages?

  I try to POST to the third party, documentum of EMC, REST service using service broker in 8.53 peopletools integration operations. Unfortunately, the third party only accepts a content type of 'application/vnd.emc.documentum+json', which I could not send PeopleSoft and use a message definition at the same time.

  In my service operation, if I do NOT fill the request message I can POST to the URI with the such custom content type defined in the property page of the connector in the routing. I have not found a way to do it and also present JSON content on demand, since there is no message associated with the operation. Is it possible to include in this type of message content without using a request message?

  If I DO not fill the request message I can't POST successfully because the message content-type of "application/json" gets passed as the content-type instead of the value in the property page of the connector from the routing. Is it possible to change the content type during the use of a message definition?

  Thank you

  Paul

  Hi Paul - you can turn on tracing by using the on demand connection as follows:

  1. on the routing set detail header and detail "journal".

  2. Main Menu > PeopleTools > Integration Broker > Service Operations Monitor > Administration > control installation Options

  -Enable logging of the bridge

  -On the registration of demand = 5 (to enable detailed logging)

  Note: On request connection only works for the outgoing synchronous Services. In this case, we should be fine. You will find the by transaction log file on your gateway web server... / applications/peoplesoft/PSIGW.war/WEB-INF/.

  I did it for one of the REST service operations my test (I'm on 8.52.22). I have my content type of message the value application/json to the operation of the service page. On the routing page, I added a connector property content-type=application/vnd.emc.documentum+json.

  Here are the results on the integration gateway logs:

  Message-ID:<-.................@nowhere>

  MIME-Version: 1.0

  Content-Type: multipart/related; Boundary = "Integration_Server_MIME_Boundary."

  Content-ID: PeopleSoft-internal-Mime-Message

  PeopleSoft-ToolsRelease: 8.52

  -Integration_Server_MIME_Boundary

  Content-Type: text/plain; Charset = UTF-8

  Content-Transfer-Encoding: 8 bit

  Content-ID: IBInfo

  Content-Disposition: inline

  Sync There ... * deleted for security purposes *... ContentSection0text/plainN

  CREATE5000000000000

  -Integration_Server_MIME_Boundary

  Content-Type: text/json

  Content-Transfer-Encoding: 8 bit

  Content-ID: ContentSection0

  Content-Disposition: inline

  username = * collected for security purposes * & password = * deleted for security purposes *.

  -Integration_Server_MIME_Boundary-

  The Content-Type of the delivery is sent as HTTP Connector of the target and the content of the message (text/json) Type property is always persistent (see the text in bold above). You can compare logs between your two scenarios (with and without the message in the POST) and see if you find something interesting.

  I even tried the following code to see if that helps, but I get the same results.

  & MSG. IBInfo.LoadRESTHeaders ();

  / * Adds additional headers not defined on the route * /.

  REM & MSG. IBInfo.ConnectorOverride = True;

  bRet = & MSG. IBInfo.IBConnectorInfo.AddConnectorProperties ("Content-Type", "application/vnd.emc.documentum+json", % Httpentete);

  & RESP = IntBroker.SyncRequest % (&MSG);)

  I'm working on a similar project at this moment where I'm integrating perceptual Nolij Web RESTful API (Document Management System). I had to resort to using a http client base (common of apache) java instead of broker of integration because of the similar frustrations with REST (cookies are lost, unable to deal with raw binary data in a response message, etc.).

  Benefits: Java provides total flexibility.

  Cons: As we are bypassing framework Integration Broker, we need everything (error handlng, logging, etc.) do it ourselves.

• is it possible to use a FROM clause item value in the IR source

  Hi guys,.
  
  I need to do something similar to this in the IR source, but I get the error message. is there a way to move:
  
  > Select * from: P2_Table_Name
  
  The value of P2_table_name is a branch that I use to access page 2 (set these items with these values)
  
  I hope that my question is simple,
  
  Kind regards
  Fateh

  Fateh says:
  I think that the best way is to create four reports for each table on page 1.
  with a condition for each of them:
  Value of the element in the expression 1 = expression 2
  Exp1: P1_COMPONENT
  EXP2: CUSTOMERS

  Do you not agree with me?

  Yes, it's the way I would go.

• Is it possible to use Flash as an interactive kiosk to the screen?

  I need to create a style of the kiosk of interactive touch screen for a retail store and seeks to 5K for the software to do it! Flashes be able to work on a basis of single device?

  The answer depends on the complexity of the project.

  Yes - Flash can export an executable file that can run on a single fullscreen device.

  Yes - the Flash can work with touch screens (Treaty the touchscreen like a mouse click I think)

  If you need access to the local file (save/load), then you want to publish to the AIR (a frame in Flash) runtime

  If you need access to low level OS, you may need something separate to get (IE - access USB device apart from the keyboard and mouse). This is something that is supposed to be in the AIR 2.0, but which has not yet been made public.

• Possible to use KVM with VM?

  You can use a KVM to connect to virtual machines hosted on a hypervisor like ESX?  Ask weird I know, but the people I work with do not use VI client software.

  Any comments, you can send my way is welcomed.

  Hello

  KVM trying to attach to PS/2 or USB ports on the back of the armed forces. Unfortunately, those who really exist not for the VMS is not possible to use a KVM for it.

  The best solution is to implement a thin client that speaks RDP/VNC to VMS, you really don't want to give everyone access to the vSphere Client only administrators.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• Is it possible to use the fonts in my company the design to the use of cloud applications?

  I recently subscribed to in the cloud and quickly learned that my company fonts are not available.  Is it possible to use my business fonts when designing in the cloud applications, rather than using their fonts?

  What Adobe applications are you talking about?

  As for example, if you have downloaded Adobe InDesign Creative cloud, there is absolutely no difference in the way it uses the fonts of a copy of Adobe InDesign that you have installed from a DVD. Both applications are run from your hard drive.

  Your business fonts must be installed on your computer for use in any application of the computer.

• is it possible to use two external LDAP and authentication of external Table?

  Hi, is it possible to use both external LDAP and authentication of the external table?
  
  they all need two initialization blocks to access a session system variable, USER?
  
  Thank you

  Hello
  I don't think it's possible to impliment the LDAP authentication both extenal together. The reasons are,
  1. we cannot define two sources (LDAP and Extenal DB) in the same blocks of justine initialization user information.
  2. If two different (one for LDAP) initialization blocks and one for extenal DB are used, we cannot use variable USER twice it's a defined system variable.

  Thank you
  Swami

• Toshiba bluetooth stack cmd

  Is it possible to get the bluetooth stack through the command line or by modifying its shortcuts (something like TosBtMng.exe EXIT)? Answers or suggestions are appreciated. Thank you.

  Hello

  As far as I know that the AutoOn.exe is placed in the battery folder Toshiba BT.
  You can find it in C:\Program (86)--> Toshiba Bluetooth Toshiba Stack

  There I found a + usrguide + file this manual contains all the information about the BT stack
  Unfortunately there is no info on all possible CMD commands

• I can't update new Toshiba Bluetooth Stack.

  I'm trying to update the new Toshiba Bluetooth Stack. In fact, I'm not Toshiba laptop user, but my Bluetooth module a Toshiba.
  But, the update progress will stop at the beginning of the update of the driver. And I can see unknown USB device in Device Manager.
  The device of this unknown device instance ID is 'USB\VID_413C & PID_8103\5 & 2A27AB68 & 0 & 1'.
  I guess that software update tries to update the driver for Bluetooth, but the software assumes that my Bluetooth device is not compatible with the driver. To ensure that the software displays the message 'enable Bluetooth with Fn + F2' then hung in place.

  I use Dell Bluetooth 350 with Toshiba device. Please show me the way ~ ~ ~ I'm almost being crazy. I really need to use the Bluetooth device. Dell service team could not solve this problem.
  Help me!

  [Edited by: admin on July 26, 2006 11:30]

  In this case, you use a Bluetooth Dell hardware. We must therefore use the battery Bluetooth which offers Dell. Do not use the site Web of Toshiba Bluetooth stack, because the accompanying note shows that it supports Toshiba Bluetooth hardware.

• Re: Question re use of Toshiba Application Installer

  Hey all.

  My model came with a Modem software Toshiba, but I noticed in the Toshiba Application Installer there are a few other modem drivers that are a bit more recent. I installed one of them (Conexant) then uninstalled the Toshiba Software Modem and reboted. When he started, he reinstalled the default Toshiba Software Modem.

  So my question is, is it possible to install and use something other than my original modem? I don't know yet if she installed the Conexant. It seemed that this was the case, but it does not appear in the list of installed programs.

  As I said, the Toshiba Software Modem was the original, the other two are the software Conexant Modem driver and driver Modem Motorola. I don't know why the other two are still here if they cannot be used with my system.

  L305-S5919; Vista 32 bit

  Thank you!

  Hello

  > I installed one of them (Conexant) then uninstalled the Toshiba Software Modem and reboted. When he started, he reinstalled the default Toshiba Software Modem.

  Yes, it installs the default windows driver that is in the folder Windows/system32/driver

  > So my question is, is - it possible to install and use something other than my original modem?

  You must install the driver of modem of origin only. If you try to install other modem drivers, you will get the error as, no compatible hardware detected,

• Tecra S1 - Possible to use the new Power Saver v7.11 for example?

  Hi all

  is it possible to use a more recent version of the saving on my laptop?

  I found for the Tecra S1 as the latest version of the v1.00.34M

  THX.

  Patrick

  Hello

  Of course, you can use a more recent version of Toshiba power saver, it's not a problem.

  On the Toshiba site, I can find version 1.00.33 for Tecra S1.
  However, download and install the latest version for your laptop and it will work.
  :)

  Welcome them

• Equium P200-1ED: is it possible to use 3 Gbps HARD drive?

  Hi all

  I have a laptop Toshiba Equium P200-1ED and quickly fill capacity on the hard drive. I'm looking to upgrade to something like a 500-700 GB HARD drive.

  However, when I look around for 1.5 gb/s options I am limited to 160 GB maximum.

  Even if the current HARD disk interface is 1.5 gb/s (currently using Hitachi HTS542512K95A00) is possible to use a HARD 3 gb/s drive and P200-1ED will support it?

  I am not so embarrassed on the speed of performance, more the need for a larger storage capacity without having to get an external drive.

  Any advice would be appreciated.

  Announcement

  Hello

  Equium P200 supports the controller SATA HDD and SATA I and SATA II HDD are compatible and would be supported by the BIOS.

  You can use a disk HARD SATA II (3 Gb/s).

  But perhaps only the 1.5BGb / s (SATA I performance) would be reached.

• Is it possible to use the Satellite P200D - 11L with Windows XP

  I want to buy this model from Toshiba (P200D - 11L). Is it possible to run it with Windows XP? Because I'm not interested in Windows Vista now... thx

  Of course, it is possible to use the XP on this laptop.
  But the question is; All the XP drivers are available for this series of satellites P?

  I checked the page European driver of Toshiba and, unfortunately, I didn't find the XP drivers for the series Sat P200D currently

  Well, as far as I remember the XOP drivers were unavailable for the A200 series too. But after a few days/weeks Toshiba comes to present all the XP drivers.
  I guess that this series is brand new on the market and it may need to wait a bit until all the XP drivers will be available.

  Please do not get out of patience ;)

  Best regards