Is it possible to use express Airport and Time Capsule both as two Wifi-repeaters at the same time?

Similar Questions

• How can I disable the file sharing without Windows Firewall is turned on? (I use Norton 360 and he doesn't have two firewalls running at the same time.)

  When I go to the "network and sharing" and try to disable file sharing, it automatically turns on the Windows Firewall. I want to be able and disable file sharing and disable the Windows Firewall (I use Norton 360 firewall). Any ideas? Thank you.

  Hello

  Check this box

  How to enable file sharing enabled or disabled in Vista
  http://www.Vistax64.com/tutorials/126388-file-sharing-turn-off.html

  If no joy collate Support Norton/Symantec and Forums

  Norton support
  http://www.Symantec.com/support/index.jsp
  http://www.Symantec.com/Norton/support/DTree.jsp?PVID

  Norton forums
  http://community.Norton.com/Norton/?category.ID=NIS

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Two express AirPort and time capsule connectivity challenge

  Dear readers,

  I have a Time Capsule 802.11 ac connected to my ISP router and this is the router that provides DHCP addresses, etc. In our living room, I have an airport express (2nd generation) connected via radio and it works very well also. Now I got as a second AE (2nd generation) and want to put it on the floor of the attic to get a stronger signal via Ethernet to my TC. When I connect to a LAN of the TC port to the EI LAN port, the AE salon disconnects. When I add the Ethernet of AE cable in the WAN port both t he AE to the attic and TC disconnected. Currently, it is also connected via radio and it works, but will of course loose flow because it must still go through the different floors through the air compared to a stronger signal via Ethernet.

  Question I have, can I connect an AE with an Ethernet cable (and how to set up the AE or TC as a result) and an adverse event via wireless (IE editing exsisting which works, but let me know if you have to configure changes too)?

  Your help is very appreciated.

  Can question I have, I connect an adverse event with an Ethernet cable (and how to set up the AE or TC as a result)

  Yes, but you will need to restart and reset back to default settings AE. Then connect the Ethernet cable between a LAN <>- on the TC port to the "O" of EI before WAN port you are trying to configure EI.

  The problem that you are experiencing now is probably caused by connecting an Ethernet cable to an adverse event that has already been configured to "extend a wireless network. When EI is configured this way, is expected to Wireless ... not Ethernet. Ethernet is applied, it creates a feedback loop huge on the network which can cause all sorts of issues.

  Wizard Installation from Apple because most of the work for you. Just click the WiFi icon at the top of the screen of the Mac and then click on AirPort Express under the title of the new AirPort base station.

  

  When you click on AirPort Express, which will start the configuration "Wizard". It will take a few seconds to analyze the network, and then present a screen that looks like this:

  

  Type a device name you want to call the AE, and then click Next.  Monitor the screen following very closely... See the illustration below to confirm that the AE is set up "extend using Ethernet.  Who will confirm that the wizard picked the Ethernet between the TC and AE and apply the correct settings to EI.

  

  When you see the message Setup is complete, click done and you're done.

  If the 'other' AE is already set up to extend, then no further changes will be necessary on this device.

• Can I have Windows XP Home Edition and Windows XP Pro on two separate drives on the same computer? There will be some activation problems?

  Disc XP Home and XP Pro drive on the same computer

  I have a HP computer that came loaded with XP Home.  I have to use my hard drive XP Pro for things work related.  The work computer was a lease and discounts.  I tried putting the Pro drive in an envelope and use as external, but some files are not able to access.  Also tried to remove the XP Home computer disc and put the XP Pro drive in its place, but the system unbootable.  Can I leave the House in 'master' player and put the Pro drive as a "slave", or they will be incompatible?

  Thank you!!

  I have a HP computer that came loaded with XP Home.  I have to use my hard drive XP Pro for things work related.  The work computer was a lease and discounts.  I tried putting the Pro drive in an envelope and use as external, but some files are not able to access.  Also tried to remove the XP Home computer disc and put the XP Pro drive in its place, but the system unbootable.  Can I leave the House in 'master' player and put the Pro drive as a "slave", or they will be incompatible?

  Thank you!!

  You can add the disk with Xp Pro as a slave. You may need to change the jumper settings. However, you cannot take a drive with an operating system that has been installed on another computer and start to the new computer. In 15 years of computer technology I couldn't do it only once and it was with a Vista operating system. However, Windows is designed to not allow that.

  The most likely reason that you are denied access to the files on the disk with Pro is that you will need to take ownership of the files.

  How to take ownership of files or folders

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per individual related to the composition, and you may not use the software on these devices simultaneously.

  You can also see:

  FAQ: Can I install Creative Cloud on several computers?

  You can either sign of Creative cloud on a computer to connect to another, or as you said, buy a membership second using an AdobeID different so that you can leave, signed at on 4 computers.

• I use google chrome and lately my screen started flashing intermittently then on the internet.  Any suggestions?

  I use google chrome and lately, my screen begins to blink intermittently during the use of the internet. It flashes maybe several times in a minute... I uninstalled chrome and reinstalled... no change. This just started about a month ago.  Suggestions?

  Chrome support

• How to set up and use two video cards at the same time.

  I have HP Pavilion a6150d desktop under Windows XP SP3 PC. My goal is to be able to use the integrated video card and GeForce 220 video card I just buy at the same time.

  The integrated video card and GeForce video card (connected to the PCI-E) are installed and usable, but the problem is that I think that my computer cannot detect a video at a time card, so I can't use 2 monitors at the same time.  The video only card detects my computer is what I chose as a primer in the BIOS. When you go to the Device Manager display adaptors I can only find an available video card and that's regardless of Setup as primary in the BIOS.

  My GeForce 220 have VGA, DVI and HDMI display connectors, but I don't have that VGA cables. So my only option at the moment is to use my video card GeForce with band single VGA connector and integrated everyone to use my two monitors.

  I hope someone can help me without spending more money...

  "You're not going to be able to use the graphics card integrated Intel and PCIe x 16 graphics card at the same time."

  Thanks Frank, this already answered my question, you help me already by saving my time searching for the fix (since there is NO solution), although it won't save my money I like always your quick response and your support. My monitor is HPw1907 with a DVI connector, so I'll just buy a DVI cable. My other monitor LCD SHARP that have a HDMI and VGA connector so I'll just use the VGA cable in this one.

  So I guess that my simple goal is not achievable using HP Pavilion a6150d. I love HP more than Dell, but it's doable in Dell, so I hope that HP will have way on how to make this thing work in the future.

• possible to have 2 different application fields for two different clips at the same time

  Hello

  possible to have 2 different application fields for two different clips at the same time for the classification match in terms of the scope, only not to the eye?

  Not that I know of.  And Yes, it would be very useful. As would the ability to go back 2 in reading monitor and a button "game clip under the read head 1. Sigh.

  Neil

• Is it possible to have two mice connected at the same time?

  Hello. I have a gamer mouse, and I am pretty tired of changing the battery every now and then. So I was wondering if I could connect a wired mouse, I could use on the desktop, while my current mouse is always connected - for when I want to do some gaming. Windows Vista will allow that I have two mice connected at the same time?

  Hello

  You can connect two mice of universal Bus controller to the computer, but it goes to show that a single pointer.

• A target table is in charge of two different sources but the same columns, but a source is one database and another in a flat file.

  We all hope you are doing well.

  I have a business problem to implement in ODI 11 G. It's here. I'm trying to load a target table from two sources that have the same column names. But a source is to the file format and the other is in the Oracle database.

  That's what I think I'll create two mappings in the same interface by using the Union between the sources. But I don't know how the interface would connect to different logical architecture to connect to two different sources.

  Thank you

  SM

  You are on the right track, all in a single interface. Follow these steps

  (1) pull model of your data in the designer of the source file and your table model target to the target pane.

  (2) all relevant columns map

  (3) in the source designer to create a new dataset and choose as the UNION join type (this will create a separate tab in the source designer pane)

  (4) select the new dataset tab in the source designer pane and pull your source oracle table data model in the designer of the source. All columns that are relevant to the target card

  (5) make sure that your staging location is set to a relational technology i.e. in this case the target would be an ideal candidate because it is where the ODI will organize the data from source two files and oracle and perform the UNION before loading to the target

  If you want to watch some pretty screenshots showing the steps above, take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

• I own a windows computer and now a mac can also install LR5 with the same serial number on both?

  I own a windows computer and now a mac can also install LR5 with the same serial number on two computers?

  I'm not sure but based on the selections of purchase stating you can buy for Mac and Windows for equal opportunities of purchase you are able to install and activate on two different platforms using the same serial number.  I know that this is the case with the purchases of items but Lightroom does not seem to come as often.

• Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?

  Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?

  You can not unlock with the AppStore. Request a refund or ask the previous owner to retrieve his password:

  Check these items and follow the instructions.

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  https://iforgot.Apple.com/appleid

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• What is the difference between the package from photography to Photoshop and Photoshop on his own? Photography Photoshop has the same capabilities as the single app?

  What is the difference between the package from photography to Photoshop and Photoshop on his own? Photography Photoshop has the same capabilities as the single app?

  Hello

  Greetings!

  Photography package to include Photoshop and Lightroom.

  However, if you choose Photoshop as a single application you get 20 GB of cloud while in terms of photography, you get 2 GB of cloud.

  Plan of photography is less expensive than the only application.

  Check here: https://creative.adobe.com/plans

  Concerning

  Jitendra