Is it possible to use the USB device as an audio output on Satellite Pro?

I have a satellite laptop computer pro that is used as the center of entertainment in my room before, i.e. ripped music is played through my stereo, it's my player to dvd etc..

My problem is the following - the only link of notebook with stereo I know and am currently using is a 3.5 mm jack adaptor phono twins connected at the front of the laptop and then phono leads stereo auxiliary input adapter. It works pretty well but I noticed that when you listen to songs more calm music, there is a lot of background noise, almost as if the internal working of the laptop sounds are picked up through the headphone jack.

Y at - it another way to make a portable hi-fi audio output via usb for example, thus obtaining a more pure sound. My hi-fi entry is phono of twins.

I'd appreciate any help on this topic. Thank you

Hello

See this topic
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14645

There are two useful links providing you a USB audio device to record sounds and to connect other audio devices.
I put t know what laptop, you have exactly, but it should support a S/PDIF (same headphone jack) port.
Here, you can connect the S/PDIF audio cable and can connect the HFI for notebook computer in digital mode.

Tags: Toshiba

Similar Questions

  • Is it possible to use the USB modem on the Toshiba AT100 Tablet?

    Hi all!

    I just bought a Toshiba Tablet and I was wondering if it is possible that the Tablet could use a usb modem. My USB modem lights to say its connected but can not find where he recorded as an option.

    Concerning

    Pictonite,
    Tablet of Noob.

    Hello

    > that the Tablet could use a usb modem

    Found this info on some Android Web pages:

    + Unfortunately, you can t taken modem 3G into the USB there aren't currently has no drivers available. Maybe later on the track Google will add support for the mobile dongle in its Tablet OS, but for now, you got to jump on WiFi or a mobile wireless access point to get the online AT100 +

  • Cannot use the FN button for volume up/down/mute - Satellite Pro L100

    Hello

    When I was cleaning up my PC, I removed the programs with the Add/Remove Programs utillity.

    I accidentally deleted somekind of its driver. Now, I'm not able to use the fn for its control.

    I am not able to use FN - UP to volume high, FN-DOWN to lower the volume or FN - ESC to mute more.
    I tried the system restore, but this does not solve the problem.

    I tried to install the audio driver from the toshiba Web site, it has not helped either.

    Is anyone now how I can solve this problem and make the FN-UP/DOWN/ESC for volume control still works?

    Thank you.

    Great!

    Thanks for the comments.

  • Three monitors W/laptop using the USB device

    I am trying to run three monitors, I have a VGA to TV connection and I have an external graphics device (USB) which will reflect only my office instead of expand it and it doesn't work if I disconnect my VGA cable.  It worked correctly only twice, and then comes back to what I just said.

    I am trying to run three monitors, I have a VGA to TV connection and I have an external graphics device (USB) which will reflect only my office instead of expand it and it doesn't work if I disconnect my VGA cable.  It worked correctly only twice, and then comes back to what I just said.

    Thanks MS, I went threw the control panel and Setup for three monitors works fine now.

  • Using the USB audio device as default instead of analog audio ports

    Audio microphone USB installs and is listed in the devices under sound, video and portable with Dell computer game controller devices running Windows Vista, but the problems the system to use the USB mic as the default.  The sound devices list has also IDT HD audio codecs indicated, and the system will analog as the default input channels for the microphone, with no way to install the USB device.  Is it possible to put the USB audio as default microphone device?

    Hello RSA 456,.

    Many sound problems are caused by hardware that is not configured correctly. We will check your sound card, connect the cables in the correct locations, ensuring that the material has the power and the verification of the volume.
    Please follow the method described below to solve the problems.
    Method 1:

    1. plug your USB microphone.
    2. the LED will light to indicate that it is powered USB.
    3. Windows will automatically detect the USB Audio device and install the universal drivers.
    4. to set up your microphone as default device USB Open Control Panel.
    5. Select display as a classic view of your control panel, then select Select Sound.
    6. click on the recording tab. Here your USB Microphone will be listed.
    7. click on the USB microphone. If there is no checkmark beside the USB Microphone, click on set as default.
    8. the default device is used in most programs such as tape recorder simple registration.

    Method 2:
    Please click the link below to check how to check if the hardware works just fine.
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

    Kind regards
    Sooraj.S

  • How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

    How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

    Version OS X?

  • Cannot use any USB device after the upgrade from XP.

    Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
    Robin

    Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
    Robin

    Windows 7 handles USB devices very well.

    Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

  • You receive the error software device driver has not been installed successfully using the USB LAN cable

    Original title: Please help!

    I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l

    Hello

    Thanks for posting in the Microsoft community!
    You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.

    1. don't you make changes on the computer before the show?
    2 are you able to get any USB devices to work in USB ports?

    Check the status of the device and the driver Version:

    a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    b. double-click the category containing your device driver and thendouble - click the device name.

    c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.

    d. click OK, exit Device Manager.

    Method 1:
    You can update the drivers on the manufacturer's Web site and check.

    Method 2:

    Use Windows Update to find a device driver
    Note to use Windows Update, you must be connected to the computer as an administrator:
    Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    b check the updates.
    AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.
    If updates are available, click the driver you want to install, and then click on install.
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    If you need further assistance, please answer and we will be happy to help you.

  • Is it possible to use the system of students on 2 devices

    If I buy a comprehensive plan under a student account, I am able to use it on 2 devices? On my macbook and my ipad.

    Please see: is it possible to use the system of students on 2 devices

    (Double Post)

  • One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

    Original title: USB device not recognized

    Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

    Hello

    (1) is the specific question of specific USB devices?
    (2) did you of recent changes to the computer before the show?
    (3) have you tried plugging the USB stick on another computer?

    (4) what is the brand and model of the computer?

    I suggest to refer to the following methods and check if it helps to solve the problem.

    Method 1: Hardware devices do not work or are not detected in Windows

    Run Microsoft Fixit mentioned in the article.

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2: USB Port may stop working after you remove or insert a USB device

    http://support.Microsoft.com/kb/817900

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

    Reference:--

    Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

  • I use a USB device for the first time. My computer windows Xp does not recognize. How can I fix this prob, and where can I get the info to fix it?

    When I insert my USB for the first time, it is said that it has malfunctioned, and windows does not recognize it. Am I missing driver for USB or what? I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

    I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

    Step 1.  Identify the make and model of the USB device.
    Step 2: Identify the version of Windows XP you have, including service pack (start > run > winver > OK)

    Although the following steps 1 & 2 you could get extra help, I suspect that the 'USB device' has indeed "defective" and you have to go back to where you got it and request a refund or a replacement.

  • Use the USB port to emulate keyboard

    Hello

    Is it possible to use a USB port of an on-board controller (PXI8108) to replicate a keyboard when plugged on a device waits

    a USB keyboard?

    Thank you

    Gary.

    What I understand about USB, I don't think that you can do.

    The USB ports on the PXI controller host ports are and as such cannot be used as ports of the device. A keyboard would be a HID device class. Maybe it's a kind of emulator HID that could be placed between the PXI and your USE awaits a USB keyboard...

  • Is it possible to use the internal clock for meter tasks in the buffer?

    Hello

    Hardware: USB term mass 6251

    Software: LabView 2011 SP1

    I need to measure the angular lever position and speed of a carpet. For that I use two quadrature encoders. To accurately calculate the speed I use buffered from the measures of position using one of the available onboard counters. I understand that for this technique, I provide a sample for the meter clock. I wonder if it is possible to use the internal time base. Note that both of my counters are used so I can't generate a signal to clock with them.

    I found two conflicting pages related to my problem:

    1) http://digital.ni.com/public.nsf/allkb/EA7FFFEAFC3E1D85862572F700699530

    2) http://digital.ni.com/public.nsf/allkb/775290A3121D1FFC862577140074D3B3

    The first says that I can use the internal clock of 100 kHz, and the other says that I have an external clock.

    Comments/solutions?

    Javad

    Hi Javad,

    On your specific device, there is not a direct route from the time base of 100 kHz for the meter (according to the routing table of MAX):

    Yellow cell indicates that a route is possible but there is not direct (the "gate" terminal is used as sample clock for counters of the M series).  Mouse on the cell reveals yellow that make this route really requires the use of a counter (so it is not suitable for your application).

    On the line above "100kHzTimebase" you will notice it is called 'FrequencyOutput', which does not have a direct route to the door.  This would be the way to go if you want to route 100 kHz (or some other frequency) as your sample counter clock - you can set it up the same way to a standard meter output task:

    The output frequency doesn't have that many features like a meter output, but it is able to generate a continuous stable frequency.  There are only 32 different frequencies that can be generated using Freq Out on the 6251:

    {10 MHz, 100 kHz} / {01:16}

    Do not forget that the resolution of your measure of frequency by using this method will be equal to how many times you update the measure (hopefully, that makes sense).  In other words, if at the end of all the 1 second, you take the total number of charges since the last second, you would have a 1 per second equal resolution change in the number.  If you take the difference twice per second, you would end up with half the resolution.  You will be sampling the account register fairly quickly, but you will need only to do the calculation of the frequency after that all N samples in order to obtain a significant number.

    Another method that will certainly give a higher resolution in less time at typical speeds of coders is to set up a measurement of the frequency (the counter will count the internal 80 MHz base time period your external signal and the pilot calculates the frequency based on the result).  This method uses only a single entry - so you can just feed the 'A' your encoder quadrature signal (the method will not work if you are interested in absolute position or direction).  Without using signals A and B together, you will be susceptible to noise (which is common to have a quadrature encoder) that you want to delete (perhaps by setting up a digital filter).  Finally, you want to set a reasonable timeout on your reader calls (which will be blocked until a period of your external signal occurs), and the error-200284 handle simply report "0Hz" to make sure that your program is still sensitive even without an external signal present.

    Best regards

  • Single recovery of ESXi host disaster using boot USB device.

    Here's the scenario. I have an ESXi host 5.0 running from a USB device on a server blade using shared virtual machine network storage and is scratch storage. I have a failure catastrophic host. Can I just plug the USB device into another blade in the same chassis and start getting my VMs back operational.

    In addition, in a similar scenario if I have two devices USB with the same configuration information about them can use as a backup in case of failure of the USB device or is it config info constantly being written to the USB device which is used at the time.

    At the level of the configuration, you need not, this means that as long as you take a regular backup of the config, it is ok.

    But when you need to set up a backup system if a production system does not go and change the Server Blade, be sure to provide a coherent zoning and LUN masking for the blade, if VMware will see the same number of unit logic and tables as before. Same thing applies for VLANS, switches to which the new blade is connected must be configured in the same way that the old blade was (its ports must be in the same VLAN), or some VM can't see the network correctly.

    1. If a system is corrupt and you just need a fresh USB boot

    Plug a USB stick fresh, possibly already installed, boot, and then send the archived configuration, reboot

    2. If a full blade goes wrong, you must change the server.

    Put the WWNS of the HBAS in the same areas that the blade HBA has failed

    Present the WWN of the HBA to the storage group

    If you use the same chassis slotin, the network should be ok, but if not, put the internal ports of the switch module blade matches the new blade in the same VLAN as port internal used for blade failed.

    If you use VirtualFabric / VirtualConnect on 10GBE NICs, you must set up the same way, it was too much on the failed system.

    I hope that its more clear now!

  • Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

    Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

    Yes, I'm doing exactly this with the same put in place.

    If the problem persists the next relative to the following articles might help you.

    Troubleshooting home sharing

Maybe you are looking for

  • HARD drive not visible - how to install Windows XP on Satellite L300-11F

    I downloaded + "The Intel Matrix Storage Management Utility for the management of your local storage space, including RAID support, including drivers you will need to provide the installation manual to make the HARD disk available to the operating sy

  • Impossible to apply automatic updates

    I can't activate the automatic updates of Windows.  The message that I need administrator permission, but I am the administrator!  I really need to use this feature so any help would be appreciated.  Thank you

  • Retrieve the bytes of the image of the path of the image file

    Hello I was unable to find a post that details how to retrieve the bytes of the image of an image (given the path to the file of the image on the device).  Basically, using the FilePicker, I'm able to get the path of an image chosen by the user:

  • Problema con clave del producto

    MI problema are not themselves como activar clave Windows 7. Tengo una vidéoconférence don't con los datos pero no is como hacer para activarla, me dice of Quebec sale una ventana as this product no copia're valido o can be una.

  • UPDATE BIOS WITH OEM WIN 7

    Hello, I'm under Win7 64-bit OEM version. I want to update my BIOS by removing the old BIOS chip and its replacement by a new chip with the latest BIOS on this subject. My question is, will see the BONE and detecting the new BIOS as a computer or a n