Is it safe define a service I'm not sure if it is necessary to manual?

Similar Questions

• Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

  Please help with the problem of itunes

  Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

  Hello

  • What version of Windows are you using?
  • This happens with this program only?
  • What were the changes made before the problem occurred?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. Does one know how I can uninstall client services netware fot or a way to solve this problem?

  loging on

  When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. None knows how I can uninstall the client services fot netware or a way to solve this problem thanks, Im using Microsoft Windows XP Professional Version: 5.1.2600

  When I cut the computer on I have to press ctrl, ALT, DELETE. I'm not sure what I did. None knows how I can uninstall the client services fot netware or a way to solve this problem thanks, Im using Microsoft Windows XP Professional Version: 5.1.2600

  It is normal and safe... Do you mean that you have not always press CTRL + ALT + DELETE to log on?

  If you * want * automatic login?

  • How to turn on automatic logon in Windows XP
  • How to enable or disable the CTRL + ALT + DELETE sequence for logging on Windows XP and Windows Vista, Windows 7

• Cannot open documents of microsft because the Windows service install could not be accessed

  I can't open microsoft outlook or any office document: the following message "the windows service install could not be accessed. This can occur if you are running windows in safe mode or if Windows install is not properly installed. Please contact support for assistance.

  Try to download and install Windows install
   
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  The version you need for XP is the bottom of those listed.

  wrote in message News: * e-mail address is removed from the privacy *...

  I can't open microsoft outlook or any office document: the following message "the windows service install could not be accessed. This can occur if you are running windows in safe mode or if Windows install is not properly installed. Please contact support for assistance.

• "service pack do not have. recovery of Exchange"has been ongoing for more than 12 hours. Have turned off on the reboot, but the message remains. How can I fix?

  I installed the service pack and when the computer restarted message "service pack do not have. restoration of the changes. "came and slept there. I tried to turn off computer and start in safe mode, but nothing helped. Has been ongoing for more than 12 hours and no change. Any ideas? Thank you

  Hello

  You can try this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Error message - windows service install could not be accessed

  I am trying to download itunes to my new computer.  I get an error that says "windows service install could not be accessed.  This can occur if you are running windows in safe mode or if windows install is not properly installed.  Request technical assistance"I'm currently running Vista Home premium SP2.  Any ideas?

  Hello

  Update current Windows Setup.

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  And needed the problems:

  "Error 1719. Error message could access the Windows Installer service"when you try to add
  or remove a program
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315346&product=winxp#KB4

  Spotlight utility Windows Installer CleanUp Utility
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  --------------------------------------------------------------------
  I would also clean the possible general corruption.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Run the SFC and Chkdsk to ensure that corruption is disabled.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• When iTunes open get error, windows service install could not be accessed.

  Fatal error during Installation
  When I try to open I-Tunes, I get the message that the windows service install could not be accessed.  This can occur when windows is running in safe mode or windows installer is not installed properly.

  I followed these steps and the programs have been removed form the revo uninstaller list but it still appears in the windows Uninstall list and I get the same error when I try to uninstall it - windows service install could not be accessed.  I used revo to uninstall another program and it worked and disappeared in the two lists.

  Any other problem iTunes, contact Apple with their software:

  http://www.Apple.com/support/iTunes/

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 firewall service does not start automatically and cannot be started manually

  Update Vista Home Premium SP1, removed the Comodo, removed AVG Free 8.5, put upgraded to Windows 7 Home.

  Attempted to set security. Firewall is "red". Could not be defined. Snap-in did not work (0x6D8).
  Have rubbed the registry for References all Symantec and Comodo and the computer restarted.

  Firewall service is set to start "automatic."
  Log tab is set to "This account" with a password - I have no idea from this password (and don't know what it is).  Seems that log on should be "Local System account" with Desktop interaction

  Falied given departure following the event log:
  Log name: System
  Source: Service Control Manager
  Date: 2009-11-06 12:19:25
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: VISTALAP
  Description:
  The Windows Firewall service is stopped with the special service error access is denied...
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7024
      0
      2
      0
      0
      0 x 8080000000000000
     
      99759
     
     
      System
      VISTALAP
     
   
   
      Windows Firewall
      %%d Ko
   
  

  Repository is consistent.

  Suggestions?

  Hi dynameme,

  What is a home or work computer? Is there any server/domain mean?

  Try a startup repair, it sounds as if you have an error with the help user account to run the service.  Startup Repair may be able to fix this.  If this isn't the case, then you should try to repair the Installation.

  STARTUP REPAIR

  If you have a Windows 7 installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows 7 installation disc:

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  Installation of Windows 7 repair

  Information

  This will show how to do a repair of difficulty your currently installed Windows 7 upgrade installation and to preserve your user accounts, data, programs and drivers of the system.
  THE ELEMENTS THAT WILL BE RESET TO DEFAULT OR AFFECTED:

  • Sounds
  • Services
  • Visual effects settings
  • Device drivers - make sure you have these practice to reinstall. They don't always stay after the installation of repair (upgrade).
  • You may lose your themes custom because no permisions on the old themes. Go to the themes folder hidden in C:/Users /(User-Name)/AppData/Local/Microsoft/Windows/themes, then take ownership of the folder themes and you have now all your themes back.
  • It was reported that you can also lose your Media Center gadget after doing the repair facility.

  WARNING

  You will not be able to do a repair installation of upgrade mode without failure. Installation of Windows 7 DVD that allows you to do repair installation with must be the same or more recent Windows 7 update (ex: level updates Windows or MS) that the currently installed Windows 7. If the DVD is an older version, then you can not do a repair with her installation. You must have at least 8.87 GB of free space, more if you have a larger facility, on the hard drive that Windows 7 is installed on do a repair installation.

  Here's how:

  1. start Windows 7 and log on to an administrator account.

  2 disable the 3rd firewall, antivirus or other security program to avoid what it possibly to prevent the installation of repair of Windows 7 upgrade.

  3. place your installation of Windows 7 in DVD Player DVD while in Windows 7 (step 1) and click on the option of setup.exe run in the AutoPlay window in the currently installed Windows 7. (See screenshot below)

  NOTE: If the AutoPlay window does not open, then open the folder on the drive in the computer and run the setup.exe file.

  4. click on the install button now to start the installation. (See screenshot below)

  5. clear the I want to help make Windows installation better area (unless you want), then click the go online to get the latest updates for the installation option. (See screenshot below)

  6. Windows 7 will now check online and install the available installation updates. (See screenshots below)

  7. check the I accept the license terms box, and click Next. (See screenshot below)

  8. click on the upgrade option. (See screenshot below)

  9. installation of Windows 7 will now begin. (See screenshot below)

  NOTE: During the installation, your screen may flash, and the computer will restart several times.

  10. after the final reboot, you will see this screen for a while. (See screenshot below)

  11. Enter your Windows 7 product key number. (See screenshot below step 12)

  12. uncheck the automatically activate Windows when I'm online box unchecked, and then click the next button. (See screenshot below)

  NOTE: You can activate Windows 7 later after you make sure that it runs correctly. (See step 19 below)

  If you chose to automatically activate Windows online when you set up your computer, automatic activation begins trying to activate your copy of Windows three days after you sign in for the first time.

  13. click on the settings recommended. (See screenshot below)

  14 select your time zone and set your date and time settings, and then click the next button. (See screenshot below)

  15. click on the option for the location of your computer select the settings appropriate to apply to this place network location type. (See screenshot below)

  NOTE: It is best to choose a Public place for the best security.

  16 Windows 7 will now prepare your desktop so that it starts. (See screenshots below)

  17 check if you are missing files from the user. If you are, then you can copy them from the C:\Windows.old or protected which is hidden, C:\$INPLACE.~TR operating system and files backup C:\WINDOWS.~Q. (see screenshot below)

  18. If the power goes out step 17, then you can run Disk Cleanup. You will need to click on the own key file system first and then check that the files ignored by Windows upgrade previous installations of Windows and Windows upgrade log files boxes. (See screenshot below)

  NOTE: This will remove files C:\Windows.old, C:\$INPLACE.~TR, and C:\WINDOWS.~Q from step 17 above.

  19 refresh your performance Windows (WEI) index score.

  20. when completed, all you need to do is to activate Windows 7.

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cloud Computing from Toshiba service still does not

  Why is the Cloud of Toshiba service still does not, he did for months now that the service has been unreliable.
  I had many problems with the service Cloud from TV Toshiba, my TV is just more under warranty and no cloud services now work correctly.
  I found several reviews about the length of password and IP addresses and everything in the correct room works.
  Very disappointed with Toshiba support service East of rubbish.

  Posted by foxchrisamr
  

  Why is the Cloud of Toshiba service still does not, he did for months now that the service has been unreliable.
  I had many problems with the service Cloud from TV Toshiba, my TV is just more under warranty and no cloud services now work correctly.
  I found several reviews about the length of password and IP addresses and everything in the correct room works.
  Very disappointed with Toshiba support service East of rubbish.

  You do not mention your model and services that do not work, how can you expect then, that anyone is able to help you?

• Satellite A505-s6970: Toshiba Service Station does not work on Windows 7

  Hey guys I need your help,

  I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.

  When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
  Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.

  Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.

  Thanks for your help

  Hello

  To be honest I have no experience with this tool.
  I m using Tempro.

  However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
  You may need to wait for the next update that works correctly with Windows 7.

  You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
  In my opinion, you should take a look from time to time on the Toshiba page we.
  I noticed that each new day pilot is released and released.

• Windows Update service works do not (Windows 7)

  If I try to start the service manually from the Services application does not list.  Or too much Security Center.

  I was victim of a malware attack.  I used Malwarebytes to remove it.

  Although these programs are good to get rid of the infected files that they do not repair your windows later.  This worm has made it impossible for me to run Windows Update, it took the Security Center and more likely

  I tried to run the malware malicious software from Microsoft but that did not help either

  Now, my reaction is to reinstal windows but my laptop didn't come with a CD, the Windows 7 Starter has been preloaded and I don't have the money currently upgrading to Windows 7 family or professional.

  What can I do?

  Thx a lot

  Try this

  http://support.Microsoft.com/kb/971058

• NET framework 3.5 family update and updates for framwork3.5 net service pack1 will not install

  NET framework 3.5 family update and updates for framwork3.5 net service pack1 will not install

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  For more information: http://taurarian.mvps.org/Framework/Net_Framework.htm

• Service Pack3 will not install XP - access denied

  original title: Service pack 3 will not install XP

  I have a Dell Inspiron 600 m running Windows XP Service Pack 2.  I try to add to my home network for a person with a disability to use wireless.  The wireless is on and now that it is connected via an ethernet cable.  I try to install Service Pack 3.  I apparently need it to do what I want, according to the technology of Comcast, who works with me.  I tried several facilities.  It gets about 3/4 of the installed path and then stops with the message "access denied!"  ANY help is appreciated.  Cheryl

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"
  http://support.Microsoft.com/kb/949377

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

• I need to upgrade internet e, but every time I try it says my service pack is not supported.

  I have already installed SP1 and did all my updates.  I don't know why, it always says that my service pack is not supported.  I have windows vista.  you will need to be upgraded since the Explorer 7 to ie8 or better.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.