is it safe to delte several files install.res #dll

I have several install.res #dll files on my computer, is it safe to delete them or who is required

Hi JenniferNellis,

For Microsoft Windows operating systems listed in the "applies to", a large part of the functionality of the operating system is provided by dynamic link (DLL) libraries. In addition, when you run a program on one of these Windows operating systems, a large part of the functionality of the program may be provided by the dll. For example, some programs may contain many different modules, and each module of the program is contained and distributed in DLLs.

The use of DLLs promotes modularization of the code, the reuse of code, use efficient of memory and reduced disk space. Therefore, the operating system and programs to load faster, run faster and take up less disk space on the computer.

When a program uses a DLL, a problem called addiction can cause the program does not run. When a program uses a DLL, a dependency is created. If another program replaces and breaks this dependency, the original program cannot run successfully.

With the introduction of Microsoft .NET Framework, most addiction problems were eliminated by the use of assemblies.

Take a look at the links:

http://support.Microsoft.com/kb/815065

http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/dll-files-what-are-they-can-they-safely-be-deleted/8bcfa405-03f5-46c0-9623-a4d8509dc363?msgId=8e3430e8-d345-4870-a237-ef8b6cea7a10

http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/restoring-accidentally-deleted-dll-files/9054031c-319a-4402-8176-890c612387b6?msgId=1086f31c-B96B-4bbf-BCC4-26c27f47d879

Tags: Windows

Similar Questions

  • Y at - it a safe application for concatenating several files into one .rtf?

    Y at - it a safe application for concatenating several files into one .rtf?

    Why do you do this?

    Is it arril (3D image files) or .rtf (Rich Text Format) files?

  • Several files in a temp folder cannot be deleted, rename, copy, or move to XP

    I have several files in my temp folder that I can't delete, rename, copy, or move. I was hunting for them with research and it brings back me to the same temp file. The registry can not find them. I even tried to delete using BACK, but it says no file. I get no error message just bong when I try to remove it. I just tried to delete them in safe mode, it did not work.

    You can navigate to the folder in the command prompt?  From the record have you tried del *. * ?

    Run a chkdsk /f on the volume.

    John

  • Is it safe to delete the files from the System 32 > DriverStore > Temp folder?

    I was do a cleaning on my system and find files and temporary folders in all directions. I was wondering if it is safe to delete the files from the System 32 > DriverStore > Temp folder.

    Thank you

    DC

    Nothing in the Windows or Program Files and files their subfolders should be left alone.  You won't earn a significant amount of disk space, and you may cause to yourself untold trouble sleeping herein.  Use instead the provided Windows Disk Cleanup.  You can get to it by clicking on start-> computer, then click on the C: drive and click Properties.  On the general tab, you will see disk cleanup.  Use it and you will be safe (and not sorry).  Everything you personally placed on the computer can always be removed of course as long as you do not try to remove installed manually the software (use the programs and features in the control panel for this).

    I hope this helps.  Good luck.

  • How to change the extensions on several files with Windows 7?

    * Original title: Extentions

    How to change the extensions on several files with Windows 7?

    You hear no doubt, is that your movie software will only recognize certain types of image file formats.  If this is the case, you will need to reformat format files to any format PNG is recognizable by the software.

    Rather than we guess, please identify your «film» software

    Download and install IrfanView, which is a free utility for images.  http://www.IrfanView.com/

    IrfanView has the ability to read a great many formats of image files.  It can also convert image files formats.  And even better - for you - it can do all these things on a batch of files.

    As test, after I installed IrfanView, open one of your PNG files.  Now click on file > save as, and select the 'Save as Type' to be little matter the file type of your movie software will accept.  Save the file.  Make sure your movie software can accept the new file.

    Once you are convinced that you can modify files that you have in a format that you can use, use IrfanView

    File > Batch Conversion/Rename command.  If necessary, see IrfanView help on this topic.

  • How to delete several files at the same time in Windows 7

    Original title: I'm operating a windows 7 and I am the only operator. I'm used to Vista. All I want to do is to highlight several files and delete them from Documents in the trash.

    I'm operaating Windows 7 and I was used too using Windows Vista but I do not have the Remove feature that I outsourced either by organizing right clickng on selected files/files. I also have Norton Antivirus installed.

    Hi Allan Cole.

    It seems that these downloaded emails would not have permission to delete.

    You suggest to download and save all emails in a specific folder, and then you can delete or read emails downloaded from this particular file.

  • Cannot print a book or several files in FrameMaker 12

    Hello

    I installed FrameMaker 12 as part of the Technical Communication Suite. I encounter the following printing problems:

    Unable to print multiple files

    To print a file, the file must be open and in home (so in the screenshot below, I can print only Orca_AcquireLine_Content)

    However, if I select several files of the book...

    .. then select print the selected files , I get the following error and FrameMaker crashes:

    The two selected files are then saved as files recovery.

    Impossible to print a book

    If I select book to print the correct files in the book are automatically selected (in this example, that orca_acquireline_dochistory is defined to exclude from printing) but nothing happens

    Save as PDF

    This option works very well.

    Save the book as

    When the PDF option is selected it also works very well.

    If anyone has experienced this problem or has any ideas how to fix?

    Thank you

    Nicola

    What is the point of FM version? The most recent is 12.0.3. The initial version had a problem when printing the book file.

    For the creation of PDF files, save it in PDF format is now recommended instead of printing to pdf.

  • Highlight one several files at the same time

    I would like to highlight several files to delete at the same time. Through Windows highlight you or click on the first file with the mouse and click on the last file and everything in-between becomes highlighted for deletion. Is there a way to do the same thing with my Mac without clicking on each file individually?

    OS X does not have an iota of code Microsoft Windows. Do not expect that it works in the same way.

    1. You have the choice on OS X. You can click and drag the file icons that you want to remove, then right-click on one of them and select move to trash.
    2. You can select the first icon in the file and then pressing the SHIFT key or order, select the following icons. Then click on any place in the trash.
    3. Step 2, but using the arrow keys for the selection of additional directional file icon.
    4. Combine [1, 2, 3] to add or subtract icons from file.
  • Rec'd dropbox to the message with a photo of the friend doc. Such notice, thought has been expanding doc, immediately went to the zip file downloads. Open the folder several files, open 1, did not open the funny code file. I'm ok, anyone who sent hacked.

    Received email claimed friend which contained dropbox. In dropbox was the photo of the small document and note to friend. (I wasn't familiar with dropbox). The document had seen listed by it. I clicked on see thinking I was enlarging document to read what it was. A folder of zip file immediately went to the download. I opened the case and he had several files listed, suspicious code. One who does not I opened. The person called and they said that their e-mail had been hacked. Someone had mentioned to them that it would be Zeus. Although I have downloaded zip file and open a folder which looked ok, and I did not open the file with the code of suspicion. I agree with you?

    I agree with you?

    Yes. Just delete the files and the message.

  • Insert quickly slides of several files

    I have been using PowerPoint for many years, but now I want to change my speech.  On PowerPoint, there is a feature where I can "insert slides from file".  I have often used this function to insert the files (database of song lyrics) quickly to form a unique presentation with special songs, I need on a given day.

    I would like to know if there is a similar feature on Keynote, or if there is another way I can insert quickly from the files of a database to compile a unique presentation.

    It would be much too tedious open individual database files, select all of the slides, drag them into the new format, and then close each file database.

    Any help would be greatly appreciated.  Thank you!

    If there is another way I can insert quickly from the files of a database to compile a unique presentation.

    Only databases Keynote can access media import files are iTunes and PHOTOS.

    Insert quickly slides of several files

    Keynote can directly move the media to a folder if they are graphic compatible QuickTime video and audio.  Drag and drop pictures on the Panel of the browser, it is located on the left side of the slide canvas.

    We can quote:

    video; MPEG4 H264

    audio; AIFF mp3

    graphics card; TIFF JPEG PNG PCT

  • Importing several files .csv in the data portal

    I'm looking to import data that contains multiple .csv files in the data portal. I have a code to succeed, which can erase all data from the data portal, open a dialoge box to find new data and open new data using a .csv use. I want to improve this script to be able to have the ability to load multiple datasets in the data at a time portal, but I have a limited knowledge of the VBS coding structure. Can someone advise measures to reach this solution with VBS minimal coding experience? Thank you all in advance for your help.

    Hi dc13.

    The tiara FileDlgShow command has the ability to load several files at the same time. Please take a look by using tiara for more details and an example.

    Greetings

    Walter

  • Monitor the files installed in the system by the installer

    Hi all

    I have a program to install my application built through LabVIEW. I need to follow as *.dll files and other files that are installed on the system.

    Can we get a list of the files installed by the installer on the system for the purpose of monitoring?

    Thank you.

    Parag - D


  • How buy/install file MSVBVM60. DLL on my Dell Dimension 8400 - Windows XP Home Edition?

    Have made many attempts to install MS of the indications of updates KB2804576 and KB2804577, nothing helped, despite the "installed successfully".  I am told that this is caused by the missing or damaged file: MSVBVM60. DLL. How can I acquire and install this file, if, indeed, that's the problem?  My OS is Windows XP Home Edition.

    Mr. J. Wilson

    E-mail address is removed from the privacy *.

    Hello

    1. What is the exact error message?

    2. don't you make changes to the computer before the show?

    Here are some ways you can follow to resolve the problem:

    Method 1:

    Run the checker (sfc) system files and then try to install the updates.

    Reference:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    Method 2:

    Open the Windows Update troubleshooting utility.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

    Method 3:

    Check out the link and follow the steps in the article:

    Problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

    Method 4:

    Try to install the updates manually.

    Reference:

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=38875

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=39006

    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

  • It is safe to delete the files in blue text and a sign $?

    It is safe to delete the files in blue text and a sign $?

    If you mean files with names like $NTUninstallKBxxxxxxx$, see http://windowsxp.mvps.org/Hotfix_backup.htm

  • Copy several files to the command prompt

    I want to create a batch file copy several files that I specified a directory and use a command once. but when I tried to 'copy file1 + file2 + file3 destDir', it copies only the first file. I do not copy all of the files or the files whose names share a model. If the wildcard characters * and? does not apply here. What should I do to copy several files?

    You probably want to use a command like this:
    for /f %i in (list.txt) can I copy/b %i destDir
    Where "list.txt" is a file that contains a list of the files that you want to copy and 'destDir' is the directory you want to copy.  If you put this line in a '.bat' file, you may need to replace each character "%" to "%".

    Or, if it's a short list of files, you could do something like:
    for %i in (file1, file2, File3) can I copy/b %i destDir

    HTH,
    JW

Maybe you are looking for