is it safe to use a view control of sequence to display the sequence file both for execution
I have a Teststand UI written in Labview 2012. It has a single control of sequence, and I use the ConnectSequenceView method to switch between the display just the loading sequence file and the running. Allow me to reiterate. When a file sequence is running, the control is connected to the execution Manager. Otherwise, it is connected to sequenceFileView Manager.
I begin to suspect that I have questions related to this control, when I do the following.
1. load a movie file
2 run Single Pass
3. the execution ends
4. unloading and Release sequence file
5 load a different sequence file
6. run single-pass
7 Labview crashes
Am I missing a step?
Thank you
Kevin
So it seems the crash of Labview, I mentioned in the original post is unrelated to the joint use of display of the sequence control. However during my troubleshooting, I noticed that I was missing cut from a point of view of control stage before connecting the other view.
And for the record, I think that there are many things wrong with the architecture used in the complete example, but there also many too many features for what to. Just need a simple "press a button" and "run a test" for operators. Everyone uses the sequence editor.
All right. Thanks for the comments.
Kevin
Tags: NI Software
Similar Questions
-
How to use a parameter query to select and display the data in the table of the façade
Hiiiiii
I am using Access 2007 database
I want to select the specific data in the database using control of the chain as 'select product, size, weight of ProductInfo where barcode (chain control) =?' and also display the same table of façade.I use the connected database toolkit.
I saw the example of the parameterized insert, but it did not help to use parameterized select query, as well as to display data of parameterized select query.I looked for example on parameterized select query, but I don't have any.
So pls guide me how to do this. I would like to know the other method (if any) that the use of parameter query to perform the same thing.
If possble pls share a vi reference.
Thank you!!!HII szewczak
Thanks for the reply
but I did not getsolution in one of your shared links
My problem is solved. There is no need to use the parameter query to select control values
In my case I want to display data from database where bar code is even entered by the user
I use the data function DB TOOL CHOOSE and create the condition of chain based on concatenation of strings -
Hi all! I recently bought a logo and said that I would need either Adobe Illustrator or CorelDrawX7? to view and perform additional modifications to the source files, I bought as well. My Question is there at - it a free Version of Adobe Illustrator? or What Can I do? Any help would be greatly appreciated! Thank you very much! Tracy
You can use I as a trial for a limited period of time. Please visit:Creative cloud product trial | Download, install, start the trial
-
I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.
Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html
-or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp
-
When I use the function "cut", the line of results more sharpness compared to the original files. For example, {A: "file.psd"-> cultures 4x6inch, 300 dpi-> B: "cropped file.psd} then the results are as described as a first step. What s the problem. (Photoshop CC, windows7)
I'm a Retoucher of photpfile have used the CS2 version for many years, and fuction 'Harvest' is an important and frequent tree tools myself. The result of the broke lines drive me annoying cause my feeling touch Sofete are all blown away. Please help me.
I think you're talking about using the crop tool? If you're cropping with a size and resolution that involves interpolation of the image, the crop tool will use your preference for the Interpolation of the Image. By default, bicubic is automatic, which can easily result in a sharp file. Change your preference (in general) to bicubic and you shouldn't see any sharpening.
I hope it works for your situation.
-
I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.
As I had not heard of you, I tried to 'cut' of this folder and pasted into a folder, I called "temptemp" in the same root fodler lacation, (not in the original file). Run the program and it gave me the same error and closed again. Any help now?
-
In the details view is it possible to display the fields of video highlights on video files?
I have a list of video files sorted in the Details view. Some were formatted with an AAC format and some are formatted with a MPEG Layer 3 format. I would like to know if there is a way to display the audio format in Details mode, so I can separate into two different folders. There is a shell extension that can be added that will do this? It will also allow the duration and other fields to display?
Hello
You can only use the integrated in the extension options. The items below should answer your question.
Organize files and folders
http://www.Microsoft.com/windowsxp/using/Setup/maintain/filemgmt.mspxHow to arrange files using folder views in Windows XP
http://support.Microsoft.com/kb/306554I hope this helps.
-
Display the HTML file by using content presenter
Hello
The default content presenter displays content from a single html file in a page as expected. But I tried to show all HTML files in a folder. He has not worked as planned.
should what adf component I use to view the html file?
For example, we use af:image in content presenter to display image from a folder files.
I use jdev 11.1.7.0 with the last extension of webcenter.
Thank you
M Chambers
Hello
Try af:inlineFrame to display html content.
Hope this works
-
I have a PDF file that shows dotted blue around some of the pages of the document. They weren't there when I opened the PDF file before, and I did nothing for the parameters I know. I don't know why they came, so don't know don't no how to get rid of them. I have Adobe Acrobat Standard XI on my desktop, using Windows. Any help will be appreciated.
Hi Sara,.
I couldn't find "print > printers marks" dialog box in my version of Acrobat, which is Acrobat Standard XI. However, your response has helped a lot in a search that led me to the answer. Use view > show/hide > navigation components > layers to show the layers pane. I clicked on 'the eye' off to the relevant pages, and the marks have disappeared.
Thank you very much!
Carolyn -
Possible to use two views and controllers to work with the same MovieClip?
Gidday
I have a movieclip library I added in a view. The view has a controller and a model.
The current view and the controller are an ok size, but I need another datagrid in the moviclip above addChild, and there is a good amount of features to go with it.
I could continue to use the same view and the controller, but I was wondering how I could addChild datagrid to the movieclip and use a different point of view and the controller, but share the model?
My controller of origin (for short)...
public void Controller1 (sharedModel:sharedModel, stadium: Stadium)
View1 = new View1 (_sharedModel, this, several)
and my opinion...
public void View1 (sharedModel:sharedModel, controller: Controller1, target: Stadium)
I managed to infuse a second point of view one through Controller1...
View2 = new View2 (_sharedModel, Controller2, several)
View1 = new View1 (_sharedModel, this, several, view2)
I addChild (datagrid) in mode 2, then addChild (view2) in view 1 and got the datagrid control to appear where it should.
However, to view 2 does not evolve successfully all the properties of the controller 2.
The other option was to instatntiate a whole new set VC of root, as I've done so far for every major aspect of the project, but then I wouldn't be able to add the datagrid control to the above movieclip.
What is a better way to put in place the add items to a movieclip of two VCs?
See you soon
You already know the answer - you are simply not see the forest for the trees.
If you have the code of the controller like this:
public function get theViewIcontrol (): {SomeViewType}
Return _theViewIcontrol;
}
public function set {theViewIcontrol(value:SomeViewType):void}
If {(_theViewIcontrol)
Remove outgoing view headphones
}
_theViewIcontrol = value;
If {(_theViewIcontrol)
setting properties, add listeners, etc.
}
}
How is it that not connected?
RobotLegs done automatically, through the [insert] metadata tag. Look at their documentation around mediators.
Note that in RL, the "controller" is not really a thing. The Ombudsman would simply transmit queries of the view for the event bus, and from there, the Control Board would launch everything that controls are necessary.
-
I want to see all the names of everyone in the group in the TO field: only the names of individuals in the Contact Group and NOT to display their individual addresses alongside their names; and I don't want to use the BCC field (because it will appear all the names). Is this possible?
Unless you have included their address in a part of the field name, the addresses must disappears from view when sending. That said, all they need do is click on transfer, reply to all, or view the message source and they see all the addresses. That's why the BCC option was created. Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
How can I do embedded in the PDF Viewer Firefox remember last position displayed in PDF file?
As for now, it doesn't. I have a big book PDF and I want to pick it up where I finished the last time.
And there is no function "mark page in PDF format.Hello r5ha, there is an icon to bookmark to the right of the toolbar to the pdf viewer - when you right click you can create a bookmark that will take you to the position in the document where you left...
-
When I run the sfc/scannow, I get a message telling me "files which are required for Windows to run properly have been replaced by unrecognized versions." To maintain stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition Service Pack 3 CD now"with options; try again, more information or to cancel.
A CD came with the computer and I don' t know how, or if I can use the i386 at this stage. contains WINNT i386. EXE, and WINNT32.exe indicating me a full copy of the system.
If it is doable but requiring a major tech-skills, I will put an end to this attempt and try to find a CD. (old dog, new tricks)
Thanks for any advice.
Hello
Please go through this page.
http://www.updatexp.com/scannow-SFC.html
Thank you
Dinesh
You can vote if my answer is helpful. Thank you
-
I can't use my keyboard and mouse and it displays the code 19 in device managerment.
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
I used autoexec.exe to remove some shows key file not found
I use the troubleshooting, and it did not help. It shows
Mouse Compatible PS/2 has a driver problem
PS/2 standard keyboard has a driver problem
You will need to use a working driver to connect your mouse and keyboards. If you do not find one on the site of the manufacturer of the device, you will need different hardware to use with Win7
Messages rating helps other usersMark L. Ferguson MS - MVP
-
The only way to see the images 'discovered' or 'open' individual icon.
Miniatures,
Open your my pictures location, click organize in the upper left corner, click folder and search options, click the View tab and uncheck the top option, always display icons and never thumbnails, select apply to records on the top and apply and OK on the bottom.
If the photo thumbnails appear now but look washed on a right click and select Properties, on the section of the general tab, uncheck the box for the hidden attribute and save it.
Return to your location of my pictures, change the display of the page on the top of the right side next to the question mark symbol, there is another symbol with a drop-down arrow, click it and select the medium or large icons options specified.
Rotate pictures of iphone 4s,
Right-click and point to open with and click on the paint,
Rotation, click on save.
Turn videos,
Click right and Point t open with and click on Windows live movie maker.
Rotate and Save is in the upper right.
Maybe you are looking for
-
Apple store 4th gen Apple TV apps.
Can someone tell me witch apps are available in the Apple store can be used with the Apple TV (Europe, Netherlands) Dutch 4th generaties? If this is not the case, where I can find an answer? I intend to buy an apple TV is based on applications availa
-
I can't drag and drop files in a message to an attachment, why?
Can I get information on how to set my thunderbird to manage files as attachments, when I slip and fall... .as outlook
-
My Satellite L755 HDMI - output 16 M has stopped working
Hello! I have been for long the my Satellite L755 HDMI connection to a TV, but a few days ago it stopped working. The laptop detects the TV and identifies it as Samsung, but there is no signal on the TV screen. Outputs HDMI to the TV and cable are ok
-
Parental for separated parents
Hello I have recently upgraded to windows 10, and in the order on behalf of my son move to windows 10 family settings, it prompted me to send him an invitation to my 'family' (of which he was already gone when it was Windows 8). However, it does give
-
Is it possible to lock only some apps like videos or photos?
Is it possible to put a password on just photos or videos on the Backflip