Is no longer, I could use the "scroll bars" on the touch pad to move the cursor up or down or back.

I recently had my computer Dell XPS 'fixed' and when I came back I couldn't use the "scroll bars" on the touch pad to move the cursor up or down or back.  What can I do to remedy this?

Thanks for any help you can give.

Hello

  • What is the model of the laptop?

I suggest you to update the latest drivers from the Dell website and check.

http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

You can also check this link:

http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_361927&isLegacy=true

See also:

http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

Tags: Windows

Similar Questions

  • Try to adjust the text of the labels. Is constantly "could use the tool text because the channel of the target is hidden"?

    Try to adjust the text of the labels. Is constantly "could use the tool text because the channel of the target is hidden"?

    Hi Matthew,

    Go to the Palette layers and make sure all are highlighted, not just one

    Kind regards

    Tanuj

  • Cycling pictures using the cursor.

    Hi, I am a complete newbie to flash (it took me 10 minutes just to find out where to put actionscript code lol). In any case, I'm doing a flash where you can scroll through the images using a scroll bar. These are images of a face of people of 13 angles from 90 degrees to the left, looking at the Center, right 90 degrees. I want to be able to turn the face using the slider. What I'm trying to do is similar to another thread, I read (but not exactly the same goal) so I took the code from there just to started get me. Currently when I test the movie face moves backward (looping) and the scroll bar does not interact with the images/images. This is the code that I have 1 image 1 layer. I know that this code can be completely wrong for what I wanted to do since I pulled it of someone elses project.

    function f (mc:MovieClip, x 1: number, y1:Number, x 2: Number, y2:Number) {}

    MC.m =(Y1-Y2) /(x1-x2);

    MC.b = Y1 - mc.m * x 1;

    }

    f(mc_slider.mc_handle,mc_slider.mc_rail._x,1,mc_slider.mc_rail._x+mc_slider.mc_rail._width-mc_slider.mc_handle._width,mc_frame000._totalframes);

    {mc_slider.mc_handle.onPress = Function ()}

    this.startDrag (width of false, mc_slider.mc_rail._x, this._y, mc_slider.mc_rail._x + mc_slider.mc_rail. _ - mc_slider.mc_handle._width, this._y);

    clearInterval (current);

    Current = setInterval(dragF,50);

    }

    {mc_slider.mc_handle.onRelease = mc_slider.mc_handle.onReleaseOutside = Function ()}

    this.stopDrag ();

    clearInterval (current);

    }

    function dragF() {}

    frameNum = Math.round(mc_slider.mc_handle.m*mc_slider.mc_handle._x+mc_slider.mc_handle.b)

    trace (mc_frame000 + "" + mc_slider.mc_handle.m + "" + mc_slider.mc_handle.b +"" + frameNum)

    mc_frame000.gotoAndStop (frameNum);

    }

    And this is the code that I put in the symbol for the slider-

    This.PERC = 0;

    {handle.onPress = function ()}

    this.startDrag(true,0,0,rail._width,0);

    {this.onEnterFrame = function ()}

    perc=Math.round(this._x*100/rail._width);

    }

    }

    handle.onRelease = stopDrag;

    handle.onReleaseOutside = stopDrag;

    Any help would be appreciated, thanks!

    Thus, faces is not set on the timeline that contains this code (at the time where the trace() function).

    Click on an empty part of the scene (or behind the scenes) and then click on your movieclip of faces on stage.  in the properties panel, on the left side, type 'faces' without the quotes.

  • I want to use the Google toolbar. I installed of FF7. I will be able to use the toolbar again if I go back to FF4? If so, how to do that.

    I want to use the Google toolbar. I installed of FF7. I will be able to use the toolbar again if I go back to FF4? If so, how to do that.

    If my post has solved your problem, please click the 'Solved It' button next to my first post.

  • Why we use the cursor

    Hi all

    I would be grateful someone right me if I'm wrong. I ask the question below just for my purpose of learning.

    Question - Why do we use the cursor?

    Response Cursor is used to treat several lines in PL/SQL.

    Or

    Is used to treat a set of records from one or more tables, you can write a cursor on the table using select statement and then you can browse through all these a Recordset, and perform your required operations.

    Post edited by: Muzz, I'll open another discussion to my other question. Thank you

    Hello

    Muzz says:

    Hi all

    I would be grateful someone right me if I'm wrong. I ask the question below just for my purpose of learning.

    Question - When we use Procedure and Function when?

    Response

    When you want to run a series of DML statements then do like us and when we want to return a single value, then we use the function.

    Much has been written on this subject.  Start by finding some of them:

    https://www.Google.com/#q=when+use+procedure+function+Oracle

    read some of them and then ask a more specific question

    Procedures are not just for the DML; There are a lot of things in addition to DML you can do in the procedures.  For example, you can send e-mail messages, or can read and write files.

    The second half of your response, 'when we want to return a single value, then we use the function', is the right of bascally.  In particular, when you want to return a value that will be used in a SQL statement, you use a function.

    Functions in the pipeline are a special case.  A lot of what you read or you say about 'functions' means implicitly 'no Pipeline functions.

    Question - Why do we use the cursor?

    Response Cursor is used to treat several lines in PL/SQL.

    Or

    Is used to treat a set of records from one or more tables, you can write a cursor on the table using select statement and then you can browse through all these a Recordset, and perform your required operations.

    You'll have best results if you start a separate thread for each separate issue.  This issue is completely separate from the question on procedures

    You're right that the sliders are a way to process the rowsets, which can contain 1 line or several lines.

    Yes, you can use a slider to manage the rows one at a time.  Do not forget that it will be less effective than the manipulation of all at once, so don't use a cursor to do something that can be done in a single SQL statement.

  • When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

    When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

    Double-click on the Brush tool and you will see important option.

    Please also read the manual on the other options.

  • When to use the cursor for loop and the cursor (open, fetch, close)

    Hello world
    I have a small doubt about when to use the cursor for loop and when to use the cursor for loop and the cursor (open, fetch, close).
    Well, I'm not the difference between implicit and explicit cursor. So please tell me how I got to know, what to use and when?




    Kind regards
    BS2012

    Published by: BS2012 on January 29, 2013 12:15

    All SQLs are analyzed, stored and executed as cursors. Thus, you will always use a cursor.

    The problem is that languages, such as PL/SQL, provide different interfaces to interact with the SQL cursor. As the ref, the slider interface, the interface DBMS_SQL slider interface and so on.

    Each of these interfaces offers different features. For example, using the interface DBMS_SQL allows binding dynamics and dynamic recovery. The Ref Cursor interface allows your code PL/SQL pass a handle to a reference pointing to the SQL cursor, to an external client. Etc.

    The fundamental reason for the use of an explicit cursor interface is mainly that you own and manage bulk made extraction output provided by PL/SQL cursor.

    With a cursor FOR , the motor loop of PL/SQL optimize the loop by extracting block a 100 lines both. However, you cannot access this collection in bulk directly inside the loop.

    With an explicit cursor interface, you specify the size of the extraction in bulk via the clause LIMIT , and you set the variable of collection to use. This allows you to use the collection directly variable inside the loop.

    However, the need to do - code manually in bulk collection - rarely occur in the daily programs in PL/SQL. A line of treatment is both slow and not well fits. And even if your bulk code collects lines, these lines must still be processed one at a time in your code. It is much more efficient and scalable rather write SQL code, and make the engine SQL the line of treatment for you.

  • Need to format the drive due to some problems and having to reinstall Windows 7. I could use the same product key

    Original title: Windows 7

    I am using Windows 7 Home Premium 64-bit SP 1 that have previously been installed then bought my laptop. Product key number is fixed under the laptop.

    I need to format my drive due to some problems and having to reinstall Windows 7. can I use the same product key and where can I get the installer of Windows 7 because I don't have it.

    Thank you

    New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

    This is how the recovery partition is accessible to most popular brands...

    For Dell, press CTRL + F11 directly after switching on the device

    For HP, press F11 directly after switching on the device

    For LG, press F11 directly after switching on the device

    For Toshiba, press and hold "0" BEFORE and during the power upward

    For Acer, press and hold ALT + F10, as soon as you see the logo

    For Asus, press F9, as soon as you see the Asus logo.

    For Samsung, press F4 to the power upward...

    For Fujitsu, press the F8 key directly after the power

    Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

    Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  • Satellite A350 is no longer able to use the WLan

    Hello guys,.

    so... I started using Bluetooth earlier, use of the Internet via a cable... Today I tried to use my WLan again, but it did not work (worked well before).
    So I tried to activate it via FN + F8, but all I can see is activate Bluetooth, one for the WLan disappeared?
    The WiFi light only blinks when Bluetooth is activated. I would rather turn off Bluetooth that not being able to use the WLan.

    I think it's a similar problem
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67514&TSTART=0
    but I really didn't want to install a bad driver or anything like that.

    I use a 32-bit Vista and my PC-Tool says that I use these networks currently (I just copy and pasted because honestly, I have no idea, hahaha).
    Realtek RTL8102E Family PCI - E Fast Ethernet NIC (NDIS 6.0) Version = 6.208.729.2008 MAC address = 00:23:5 A: 05:61:05
    Intel(r) WiFi Link 5100 AGN Version = 12.2.0.11 MAC address = 00:21:5 D: 62:D8:1 C

    I would be so happy if someone could help me fix the problem anytime soon, because I really need wireless capability soon. Thanks :)

    Former Satellite A350 was delivered origin with Vista OS, so at first I would like to know if you use original recovery image (OS) that you got with your laptop.
    If I understand you good WLAN card is installed and registered properly in Device Manager. Can you confirm this?

    I have Satellite A300 and a friend of my A350 but WLAn works properly on both machines so I m a bit confused why the WLAN option is missing when you use the FN + F8 key combination.
    I m wondering why WLAN is detected by the system but ignored by the utility of flash cards.

    I'm don't know if this will help, but try to follow:
    Enter the BIOS and set it to default settings
    Reseat the wireless network card.
    Reinstall the extra value package, and check again.

    If the problem persists after doing all this, you have to do a final check and reinstall the OS using original recovery image that you got with your laptop. It's a way more radical, but certainly more efficient to solve a software problem.

  • I can't watch videos from websites longer. I use the yahoo browser.

    My notebook is HP Pavilion PC windows 7. I can't watch videos from websites longer. I hear the sound but can't see the images

    I always use Yahoo, the update of the browser is the problem.

    Thank you very much for your help!  I need a technician to help me solve the problem.

  • Hello, I have Lightroom and Photoshop CC on a mac and a PC laptop. I bought another mac now and no longer want to use the laptop PC (windows). What should I do to load them on the new mac? First remove the applications from the laptop?

    I have Lightroom and Photoshop CC on an imac and windows laptop PC. I've now bought another mac and want to use the laptop to windows. I need to remove the applications from the laptop first, then download new mac?

    Hello

    Lol you should not remove it. You can turn it off with the signing of the application Adobe CC.

    Reference: connect and disconnect activate Cloud Creative applications

    And then you can install it on your other machine.

    Kind regards

    Sheena

  • How can I create a body section to scroll using a scroll bar?

    Hello...

    Using Dreamweaver, I have a button link to show all the recent events covered by our services.
    I would use a section in this page called 'events' with a few photos and text rolling up, that soon there is more included text.

    This is the best medium I can put some new events took place as my reference, is possible to do in Dreamweaver, or there is no

    another tool I could we for it?

    Please, let me know.

    Gustavo Hevia

    Why not just let the page develop to allow content necessary? Why add an additional scroll on the page bar? Be aware that more scroll bars on the page more difficult, it becomes for your users - and especially for users of mobile devices.

  • After updating, I am unable to use the Control, Shift, arrow down to copy text to the bottom of the Web page.

    In previous versions, I was able to highlight the first 3 or 4 lines of text of 2000 lines I wanted to copy and paste in Excel, you use ctrl, shift, arrow down. When I do it now, nothing happens. I sometimes 2000 lines I want to copy and paste in Excel, currently I have to point out the top left, then drag down to always highlight everything I need. I can't use select all, because he catches pages secondary and other information that I don't want on my worksheet. Any help is greatly appreciated.

    I use shift and the page down, but who can take quite awhile. I wish I could use ctrl, shift, arrow down.

    I booted safe mode and disabled add-ons, and it worked. So I need to go through my Add-ons. Thank you very much, this was very helpful.

  • How to choose the maximum value in a column of a table by using the cursor and iteration

    Hello everyone
    I have a table loan_detail
    and a column inside loan_amount
    now I want to take the values in this table with the cursor, then using iteration that I want to take a max value of him using this slider
    Here is my table
    LOAN_AMOUNT
    
    100
    200
    300
    400
    500
    5600
    700
    I could make using the concepts of single loop, but when I tried to do by using the slider I wasn't able to do.
    Concerning
    Prost

    You can get the maximum value for a particular column in SQL, PLSQL needn't; Always avoid PLSQL so you can do it in SQL. But always as an example:

    declare
    number of Temp: = 0;
    Start
    for news in some loan_amt of loan_detail
    loop
    If (temp
    end if;
    end loop;
    dbms_output.put_line (temp);
    end;

    Edited by: Mahanam January 5, 2011 03:11

  • HP laptop, 2000 - 2a20CA: Page of the screen shrinks by using the cursor key

    Laptop HP 2000-2a20CA

    No. B5R61UA

    It seems the upgrade from Win 7 to win 10 Home edition, in navigation or by using a Microsoft Office program, the windows Explorer.

    When you move the cursor with the touchpad and then listen to select a link, function etc. anywhere on the screen/page.

    The screen will decrease in size to the left or right of the screen or reduce to the taskbar.

    Clues, there is problem Win 10 or touchpad.

    HP 2000-2a20CA, running Windows 10 laptop

    Thank you

    I think I solved the problem because now I think.

    To check the HP site looking for updates to Win 10 and none were found.

    But then I changed my version of Windows to win 8 then rechecked updates and there is an update for the touchpad dated March 2016.

    Downloaded and installed, and everything seems OK so far.

    Thanks again.

Maybe you are looking for