Is PA3512U-1M1G 1 GB memory PC2 DDR2 667 MHz compatible with Satellite A100-847

Is PA3512U - 1M1G 1 GB memory PC2 DDR2 (667 MHz), RoHS compliance version compatible with TOSHIBA SATELLITE A100-847?

Hello

Please visit the page European Toshiba under http://eu.computers.toshiba-europe.com > Products > Options & accessories

It has listed all the compatible memory modules for your laptop model Satellite A100.

By the way: as far as I know all the compatible memory modules are 533 MHz module.

Tags: Toshiba

Similar Questions

  • Is - 2 GB module or a work of memory PC2-5300 / 667 mhz for Latitude D610?

    Shows spec Dell Latitude D610 will have 1 GB of memory by Bank, total, up to 2 GB and also uses memory PC2-4200 / 533 mhz.

    What I was wondering if this can be exceeded and D610 would always be OK:

    • If the memory stick 2 GB would work by Bank, up to 4GB total, assuming that the use of memory PC2-4200.
    • Or, if memory PC2-5300 / 667 mhz would work, assuming that using memory of 1 GB.

    I have above that the technical running in my office and usually faster memory memory can be used, just that it runs at a slower speed.

    Has anyone put in memory in D610 which is faster or more dense than does the spec? Believe it or not, part of the problem is that modern memory is denser and faster, and it is cheaper just get a faster or more dense memory.

    Message edited by Teknouser on 09/26/2008 19:33

  • Satellite A60 does support Kingston 2 Gb 200pin Sodimm DDR2 PC2-5300 667 Mhz

    Satellite A60 does support Kingston 2 Gb 200pin Sodimm DDR2 PC2-5300 667 Mhz

    Thank you.

    Hello

    Satellite A60 supports PC2700 DDR SODIMM 200 pin like on this page says:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=8333&ft=m&St=3

    Only a single memory is expandable! So, you can use only one slot for an upgrade!
    You can use max 1024MB module and memory can be improved for max 1.25 or 1.5 GB. (according to the amount of memory the memory internal)

    The speed of the module can be different! I m not 100% sure, but I guess that the laptop supports a 533 MHz FSB (front side bus) and therefore, you can use the modules of PC2700 memory with 533 MHz speed.

    Best regards

  • is DDR2 - 667 mhz or DDR2 - 800 mhz memory on the s10-2

    Hello, I want to just make sure that this model (s10-2) can support DDR2 - 667 mhz or DDR2 - 800 mhz memory

    and what is memory maximum ram can be updated... ?? 2 GB or 4 GB...

    also, can I find ram gaming/high-performance notebook on the market...? like office

    What ram to games / high performance type can support this model...

    Hello... Quote "backward compatible with 533 MHz and 667 MHz speeds - does that mean..?
    System itself works in 667 MHz... even when you buy and install a 800 MHz Memory Stick... it works with 667 MHz... machine will become not faster, but won't work that means backward compatible...

    800 = 6400 see table...

    Can.   Transfer transfer ModuleName MemClock i/o clock rate
    100 MHz PC2-3200 DDR2-400 MHz 200 400 MHz 3.2 Gbps
    DDR2-533 PC2-4200 133 MHz, 266 MHz 533 MHz 4.2 GB/s
    DDR2-667 PC2-5300 166 MHz 333 MHz 667 MHz 5.3 GB/s
    DDR2-800 PC2-6400 200 MHz to 400 MHz to 800 MHz 6.4 Gbps

    cordially KalvinKlein

  • Satellite U300 - 13 M - 4 GB DDR2 667 MHz RAM upgrade

    Hello dear experts,

    At the moment, I have 2 x 1 GB Samsung installed DDR2 of memory 667 Mhz strips.

    I would like to extend the 4 GB RAM so I bought Kingston DDR2 667 MHz 2 x 2 GB KVR667D2S5 / 2G modules.

    But the computer is not started.
    It does not start with the single module or with two modules are installed.

    If I install set of Samsung 1x1GB + Kingston 1x2Go, computer starts, but Widnows 7 32 bit see only 1 GB of RAM.

    If I update the BIOS, will it work?
    Or any suggetions?

    Thanks a lot guys!

    In my opinion it has nothing to do with the BIOS update. It's the compatibility issue.

    As you already know that your laptop can be upgraded up to 4 GB and you use 2 x 2 GB modules.
    2 GB compatible RAM has PA3513U-1M2G part number.

    I checked the page Kingston and memory module with KTT667D2 part number / 2G is listed as compatible for your Satellite U300 - 13 M.

    You can check it out here.

  • Satellite A100-847 does support 667 MHz memory modules?

    I have an A-847 of Satellite with a Numtxpackets® Centimoa® Duo Mobile technology Numtxpackets® Corea? ¢ 2 duo processor T7200, Numtxpackets® PRO/Wireless 3945ABG network connection and Numtxpackets® 945 PM Express chipset
    Clock speed: 2.0 GHz
    FSB: 667 MHz
    level 2: 4 MB cache
    The memory is DDR2-533 MHz originally, I need to know if my phone supports memory 667 MHz modules.
    How do I know this?

    Hello

    Yes, your device supports 667 Mhz modules:

    http://www.Intel.com/products/chipsets/945pm/index.htm

    It is your chipset and if he takes care of so that you are able to work with these modules...

    Welcome them

  • PC2-5300 667 Mhz RAM for Qosmio F30-141?

    Can I use a PC2-5300 Ram on my Qosmio F30?
    I want to upgrade my ram and I prefer PC2-5300 instead of PC2-4200.
    On the toshiba homepage I didn't understand, but in corsair.com, they have a compatible ram research research for your pc or laptop and he said I can use ram PC2-5300.

    So maybe someone here can enlighten me please.

    Hi Reaver,

    I wonder if your machine is really working with a front end bus 667 Mhz. I mean okay: the RAM but really works with this higher FSB?

    Need an answer and some evidence on this issue. :)

    THX

  • Can I combine DDR2 667 MHZ DDR2 800 or lower on the Satellite A200 - 1 MB?

    Hello guys

    I have a Toshiba Satellite A200 - 1 MB and my uncle also has a hp Pavilion dv6183ea
    and we are facing the same problem, the computer is delivered with 2 x 512 DDR2 667
    We have to increase the Ram but the Ram DDR2 667 is no longer available in our market.
    The DDR2 800 is available
    can I safely use the DDR2-800 on my A200 - 1 MB or use the combination of DDR2 667 with a new DDR2 800 with no problems on my computer or on the computer of the uncle?
    I have windows vista and uncle is windows xp

    Thank you

    Hello

    Usually, you can use modules of RAM and faster RAM module (in your case, DDR2 800 Mhz) would be clocked at 667 Mhz.
    But in many cases, there are problems of compatibility in many cases, the laptop will not start using different Rams.

    So I think that it of better to use exactly the same RAM modules to avoid these problems, but who knows, maybe you could mix without any problem, you will have to try this out!

  • Satego X 200-is that I can use memory live DDR2 800 MHz?

    Hello people,

    Anyone know if my X 200 - 21U Satego really suports memory DDR2 800? In the site of the shop I bought my laptop, there is a possibility to install 4096 MB DDR2 (2 x 2 048) 800 MHz. Is this possible or just a scam or a mistake of the shop? What happens if it doesn\t support and I install anyway?

    http://www.notebook.de/popup_printproduct.php?id=10037&LN=de

    After the price, there is a list of "options" it's option 5.

    Well, I think it should work!

    The week last Ibought approximately 4 GB of memory for my X 200 - 21U of OCZ:
    http://GeizHals.at/Deutschland/a268153.html
    And in my laptop, it works fine!

    Post edited by: ADMIN

  • Set the memory of the Geforce Go 7600 in Satellite A100-819

    I just bought an A100-819, and according to the specifications of the Geforce Go 7600 256 MB dedicated memory. However, when I check the properties I see that it shows 256 MB dedicated memory and 255 MB shared memory. How can I activate this shared memory?

    Hello

    The A100 with NVIDIA GeForce Go 7600 don t support shared memory!
    This graphics card supports own 256 MB memory graphics!
    Could post it please how did you check the amount of memory graphic?

    In my opinion, you must run the DirectX. There, you can check all the details!
    The DirectX can be started with the command: dxdiag

  • Upgrade memory for Satellite A100 - 02 M

    My laptop has 1 GB of memory originally and I want to upgrade to 2 GB.

    I've identified the 2 x 1 GB memory PC2 DDR2 (667 MHz) modules that I need but am confused if I should choose module type PA3512U-1M1G or PA3512S-1M1G.

    Two of these pieces are available in parts of Toshiba, but Kingston lists only the correct PA3512U-1M1G for my laptop (A100 - 02 M).
    The two parts are compatible with the laptop and is one better than the other?

    The price of Toshiba of the 'U' part is rated £14.20 and the "S" £16.54 each party. "

    DRM for info.

    I imagine that Toshiba has more information on compatibility and specifications of the laptop you can use both of them. Now, it's your choice.

    Kingston is also good place to buy Rams. They always offer quality products.

  • I installed new memory will not successfully identify an additional memory of 1 GB (DDR2 PC2 5300 667) in my IBM Lenovo Thinkcentre desktwith Windows XP SP 3

    I installed 1 stick of memory, 1 GB of DDR2 PC2 5300 667 mhz, in the second slot of memory the computer of my IBM think Center Desktop.  On booting, the computer does not recognize the 1 extra GB of RAM.  What is the problem?

    Have you checked that your computer supports only support a lot of RAM? If it is not, it does not recognize anything on its maximum design.

    Are you running 32-bit or 64-bit? The 32-bit version cannot access a little more than 3 GB of RAM.

  • Satellite L30: 667 MHz PC2-5300 memory bar run

    ISIT possible to use 1 GB SODIMM DDR2 667 MHz PC2-5300?

    Hello

    No, it is not possible to use the modules of PC2-5300.
    You must use DDR2 533 MHz PC2-4200 memory sticks.

    .. and Yes, you can use the module of memory 1 GB memory bank!

  • Anyone using DDR2 - 800 MHz PC2 - 6400 RAM on a Dimension E520?

    I have a 8-y-o Dimension E520 with a CPU Q6600 and 4 GB of RAM PC2-5300 DDR2 - 667 MHz.

    Max RAM is 8 GB so I did research what type of RAM would maximize the expected gain in speed.

    According to this articleand this one as this thread of Dell, the E520 can accept RAM PC2-6400 DDR2 - 800 MHz.

    In addition, in accordance with this sheet of Intel chipset 965 on the motherboard will have DDR2-800 MHz RAM.

    I have noticed however that a sweep Crucial suggested DDR2-667 PC2-5300, like upgrading RAM later.

    By no means discouraged, I advanced and bought 4 sticks of 2 GB of RAM DDR2-800 PC2-6400 Non ECC Unbuffered of 240 pins.

    Then, installed the new RAM and started in the BIOS. Of course, the 8 GB of RAM is recognized.

    Then started to Ubuntu. However, the initialization has failed before he arrived at the office.

    Then started to Windows 7 (on the same machine, multiboot). Yet once again, began to start Desktop but bluescreened before that he (0 x 00000019 which seems to refer to the memory problem)

    Reinstall all the RAM sticks and tried again with the same result.

    Replaced the 4 GB of RAM has low gear and everything was fine.

    So, is the RAM purchased dubious quality or not my E520 simply not accept RAM DDR2 - 800 MHz?

    In the interest of anyone else might have the same problem or similar, I put the 4 sticks of RAM to the reseller and received four sticks of replacements of the same specification.

    And they work perfectly in my Dimension E520.

    Thus, in response to my original question, the absence of start-up stems from a faulty RAM.

  • Qosmio G30-102 - can I install RAM DDR2 - 667 Kingston rather RAM DDR2-533?

    Hello

    I have a Qosmio G30 102 and I wanted to spend my RAM to a total of 4 GB (currently I have 2 GB installed with specifications of a PC2 - 4300 DDR2 (533 MHz)). So I searched for RAM, and I wanted to know it would be possible for me to install.

    * Kingston Technology - memory 2 GB PC2 5300 667 MHz 200pin SODIMM DDR2 *. Would it work properly and if so it would be better than doing a (* 1 GB) memory PC2 - 4300 DDR2 (533 MHz) * the standard RAM installed on my Qosmio?

    Thanks in advance for the answers of th

    MB

    Hello!

    To upgrade RAM on my laptop, I used Kingston DDR2-667, and it works without any problems! :)

    Thus, you can use this module Kingston too but I guess that it runs only on due speed 533 MHz FSB of the processor limitation. You can check with a tool of information material such as Everest or PC Wizard 2008 for example the speed of the FSB.

    As far as I know, the laptop can be upgraded to 4 GB maximum RAM.

    Good bye

Maybe you are looking for

  • Problem installing Vista Service Pack 1

    Hello I searched the internet for hours now and have found many people with the same problem but I couldn't find a solution. I just bought software that requires Vista service pack 1 which I thought that I had already but I didn't so I installed it.I

  • I am able to remove a photo from my iPhone, but keep it in iCloud?

    I recently started using iCloud to save photos and videos of my iPhone to help in freeing up space.  I then went to remove pictures/videos from my iPhone and I get a pop up message saying that the photos/videos all so deleted my iCloud storage.  Mayb

  • long pull down the menu with no vertical scroll bar

    People, It's been 3.5 years ago when we had to learn that there is no way to have a long drop down menu control without a vertical scroll bar. See http://forums.NI.com/NI/board/message?board.ID=170&message.ID=217428&query.ID=395029#M217428 Now, after

  • Installation of XP SP3 causes startup problems

    Just done the SP3 download and now Windows won't start.  It goes into a loop, if I try to boot into Normal mode.  Only way to start Windows is in Mode without failure.

  • Is there when even install Vista with USB?

    Separated from this thread. Is there when even install Vista with USB?