Is printing A3 in the possible HP Deskjet 2050?

Similar Questions

• Printing problems with the new HP Deskjet 2544

  I just bought a HP Deskjet 2544, and it appeared to install fine.

  I could print the diagnostic report, alignment page and test page, etc., but when I got to print anything else, although he looks like he gets "ready to print" and the green line would go up 100%, nothing came out of my printer.

  Trying to solve this problem because on the last 4 hours and I'm going out of my mind! I tried HP online support, Windows supports, uninstalling and reinstalling.

  Someone at - it ideas? Thank you.

  Hello NatTwibbler,

  Welcome to the HP Forums!

  I understand that you are unable to print a document using the Deskjet 2544. I will do my best to help you! First, what is your operating system on your computer? Click here to read: Windows.

  I recommend the continuation of this entire HP document on print jobs are stuck in the print queue. Try to restart the print spooler that according to the document.

  Please post your results, I'll be looking forward to hear from you.

• How can I check the levels of ink on deskjet 2050 on Windows 8?

  How can I check the levels of ink on deskjet 2050 on Windows 8?

  Hello

  If you do not have the full features software download and follow HP printer Installation Wizard to obtain and install the latest version of the software automatically:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & JumpID = ex_r4155/HHO/IPG/ccdoc/piw / & softwareitem = MP-115766-2

  Once you have the complete software use the Hp software to locate the estimated ink levels, you can access it from Windows 8 start screen by clicking on the icon HP Deskjet 2050:

  http://support.HP.com/us-en/document/c02049595

• HP Deskjet 2050 does not print with Yosemite on Mac 10.10

  I have a deskjet 2050 j510 series.  I have Yosemite on my Macbook Pro 10.10.

  Printer scan, but when it is supposed to print, it send the document to the printer, it shows and show it is printing but nothing comes out of the printer.

  Can anyone help?

  Thank you

  Hi @NBrand and welcome to the Forums of HP!

  I see that you are having problems printing. I would like to help!

  Are you connected USB or wireless?

  I have a few suggestions:

  First, uninstall the old software:

  • Uninstalling the printer software.

  Then, check and repair disk permissions:

  • On the service repair disk from disk utility permissions.

  After the repair, run the Apple updates:

  • OS x: update of OS X and Mac App Store apps

  Once updated, reinstall the printer:

  • Drivers and software HP Deskjet 2050 / 2050 all-in - One Printer full features J510 Series A

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Deskjet 2050 3 in 1 printer, I want to just take the text black print outs

  Hello

  I recently bought

  HP Deskjet 2050 to my house

  My use is very limited and I want to just take black print out my pages of text

  So is it possible that I can load the printer/computer to never use the color cartridge, even if there is something of color on the page

  Thank you very much

  You can try it but your printer is unlikely to work properly. You'll start to see the Virgin and strangely colored printed pages.

  Kind regards
  ERICO

• HP Deskjet 2540: installed printer now get the HP StatusBl.dll error

  I have a new Dell computer.  I have a Windows 7 with a free upgrade to a Windows 10.  While Windows 7 I have intalled a HP Deskjet 2540 printer then computer upgraded to Windows 10.  Now on Windows 10.  I uninstalled the printer HP Deskjet 2540 and now get the HP StatusBL.dll error every time when I start the computer.  I drive and looked at disk to find L4uninstall.exe and can't find it.  The disc has a Util directory but no directory of CCC in the Util directory.  How can I get rid of this error at startup of the computer.  I love the HP products!

  Hello

  The error returns after a shortcut remaining once the software has been uninstalled.

  From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
  Delete the shortcut to monitor alerts to 2540 printer ink and the error should appear is no longer.
  
  Kind regards
  Shlomi

• DeskJet 2546 b: Wireless print job stays in queue and poster printer offline after the upgrade to Windows 10

  I write a fix I found for a pretty annoying problem involving 10 Windows and HP wireless printers.

  My Deskjet 2546-b printer was printing OK wireless to the point 8.1 of Windows until that I upgraded my computer to Windows 10. Immediately after I upgraded to Windows 10, I could not scan, so I reinstalled the printer software and has worked for a day or two and then the printer would print not unless I restarted the printer or the computer - sometimes 2 or 3 times. This went on for a few weeks, sometimes it would be nice, sometimes, usually after the computer restarts, he would simply go offline. Once, he went offline 3 times when I was printing about 20 postage labels, recently he went 1 week without any problems.

  Long story short, after a lot of troubleshooting and to help a friend to HP, I found the problem to be associated with the WSD/service Port in Windows 10. My printer still maintains a stable connection with my Netgear router (wireless to the printer light stays on blue) and I was able to scan from the HP software and I could ping the printer... but printing would be just stuck in the print queue (the spooler service) and the printer showed offline in the queue, hardware and windows devices , or when printing from a program like Windows.

  I learned that if I went in devices and printers, until I sent a print job, if the printer showed offline, I could save time by restarting the printer simply and he would come every time (less painful) online.

  

  But it's just a solution and not a solution.

  Nothing worked... not even print and scan doctor. The final fix that worked was to define an IP address manually for the printer, and then I put the print driver to use a standard TCP/IP port.

  Here is the step by step. Your printer must already be connected to your network (solid blue on printer).

  Step 1: Make sure your printer uses a manual IP address

  (1) to obtain the IP address of your printer:

  • If your printer has a control panel with a menu, it's easy... Just look in the settings menu without wire/report and write your printer IPv4 address.
  • If your printer is not a menu of fancy and repower the computer and printer HP Print and Scan Doctor network menu display use (wireless), or you can connect to your router from a web browser (usually 192.168.1.1) and look at attached IPs (like me). Some printers can also print a report of the network when you hold down some buttons everything back up and running, but you will need to search the web site of the Internet or HP to find the process for your printer model - the report displays the IP Address of the printer.

  (2) once you have the IP address of the printer number, type this information in a web browser... like 192.168.1.x (where x is the last number of your printer)

  Web page of the printer should find - otherwise, use another browser (you can use a tablet or iPad if you want). HP has several different forms of printing of web pages (embedded web servers) depending on your printer model, but they all have a large number of parameters.

  (3) since the network tab or section, look for a manual IP address configuration.

  

  (4) suggest an IP address or type in a new.  I've personally used suggest and then replaced by the last number 241. You want to use a high number, something in the order of 240 to 250 to reduce the risk of problems caused by your router assign this number to something else on your network. Note the 4 digits for the new IP address manual, you will use them later.

  5) click apply and close the web page of the printer.

  Step 2: Make the print driver using the manual IP address of the printer

  Open the devices and printers in Windows, right click on your printing device and select printer properties. Follow the prompts to get the WSD port and on a new local port...

  

  1) click on the ports tab.

  (2) add the Port.

  (3) click on after the first screen, and then click new port type.

  (4) enter the IP address of the printer.

  (5) next.

  (6) select the new port.

  7) click OK.

  You have now two pilots displayed in the printers and devices window, you can now print... but you might not be able to scan and the HP printing software may not work as he might want to lets you add a new printer when you open it... If Yes, proceed to step 3.

  Step 3: Remove print devices and install a new one.

  Need to do this to get the software back HP synchronized so you can scan.

  (1) right click 2 print devices listed in the window of your printer and remove them by clicking on remove device.

  (2) open the HP printer Assistant software (from the icon on the desktop or you can search Windows by using the name of your printer).

  (3) installation/add a new printer... go fast and a new device icon is added to the printers and devices window.

  4) return to the printers and devices window and open the properties of the printer again for your printer icon.

  5) go to the ports tab (yet) and you'll see a new selected WSD port, select Port Standard, you created earlier in step 2.

  (6) you have now two print devices in the window (again), but now everything should work.

  These two devices alone from here on out. Do not remove one and everything should work fine. At least it worked for me. I hope it works for you. I'm hoping a Windows update resolves this problem soon, I see many people who cannot print or scan wireless after they upgraded - not just the stuff of HP.

• DeskJet HP 2542: hp 2540 won't print documents from the computer, but test print and network configuration page

  My printer hP model 2540 series deskjet A9U27A not print from my computer. It passes over the Network Setup page test, also has good test print. The printer is set up wireless. Have you tried the scan and printing doctor, but it says there is a software problem. I've uninstalled and reinstalled the software with the original disc, then provided with the software most up-to-date of HP. I did this step several times. Tried several drivers. Tried a static IP address. I'm through with this printer. have also tried to this cycle. Also tried to reconfigure the system. Nothing seems to work. NOTE: When I got this printer I got the same problem, but since it was under warranty Hp remotely solved the problem. They said that the issue was the software so they installed a kind of universal software. Can someone get to the challenge to help me solve the problem printer? Thanks in advance for any help.

  So after a search much more, someone else came up with a solution to my problem. For windows users, it is a question of the evolution of the drivers. A specifically. The 990c driver. I'm not sure of the exact user or the subject header, but it goes like this for windows vista.

  1. click on start

  2. click on Control Panel

  3. click on printers

  4. right click on the printer in question

  5 point to run as administrator, and then click Properties

  6. click on continue

  7. click on advanced

  8. click on new driver

  9. click on next

  10. click on HP under manufacturer

  11. under printers, click HP deskjet 990c

  12. click on next

  13. click on finish

  14. click on apply

  15. click on ok to close

  This is very similar for all windows programs operating.

  with a little research, you will be able to find the exact measurements for each operating system

  Hope this helps all who have the same problem

• HP Deskjet Ink Advantage 4615: Printer is deleted when delete print queue of the printer in Win8.1

  I right click the "Delete the print queue" option in "devices and printers". Who deleted the default printer and also removed the icon of the printer. The system then made the fax printer HP 4610 series the default printer. I re - install from the web HP printer drivers, but the HP 4615 icon does not appear with the other printing devices in "devices and printers". In each application, I need to select the HP4615 now that the printer before I can print. If I click on "Add a device" or "add a printer", the HP 4615 is not picked up. If I select "printer queue", then it shows the HP series fax and printer HP4615. How can I get the system to display the HP 4615 icon so that I can make my default printer?

  @Pietcar,

  I hope you're well and welcome to the community of HP

  I read on how you had removed the icon of the printer Deskjet Ink Advantage 4615 of devices and printers and since then have tried to reinstall the printer, which does not have the icon back to the printers and devices section, leaving you to not be able to select the 4615 as default printer.

  Here are my suggestions, starting with:

  1. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Let me know what the results detected please. (Select difficulty printing when you run the PSDr)

  2. run the HP printer install Windows Wizard to find and install the driver "Full Feature" printers and software and go through the installation to see if there are errors or if the installation fails at any point.

  Check the devices and printers again to see if the printer icon appears. Also try to restart the PC to see if that helps.

  Please keep me informed of the result!

  If one of my suggestions, helped to reach a solution, I ask you to click on the button "Accept as Solution" please and thank you! If you want to send me a 'thanks' for my answer to help today, click on the thumbnails below.

  

• Printer HP Deskjet 3050 a: decrease the size of the font in Deskjet 5030

  I'm changing the font size to a smaller size on a printer HP Deskjet 3050 has J611g.  My printer was printing to the appropriate size.  Suddenly, on a project he printed normall until it came to the last page, the date on which the font size became so great that only 1 or 2 letters would take on the page.  The next time I tried, each page was so great that only a few letters were on the page.  I don't know if I accidentally hit something or changed a setting that I should not have done, but I have no idea how to make to make it smaller.

  I tried Googling with the search term: how to change the size of the font on the printer HP Deskjet 305 a.  Almost all terms had to do with the increase in the size of the font.  I have quoted me a procedure on the eHow site, but it does not seem to apply to this particular model.

  I also tried to search the HP website problems.  Again, it would either mean that no search term

  has been found or each question had to do with the increase in font size.

  Any help would be greatly appreciated.  I have an important document to print, and I already spent two hours trying to solve this problem.  With my luck, it will prove to be something simple!

  Sorry only you know which software you use to print. When you select PRINT, this is the printer control software. You need to know how to find the font size and decrease and make sure that you are not in any type of "zoom" mode.

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.

• HP DeskJet F380: HP Deskjet F380 print pages in the wrong order

  By printing on both sides manually, I often use odd/even pages options to print more quickly than the management of every page on its own. However, with this Deskjet, my pages and pages of documents THAT ALWAYS get messed up would be in the sequence of sequences in a weird order break; lose my ink and my papers!

  How can I fix it? This has happened far too many times

  Hi @Itsyvonnely,

  Welcome to the Forums of HP Support!

  I understand you have some problem with the pages print is not in order when you use the manual duplex function. I will definitely do my best to help you.

  What program are you printing from?

  Try to print a document duplex from another application.

  If you are using MS Word, I suggest you repairinging software, How to troubleshoot print failures in Word.

  To check the printer driver, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  To see if the driver software is up-to-date, d download and run The printer installation wizard The HP printer wizard detects automatically the best print available for your HP printer driver. It is only available for Windows 7, 8 and 10. 

• HP Deskjet 3540: Unable to print documents using the HP Deskjet 3540 (network)

  I am printing documents using the HP Deskjet 3540 of difficulty.

  All options in the print dialog appear to be blocked.

  I've uninstalled and reinstalled the software nothing works. HP Print and Scan Doctor offers no help.

  Screenshot below

  Any help would be greatly appreciated.

  

  X-23 you are the boss.

  I followed your steps and was able to print a test page for Word, PowerPoint and PDF. I also printed a picture on plain paper in full transparency. I was also able to quickly implement the project and printed without a problem.

  I have not tried to print a photo on photo because of the low ink level paper but I'd be surprised if I'm not able to.

  Thank you for your kind and your patient attention to the problem I was experiencing.

  It's really appreciated.

  Prosperous 2015 for you and yours.

• printing with printer deskjet 2050 using the black cartridge only

  printing with printer deskjet 2050 using the black cartridge only

  all solutions? PLIs answer me. thanx

  Hi d33com,

  Follow the steps below to set the black ink only.

  1. open the printing preferences (step 1)

  2. click on the Advanced button (step 2)

  3. click on the drop down arrow next to the print in grayscale to change black ink only.

  

• HP Deskjet 1050 J410 printer: cannot display the estimated ink levels

  Something has changed on my system, so I cannot view the ink levels on my printer Deskjet 1050 J410 estimated.

  When I select the icon "HP Deskjet 1050 J410 series Properties", he used to be option to view estimated ink levels.  This option is gone.  The 4 options that appear now are: 1) the HP printer Assistant (which does nothing), 2). Set preferences, 3). See what's printing and 4). Customize your printer.   None of these options show ink levels.

  I have uninstalled/reinstalled the printer software HP using the DVD supplied with the printer.

  I deleted the printer (using the control panel) and then reinstalled the printer device driver.

  I unplugged/replugged the power and USB printer cables.

  I farm/powered down the system.

  None of the above fixed the problem.

  I'm as Windows 7 Home Premium with MicroSoft's latest fixes.   I don't know when this problem appeared - I noticed when I was printing and got a warning message about the low ink level.

  No idea what caused this problem and how to fix?

  Thank you

  rockydean

  I searched the Internet and found something that solved my problem.   The link to information is:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-109416-2&CC=US&DLC=en&LC=en&os=4063&Product=4027465&sw_lang=

  I do not uninstall anything - just clicked on download.

  Now everthing is great to work with the HP printer Assistant.   Finally.

  rockydean