Is Satellite A300-15 b compatible with Windows XP Home edition?

Gys help me. I need to know in order to do my job.
Thank you


To be honest you can check only. Visit the download page for Toshiba under > support & downloads. Choose your model of laptop (PSAJ4E) then WXP as operating system. You can see if the drivers for Windows XP Home edition are listed.

Post the output please. ;)

Tags: Toshiba

Similar Questions

  • Is Satellite A300-15 a compatible with Windows XP?

    Help, please. I don't have a 15 b model.

    And what is the short model no?

    Post edited by: Admin

    Seems that your question is already answered here:

    By the way; the * Satellite A300-15A * belongs to the * PSAJ4E * series.
    The model number should be mentioned at the bottom of the unit ;)

    And Yes, your laptop is Win XP compatible I really t know why ask you the next question. Really strange

  • Satellite A300-203 - need drivers in Windows XP Home edition for the HDMI output

    Hello world!

    Given the poor performance of Vista, I decided to install XP on this machine. I installed all the drivers (from the Toshiba Site) available for my laptop XP, everything is a work, * but HDMI Out does not work *.

    I tried to install the driver Vista 'HDMI CONTROL MANAGER' (XP specific drivers for the hdmi not available on the toshiba support site). HDMI worked after that on my TV but then I got a blue screen, the operating system crashed. I decided to uninstall the driver again just in case.

    Is there a solution to get the HDMI out works under XP? A good pilot? Something reliable?

    Thanks for your help!

    Greetings from the Spain


    My U400 supports HDMI port and I installed Win XP on it.
    I didn't install any control HDMI for Vista Manager
    It was not necessary!

    My Win XP is updated, I installed the graphics driver and all the other drivers, the tools available for Win XP!
    That was enough to get the job of HDMI

    You must ensure that your BIOS is up to date.
    In addition, you must install common Module utilities, controls and don't forget that your graphics driver is up to date!

    Then, you would be able to use the FN + F5 to switch to the TV

  • Satellite A200 - need ACPI Driver for Windows XP Home edition?


    I have a Satellite A200-13U Notebook and installed WinXP top.
    I found all the drivers, but the ACPI driver is missing and I can't find it.

    Can someone help me please?

    At the moment there is no help. I'll tell you why. To resolve this problem, you need to install the 'password utility"or"Utility supervisor password". This issue is described on the document tracking descriebe Briefcase with Vista, but I presume that it is the same with Windows XP Home edition.

    So the problem is that this new A200, there is no Windows XP Home edition utility. For now A200 is not supported WXP.

    Pilots should be available!

  • Bootsect.dat file is corrupt, NTLDR is missing/compressed on x 86 pc with Windows XP Home Edition Sp3 and Ie8

    I have a x 86 pc with Windows XP Home Edition SP3 and IE8.

    While preparing for a possible update for Win 7, I thought repartioning and "multiboot" my HARD drive.

    I tried to get WinXP operating as best I can.  I was also check out how to use the Windows Recovery Console to reinstall WinXP and transfer files to a clean reinstall.

    Found while searching "All boot paths" to Start\Run\msconfig\BOOT. INI that one boot path has been highlighted with errors indicating that "file is corrupt because playing a disc error has occurred" and that NTLDR is missing or corrupt.  In fact, it is blurred.  It points to "Recovery Console Microsoft Windows/cmdcon.  I've not used the Recovery Console, ever.

    I have a desktop Gateway 5310 S (detail) and no original XP disc, apparently.

    I have, but never used, a 4ea. set of recovery CD as of 12/05/05 I need to have created after purchase.

    I also had many, odd, problems that come and go, including worth displaying various websites, Yahoo Home Pages and E-mail that keep switch to compatibility mode or outright deletion.  The video and audio on Hulu and video-on-demand online services are always out of sync.  I have problems with editing posts on sites like this even if I can edit my profile fine pages.

    This particular set of problems started recently and very suddenly, from one day to the other.  It was after he worked actually pretty good for a change.

    I don't know how long the boot.ini file has been damaged, I actually discovered by chance.

    I can also not to reinstall some programs such as Family Tree Maker 2005 and 2008, when it was suggested to me by to uninstall/reinstall.

    I have the latest Java and Adobe Flash Player.  I've defragged and disc verified my discs.

    I used CCleaner to delete temp and unwanted files per day.  I ran Hitman Pro, MBAM, MBAR, MSE and SAS several times without detected virus or malware.

    And, as I mentioned above, I have problems with the editor of this site, right now.  Sometimes it just freezes and I have to leave to clear.  Other times it's duplicating entire sentences.  He also flip/flip flops between a Publisher full page and, as now, a half page window of the editor on the half left of the page.

    Suggestions from what people you can come would be greatly appreciated.  This gets really annoying.

    Thank you


    When you check the paths in the boot.ini file, and the recovery console is installed, you will always get an error message indicating that the startup path is not valid.

    If the recovery console is actually corrupted just to uninstall, you can reinstall or burn a cd with the recovery console.

    go here for instructions on deleting the recovery console.


    Here's how to make a bootable xp recovery console cd

    Courtesy of JoseIbarra

    You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

    Here's how:

    Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    RC. ISO

    Download the ISO from here:    (courtesy of Daavee)

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.


    as for the other problems:

    did you use Registry cleaners?

    These can damage your system

    You seem to be free of infection, it would seem that a part of your process cleaning has removed a necessary file.


    Checkdisk with parameter/r should be run. and run it again until there is no error.


    you are fully updated and patched to Microsoft updates?

  • HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

    HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

    You need an external DVD drive to get the repair will.

    Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

    The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

    A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

    See this page from HP

  • I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading \3\DLBUtime.dll

    Error loading \3\DLBUtime.dll

    I have a Dell computer that came with Windows XP Home edition.  When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module

    I just click 'ok' and he goes, but, as for what it stop popping up everytime I start my computer.

    Can someone help me with this?


    You are LuLu5119, who posted a question last August?

    If this isn't the case, you should have started your own thread.  If so (and even if not), you should have responded to questions about Dell printers.

    Assuming that you complain of a "Error loading \3\DLBUtime.dll" message that appears when you start your computer, you should know that the DLBUtime.dll file probably has something to do with the software from Dell which has been partially deleted, but could also be indicative of malware as well as partially withdrawn.

    In both cases, the best way for start you to prevent the message at windows is to download Autoruns

    Install the Autoruns and let it complete the scan of your computer.  Then click on the "Connection" tab and uncheck the following entry:

    Look for an entry that has 'DLBUCATS' in the first column.  If you do not see that, look for "rundll32 \3\dlbutime.dll" in the last column ("path of the Image).

    Uncheck that entry, close Autoruns and restart your computer.  You should get is no longer the message.

    If for any reason, you find later that you need dlbutime.dll running, run Autoruns and check the box. If you decide that you need never again, run Autoruns, right-click on the entry and select Delete.

    As General precautionary measure, in case your entry dlbutime.dll was related to malicious software, rather than the Dell printing software, download the following free scanners:

    MalwareBytes Anti-Malware:
    SUPERAntiSpyware Portable:

    For MalwareBytes Anti-Malware, download, install, update and run.
    For Portable SAS, follow the instructions on the Web page (note that the instructions assume that you use a different computer to download; if you're not, just make a note of the name of the file).

  • How do I create a new user account with windows XP Home Edition after operational failure

    How do I create a new user account with windows XP Home Edition after operational failure

    Hi andyprice,
    -What is the operational flaw that you speak?
    -You receive an error message when trying to create a new user account?
    Write us with more information pertaining to the matter to help us help you better.
    In the meantime, you can refer to this article:
  • When I start with Windows XP Home Edition, the screen appears, only the mouse arrow. Help!

    When I start with Windows XP Home Edition, the screen appears, only the mouse arrow.  Help!

    Hi stevejager,

    ·         Remember to make changes?

    ·         You receive an error when starting?

    ·         Have you tried booting in safe mode?

    Method 1: First of all, we will try to start the computer in last good known Configuration and see if it boots.

    Method 2: If it is impossible to start, try to start in safe mode. If able to start and then try to perform a System Restore, since this is a recent problem that has occurred.

    Method 3: Follow the steps in the below article mentioned.

    Computer stops responding with a black screen when you start Windows XP

  • Have a Dell PC with Windows XP Home Edition with restoration, internet and the program of the questions that I went into the details in the body of the present.

    I have a Dell with Windows XP Home Edition system that uses the internet connection. Friday, he had a problem with images in line being "pixel-ed", which means that the image was blurred and boxes. So I did a restore of the system back as much as she would in July and concluded that the IAF has a program called accelerator that had been implemented to go faster, but eventually would make very good images. Then, I got that part fixed but now a game that I play "Mahjongg" won't play right and when I go to the area "help and support" to try to reschedule, so it don't open even now. Can someone help me please? Thank you

    Thanks for the help. I returned and reinstalled everything, even if it was already installed and now everything works.

  • Canon S820Printer my printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full.

    My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print.  Ink tanks are full.  What bad past and how to fix it?

    If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads -

    If all goes well.
  • On Satellite A200 (PSAE6E) FN key works only with Windows XP Home edition


    I just get my Toshiba Satellite A200-2BH, (PSAE6E), included with windows Vista. I'm not comfortable with that OS so I formatted the hard drive and install win XP pro SP3 all seem to be fine with the driver downloaded from driver support Toshiba on the line, but the FN key do not work in certain combinations, for example:
    FN + F5 or + F6 or + F7 do not work
    someone say online in this forum that I should install updated BIOS, but this note on the Toshiba support website me resist:

    * "This Bios update adds functionality to your system *."
    * This Bios is NOT compatible for notebook computers equipped with Windows Vista! "*

    What should I do?
    My current setup is:
    Satellite A200 PSAE6E with WXP PRO SP3 with the FN key does not
    Should I install this update to fix this problem?

    Please help me with the path I should follow
    Thank you very much

    FN feature under Windows XP Home edition is supported with the latest version of the BIOS update. So don't be afraid. Download the right BIOS update and update Windows XP Home edition.
    Before start you BIOS updated to close all running applications and make sure that the laptop is connected to the power supply do not do this with battery power!

  • How to disable the touchpad on Satellite L300-19F with Windows XP Home edition?

    Toshiba Satellite L300-19F, who was with windows Vista
    I installed windows XP and everything works fine.

    Since I'm on USB mouse to run I want to disable the Touchpad, but when I press Fn + disable key for touch pad it does not work.

    Need help.
    One can tell me what the problem is?


    To disable the mouse pad, you can go to control panel-> mouse control and disable the mouse pad, or you can use FN + F9.

    Kind regards.

  • Chinese programs is not compatible with Windows 7 Home Premium?

    I was hoping to find can run Chinese programs and show the characters without the language pack in windows 7?

    Under Vista, I can't read my Chinese games because he presents himself as funny signs. Will this be a problem on Windows 7 if I do not use the Ultimate Edition and the language pack?

    Hi pchau,

    Thanks for posting in the Microsoft answers Community Forums.

    In Windows Home Premium, you will not be able to change the display except French, Spanish, German, Japanese and English language.

    To change your display in Chinese language, you need to purchase Windows 7 Upgrade Ultimate License.

    After that, you must download and install Multi User Interface Language pack from Windows Update and install it to modify and use your programs display in Chinese language.

    ·         Please see the link below for how to do to get the additional display language and edit them. How can I get additional display languages? To check the programs that are compatible with Windows 7, including your Chinese programs please refer to the link below,

    Hope this information helped you.

    Kind regards

    Arona - Microsoft technical support engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • A product that needs Windows XP SP3 + will be compatible with Windows 7 Home Premium

    I have Windows 7 Home Premium and I want to buy a product of heart Math that says Windows XP XP3 +.
    What I need to be upgraded or it would be compatible?

    Windows 7 has a feature of executing programs that are compatible with a previous version of Windows. If you have Windows 7, then you can run programs that are compatible with the following versions of Windows: -.

    1. Windows 95
    2. Windows 98/Windows Me
    3. Windows NT 4.0 (Service Pack 5)
    4. Windows 2000
    5. Windows XP (Service Pack 2)
    6. Windows XP (Service Pack 3)
    7. Windows Server 2003 (Service Pack 1)
    8. Windows Server 2008 (Service Pack 1)
    9. Windows Vista
    10. Windows Vista (Service Pack 1)
    11. Windows Vista (Service Pack 2)
    12. Windows 7 (obviously)
    In your case, you want to run a program that is compatible with Windows XP (Service Pack 3) , then I don't think there should be a problem to do so. Is there a programs on Windows 7 Compatibility Wizard, which helps you run programs that are compatible with a previous version of Windows. You can follow the following steps to run the program compatibility Wizard.
    1. Open the program compatibility Wizard by clicking the start , clicking Control Panel, clicking programs and then click on use an older program with this version of Windows.

    2. Follow the instructions in the wizard.

    If you are unable to install a program, insert the installation for the program and, using the wizard disk, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.

    To change compatibility settings manually for a program, right-click the program icon, click Properties, and then click the Compatibility tab.

Maybe you are looking for

  • How can I move my favorites in the menu bar of the bookmarks toolbar?

    Once I upgraded my firefox to version 6, all my favorites that were previously in my bookmarks bar are now in the menu bar and the bookmarks bar appears just with no button. How can I move back to their own bar bookmarks? I would like to hide the men

  • Satellite Pro 4360 - HARD drive replacement

    I have a SP4360 with v.nosey 12 GB of HARD drive I want to replace. In the technical specifications for the 4360 it is listed as EIDE. I looked on EBuyer and there are a couple of replacement if necessary:Western Digital Scorpio 40 GB EIDE LP 2.5 540

  • The music plays constantly, unknown source?

    Hey havin a problem here. My computer is constantly playing this horribly inflatable music in the background, and I can't turn it off. None of the media players seem to play, and it is not coming out of the web browser. Just sort of, it started when

  • Financial statement for line above a certain value

    Hello How can I do for the analysis of an array of strings of x and are data and output the line containing the data exceeding a certain value. I have attached a vi that I started to work on, but don't know how to do for x and y of output data above

  • Play music on a mp3 website

    Site that requires the use of browsers Google Chrome or Mozilla to download music MP3. Problems with the site playing music, listen to songs for a bit but then stop then start again. When artists choosing to listen will apparently to always to start