Is the a similar to the old central action for older versions of Photoshop where the individual could until load and down load the web site actions

Similar Questions

• Layer mask groups converted from work plans to the size of the artboard in older versions of Photoshop

  I wanted to start this post as an idea, but I couldn't choose communities (it wouldn't let me), so here it is posted...

  ----

  Just came across this with a customer...

  I use for a mobile design project work plans, and I just got a screenshot with some texts asking why among work plans were really great. Way bigger than a phone. (I'm under NDA and cannot post the screenshot, but imagine there are a lot of iPhone size work plans and two of them seem to be at a right angle)

  I opened the file and on my end, everything is the right size. Remembering the weeks ago to tell the customer that they need to update their version of Photoshop for all this work correctly, I have take a look at the screenshot and see that they are on CC2014 - none of the work plans.

  What I'm asking here, is that, since we have data, plans of work are objects of a defined size and 'alive', why not just use these data to hide layer groups at the opening of the PSD / PSB (PSB in my case) in older versions of Photoshop?

  It could save you a TON of hassle and confusion.

  Hi Zack,

  High level to your query response is: no, there is no conduct business case for a general solution to what you are suggesting. So I don't see what is happening.

  I say that as someone who likes to give back and forth and backward compatibility.

  There are two parts of the problem that you raise. They are related and somewhat intertwined.

  1. Having the version previous (2014) do something reasonable with the data from the version the most recent (2015). Either the old version should be taught on the most recent data so it can make a decision about what to do, or the newer version must put additional data in the file format for consumption by the older version.
  2. Back and forth between versions. As you say, a much more difficult problem. In fact, we do a good job of that today. But we must be sure that whatever we do for (1) not to damage and back the wrong way.

  Let's be very clear: 2014 will not be touched, except for critical bugs, absolutely. And even before 2015 is released, it would have not been corrected to make it behave better with work plans. There is no way that I could see what is happening. So all we have done for better backward compatibility had to be entirely done within 2015.

  For the round trip, the general problem is something like this: we want to 2014 to read an object that has properties of 2015, he does not understand. While we might learn ch to keep these properties as opaque property, must also have rules for when these properties are not valid and thrown on the floor. Probably, if the object is changed. But not always. And sometimes when another object parent is changed. And so on. Right now, we destroy them unknown content from their reading in the old version. Make us and record what we understand. As a user, you receive an alert telling you that we are do this. It's the safest thing to do.

  There are special cases where a developer can see an opportunity to preserve a level of backward compatibility and back and forth. We try to do if we believe that it is safe. But this scenario happens only occasionally.

  In the case of work plans, made us really think about this: If we added a mask to the group for backward compatibility, it should do something with this mask reading around 2015. And what would happen if the user edited this mask in 2014 and opened upward in 2015 - and who edited mask do not align with the structures of the artboard? Things started to get dark quickly. We started to see traps. The workflow together to sheath special round trip had to be tested and verified. The cost was rising and this expense must be filtered through a cost/value trade-off. And then what happens when we add a new property to the structure of work plan? At these efforts for nothing?

  So we compromised with what you have today. Work plans become groups in 2014. The Group and the layer structure remains intact. Doesn't secretly add us and remove masks for the round trip. You can safely change the groups to your heart's content. When return you this document in 2015, you redo the work plans of the groups. Was not clear and safe way to do more than that given the time that we had.

  Take a step back and think about your problem, it doesn't seem to be a value to a script that converts group work plans + layer masks for your workflow to have your documents that is consumed by the customers of 2014. This would be carried out in 2015 because she would need understand the work plans. And maybe vice versa from 2014 to 2015, assuming that the documents were not published in a hostile way. We're not likely to write such a script as a generic tool, but someone competent with script might be able to do this.

  More that I intend to write, but hopefully, it gives you additional insight in the compromises that we have faced.

• I just bought a new computer and re-installed Firefox. Now, when I surf I get no attention (or not) of symbols showing how security is the Web site. Why not?

  On my old computer with Firefox, when I used a search engine and keywords, all sites that displayed had a color code beside him who showed how the security of the Web site was or was not. On my new computer w / Firefox, I get no color symbol showing the security of the site.

  Hello, this is no functionality to firefox integrated but provided by an extension, likely of WOT. You can just add it as addon on your new system again...

• OfficeJet 4635 cancel the firmware update because my ink cartridges are for older versions of the product

  I was happy with my officejet 4635 until I clicked on ok to apply for the HP firmware update. He said that it would improve my printer. However, demand has not said that my ink cartridges may not work if I installed the update. I clicked on ok and the update has been successfully installed. Now I can't print anything because I get an error message saying the I have ink cartridges are designed for older versions of the product. I do not use the new HP cartridges because they cost too much. I used cartridges refilled abacus in Az. Phhoenix which worked fine up until I did the update of the firmware of HP. I need to go back to the old system, so I can print again. I am connected to a desktop computer HP envy running windows 8.1. I'm furious HP to try and force you to buy their new cartridges with an update of something. I think that whoever came up with this update should be fired. Any help with a solution would be appreciated.

  I was told that there is no way to undo the update of the firmware. HP did send me a few ink cartridges so I could print again, but I am still ticked about the way this has been ensured by HP. They have not told me that my old version cartridges would not more work after updating firmware. I think that it is simply dishonest on part of HP and I am sure that other customers have been captured by this update of the firmware. I am sure it was a HP effort going to force you to use their new cartridges. I'll be very careful on the acceptance of the updates from HP in the future.

• Any time I try to access the web site GOOGLE, this message 404 not found (nginx)

  Any time I try to access the web site GOOGLE, this message appears.

  Any suggestions as to what is the cause and what is the fix.

  Thank you

  Hi LindaPhillion,

  1. Did you the latest changes on the computer?
  2. What web browser do you use?
  3. Are you having similar issue with any other search engine?

  You will usually receive this error when Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

  Get help with the Web site (HTTP error) error messages.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors

  Note: Above article also applies to Windows XP.

  Note: Try the step only if you are using the web browser Internet explorer below.

  Refer to the article below and try the steps mentioned, check if it helps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

• can someone help me and show me how easily an e-mail website links to friends. How to import the address book (yahoo mail) personal information manager to send the links to the web sites of my contacts.

  can someone help me on how to e-mail easily links to websites with friends. also need to know how to import the address book for (yahoo mail) personal information manager to send links to the web sites of my contacts.

  Hi Claytoncharles,

  I suggest you follow the link provided below, which has the similar problem

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/trying-to-send-page-or-link-via-email-but-not/a8be4248-B803-41F6-9014-386301acb67e

  You can also view the article for more information:

  Import, export, or change the format for contacts

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-export-or-change-the-format-for-contacts

• I bought an older version of Photoshop Elements (4.0) - in product unused in sealed original packaging. Try to install on my MacBook Air but the part was through the installation, I get this error message: "failed to install. The installer with

  I bought an older version of Photoshop Elements (4.0) - in product unused in sealed original packaging. Try to install on my MacBook Air but the part was through the installation, I get this error message: "failed to install. Setup has encountered an error that caused the installation to fail. Contact the manufacturer of the software. »

  then it is probably too old and incompatible.

• PDF on the Web site

  I created a PDF (8 pages) and I want to download on my site for people to interact with.  They can return from one page to another. Something similar to what is presented on the link below. I want to keep them on the Web site and have an optional download link.

  www.Issuu.com

  Thank you.

  How a PDF file is displayed in the Viewer is the Viewer settings. When they come to your page and you open a PDF file, it can do one of several things: create open in the browser, open in Acrobat, download as pdf, etc. These options depend on the user and parameters independent of what we, as web designers, can control.

  You can watch in "Page turn effect PDF" to achieve a similar effect in a page, but in all honesty, they are more annoying to viewers than useful, especially on mobile devices with limited data plans.

  Create a link to the PDF as if it were just another page in the site, this is what you really need to do to make it available to your viewers. If they click on it, it will appear on their device in any way that they put him in place to appear.

• Text published on the Web site using edge animate appears dirty

  I decided to design an entire website using Adobe Edge animate that I know very little coding and I need the Web site are very interactive. However, the text that I publish on the website seems dirty and not clear/no crispy visually. Could you please help me solve this problem?  Here's a screenshot for your reference:

  

  The original and the screenshot is actually quite similar. I think the problem was that the text was be stretched to fill the page in the browser. Its now fixed.
  Thanks for your comments.

• iamge of icon for the web site

  I see that a website has an icon to present the web site.

  ASP.Net has favicon to present the web site.

  I would like to know is - this ColdFsuion has a similar function to have my web site, an icon to present.

  Your information and your help is much appreciated,

  Kind regards

  Iccsi,

  Favicons really have nothing to do with the language server, you choose to use side (ColdFusion, ASP.Net, PHP, etc.).  These are rather features basic HTML must be supported by the browser.  All you have to have a favicon to your website is to add this to theTag:

  There are online tools to convert PNG/GIF/JPG files into ICO files, like this: http://favicon-generator.org/.

  HTH,

  -Carl V.

• I didn't care that "connection is not sure" I want to go on the Web site

  Firefox won't let me go to a website because "the connection is not safe." I don't like that it's not safe, I need to download something there and Firefox, IE, and Opera is the only supported browsers. I tried IE and won't go out of my way to download Opera. The link is blocked from my view as you can see in the picture. I don't know why this is happening, but it pisses me off no end. If you could help, that would be just super.

  There are security software such as Avast and Kaspersky and BitDefender and ESET which intercepts secure connections and sends its own certificate.

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the "Add Security Exception" this URL chrome by pasting into the address bar of Firefox and check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field of location of this window, type or paste the URL of the Web site.

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  You can check details such as the issuer and the certificate chain in the Details tab of the certificate display.
  Check which is the issuer of the certificate.
  If necessary, you can attach a screenshot that shows the display of the certificate.

• Connections to the Web site

  Since the update of Firefox for windows 10 I cant get onto certain websites.
  All I get is the error message. Tried removing Firefox firewall and adding back on. Don't agree.
  Never had any problem until I updated. I have triewd the removal of Firefox and download again. Still not good.
  Disabled extensions and Add ons still no joy.
  Anyone know why this is happening. Could be something simple, but I just don't find that.

  The secure connection failed

  An error occurred during a connection to www.qrz.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the web site owners to inform them of this problem.
  

  Hi, in case, you're an avast user, please try to disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• I get the message: firefox does not when I try to browse the web sites

  For some time now, when I load a web site, it takes a long time to load and then I get the message: firefox does not, or long-running script and does not. This occurs on many web sites, and when that happens, it takes a long time to browse this web site. I also have this problem on other browsers. Any suggestions as to what might help? Thank you.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     , choose historic, then "Claire recent history...". ».

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click on the "Clear now" button

  More information can be found in the article remove the navigation, search and download history on Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Cannot update or load the Web site.

  Hi, my name of Chris and I bought a MacBook Air off of eBay about 2 years ago and I decided to use it and I noticed that I was on the version of Mac OS X 10.6.8 and he decided to search for software updates. As soon as I tried to check, he would fail and a pop up appears saying "Update software cannot verify updates due to a network problem". I am absolutely convinced that my internet connection completely works because I just got about 1 week ago. I am sorry to ask a lot, but another problem I have is that whenever I go online, some site not loading and under him, it appears "ERR_EMPTY_RESPONSE". On the Web site like YouTube and Apple Discussion of work. It would help if someone could help me solve these 2 problems.

  You have access to another network where you can see if you still have the same problems? This will help determine if there is a problem with the network or computer.

  Did you reboot / reset the router?

  Connection to the problems of the App Store

  Connection to the problems of the App Store (2)

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode

• I downloaded the update to FF twice, but the web sites are not displayed despite my being on the page. Also restarted.

  Web pages (I tried different web sites) are not displayed, but the line at the bottom of the screen indicates that I am indeed on the web site. Previously, before, I downloaded the version nerw of FF, display web pages seemed slow unless I'm assured by cursor was "large" of the space on the screen that displays the web page.

  I checked with another browser and websites I went to work and are displayed in the browser.