Is the locale-specific number conversion chain?

Similar Questions

• The locale-specific decimal separator in Fmt?

  Is there a way to get the floating point numbers using the locale-specific decimal separator in the Fmt() function?

  It seems that SetSystemAttribute will only change the separator of UI elements, as described in this thread.  Call setlocale (LC_ALL, "") doesn't seem to work either.

  Is this possible?

  Thanks for the reply.  I ended up just do a search / replace and permutation of every instance of Fmt() with sprintf_s(), which DOES pay attention to the setlocale() function.

• Groups and permissions of the user is added to the local disk post-conversion?

  We currently have a security policy with our Windows servers requiring admins to remove unnecessary security groups and users on the local disks. Basically, the SYSTEM and administrators retain full control, but all other users and groups are deleted for security reasons. We find that during a P2V conversion/clone servers, security groups and users are added to the readers of these new virtual machines (see screenshots below):

  Security before and after conversion. Could this be a function of the sysprep post-conversion tasks that work?

  Until now, we thought that, apart from the usual physical changes inherent to a clone, security remains unchanged. We follow best practices for conversion of these machines (running this as a local administrator account, run this converter installed on the machine, by stopping services as much as possible and so on).

  You can compare it to a system where you don't resize volumes, but all other factors are the same?

  If you reduce the size of a hard disk volume during the conversion, it will make a copy of file by file from the source to the destination devices.  We may have to add permissions for the conversion process, but I don't know if it is real.

  If you maintain or increase the size of the hard drive, it is a clone of block level which should be a bit-by-bit copy the source system.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Basic question on the string-to-number conversion

  Hello
  
  I have a string, for example '23,2445,45'
  I want to extract the numbers of this string and put it in an array of numbers.
  
  Any keyword SQL is available. What is the best way to do it.
  
  Thank you
  MD

  Try this

  declare
  
  type vnum is varray(20)  of number;
  
  vnum1 vnum :=vnum();
  
  j number;
  
  begin
  
  j:= 1;
     for i in (
     with t as (
     select '23,2445,45' product_string from dual
     )
     SELECT   *
         FROM (SELECT
                      RTRIM(LTRIM(SUBSTR(product_string,
                                         INSTR(',' || product_string||',', ',', 1, n),
                                           INSTR(',' || product_string||',', ',', 1, n + 1)
                                         - INSTR(',' || product_string||',', ',', 1, n))),
                            ' ,') AS prod
                 FROM t,
                      (SELECT     ROWNUM n
                             FROM DUAL
                       CONNECT BY LEVEL < 10))
       WHERE prod IS NOT NULL)
       loop
  
       vnum1.extend;
       vnum1(j):= to_number(i.prod);
  
       dbms_output.put_line(vnum1(j));
  
       j:=j+1;
  
       end loop;
  
       end;
    
  

  vnum1 vnum: = vnum (0,0,0,0,0,0,0,0,0);

  I did it because I don't know how to initialize the array. Need to read more about it.

  This will put the values in the vnum1 table.

  If you need to do something with the numbers in the string

  so you can do the following without using a table.

  declare
  begin
     for i in (
     with t as (
     select '23,2445,45' product_string from dual
     )
     SELECT   *
         FROM (SELECT
                      RTRIM(LTRIM(SUBSTR(product_string,
                                         INSTR(',' || product_string||',', ',', 1, n),
                                           INSTR(',' || product_string||',', ',', 1, n + 1)
                                         - INSTR(',' || product_string||',', ',', 1, n))),
                            ' ,') AS prod
                 FROM t,
                      (SELECT     ROWNUM n
                             FROM DUAL
                       CONNECT BY LEVEL < 10))
       WHERE prod IS NOT NULL)
       loop
  
  -----Do what ever you want with the number.
  
       dbms_output.put_line(i.prod);
  
       end loop;
       end;
    
  

  Published by: alvinder on March 11, 2009 15:18

  Discovered how to initialize the array.

• number conversion chain

  
  
  

• String to number conversion problem

  I have a VI that pulls in data from a device using VISA, and I got it on another computer to work a few weeks back. I had to transfer the VI to a laptop computer to run a few tests, and now I can't make it work. I am unable to put my VI because the laptop on it's is unable to access the network companies, I will do my best to explain it all, I apologize for the inconvenience! My problem is not however with VISA, it's with an exit VISA number conversion chain.

  I have attached a painting drawing of VI to better explain it.

  I use the block series Visa football match in baud rate and all that many good things to the unit and port settings set of device management. Then, a while loop is entered. The loop will run until you press the stop"" button. The next block of visa is the writing block, he asks for a reading of the device. The next block of visa is the first block of reading, he returns playback in the form of "NA-XXX. X' where x are numbers. The next block of visa is the second reading block, this block just echoes back the command sent to the device. Playback of the first visa read block, "NA-XXX. X' is going exponential/fractional chain to digital converter.

  When you perform a run/debug to highlight run, the release of visa reports the correct value, is the value of the device reading - however the string to number converter generates a 0,000, no matter what channel number is. I am at a loss as to what may be wrong because it's the EXACT set up I had to work very well a few weeks ago!

  I'm using Labview 10 on the laptop, the old computer was labview 7. I'm guessing that this is perhaps the rub... I Redid the VI from scratch, although I have not opened the old VI in labview 10.

  Any help would be appreciated. Again, sorry I am unable to attach the VI.

  DARB wrote:

  I have attached a painting drawing of VI to better explain it.

  Would it not have been easier to just post a screenshot? You might also have used the Tool of Capture of Code. (Which reminds me that I need to install it to my previous versions of LabVIEW, as evidenced by the screenshot I took. )

  As to the question: you probably either:

  • employee analysis of chain initially and when you rewrote the VI you used the regular string conversion functions.
  • Wired an offset value in the string to the number function.

  

• Varchar2 to the number conversion problem

  I have some difficulty conversion strings to numbers. On my Oracle 9.2 server, it gives me an error ORA-1722:
  SELECT TO_NUMBER ('1.2') OF DOUBLE
  Apparently, this is because my server is configured to use the Greek number format (comma instead of decimal point) and substitute "1.2' above with '1.2' will work correctly."
  Is it possible for me to convert strings with decimal number type, independent of the culture so that my application will not have to depends on the locale setting of the server?
  
  Thank you.

  Hello

  Welcome to the forum!

  If you don't want to change the NLS settings for your session, you can specify what settings to use for a particular call to TO_NUMBER (and other features), like this:

  ALTER SESSION     SET NLS_TERRITORY = GREECE;
  
  SELECT     TO_NUMBER ('1.2')     AS wont_work
  FROM     dual;
  
  SELECT     TO_NUMBER ( '1.2'
              , '999999999.999999'
              , 'NLS_NUMERIC_CHARACTERS = '',.'''
              )          AS n
  FROM     dual;
  

  The output below shows the TO_NUMBER 1-argument fails, but the 3-argument TO_NUMBER works:

  Session altered.
  
  SELECT  TO_NUMBER ('1.2')       AS wont_work
                     *
  ERROR at line 1:
  ORA-01722: invalid number
  
           N
  ----------
         1,2
  

  The actual format of the string (the first argument) should not match precisely the format mask (the second argument). You can include signs, or omit the decimal points, so '3', ' '-1,2. '-3', ' + 1.2 ' and ' + 3' will be all converted correctly.»»» "

• Error: The application-specific permission settings grant Local Activation permission for the COM server application in the Windows XP computer.

  Original title: DCOM {E9F9ED00-7705-101B-9802-0000C07B665C}.

  I have this message DCOM in the registry: "the application-specific permission settings do not grant Local Activation permission for the COM with CLSID {E9F9ED00-7705-101B-9802-0000C07B665C} server application the user... xxxx...". (I deliberately placed the "xxxx" instead of my current PC for security reasons). This security permission can be modified using the Component Services administrative tool." I tried to look through the forum here, and I found elements that were close and others are not. so if anyone knows where I can go make the adjustments, it could save our society approximately $10K, because my new bosses are ready to install all new hardware and software, but if we could find a much simpler approach to this problem, this would make the new kid on the block like a champ look.
  We have a Window XP, the flat touch screen PC, running a few packages of software reviews that keep a record of our SCADA system trend.

  At random times around the clock, the PC will just restart and return to the logon screen. There is no other necessary users, so we have only the journal administrator form. As soon as we open the administrator it is specially configured to run a specific program of our choice, but if the PC keeps restarting whenever it feels like it, there is no history chart tend to save. It is essential, that we need.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• I have an error that says"the application-specific permission settings do not permit grant local activation for the application of the COM CLSID/w Server (BA 126ADI-2166-11 D 1-B1D0-0008 (OSFC1270))

  The error indicates that the application-specific permission settings do not grant approval to local activation for the application server COM with the CLSID (BA 126ADI-2166-11 D 1 - BLM - OO8 OSFC127OE) to the user NT Autoritative / network service SID (S-1-5-20).  The error message says it can be changed by using the component services administration tool.  I can't say what to do when I get to the admin tools.  Can you help me..

  Hi mildrednorcross,

  1. when exactly you receive this error message?

  2. is your computer connected to the server or the domain?

  If your computer is on a domain network, your question will be better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• The Date conversion chain.

  Hello

  I used following code to convert string to date but apply the time zone of the device during the conversion. I don't need this but I
  Here same time of this string.
  as
  String = '07:59:17.427 2009-07-31'
  Date = 2009-07-31 07:59:17.427

  Date formatter = new Date (HttpDateParser.parse ("07:59:17.427" 2009-07-31));
  SimpleDateFormat dateFormat = new SimpleDateFormat ("yyyy-MM-DD hh: mm:." "") "'SSS');
  String strCustomDateTime = dateFormat.format (formatter);

  SimpleDateFormat format according to the local time zone. DateFormat does not work. see the documentation for the API

• Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

  Anyone has an idea why I get this error?
  Walt

  Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

  Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

  From another forum, although it applies to a different application, same principle:

  1. open Regedit.
  2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
  Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
  3. right-click on it and select authorization.
  4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
  5. apply a full control.
  6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
  Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
  7 right-click on it and select authorization.
  8. click on Advance and change the owner to administrators.
  9. click on the box that will appear below the line owner.
  10. click on apply and grant full control to the administrators.
  11. close all tabs and navigate to the administration tool.
  12. open component services.
  13. click on the computer, click my computer, and then click DCOM.
  14 find the corresponding service that appears on the display of the error.
  15. right-click on it, and then click Properties.
  16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
  17. check enable local.

  Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

  CLSID:
  
  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

• What is the maximum value of the specification number?

  Hello

  What is the maximum value of the specification number? When I put the number "UPDATE SpecNumManager SET StartingBlockNumber = 99999999"

  I create a few specs, I encounter error showing below when I try to save them. is this a bug? my version is v6111, thanks

  Thank you

  Terry

  Sql command execution error ' insert into specSummary (pkid, ActiveSigDocGroupSequence, AmberSLA, CreatedDate, EffectiveDate, fkAffiliate, fkCountry, fkGlobalSuccessionSpec, fkOriginatingTemplate, fkPermissionTemplate, fkProcessTemplate, fkSpecBusinessUnit, fkTaxonomyNode, SpecStatusID, GlobalSuccessionState, InactiveDate, IsHidden, IssueNum, IsTemplate, langCreatedIn, LastEdit, OriginatorID, OriginatorNameHistorical, OrigLangID, RedSLA, securityAccessLevel, SpecID, SpecNum, SpecNumber, SpecType, replaces, theOriginator, WorkflowStartDate) values (' 20205484dea2 - 2 ca 6-41eb-9806 - cce52513e7d4 ', '0', '0', August 19, 2013 10:01:27 ', August 19, 2013 10:01:27 ', NULL, NULL, NULL, NULL, '6000d0acb239-b9c6 - 478-a - 8 c 99-4ec741d2a1a5', "57566dc3c46b-b2fe-4276-ae7f-f7f1c28a913f") , NULL, "2141e3469193 - 4A 05-4953-9ef4-8bc08c1b1fb8 ', '2090111 c 6416-6de4-4707-b498-48a18671ca27', '-1234567890', 12/31/9999 00:00:00 ', ' 0', N '001', '0', '0', August 19, 2013 10:01:45 ', ' 0', not admin, Prodika ', ' 0', '0', '0', '2147d635d721 - 2ca 2-411 c-beed-d1584f7498ff', N '100000002', ' 100000002-001 ', ' 2147', NULL, ' 20533b94710f-5396-4487-bdd5-08d21365eefa»(, 19 août 2013 10:01:45 ') '.

  Specification numbers are 7 digits long. I believe that by default, the starting number is 5000000.

• PL/SQL: digital or value error: character number conversion in the TRG error

  Hello
  I have a strange problem with a trigger that, during the update of the table of reports (DB is 9.2.0.8):

  ORA-06502: PL/SQL: numeric or value error: character to number conversion error
  ORA-06512: at "UDR_LOG", line 345
  ORA-04088: error during execution of trigger 'UDR_LOG'

  but the 345 line is:
  END IF;
  
  This kind of strange

  the code looks like
  
  343 IF nvl(to_char(:old.PKD_ID),'''') <> nvl(to_char(:new.PKD_ID),'''') THEN
  344     v_zmn := v_zmn || 'PKD_ID''' || to_char(:old.PKD_ID) || '''' || to_char(:new.PKD_ID) || '''';
  345    END IF;
  
  so its concatenation not to_number usage .

  error is raised by the update on a column.
  
  I'm sorry that I can't provide you with the code in the trigger everything.
  So, if you could recommend only whole method of inquiry that would be great.
  Concerning
  Greg

  Hi, Greg.

  When there is an error in a trigger, the line numbers in error messages are compared to the first statement DECLARE or BEGIN; often, it is a few lines after CREATE OR REPLACE TRIGGER. Post a few lines after what you have already posted.

  If you do not find the error, then create another table to test this and create a small trigger on that table, who did just enough to cause the error. Then, you will be able to post the complete relaxation, and the code needed to recreate the problem.

• Windows could not start the windows on the Local computer firewall

  Original title: I don't have the first response says.then the following error code came.
  Windows could not start the ICF on local Computer.For more information, review the system event Log.If this is a service not microsoft, the supplier of service relationship and refer to the specific service 5 error code

  Hello

  Thanks for posting the request in the Microsoft community forums.
  The problem description, I understand that you receive the error "Windows has no start the firewall windows on the Local computer. To resolve this problem, please answer the questions.

  1. what anti-virus software is installed on the computer?
  2. do you have a third party security/firewall on the computer?

  If Yes, then you may not be able to start Windows Firewall, since you have a 3rd group of firewall installed.

  Even if you can re-enable the Windows Firewall, you can not run two firewalls at the same time.

  Try the troubleshooting suggestions provided to start the Windows Firewall.

  Method 1:

  Run the fix it from the link to the problems of the Windows Firewall Service and check.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2:
  You can check the service for the Service of Windows Firewall if it is started or not.

  a. Click Start.

  b. in the start search box, type Services.

  c. click right on - run as admin.

  Check if the below mentioned services has mentioned State and type start.

  Firewall Windows started Automatic\Manual.

  base filtering engine Automatic\Manual has begun.

  driver authorization Windows Firewall started Automatic\Manual.

  Also check the dependency services that are required for the execution of the Service Windows Firewall.

  Method 3:
  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 4:
  If the problem persists then, try the steps from the link.
  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope the information is useful. If you need help with the Windows Firewall, feel free to post you question in the forum. We will be happy to help you.

• Opening folder stored on the local file (working on the intranet) Server

  Hi, after several hours of searching online and every solution possible workaround I could think, I ask the community.

  I am trying to replace the word by muse to work to rebuild our wiki or intranet maintenance. The problem I have is that when I try to create a hyperlink to a file stored on a network file server, muse will always change my way to weird code... If I change the code in dreamweaver, it works. Problem is everyone must be able to change the "site" so that dreamweaver is not an option. I tried to insert html code but it messes with my layout and I am the only mechanic with some COMPUTER skills so we can not go this route. I need to make a link to lets say "Y:\procedures". Muse will change either to http://Y:\procedures or C:\Users\madjoe\AppData\Roaming\Microsoft\Windows\Network Shortcuts\Y:%5Cprocedures. I really don't understand how microsoft word can he do it perfectly but muse adobe can not...

  I that this is impossible, we usually pay for muse and try to get something else.

  I you thank all in advance and I hope that you will be able to help me.

  I don't really get how microsoft word can do it without fault but muse adobe can not...

  It is a matter of point of view, I'm afraid. As far as Muse is concerned, it awaits your URL for proper server paths, not the local filepaths and given that, solve the network path mapped to its native folder URI and characters for the hex code conversion is actually what to expect. You don't have that here on misunderstanding how actually the Word does not have things just in specifications and relies on many specific Windows Automation. So whatr, where appropriate, all right, you have just expectations wrong. Regarding your real issues, you can at least do precede your URL with the file:// Protocol Manager and use the correct URI notation with oblique, but at a fairly general level that you will always have problems with your overall approach. You should really consider the activation of a local web server and configure it to manage all the paths of files while serving as a go-to-global map for all employees. Your pages are going down, anyway. Instanxce what for if a resource is not actually mapped to a drive Y: on one of your computers? The overall approach is prone to errors 1 million, as, I must say once again, you are effectively closing a lot of security of Word Automation. And to compeltely ruin your day with more bad news: change your development environment won't solve all of these questions. You may be able to fix some URL, but the other stuff is probably still not going to work as she would be relying on the DOM of Word template and other things.

  Mylenium