Is the responsibility of the private sector in this context error

Similar Questions

• change public network to the private sector

  I'm working on a laptop HP Envy Touchsmart.  Model number is 15-j057cl.  He had a serious hard disk crash, and I am trying to recharge using the USB stick recovery at HP, because there is no CD/DVD drive.  Windows 8.

  All the drivers are loaded.  I have an internet connection via a wireless network, but not through the wired one.  All of the other PCs in my office are working very well, wired and wireless.  The cable network presents itself as an unidentified network and is a public network.  I've hunted in Microsoft and HP to find out how plugged it, identified and classified as a private network.  I have the link on the laptop and the network switch lights.   I changed the Cat5e cable with a good I use on another PC and still have the issue.

  The wired NIC Realtek PCIe GBE does not have DNS information, as it is constantly with the default Microsoft IP of 169.254.64.151.

  Any help would be appreciated.  Wireless connectivity is fine when you are mobile, but in the environment of office stationery, I need the wired connection speed.

  Hi RalphJones,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see you have some connectivity issues with your Ethernet connection. As a private network to do what you need to do is set a password on the network. You need to talk to your the one that supplied to your wireless router.

  We will try a few things. First let's make sure that you do not use a Proxy Server. To do this, follow the steps below.

  Step 1: Open your Internet Explorer to your desktop computer from the Apps page

  Step 2. Click Tools and then click Internet options
  Step 3. Click the Connections tab, and then click LAN settings
  Step 4. Select the use a proxy server for your LAN check box
  Step 5. In the address box, type the address of the proxy server
  Step 6. Check "automatically detect connection settings.
  Step 7. When you have finished your changes

  Step 8. Click OK and then click OK again

  Then press the Windows key and 'R' to open the command run and then type cmd and press ENTER. This will bring up your command prompt and type ipconfig and press ENTER. Enter the default gateway, because it's your router. Then use the Ping section and this document howtogeek.com DNS server problems to see if you can reach the Web page of the router.

  If you can not reach the router then we will examine reseting the TCP/IP stack. Go to your command prompt and type netsh winsock reset catalog, and then press ENTER. Then type netsh int ip reset reset.log and press ENTER. Then, restart your computer. This will reinstall the protocols internet on your computer in case it has been altered.

  Thank you

• How to use the referential cursor in this context

  Hello everyone I want to create a procedure and I am able to create it, but it does not work as I want it to be
  Please suggest the best way.

  CREATE OR REPLACE PROCEDURE UPDATE_COMMAND(V_TABLE_NAME VARCHAR2, V_COLUMN_NAME VARCHAR2)
  AS
  
  V_SQL CLOB;
  V_SQL_1 CLOB;
  TYPE V_SQL_2 IS REF CURSOR;
  V_SQL_22 V_SQL_2;
  V_SQL_23 VARCHAR2(2000);
  A clob;
  
  BEGIN
  
  V_SQL :='UPDATE '||V_TABLE_NAME ||'SET '||V_COLUMN_NAME ||' = ';
  
  V_SQL_23 := 'SELECT'|| V_COLUMN_NAME|| ' FROM ' ||V_TABLE_NAME;
  
  OPEN V_SQL_22 FOR V_SQL_23;
  
  loop
     FETCH V_SQL_22 INTO A;
   
    V_SQL_1 :=V_SQL | |V_COLUMN_NAME;
  
     dbms_output.put_line(v_sql_1);
     END LOOP;
     
     CLOSE V_SQL_22;
     
     END;

  first of all I don't know how to refer to this v_coluimn_name which I use just after the fetch command.
  
  When I run the procedure it gives error
  
  ORA-06550: line 1, column 22:
  PLS-00357: Table, view or reference sequence "QM_PRODUCT" not allowed in this context
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored

  Prost wrote:
  I want the update command to be stored in a clob variable so that I can insert this variable in a column of a fictitious table, and then I'll get update of this table scripts manually.

  Well, what I gave just you out individual lines, so just adapt it to concatenate these lines in a CLOB variable for the loop process and then store you CLOB when finished. You should be able to handle that yourself.

  Still don't know why you want to do it right. Looks like a bad way to do something.

• How can I do a folio which is part of the private sector for my client and their staff (about 20 people)?

  Hi, I have a subscription to creative cloud and have created a folio ipad DPS for my client. They want to distribute this folio to their employees (about 20 people) and it is not public prefers.

  I can do this with my CC subscription or do I need a business account?

  For 20 people? Use the Adobe Content Viewer.

• Suddenly I can no longer type in the Safari search field, except in a window of the private observer. This happens on all my machines and iPad and iPhone Safari application plant. That's happened?

  Cannot type in the search field in Safari.

  Turn off the Suggestions of Safari in the preferences/Safari/search / uncheck Safari Suggestions.

  Latest issue of the Safari search bar

  http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

• H4 element not allowed as child of the ul element in this context - better fix

  This page looks and works like I want to, but clearly, I broke the standards, so what is the best way to change to achieve the same thing?

  Case studies of promotional Marketing and service APTCOWEB Articles - news

  It seems it should be easy to penetrate the long ul of many courts, with headers between. But the way in which the styles are defined, I create new problems.

  Personally I would break the lists into manageable as pieces below:

  2015

  • November 2015
  • October 2015
  • September 2015
  • August 2015
  • July 2015
  • June 2015
  • May 2015
  • April 2015
  • March 2015
  • February 2015
  • January 2015

  2014

  • December 2014
  • November 2014
  • October 2014
  • September 2014
  • August 2014
  • July 2014
  • June 2014
  • May 2014
  • April 2014
  • March 2014
  • February 2014
  • January 2014

  2013

  • December 2013
  • November 2013
  • October 2013
  • September 2013
  • August 2013
  • July 2013
  • June 2013
  • May 2013
  • April 2013
  • March 2013
  • February 2013
  • January 2013

  Then use the underside of css to style the h4:

  #main h4 {}

  color: #f6c238;

  background: #0d2b88;

  text-align: center;

  }

• Use of the static keyword in this context?

  Hi all
  
  I have an application that has a class I want that all the other classes to access them. I'm not sure is how implement it correctly or it even happen. For example, consider the following:
  
  Main class

  public class Main {
  
      public static void main(String[] args) {
          new Main();
      }
  
      static SecondClass secondClass = new SecondClass();
  
      public Main() {
          
      }
  
  }

  Second class

  public class SecondClass {
  
      public void method() {
          System.out.println("Method in Second Class");
      }
  }

  Third class

  public class ThirdClass {
  
      public void doSomething() {
          //is this appropriate?
          Main.secondClass.method();
      }
  }

  Now I know that I could just pass an instance of the second class to all classes that need to use the second class, but I thought it would be easier to declare the second static class instance so that I could do the following to access easily given that I only ever need one instance of the class :
  

  Main.secondClass.method();

  So my question is, this approach would be appropriate or it is badly perceived to access a class in this way?
  Thank you. :)

  I know that my problem would be solved if all of these classes were in a class

  No, your project is too important so a class... it has too many different types of objects.

  Neptune, I see that your project suffers from the poor class design. It seems obvious to me that you DON'T know what must do your application, you know what it should look like, you know that you listen to the clicks of a mouse, you know you need thumbnails etc etc. But none of this will work if the data is not organized properly - and that will not happen if you do not know how each each object fits.

  You develop this project to the rear. Start with data. It is. What are the data? How should be organized? What data should go to what class? etc. In addition, you must name your classes with intuitive names.

  Since your project is essentially a Photo Viewer, I sggest you name your main class just that...

  public class PhotoPreviewer
  {
    Album[] albums;
  }
  

  ... Notice the preview generator will now be able to access an array of objects from the Album. Now for the class from the Album...

  public class Album
  {
    String albumName;
    Photo albumPhoto;
    Photo[] photos;
  }
  

  ... see how each album has now a name and a single object of Photo to represent it in the previewer? It also contains an array of Photo objects, which we will see now.

  public class Photo
  {
    URL url;
    BufferedImage image;
    BufferedImage thumbnail;
  }
  

  See how each picture maintains the URL, an image, and it's own miniature?

  Now you can see what the data is and how the photos and Ablums of fit together to make the whole of the PhotoPreviewer project.

  But with all these classes separated I'm not sure how to communicate properly.

  Just add the combination of methods of accessor (GETTER and SETTER) as well as the methods of transmission as I described above.

  Neptune, you see that you need start your projects based on the data it processes? Do not start a project of the graphic aspect and Auditors, managers and the buttons of the things... Start your projects with the data, and how these data fit. Once you get the data goes, THEN add graphics, pretty icons and a graphical interface.

• Configuring the private network or disable questions for the network discovery in network and sharing Center.

  I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  This article was written for the two Windows Vista & Windows 7.  Drop-down menu (right) allows you to activate Windows Vista Instructions.

  http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7

• Lightroom will not change to the private collection

  I have a collection that I made public and then tried to change to the private sector.  When I click on the "Make private" button, I get a message that the collection is now private.  However, the link remains and the button still says 'make private '.  Whereas it should change to 'Go Public' and the link should disappear.  When I click on the link, the browser opens and gives a 404 error code.  How can I fix it?

  Open the creative cloud desktop application and update that.

• Read the last sector of the virtual hard disk

  Hello

  I'm running Windows 7 Home Premium VM inside VMWare Workstation image. I want to access the last sector of this Virtual Hard Drive. However, I do not within Windows 7 itself.

  Instead, I want to start this virtual system using a bootable Livecd. To this end, I can create an ISO using the Windows XP Installation CD and Bart PE Builder.

  Now my question is, how do I boot under VmWare Workstation Livecd Bootable using Bart PE created so that I can access the virtual hard disk.

  And also, once I started the new system, I want to read this last sector of the virtual hard disk. This is for testing purposes. I know, it could be done on a running system as well however, I want to be able to do this in VmWare Workstation.

  I searched the net for a solution. I came across the Disk Explorer utility, which is available here:

  www.Runtime.org/DiskExplorer.htm

  In my view, this will allow me to read the last sector and thus copy. It is however an expensive software. They have even a plugin developed to work with BartPE, which is available online here:

  http://www.Runtime.org/diskexplorer_for_ntfs.cab

  But we need to provide the license key in the .inf for this file to work.

  In any case, I know how to prepare the Windows Bootable Live CD using BartPE.

  Issues related to the:

  How to get started in using a windows live CD VMWare?

  How to access the virtual hard disk of the Windows 7 operating system?

  And finally, are there other alternatives that are easier to explore this disk that would allow me to read the last sector of this virtual hard disk and copy another medium?

  Thank you.

  I am able to use the keyboard in knoppix, but the mouse doesn't seem to work properly. I am able to click right on the desktop but not able to select any option. The behavior of the mice is completely wrong.

  Is it possible to fix it?

  You can try to temporarily adjust the Type of guest OS Linux or edit the .vmx to have these parameters/values or temporarily remove the USB controller.

  usb:0.deviceType = "mouse"
  usb:0.present = "FALSE"
  mouse.vusb.enable = "FALSE"
  

• Departure from virtual IPs on the private interface?

  In the book, Oracle Database 11g
  High availability of version 2
  http://www.Amazon.com/Oracle-database-release-high-availability/DP/0071752080/ref=sr_1_1?ie=UTF8 & qid = 1369406044 & SR = 8-1
  
  It is said:
  "Virtual IPs starts on private interfaces so that they can be moved to other interfaces on failure."
  
  A reason why they are started on the private interfaces and not to the public? Also, after their startup continues to receive their traffic through the private interface? Or are they moved to the public interface just after their start?
  
  I can't find much information on this claim of anywhere outside this book.
  
  Thank you
  Mike

  Do not have the book, so will take your Word for it that's what the book says.

  Most likely a typing mistake. The VIP is configured on the public address.

  The VIP is never set on private and then moved to the public sector... They are configured on the public and started on the public interface.

  http://docs.Oracle.com/CD/B28359_01/RAC.111/b28254/admcon.htm#autoId4

• Missing the "private browsing" button on the tab page there is no button "incognito" to the left of the button «+» iPhone 5, iOS 8.4, Firefox 1.2 (1206).

  Hello
  I have this problem since Firefox 1.1 for iOS. I've updated to version 1.2 (1206) but the problem persists.
  When I press the button "tabs count" on the upper right corner, the tabs preview screen with '+' button on the top right corner but THERE IS NOT button "incognito" on his left (it is only black box empty, do you need a screenshot?). Is this a bug or private browsing is not available yet for iOS?
  If the private browsing feature is implemented, how can I activate it?
  Thanks in advance!
  I hope that Firefox will become my favorite browser on iOS too! Keep up the good work!

  EDIT: misspelling.

  Hi spas123, thanks for your kind comments - as far as I know, the private in firefox navigation feature works only on devices with ios9...

• The mask purple of the private browsing mode, where is it?

  Hello!
  I installed Firefox 42.0 on my PC running Windows 7 SP1 32 bit and it is stable. But the purple mask, the novelty of the private browsing mode, does not work in the following scenarios. I don't see the purple mask on top of windows.

  1 right-click on the "Mozilla Firefox" shortcut, and then select Properties. Add ""-private "at the end of the area target;" \Program Files\Mozilla Firefox\firefox.exe"- private.

  2 tools > Options > privacy > history, click on the box "always use the private browsing mode.

  Do you have any advice?

  Best regards
  BluePencil

  You will see the purple mask if Firefox is in normal mode and you open a new private window.
  If you are in permanent private browsing mode, so there is no need to display the icon and it is deleted.

  You can use an extension for private browsing mode support tab.

  • Private tab: https://addons.mozilla.org/firefox/addon/private-tab/
  • Private browsing mode tabs get a dotted underline
  • You can enable or disable private browsing mode / disable via the context menu of a tab

• Why my home page is reloaded when I select the private tab?

  I opened Firefox menu to the right of the toolbar. Click on 'new private window' and it opens / reload my home page. I can br to a Web page, select 'new window private' & I get my home page. AND! There is no blue icon to indicate 'private window' help! Thank you!

  There is a feature to automatically start Firefox in private browsing mode. It is a stealth mode, where white-mask-on-purple-tab does not appear on the title bar next to reduce, restore/maximize and close to the buttons.

  To see if you have enabled, you can see the Options page, Privacy panel:

  "3-bar" menu button (or tools) > Options > privacy

  If the selection is set on "Firefox will: don't remember history" then automatic private browsing is enabled. To disable, change the selector on "conservation rules: use the custom settings for history" and then uncheck the box for always use the private browsing mode.

• "password incorrect provided to decrypt the private key"

  The keys that I generate on my Mac are unusable. Still, I get "incorrect password provided to decrypt the private key". In this case, whether or not I generate with a password.

  This is the process I use:

  ssh-keygen - t rsa-n mypassphrase f my_id

  Generate the key pair public/private rsa.

  Your identification has been saved in my_id.

  Your public key has been saved in my_id.pub.

  The fingerprint of the key is: etc etc

  Then to check:

  ssh-keygen - y f my_id.pub

  Enter the password: mypassphrase

  Loading key 'my_id.pub': incorrect password supplied to decrypt the private key

  Anyone have an idea what is wrong? Thank you.

  Turns out I had wrong instructions to the admin of the server I tried to connect to. He wanted me to use the .pub file when connecting via ssh. So what I tried to solve the problems. But that is never going to work, because the password is used to decrypt the private key, not the public key. So when I change my test to "ssh-keygen - y f my_id ' it works fine. Should have tried first. DOH.