Is the source Support 2 faces 476DW MFP HP LASERJET PRO 400 COLOR document

Similar Questions

• Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

  HP LaserJet Pro 400 color MFP-M475dn-CE863A

  Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

  When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

  I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

  I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

  (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

  Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

  Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

• M475 MFP HP LaserJet Pro 400

  I just put a laptop for windows 7 64 bit. After you have installed the software package for a M475 MFP HP LaserJet Pro 400 via USB it analyzes not the sheet feeder. The scans are empty. Any ideas as to the cause.

  Lemmy25,

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do so at http://h30499.www3.hp.com/hpeb/ .

  I hope this helps.

• turn off the broadcast without wire - HP laserjet pro 400 color mfp m475dw

  How do I disable broadcasting SSID for HP laserjet pro 400 color mfp m475dw.  I disabled the configuration via the web console wireless printer, but it is still broadcasting.  I also updated the firmware to 20131028 last available.

  Since it is wiered one of the scenario, I could solve this with the help of the HP Support is by doing factory reset/NVRAM reset the unit by turning the printer and holding right arrow and cancel on the touch screen of the device (cancel is on the lower right of the touch screen on the black area and right arrow is just above him (one in the middle of the Panel) in the same black box) and the device of turning on until the message something like storage reset... is displayed and can release the two buttons/zone button.

• MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more

  My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.

  I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.

  Any thoughts on how to solve this problem?

  Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...

  I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry

  Now it does not work for everyone but I fixed it on my machine with the following

  now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type

  in my machine's plug

  Reference Dell d6420

  Win7

  Msoft word 2007

  printer itself is

  HP laserjet 200 color m276

  printer driver is

  HP LaserJet 200 color MFP M276 PCL 6

  I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you

  If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations

• LaserJet Pro 400 M401n: How to set the margins for binding up and left for LaserJet Pro 400 M401n

  I am connected to ePremis (medical site) that allows me to print the selected medical forms. ePremis uses the default printer to print the selected form.  The selected form should be printed on a preprinted form that I load into the tray of the printer.

  The problem is that ePremis does not provide an option to set gutter margins and print aligns correctly with my pre-printed form. The print position is a little weak and must also be shifted a little to the left. I need to reduce the high binding margin to move the position of superior print on the page and the left binding margin must also be reduced to move the print a little position to the left so that the printed data will properly align with my pre-printed form.

  Since ePremis does not offer an option to set the margins of the gutter, I need to be able to set the margins of the gutter through the printer driver, but there is also no option provided by the printer driver dialog box to set the margins of the gutter.  :-(

  Is it possible to set the printer LaserJet Pro 400 gutter margins?  I see the margins left and right options in the driver dialog box printer, but they are grayed out and cannot be changed.

  I have another printer, Kyocera laser printer, and I don't have this problem with the Kyocera because it offers the possibility to set gutter margins in the printer driver dialog.  I wonder why the LaserJet Pro 400 does not provide this option?

  I perhaps could solve this problem by sending PCL6 commands to the printer before printing?  I'm a programmer and am open to this option if it would work.

  Your help would be much appreciated.  Thanks in advance!

  Setting margins generally depends on demand - but (you say) that your application does not allow this.

  Some printers provide functionality of saving images , whereby the position of the image of the page onto a physical sheet can be adjusted to the printer, usually on a basis of by-tray.

  For example, with my Laserjet Pro MFP color 400 M475dn, the appropriate menu/menu item is described as follows:

  

  Note:

  • This setting applies to the bar up this that changed, so will have an impact on all the tasks using the specified status bar.
  • Not all printers support these features - I have no idea if your LaserJet M401 exercises or not.

  With regard to the '... sending the commands to the printer before printing... PCL6«» :

  • PCL6 (PCL XL) rather more autonomous than PCL5is, so I'm pretty sure that nothing you can "send" to the device to influence the outcome of the following printing.
  • Even with PCL5 print jobs, standard printer drivers are "overcome and-tail' with universal output language (UEL) escape sequences (which reset the device to the market environment (user - default)), which would be too mount sequences exhaust specific PCL5 previously sent to the device.

• I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

  When I scan or fax, we get:

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  The printer is a Pro 400 Color MFP LaserJet - m475dw

  Windows 7 Professional Service pack 1

  What should I do to fix this?

  Thanks for the help.  I actually did an update of the firmware and it solved the problem.

• MFP HP LaserJet Pro 400 M425dn cold reset

  Hello!

  Help me! How can I make cold reset HP LaserJet Pro 400 MFP M425dn ?

  You can do 'factory reset' menu of the control panel; or permanent initialization of power first, holding and cover the corner area to the right / left of the control panel when you feed on... release your finger when you see «initialization permanent...» ». After you complete and return the loan, it indicates the reset is complete.

• HP LaserJet Pro 200 Color MFP: HP LaserJet Pro 200 Color MFP M276n: low memory

  Hello

  my new M276n printer has memory problems. Printing over two pages are stopped with a notification of "memory". I searched this forum and found a 'temporary' solution (reset printer to default settings) and a stage of 3 mysteriously missing (deleted the message). This does not in the long run because after only 4 more printing, I have the same problem again. I don't print many, mainly Amazon returns labels and information. Reset or not, the information page shows 127MO 256 MB available memory. What is the other half serving?

  Issues related to the:

  1. is there a solution?

  2 can it help if I disable unnecessary features (fax)?

  3. can I disable fax? (If Yes: how?)

  4. is there a solution?

  Thank you!

  Restore the default settings is not usually serve the memory of a printer.  You need a cold reboot to complete this procedure.

  Cold Reset as follows:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-cold-reset/TD-p/5060955

  The video at the bottom of the first page is very useful.

• grinding noise when my HP LaserJet Pro 400 color MFP M475 calibrates

  When my color HP LaserJet Pro 400 MFP M475 recalibrates, I get a grinding or gear sliding noise.  No idea how to fix it or what to look for?

  Noise problems are difficult to troubleshoot remotely and they could easily mislead even when we are near the unit.

  Please confirm if the noise is a squeak or a noise squeky/hum.

  As you mentioned that this happens only during calibration, it is why I suggest you to double check & validate your toner cartridges.  Among the toner cartrdige is maybe defective and causing this problem.

  If not the toner cartridge, then it would be one of the components of hardware printer that is at issue, where a Tech HP may need to perform a physical inspection of the aircraft and the error condition.

• HP laserjet pro 200 color mfp: hp laserjet pro 200 color mfp scan show m276nw

  Hi I have a problem to use the scan software from my PC to scan the document and save it to my PC. Whenever an error message pop up: inaccessible Scanner.

  I use wireless and print without any problem, even I disable the firewall and connect with the printer cable, it still does not work. Please help me to solve the problem, I use the scan function a lot. Thanks in advance.

  Hi @RightOnMoney,

  Welcome to the Forums of HP Support!

  I see that you are having problems scanning with your HP LaserJet Pro 200 M276 MFP printer color. I'd be happy to help you with this.

  If you are able to print, but can't scan. It seems that the HP software is corrupted.

  Printing and scanning doctor may be able to correct the problem for us.

  • Please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.
  • What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If printing and scanning doctor does not resolve the problem, please uninstall and reinstall the HP software.

  • Monofunctional and multifunction printers - HP printer software uninstall.
  • Important! Please use the printer Install Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. Download and run The Installation Wizard for printer () a free tool from HP. When you click this link, HP printer installation wizard is downloaded using the download of your Internet browser capabilities.
   

• HP LaserJet Pro 400 color MFP M475 - driver Linux

  According to the product description page, this printer is supposed to have a Linux driver available, but I can't locate one.

  Nobody knows where and when you can be available for download?

  Thanks in advance.

  HP LaserJet 400 colorMFP M475dn NPIE7A8DA

  OS: Linux (any flavor)

  I think that this is the site you need to get the information you're looking for:

  HP Linux imaging and printing

  Supported printers

  MFP color HP LaserJet 400 m475dw

• LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

  When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

  Thank you!

  Replace the cyan toner cartridge.

• MFP HP Laserjet Pro 200 color M276nw

  How to scan up to 30 or 50 pages at a time, good quality yet NB a size compressed for assignments with this printer? I have HP LJ200 M276 Scan.  I also have the Readiris Pro 12 software provided with the product, but the quality and compression is not to be reckoned with Readiris. Surely I don't have to splash out for another scanner?

  Also, I don't seem to find the quantity of sheets you can load in the ADF (document feeder).

  Hi T3L,.

  You could try a Third Party Software.

  Depending on what you do with the file later, you can scan at high resolution and then compress the file zipping it. Similar to the use of Winzip software.

  Sorry, I hope this helps.

  Thank you.

• HP Laserjet pro 400 color MFP M475dn

  Hello

  I use my all in one printer including Telec.

  Fax works fine but what is possible when an incoming fax can print on tray 2?

  When a fax is coming, the fax is now taken paper from Tray 1.

  Thank you

  Mathieu

  OK... found out some information that should solve your problem:

  You will need to access your integrated webserver (EWS) > locate the IP address of the printer > what enter in a web browser > access the built-in Web server.

  Go to the System tab > installation paper > keep your the same default settings > change your settings from Tray 1 to the letter, any size. Keep the tray 2 settings > any size, any size. Save the settings.

  By substituting the default settings, this should change where your paper fires.

  Let me know how it works... good luck.