Is there a cable that goes from my hp psc 500 printer to a usb port on my computer.

Similar Questions

• Create a gradient to an object that goes from solid transparent

  Is there a way to create a gradient to an object that goes from solid transparent?

  Make sure that the cursor Opacity on the gradient tool Options toolbar is not set to a different number of 100%.

• Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

  I recently bought a HP Pavilion p6620f desktop PC to replace my HP Media Center PC m1270n desktop computer, which has stopped working.  I have a HP OfficeJet K60xi all in one printer fax scanner copier that has been the cable connected to the old PC.  The end of the cable does not match any of the places to go on the new PC.  Can you please tell me how to connect the printer to the new PC?   Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

  Please see: installation of the product with the USB cable and using the driver from Windows Update or the driver located in the Windows 7 operating system and HP USB 2.0 cable to the printer.

• Adjust the picture that goes from left to right

  I have a picture that goes from left to right, and when I saw it I see white on both sides.

  How can I solve this problem?

  Thank you

  Joe

  If the image is placed inside a box, be sure to mark the icon full width in the top menu.

  Make sure that scaling to fit is indicated in the section filling also.

  

• Is there a way to connect my DV camcorder to my usb port on the computer instead of a 1394 port, that my computer doesn't have?

  My Canon Elura 100 DV camcorder has a usb connection, but Windows will not recognize it when it is plugged into the usb port on my computer.  (The manual Elura says to connect it to a 1394 port)

  Hello

  According to my research, you must use the supplied canon DV cable and use it. Many users is connected it correctly with the usb port. I recommend you contact Canon support on that.

  http://www.Canon.com/support/

  I hope this helps.

• Can I connect printer to the usb port on the cable Modem CM100

  Hello

  This may seem like a stupid question, but here goes... I know that the usb port on my Linksys Cisco CM100 cable modem is an optional way to connect the modem to the computer. I wonder if I can use the usb port to connect my HP 1020 laser printer instead.

  The printer is not a network printer, and so I know that it may not work, but I have seen a few cases where a virtual port and install it as a local printer got to work.

  If I can connect the printer to the modem, and then he would give me a way to print from my laptop in the other room.  My printer is just beside my modem configuration and the router. I have a Linksys router WGR614 wireless who sees the devices on my network share, so I think he could see the printer connected to the modem (?)

  I couldn't find the answer to this anywhere. I didn't damage my equipment by blindly try this without knowing a little something. (I assume that the heart of my question is, on the CM100 usb port can be used for any usb device)?

  (I have Windows 7 64-bit operating system, in case you need to know).

  Thanks to anyone who can answer.

  djoseph

  A standard print server will allow you to connect a USB printer to your network. There are models wired and wireless depending on how you want to connect to the network.

• When I plug my Galaxy s captivate phone into the usb port on my computer, it will charge the phone but will not allow sharing of information from computer phone.

  Original title: usb with smart phone problem

  When I plug my galaxy s captivate phone into the usb port on my computer, it will charge the phone but I cannot share the news from computer to phone. In fact when I click on the computer icon, it shows the dvd, floppy disks and hard disk but not the phone. I use a mouse usb and headphones and they work fine. I tried to search for devices and it does not work. I run Defender pro anti-virus software and have checked the firewall, but I don't see that his block the phone. I don't know what else to do. Help, please. Thank you

  Hi Mike,.

  Just to follow up with you on that, that very well may be the cause. Especially when it comes to mobile phones, the real cable you use is very important to have all the features when it is plugged into a computer. Where you can try a new USB cable yet, I hope that whoever is completely compatible with this phone.

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon

• Cannot print from the HP PSC 1200 printer

  My HP psc 1200 'prints' a blank page.

  I am running Windows 7 on a Dell computer about 4-5 years.

  Printer worked fine until the other day when he stopped to find info from the printer.  If this is the problem?

  It would not be completed "suppression."

  I tried uninstalling and reinstalling, but no luck

  When I refer to 'all documents' and 'test page', it will not display order.

  It indicates also 'offline '.  What is the problem?  How she came like that, and how can I get to print "on-line".

  TIA

  Giborah

  Original title: unable to print

  Hi Giborah,

  Thank you for your update on the issue.

  I'm glad to know you found the cause and solved the problem. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. We will be more than happy to help you again.

  Thanks again for sharing!

• Are there any documents that is held in memory of the printer?

  I am looking for a recent document and it cannot locate in my computer.  I printed, I hope is a memory in the printer so I can get back to this page.

  No, for most home printers, the documents you print are not stored in the memory.  Some printers equipped with hard drives internal and can buffer or temporarily store copies, but if it is tell you the case of your printer manual or support web site.

• How can I transfer/copy a program from the hard drive on my computer on an external hard drive plugged into a USB port on my computer?

  transfer of a program on an external hard drive.

  What exactly are you trying to accomplish (goal)? You cannot save a program by copying its files/folders in Program Files in an external hard drive. To save programs, you must save the installation - CD, DVD, or the installable executable if downloaded media on the Internet.
  MS - MVP - Elephant Boy computers - don't panic!

• Print the PDF file of the brochure that goes right left

  How to create a PDF printed booklet that goes from right to left?

  Your version of InDesign is activated for RTL languages?

• Driver files that run the parallel port and USB port

  In the system information utility where to look to find the parallel port and the port driver USB, name of file that manages these?

  Know the drivers specific, is only half the story.  Why you looking for these drivers?  You have problems with your parallel port or USB port?  This can be caused by problems with drivers or it could be a hardware problem (hard to diagnose a hardware problem without good parts to swap and test).  If you need to update the drivers, you must use device (not msinfo32) Manager - or maybe clicking on an executable file that loads the drivers automatically (depends on how it is sent by download).

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need drivers (I assume that you want to the parallel port and USB ports), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Or run the Setup program of driver provided by the vendor of the computer or the manufacturer of the device.  Be VERY careful get Vista compatible drivers for these devices are difficult to identify (they usually come with the numbers of model or something like that if they can have serial numbers) and using the wrong drivers could make the problem (whatever that is) worse.

  If you update the drivers succerssfully and the problem persists, then it is probably a hardware problem.  In this case, contact the manufacturer of your computer for technical support (hopeully it is still under warranty) or bring it to a professional computer repairman (NOT Geek Squad or one of those big store centers because they don't really know what they're doing and charge a lot for this level of expertise) to have the components tested and possibly replaced.

  I hlpe that aid.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• can I load that an omni 10 threw the usb port

  a 10 omni can be charged using the usb port?

  Hello

  The recommendation is to use the charger that comes with the unit. You can still use USB port to charge, BUT it can take ages to get a full charge, and this may affect your computer.

  Kind regards.

• USB ports do not work after waking up Satellite A200 from sleep mode

  After that I spend my Satellite A200-244 "sleep" or "hibernate" USB ports do not work!

  Hi mate,

  already tried this:

  Open start and type Device Manager and then press ENTER, to start Device Manager. Click on the sign + next to "Controllers of Bus USB" and then in the list, you should see some devices called 'USB hub root'. For each one, click right, hit properties, go to the power management tab and uncheck the box "Allow the computer to turn off this device to save power." Then restart.

  Maybe it works. Another solution would probably be this Microsoft KB document:

  http://support.Microsoft.com/?scid=kb%3ben-us%3B812946&x=8&y=9

  Greetings