Is there a difference in features between the version of the apple store and the best version to buy for the Apple Watch?

Similar Questions

• What is the difference in features between the domain of Adobe Acrobat Standard and Pro controller?

  What is the difference in features between the domain of Adobe Acrobat Standard and Pro controller?

  See: http://www.adobe.com/products/acrobat/product-comparison.html

  Monday, June 1, 2015-16:00, jeanm18631066, [email protected]>

• Is there a difference in performance between Automation Plug-ins and script system?

  We currently have a tool that, through the system of script, merges the layers by mask layer groups, exports and then moves to the next group of layers.  There is a custom logic and channel fusion that sometimes occurs in the fusion of a group of individual layers.  These operations occurred in the scripting system (in fact, c# through make calls of direct function through Photoshop), and there are pictures where these operations take about 30-40 minutes to complete on very large images.

  Is there a difference in performance between the actions in this way rather than having these actions occur in an Automation plug-in do?

  Thank you

  Using the DOM or the ActionDescriptor, ActionList, ActionReference API? There is a significant slow down using the DOM when looping through the layers. I have that as something to improve, but for a document with large layers, I would recommend trying to get the layer + layer 100 + value County via ActionDescriptor and loop them in this way. It is however a lot of work! I hope I can improve quickly and you won't have to deal with the drafting of a workaround.

• NB200 - only little difference in speed between the modules of RAM?

  Hello everyone,

  Recently installed Windows 7 on my NB200 and thought I would setup an extra RAM.

  The RAM only I could get, was 2 GB of 667 MHz, as opposed to the 800 MHz supplied with the NB200. I thought that double the RAM would more than offset the slight difference in mhz between the new and old Rams.

  As I understand it, it's only little practice speed difference of real world, between the 667 MHz and 800 MHz RAM, is - this correct?

  Also: The 2 GB of RAM, I had had twice the amount of chips on the RAM slot than the old. Should I be concerned? I'm worried that doubles the amount of chips in a little place could lead to problems of heat/cooling... Any opinions?

  Thank you!

  There is no much difference between 667 and 800, in fact, I think the CPU at 667 anyway, but 800 races comes because of the limited availability of 667 RAM.

  Cooling should not be a problem if the RAM uses the same calendar and turn at the same voltage as the original of the RAM.

• How to measure the difference in time between the passage by zero of a sine wave and the rise time of a pulse on a same graphic?

  I have a sine wave of 50 Hz and a pulse of the signal on the same chart. The difference in phase between the two is between 0-90 degrees.

  Now I need to calculate the time difference between (when the sinusoidal wave passes through zero volts) and (when the pulse increases). The frequency will remain about even for the two signals.

  The request is for a three-phase generator. In simple terms, when the difference in time between the passage to zero of the sine wave and pulse increases increases, it means that the load on the generator has increased.

  I am a novice user of LabView (version 9, 2009), maybe it's a very simple problem but I was pulling on my hair for the past few days and couldn't understand anything. Any help would be greatly appreciated. I use DAQ USB-6008 to measure these tensions and the impulse of the generator and a sensor

  I have attached a jpg file (a graphic that I just did with excel to explain). The time 't' is what I'm trying to measure

  

  See you soon

  Zdzislaw

  Awais.h,

  For problems of this kind I recommend start writing the granular steps you would take to manually fix this problem.  You can't say LabVIEW (or any programming language) If you can't succinctly describe the solution to your problem.

  The I want to address this problem is to:

  1. find all the zero crossing points and edges on the rise
  2. for every rising edge find the difference between the timestamp and previous passage by zero

  Here is an implementation of this algorithm LabVIEW:

  

• no difference in price between the creative photography cloud adobe for obligation and for students?

  I see no difference in price between the creative photography cloud adobe indivisual and student. im a student how to 66% reduction as stated in the purchase of students page?

  Hi Sishir,

  The award is available for the plan than under the regime of the student teacher.

  Please see: pricing and membership creative cloud plans | Adobe Creative Cloud

  Alternatively you can contact Adobe sales for the same.

  Kind regards

  Sheena

• Validate the difference in days between the dates in a table

  Greetings,
  
  I have a tabular form and date on each line. When the user saves the form, I want to sort the rows by chronological order of these dates, then go get the first and last date, calculate the difference between them and validate it.
  
  Does anyone know how to do?
  
  From now on, I came up with this:
  
  1. a PL/SQL Page process "before the calculations and Validations' which creates a collection and inserts lines in my tabular form (p_c004 being the date field):

  begin   
    if apex_collection.collection_exists('UPDATE_DATES') then
      apex_collection.delete_collection('UPDATE_DATES');
    end if;
  
    apex_collection.create_or_truncate_collection('UPDATE_DATES');
  
    for i in 1..apex_application.g_f04.count
    loop
        apex_collection.add_member(
            p_collection_name => 'UPDATE_DATES',
            p_c002            => htmldb_application.g_f02(i),
            p_c003            => htmldb_application.g_f03(i),
            p_c004            => htmldb_application.g_f04(i),
            p_c005            => htmldb_application.g_f05(i),
            p_c006            => htmldb_application.g_f06(i),
            p_c007            => htmldb_application.g_f07(i));
    end loop;
  end;

  and
  
  2. a "PL/SQL Error: Validation

  DECLARE
    l_count NUMBER;
  BEGIN
    apex_collection.sort_members('UPDATE_DATES', 4);
    l_count := apex_collection.collection_member_count('UPDATE_DATES');
  
    SELECT
    to_date(c004(l_count),'DD/MM/YYYY') - to_date(c004(1),'DD/MM/YYYY') Difference 
  
    FROM 
    apex_collections 
  
    WHERE 
    collection_name = 'UPDATE_DATES'
    and to_date(c004(l_count),'DD/MM/YYYY') - to_date(c004(1),'DD/MM/YYYY') < 30;
  
  EXCEPTION
    WHEN NO_DATA_FOUND THEN
      raise_application_error(-20101, 'Error');
  END;

  In my understanding, the validation must sort the collection in chronological order of the dates entered, calculate the difference in days between the nearest and farthest date and return it if it's less than 30 years (the difference in days allowed). If it's more than 30 years, the SELECT statement does not return anything and my block of exceptions raises a custom error that will trigger the validation "process of refusal."
  
  But when I try this, it tells me c004 does not exist and if I drop the parentheses, it works, but of course, it does not give the desired result.
  
  Any ideas?
  
  Best regards
  Mathieu

  Assuming that your domain is c004 then I don't see the need for the sorting of the collection.

  You can write a simple SQL select that sent you the desired result.

  Maybe something like this not tested

  SELECT
    max(to_date(c004,'DD/MM/YYYY')) - min(to_date(c004,'DD/MM/YYYY') ) Difference
    FROM apex_collections
    WHERE collection_name = 'UPDATE_DATES';
  

  The test if the result is > 30 days. If that's what you want to know.

• The size of a difference in performance between the two different graphics cards

  Hey, I'm in the middle of upgrading my system and I try to spend my tax return on0 graphics cards. I'll run an SLI with Nvidia GTX 660 or 680 GTX. Now I realize the 680 is high the hand better than 660 I want to know is, it is better to the difference in price proformance wise. I intend to get two of them and SLI them, here are the two that I'm looking

  http://www.newegg.com/Product/Product.aspx?Item=N82E16814127699 - GTX 660

  http://www.newegg.com/Product/Product.aspx?Item=N82E16814127723 - GTX 680

  I'm running CS6 if I want to stay in the 600 series of Nvidia cards that are on the whitelist for CS6. I want to choose between these two cards because I'm under eyefinity right now and I can't go back, these Nvidia Surround support out of the box with any necessary adapters. MSI heatsinks are also fantastic with these cards.

  So basically what I'm asking, is the proformance go with 2 of the 680 years is worth the $500 price difference?

  Here is my system in its present form:

  Processor: AMD Phenom II X 6 3.2 GHz-> go to AMD 9590 x 8 5 GHz after I buy graphics cards

  RAM 16 GB Corsair Dominator 8-8-8-20

  Samsung 840 EVO 250 GB SSD (drive)

  Corsair 64 GB SSD as a scratch disk

  2 TB WD Black HDD as mass storage

  AMD Radion 6790-> will upgrading to one of the above cards

  Windows 8.1

  For After Effects, there is no reason to spend the extra money, unless you use a specific feature: the 3D rendering engine traced to the RADIUS. If you do not use this feature, and your focus is After Effects, then spend your extra money on RAM and SSD.

  See this page for more information about how After Effects uses the GPU:

  http://blogs.Adobe.com/AfterEffects/2012/05/GPU-CUDA-OpenGL-features-in-after-effects-CS6. HTML

  See this page for more information on material for Premiere Pro and Adobe After Effects: http://adobe.ly/pRYOuk

• Find the difference of pressure between the two transducers using a NI DAQ 6008

  Hello

  First of all, I'm a relatively inexperienced LabVIEW Developer, so my apologies in advance if this message does not have something, or otherwise lacks clarity.

  I try to develop a VI as follows the pressure difference between the 2 EME 3100 pressure sensors (4-20 my), related to two different pressure lines, using a NO-DAQ 6008. I would like for the acquisition of data to read the two transducers, then have him find VI the differential and write this differential in an Excel file.

  The data sheet for these sensors may be found at: http://www.gemssensors.com/Products/Pressure/Pressure-Tranducers/Sputtered-thin-film/~/media/GemsNA/...  It is a 3-wire system, with a voltage between 8 - 24V. I use an external power supply of generic brand to power sensors, which provides a maximum of 24V @ 4A.

  I drifted my physical connection (for the two transducers) this thread http://forums.ni.com/t5/LabVIEW/I-am-having-trouble-Omega-PX4200-Pressure-Transducers-to-where-I/m-p... and am relatively certain of the accuracy of the information. For purposes of signal conditioning, I use a 500 Ohm resistor between the signal of each transducer and the Earth wire.  On the side of software, I use the latest version of LabVIEW (2011) as well as MAX on a Windows 7 64-bit machine.

  In an ideal world, the sampling rate would be as high as possible, but 4 samples per second would suffice for all purposes useful.

  Given this goal, are there any sample of VI (especially for MAX, which I have not yet used) who would be similar/applicable to this project, specifically, regarding setting a sampling frequency, calibration of the transducers or affecting the pins/channels appropriate? All resources would be greatly appreciated.

  Kind regards

  MG Wilkinson

  Measure the voltage between the two resistance (resistance by probe 4-20 MA) using the differential inputs of the x 600.

  When you configure the task, you can read several entries at once, by entering in "Dev_ / AI0:1" in the physical channels and using the "several channels / {unique |}". multiple} samples"polymorphic instance.

  600 x can read 1kS/sec.

  Do maths/conversions on the table, and then simply subtract the two tables.

  Could also take some samples (10-100) at 1 kHz and their average together, give you a smaller rate effective sampling but with less noise.

  A loop of producer-consumer would be good architecture here, let the daqmx reading live in a loop and sends the data via a queue to a 2nd consumer that performs mathematical operations and write to a file.

  

• Differences in time between the start date and end Date

  I have a requirement to get the difference between the two dates, I am on the syntax below to fill, but it does not work. The syntax is the following:
  TimestampDiff (SQL_TSI_MONTH, "[< dStart_Date_ITAG >]", '[< dEnd_Date_ITAG >]'). Could you please help me on this. Thanks in advance
  
  Olivier

  Hello Roytson,

  I want to enjoy the sytem itself, I mean there are 2 custom fields start date and enddate, my function should take system only do not enter manually.
  could you please develop this thing.

• Difference in size between the 2 forms...

  Good day all.

  This may seem like a strange question, and somehow, I guess it is. But now.

  Difference in size form?

  I've drawn 2 forms that have all the same fields. The only difference between the 2 forms is 1 is English and the other is French.

  The French form is 1.4 MB and English are 2.1 MB.

  I had a quick glance and it doesn't seem to be something different between the 2 forms except as I said the language.

  The area using this form asked whether it would be possible to reduce the size of the shape as yours to send multiple copies (20 this time) and is limited to the total MB in an email.

  I use version 8.05.2073 of the life cycle of the designer

  Thank you all

  Chomp

  You can désincorporer fonts? If you do not need, also disable accessibility. Everything in file > form > Save Options.

• What are the differences in features between Acrobat 6.0 Pro and Acrobat Standard XI

  I'm trying to update Acrobat Pro 6.O for equivalent functionality under windows OS 8.1

  Hi Nic,

  Adobe sells XI standard Acrobat more. You can try the last DC of Acrobat.

  Free 30-day trail version Acrobat Pro DC. Download Adobe Acrobat free trial version | Acrobat Pro DC.

  You can check the Acrobat CC compatibility with different platforms & applications in web browsers and applications of PDFMakerKB doc.

  Let me know if you still have nay question or need assistance, we will be happy to help you.

  Kind regards

  Nicos

• Why is there a difference in length between 24 fps and fps 23 976 timelines with the same clip?

  I was working on a project of 23 976 fps and I tried to import a short animated sequence of 44 TIFFs in my scenario in my first CS5.

  I imported the sequence, interpreting the film at 23 976 fps (such as it was made in AE) to check before sending it to a finished House.

  First issue. Even if I set the framerate 23 976, first CS5, indicates me 23.98 on interpreting window film. I assumed it as a rounded number.

  When I drag the attachment to my 23 976 sequence, the clip shows 43 (!) length of frames on the info panel. It lacks an image. The sequence in the original video, it really lacks a framework.

  I decided to do a test. And placed the same clip, interpreted the same way on a sequence of 24 frames per second, and the clip shows as length of 44 executives on the info panel.

  How can we, same clip shows the different quantity of frames (I don't mean time, but just raw images), on different times? It makes no sense at all! If my sequence has 44 frames, it should show in the form of 44 independent frames of the scenario that I imported it. Am I entitled?

  Just for test, I ve imported from the same sequence on AE, and in it shows as 44 frames on a timeline 23 976. How can I trust to first frame interpret in this way?

  Just one thing. The scene used as basis for the animation of the AE, has 44 executives, and it was measured and cut in a 30s film on the same first which is having this weird behavior.

  Can someone explain to me what Just happened? It s driving me crazy!

  Thanks in advance

  Mauricio Mendes

  Before you import the sequence of images, go to Edit > Preferences > media... and together the basis of split time at 23.976.

• Seeking the difference in definition between the "release to layers (sequence)" and "Release to layers (Build)."

  To transfer all the layers of the AI to another Adobe app-release to layers is necessary, but I would like to know what the difference between these two. When we use one over the other? Any info would be greatly appreciated. If there is a source definition that I would like to know.

  Thank you.

  See:

  Illustrator help | Layers

• new hard drive - what is the difference in performance between the new installation of Windows 7 or a clone of old hard drive?

  I get a new hard Hard Drive (SSD).  The new disc is the same size as my existing SATA drive.  I can do either a new

  the installation of Windows 7 or a clone old hard drive?  I would prefer to clone the old hard drive and keep all my settings, etc.   It's empirical data on the performance difference between a new installation of Windows 7 or to continue with the Windows 7 which was 3 or 4 years ago.

  I know the conventional wisdom is that the new installation is faster, but, no matter who actually tested and compared the differences?  I know I'll get better performance of the SSD the SATA drive, but I don't know if it's worth the hassle to do a fresh install and redo all my programs and settings.

  Others that the performance of the SSD you should not see any differences.  If you do, you can always do a clean installation later.