Is there a discount for people with disabilities?

Similar Questions

• Laptop has Options of food (lid closed) for people with disabilities

  Hello-

  I use a monitor external when using my laptop Samsung QX410 and want to keep the computer when I close the lid.

  When you try to change the settings in the Control Panel/change Advanced Power/power buttons and lid, I have only one option, 'Sleep', which is disabled (i.e., grayed out). I checked that I have administrator rights and tried to change other settings of the power plan, etc., but can not set my laptop / privileges to activate the other options.

  The laptop computer was purchased with Windows 7 pre-loaded, and I contacted the support of Samsung. They tried to help me but eventually determined that it is a matter of Windows 7.

  Thanks in advance for your answer.

  ebaltazar - I set myself. This is the Samsung Fast Start program which causes the options disabled.

  To fix:

  Go to start programs/Samsung/Fast Start, which will open and you will see that the default setting is 'On '. Select 'off '.

  Return to the option of power control and the option to do nothing for lid close Action will be there.

  Pretty quick fix. Samsung surprised don't know when I talked to them.

• Blank Page for people with disabilities and additional installers

  Hello friends,

  First of all, I would like to thank NOR & veterans on the maintenance of this vast and useful forum where we can find solutions to almost all of our problems.

  I recently faced a problem when creating Setup program for my application (first time use). I found that page additional installers required to add the runtime and Daqmx drivers was empty and even the disabled (see the image attached). I tried to repair my Installation of Labview 8.2.1 (I also have Labview 8.0 installed on the system) but cannot correct the problem.

  Can someone offer please soultions or advice for my problem?

  Thank you

  Magalie

  
  

• eyeball and eyeblink controlled robot with prevention system of barriers for people with disabilities

  I'm working on this project bt I am unable to detect the eye ball

  Hello

  a few tips:

  https://decibel.NI.com/content/blogs/kl3m3n/2013/10/08/real-time-face-and-eye-detection-in-LabVIEW-u...

  http://forums.NI.com/T5/machine-vision/eye-controlled-wheelchair/TD-p/2651903

  Hope you find it useful.

  Best regards

  K

• Options registration and preferences for people with disabilities

  Help. I recently started using Captivate 3 again after a break of a few months. I need to save a simulation software project. When I select the type of Simulation software (Application or custom size) and click OK, I have the dialog box to select the window and start recording.
  
  On this dialog, I can choose the Manual Mode or full-motion recording. However, the check boxes to select demonstration, assessment Simulation, training Simulation, or Custom are all grayed out. Also, if I choose settings... here I can't select the general or the project settings in the tree view. They are disabled.
  
  Something is futzed upward in my configuration. Someone knows how to fix this? Thank you!
  
  Corbin.

  Oops. Too bad. I clicked around in the settings and it reset and works now. Probably my own stupidity. Please ignore...

• How do for people with disabilities has commandToolbarButton by other commandToolbarButton

  How disabled a commandToolbarButton by other commandToolbarButton using javascript?

  ActionEvent

  http://download.Oracle.com/docs/CD/E15051_01/apirefs.1111/e12419/tagdoc/af_commandToolbarButton.html

• Message: "the Security Center service cannot be started. I am running Vista, fully up to date with AntiVirus & Anti Malware, & others. Unable to change the center of security of people with DISABILITIES.

  Message: "the Security Center service cannot be started. I am running Vista, completely up-to-date with Avira AntiVirus, Malwarebytes - Anti-Malware, MS/scans of Windows Security Center (for example MS Fix It programs Center), etc. No Malware has been found. Despite me trying to re - set the Security Center using start > Services > SecurityCenter > change to "Automatic (delayed start)" people with disabilities > start > output the re-creation is not the owner and I'm back with no security - with the same message as the original. I spent hours trying to deal with this. There is no known new applications/programs, and the problem started about 3 days ago. Help requested - thanks. JohnG - Sydney

  Hello

  ·         Are you can change the Security Center service parameter by using a different user account on the computer?

  I suggest you to make sure that Windows Defender is running. Follow the below mentioned articles and check.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the method above is not enough, then I suggest refer you the link try the steps and check if that helps:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

   

  Note:

  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  If you are using the original computer and the new laptop image, you will need to purchase a product key to activate the copy of windows installed on the laptop.

  Hope the information is useful.

• How to remove society and ease or do the research-people with disabilities

  Hi support them.

  How to remove the information society and the ease or make this information search-people with disabilities?

  Thank you.

  Terry

  There is no way to do this currently without direct intervention of the database.   Here are a few options:

  1. create a social movement archived old facilities below with the role of facility Relocator

  2. turn on the SCRM BU security and "deleted" company/resources associated with a bushel, no one has access to.

  3. remove the company and the installation of the database.   Support or a Dev in Dev session may be able to help with a script.

  We plan to address this in a future release.  Please submit a request for improvement around the needs of your business to ensure we cover your use with improving case.

  Thank you

  Kelly

• After updating FF later, all the names of people with disabilities & messed usr

  After update of FF to the most recent (FF21-> FF49.0.2), all the names of people with disabilities & messed usr. So when I go to any login page, ago selected from various usernames, but disabled people come. Therefore, total hassles & no use. There is no other Q & A, this could be an isolated problem. Should a safer update in the steps as 21 to 28 to 43 to 49 or what is recommended to avoid this problem?

  Firefox 21-31 to memorize the connections a database file named signons.sqlite in coordination with signons3.txt . Firefox 32-49 now use logins.json in coordination with signons3.txt to store connections.

  What version do you have now? If you use a newer version than Firefox 31 - Firefox 32-49 - you can try to configure Firefox to redo the conversion of signons.sqlite in logins.json as follows:

  Overview

  Step 1 is to change a preference, step 2 is at the exit of Firefox and hide logins.json step 3 is to try a new conversion

  Toggle a preference

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the access code and make a pause so that the list is filtered

  (3) double click on the preference signon.importedFromSqlite to switch the value from true to false (after Firefox performs the conversion once again, this will be true in itself)

  Hide the messed up the file logins.json

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Break while Firefox finishing his cleaning, then rename logins.json to something like logins.old, or I guess you could remove it if it is really unnecessary.

  Launch Firefox to trigger a new conversion

  Launch Firefox back up again. The transformed logins with success this time?

• Problems with accessibility for people with low vision problems

  The company I work, developing courses that are often made for people with a Visual acuity greater than 20/70. Thus, the requested solution was that courses should have a button that changes the size of the text, and the user can choose what size is better for him. The problem is that you can call a javascript function that makes Web sites, but the same features that make it, does nothing inside a captivate course. Due to the size of the land, there a lot of hard work to do 5 States of the text of a legend to each of these texts, because javascript are much more quickly and dynamically.

  Someone at - he has worked with such a prior problem, which has a better solution?

  No I have not met this particular query before.  But I think it probably means using Captivate would work in this case too.  With the exception of the course adapted and dynamic text that is generated from the inserted variables, most of the text within an release of Captivate gets transformed into images.  That is why the javascript function you mentioned earlier does not work.  There is no text to expand, only the images.

• Active HTML appear of people with disabilities in the media designer

  Just getting started with the DMS 5.3. I added a few test html resources in the DMM, but when you create a presentation in the media designer, they appear dimmed, people with reduced mobility. What is the reason for this?

  Hi Jacob,

  Which element of the designer helps you when trying to add to the HTML assets? If you choose the 'Media' item, it is expected that you cannot load HTML in there. You must use the 'Playlist' with "All Types of media" element to add HTML content.

  Kind regards

  Marco

• The latest update of firefox is not compatible with trend micro security and people with disabilities, it's when I clicked on install. How to bring back my trend micro?

  I downloaded a firefox security update. When I clicked on install (or apply), I was told it disabled my security from trend micro, and there is no version compatible with trend micro. He told me they keep control and let me know what is available. NOT GOOD. I paid a lot of money for my trend micro and want it to be functional. Help! I didn't click on finish. Does that mean the upgrade is not installed and that trend micro still works?

  I seem to have fixed that by going to the site of Trend Micro and upgrade to the latest version of Trend Micro Titanium 2012 V5.0. It uninstalled the previous version on my computer and then install the latest version. Trend Micro is working now and I can browse with Firefox. The upgrade was free.

• People with disabilities Add ons for the last pass and XMarks running Windows 10

  Last pass. E Web and XMarks modules disabled on my PC using windows 10. My Mac uses the last pass, XMarks E-Weband and it still works. Why are they add ons disabled on the PC, not Mac. I've used these all day and if Firefox will continue to turn off these three very important modules, I'll use another browser.

  You have posted here with Firefox 41, which is a Beta version.
  Is your Mac using Firefox 40 / 40.0.2 the current release version?

  Not all extensions are compatible with the preliminary versions, such as the Beta, depends on the particular extension and if the developer of the extension supports the beta versions of Firefox.

• Research Contacts app for people with e-mail does not (applescript)

  Hello

  I've been tryingg to run a script that I found on the internet and it does not work - simple search

  tell application "Contacts"
    --look for a person who has this email address (see note at top about case)
    try
    set foundPerson to (first person where its value of email contains theEmail)
    on error
    my Logger(1, "Scan Address Book: No entry for " & theEmail)
    return {}
    end try
    try
  
  doe

  (sory for the post above, I don't no how to change...)

  In any case, the script goes like this:

  property theEmail: "[email protected]."

  Tell application "Contacts".

  Try

  the foundPerson value (first person when his value of email contains theEmail)

  in case of error

  My recorder (1, "address book Scan: no access to the"& theEmail ")

  return {}

  try to end

  ↑ This is not any email (he catches error), although in the address book, there is an entry with [email protected]...

  I tried a lot of combinations, what am I doing wrong here?

• External access to my computer by some for people with problems to which they feel may be due to a problem of Microsoft.

  In February, I received a phone call announcing that he was a Department of Windows software specializes in the examination of the problems I could be hard and try to find solutions.  Asked me, after a long sales pitch, go to my computer and with them, find a few concerns I had with.  This resulted in giving them access to my keyboard and the computer.  They responded by showing some recent files in which there was a record of the unknown parties and their attempts.

  Once a land sale noted that they could solve these problems on this computer and on two other computers in my house for the sum of $350 per year. It sounded attractive and I "bit". Over the next few days, I could see the activity, but in some cases, the problem worsened. The second day an additional $ 250 has been asked and I foolishly allowed.  However, a week later had flown two additional transactions of $350 and $250 on my account.  I immediately went to my Bank to start a process to stop the payment of these fees and to investigate their origin.

  Since then I have received many calls, trying to make me to authorize their making more work.  I refused to play this game.,.

  What I'm trying to determine is if their access to my pc and access to private definitely files blocked?

  Thanks for any help.

  Chuck in Columbus

  Charles

  The damage is already done.  It is never a good idea to allow remote access.  At first I would run a malware scan with malwarebytes.  If you have financial information on computers I would you banks and change your passwords

  The only way to ensure that you are not infected, is to re - install the operating system after a format.  Otherwise, we have no way of knowing what they were doing to computers.

  They already have you credit card numbers.

  In short, there is no way to block them without the re - install and it's kind of closing the barn door after the horse has disappeared.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products