Similar Questions

• a few waves in my monitor working with the premier cc... my VGA Nvidia GTX 650 card. How to fix it.  drivers are updated.

  a few waves in my monitor working with the premier cc... my VGA Nvidia GTX 650 card. How to fix it.  drivers are updated.

  a few waves in my monitor working with the premier cc... my VGA Nvidia GTX 650 card. How to fix it.

• Studio XPS 8100. Update graphics Nvidia GTX 650 or 750 GTX

  Hello

  I have a studio XPs 8100 with a Radeon 5770 (1 GB) graphics card. If it was a good card when I bought the system, I think to upgrade the card to an Nvidia GTX 650 (4 GB) or a 750 GTX card 2GB.

  Apart from buying a new power of W 600 or 700 unit, is there anything I should know about?  Did anyone tried these cards in the XPS 8100? The motherboard and the case would argue one of them?  I have a GB of Ram 1333 6, I have to increase it too?

  Thank you very much in advance for the help.

  I have not had to install a new ps. The 750 TI FTW attracts only and extra 25 watts and a regular 750 TI does not yet use this extra power. And Yes, you can change the ps in a 8100 but they are irregular in size but can be found. I'd say you'd be fine with any 750 cards and honestly, you can get 50 fps or better in most of the games with them, a lot of maps. My son has a ti 750 FTW in a xps 8700 and gets 70-80 fps in his favorite tank game.

• Satellite P100 - nVidia Geforce Go 7600 graphics card crashed

  Hello!

  My graphics card is broken down, and after removing dozens of screws, I checked that it is not built into the motherboard. I could he dismantled after removing the screws of the bottom three.
  -My laptop is a Toshiba P100-342 (PSPA3E-0QE038SP)
  · Here you can see the model number: http://imageshack.com/a/img856/1917/6s6f.jpg
  -The graphics card is a nVidia Geforce Go 7600.
  · Here you can see on the motherboard: http://imageshack.com/a/img834/5825/ktl8.jpg
  · And there, alone on the table: http://imageshack.com/a/img839/3525/6of6.jpg
  · It's the nVidia chip: http://imageshack.com/a/img836/4343/q7lg.jpg

  Research in the internet, I found just 1 card graph similar to mine. But I don't know if it will work, because I read that the devices must be exactly the same as the original:

  c918 http://www.eBay.es/ITM/New-Toshiba-A000013050-NVIDIA-G73M-128MB-GeForce-Go-7600-Video-Graphics-Board-/360821279000?PT=PCC_Video_TV_Cards&Hash=item54029f & _uhb = 1

  I asked the seller eBay on compatibility and his answer was: "Please contact Toshiba for the complete product compatibility." But Toshiba does not provide any support after the expiration of the warranty (in Spain).

  Anyone replaced this graphics card? Do you think I should buy the graphics card of this ebay? Are there other solutions? (for example: replacing the entire motherboard...)

  Thanks a lot in advance.

  I never had to replace a graphics card in a notebook, but I wouldn't buy any part if I m not 100% sure if it would be compatible with my laptop.

  Is that SATELLITE P100-342 was equipped with a NVIDIA GeForce Go 7600 (name of code G73M) PCI Express x 16 (GDDR2 dedicated 256 GB RAM) graphics card.

  The part on ebay supports 128 MB only and that's why I think that the two parties are not the same.
  This might be the reason not to buy this piece.

• HP 120-011 to: attach a new Nvidia Geforce GT 710 graphics card to HP 120-011 in

  Hi, I want to install a new graphics card on my desktop pc HP 120-011 in . My office is currently integrated Intel HD graphics 4400 . I recently bought a Nvidia Geforce GT 710 graphics card, but when I inserted in a PCI-E port, the pc is not able to detect it. So here's my questions-

  1. why this graphics card is not detected by my pc?

  2. then the 180 Watts PSU, which is installed on my system to manage this card? If not, should what power supply I buy?

  Its emergency, quick reply pls. Thanks for the help.

  Hi there @Abhishek_India,

  Welcome to the Forums of HP Support!  I understand that you are having problems with an update of the graphics card.  I'm happy to give you a helping hand with this.

  Looking at the map you want to use: GeForce GT 710 specifications, it shows the following: Minimum System Power requirement (W) 300. This means you want to preferably a power supply in your computer that exceeds this amount, just to be sure.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Administrator gets an access denied, not enough user priivileges to run the utility in elevated mode.

  Administrator gets an access denied, not enough user priivileges to run the utility in elevated mode.  No high privilege invites provided.  Command is CONVERT F:/FS: NTFS.

  F: is a USB drive of 250 GB FAT32 mounted port.

  What is the solution for this issue.

  OS Vista Home Premium SP 1.

  http://www.mydigitallife.info/2007/02/17/how-to-open-elevated-command-prompt-with-administrator-privileges-in-Windows-Vista/

  See if the methods above will help you.

  See you soon.

  Mick Murphy - Microsoft partner

• nVidia GTX 650 ti only supports DirectX 10, why?

  Hi I'm new here, yesterday, I bought a ti (used) Nvidia GTX 650 graphics card.
  But this card does not support directx 11. I know that you do not...

  It's the image...

  

  I installed the 331 WHQL driver and also tried the last 336. But none helped me.
  Please tell me whats wrong with my graphics card!
  Please...
  I can solve this problem?

  I even tried on another PC with Windows 7 64 bit on it, but no.

  Is it a windows fault, not alone directx 11 app works for me. Even though I installed directx redistribution that comes with 4 fields of battle.

  I guess that the card is a fake. All the 400 series Nvidia cards on support DX11.

  (They change the information on the cards BIOS to display a different model name/number).

  Other specifications are not correct for a GTX650ti.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-650ti/specifications

  The GTS 250 is the closest I can find. It has also 128 cores Cuda (vs 768 on the GTX650ti).

  The number of Cuda cores is the main indicator to determine what gpu card.

  The GTS 250 is a low end card, not suitable for BF4, although she did not support DX11, but the rest

  the specifications of your card are even lower than those in the link below (with the exception of the memory bus speed

  (@ 256 bit). The other odd part is the 2 GB of VRAM. A GTX 250 should be not more than 1 GB.

  It may be an OEM version (built by a mfg like HP or DELL computer). They are often low clocked variations of different models.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTS250/specifications

  Note that even a real GTX650ti will not run BF4 with keen @ 1920 x 1080.

• NVIDIA Gtx 650 ti boost vs Nvidia Gtx 580

  Hello world

  I have a difficult question on nvidia gtx video cards.

  The nvidia gtx 650 ti boost adeguate is for editing video in full HD with Premiere Pro Cs6?

  I chose this video card, because the price is very interesting: 'only' €150 (more or less)

  Another question: is it sparkly for editing sporadically After Effects Cs6 of Pentecost?

  I compared the 650 gtx ti boost with the gtx 580. The second is more powerful, but the price is €450 (more or less). I found the gtx 580 used at €200.

  Question: What is the best choice? GTX 650 ti new boost or gtx 580 used (and perhaps overclocked)?

  Thank you.

  Reference:

  Pushed GTX 650 ti http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-650ti-boost/specifications

  GTX 580 http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-580/specifications

  Yes, but not only the CPU, it will be the processor, the memory and the disk (s) that will be the bottleneck. The 580 will be idle most of the time since the rest cannot follow.

  It's like install a reducer of formula 1 in an old Fiat 500 for 10 years.

• NVIDIA Geforce GT640 good graphics card for PrE10 despite the bandwidth low memory?

  Can anyone confirm that the nVidia Geforce GT640 is a reasonable graphics for first 10 Elements and Photoshop Elements 10?

  The person who set up my office of 3770K Core i7 with 16 GB of RAM at 1600 mHz installed map GT640 nVidia with 2 GB memory DDR3. He said that it was a good (low cost) card for video editing because it has 384 CUDA cores - very useful for video editing. I'm pretty ignorant on graphics cards, but as the power consumption low, 65 watts and deemed cool temperature resistance. I have read since DDR5 memory would have been much faster due to a higher bandwidth memory - say 80-90 GB per second compared to 28.5 Gb per second for DDR3 memory on the GT640 map. I've been after use of economic power. DDR5 memory cards use 110 watts upward and run a lot hotter than the DDR 3 cards, all other things being equal. Really fast cards require a special power and cooling.

  Does anyone know if the bandwidth limited memory is important in video editing? Speed is much more critical in the game than in video editing? Are other attributes such as 384 hearts CUDA, synchronization of nvenc, dedicated encodment, 28nm architecture Kepler, frame buffer of memory 2 GB, 1.3 billion transistors, many units of texture - more important than bandwidth memory in video editing? Limited by memory bandwidth DDR3 affects the image quality?

  I read that the GT640 would be much faster (producing the best image quality?) as the HD4000 integrated Intel graphics processor Core i7 Ivy Bridge. Is it so?

  Windows 7 Home Premium 64 bit and all programs are installed on a SSD 120 GB OCZ Agility 3. My data drive is a 1 to 7200 RPM Seagate SATA 3. I have a nice 21 inch ASUS LED monitor and recorder blu - ray LG vs228n.

  I did a lot of editing with PrE 3 with a desktop Dell 3.06 gHz hyperthreading and Win XP. The output and even control the preview was clear and stable. I'm continuing to capture a mini tape dv standard definition of a 3 months Panasonic handycam FireWire, but plan to upgrade to HD 3MOS to flash memory. I do really small control - about 7cm wide - PR10 screen, because the quality of the preview image is much poorer than the quality I experienced with the first elements 3 with Win XP program. This is just an indication of the memory gain in pre 10 previews? I expect the output to be much higher, although still mpeg2-DVD quality until I update my camera. I put the record on the maximum bit rate.

  In any case, despite these reservations with the quality of the preview, the GT640 seems very well on stage. Quality of the image in Photoshop, and online on my computer is excellent.

  I updated the driver nVidia yesterday to version 306.23 display.

  Almost all graphics cards forums are subject of the game. I hope to see more forums on graph editing here.

  What do you think of the 2 GB nVidia GT640 for editing with 10 pre-Photoshop Elements 10? How about image quality in the pre 10 monitor compared to the quality of the production? Quality of the image in the monitor of the PrE 3 sharper and more stable, because I imagine?

  Regards, Phil

  Premiere Elements is not chart-map-dependent. You should be fine. In fact, finer.

• Surrently there is no support for NVIDIA 660GTX GEFORCE 3D graphics card not rendered ray trace in After Effects CS6.

  How can I get Adobe to provide rendering support traced 3dRay

  for the GPU so that I don't have to go buy a GTX 670, 680 or 690 card, along with a new power supply, which it will need to run?

  There is a 'hack' that is displayed all over the internet which explains how to add your GPU to the list of the EI of the cards 'approved '. Note that this is a feature not SUPPORTED in CS6, so proceed at your own risk.

• Reference Dell Desktop-replacement for Nvidia GeForce GTS 240 graphics card

  Nice day. I hope an expert can help me.

  My computer: Desktop computer Studio XPS 8100 Dell, intel Core i7 870 2.93 GHz, 8 MB, etc.
  Graphics card: NVIDIA GeForce GTS 240 single memory 1 GB. Reading, not sold at retail and is now no longer available.
  Unit of power: 350 Watt maximum.

  I do not use the computer to play games.

  For various reasons, you can Please provide DETAILS for me a graphics card in replacement of approximately the same 'power' +. I can myself, slot load driver and be operational. Don't not changing other pieces (I hope) and there seems to be so many available graphics cards.

  I hope for the purchase of the graphics card via Internet, British supplier and then abroad for me.

  In the meantime, thank you for your help.

  Leonard

  Hi Skanter - just saw this message-hope it comes in time

  I had this problem with mine - it was also to achieve 90degC. It is caused by a really poorly designed cooling system - the fins of the radiator are locked behind a metal shield and the fan blows into it.

  What you need to do is: -.

  (1) turn off and unplug everything from the PC

  (2) open the side panel and disconnect the audio cables and power of GPU

  (3) remove the mobo

  (4) with the help of a tiny posidrive screwdriver, unscrew the thin metal cover of heat sink

  (5) use a brush to remove all the dirt you may see! DO NOT BLOW IT OUT WITH YOUR BREATH!

  (6) reassemble and hopefully enjoy the silence!

  If you still get the noise the chances are some dust penetrated fan (this happened to me when I used compressed air to blow the heat sink). Replacement fans are as rare as horse poop to switch I could not even one of the original manufacturer (path to the bottom of the chain - don't expect any help from Dell or nVidia here, I'm afraid) but are thankfully easy to fix.

  GTS 240 fan fix: -.

  I do memory-sorry if I get something slightly wrong!

  (1) remove a map as shown above. Once the radiator fan cover will be exposed.

  (2) very gently, using a pair of small screwdrivers hanging under the blower rotor, gently lift the rotor clear of the case. He doesn't want to go at first, but be patient and try and apply steady pressure on each side.

  3) out of the bearing once clean any muck-it only takes a small amount here because of the noise.

  4) applied with a headset, a tiny (and I mean tiny) bit of WD40 (don't know what this is called in the United States-but it's a wonder spray!) for the bearing

  (5) wipe off - you'll need that the strict residue on the tree

  (6) reassemble and get started!

  If you are worried about prising off the rotor (or indeed I was wrong) you can undo the radiator all of PCB by unscrewing the screws with springs on them - this allows access to the screw bit to hold the fan. Then you can cancel these abd slide the cable out which means that you can clean the bottom - but the rotor must always be removed to lubricate the bearings.

  Good luck

  Nick

• NVIDIA Geforce Fx 5500 Graphics Card Driver Help in windows 7

  Hello

  I have a Nvidia Geforce Fx 5500 and default windows 7 installed graphics card "Standard VGA Graphics Adapter" now, I tried to uninstall and it said to reboot, but when I reboot it automatically installs the same vga graphics... I've installed the drivers and software from nvidia but the vga standard on wrinkles it graphics card... I tried to update the driver with the nvidia driver and it says the best driver for your device software is already installed windows has determined the driver software for your device is up to date... "graphic card vga standard" without appropriate drivers for my graphics card windows works like crud... I can do... I tried to stop the windows update automatically install device drivers and who did nothing... as soon as the computer restarted, it installed the driver vga... even in safe mode remains the same

  Thanks for your time

  There is no drivers Windows 7 for the GeForce FX 5500.

  You need a new graphics card. Until then, VGA Standard is all you can get.

• When I just click on what to get a drop down box is invisible until I run the cursor over the items in the box!

  Well, when I just click on something to get a drop-down list in the box is invisible until I run the cursor over the items in the box!  Also, I double click on it to make it open!  any suggestions?  Also, I may be wrong on the subject of Windows.  Good to use is not good at fixing my computer.

  Thank you Debbie

  go directly to Microsoft update, you have all updates to sp3 and day.

  An analysis of the express and install all high-priority, then do a custom scan and install the RootKit updates.

• There is no screen display once I installed an AGP graphics card

  I have an AMD semprom computer, 2 GHz, 512 MB of RAM.  I installed a new (5500 GFX) AGP video card to replace my onboard video.  But then, when I started my computer it didn't display, the monitor will slow as.  I followed the instructions given to me, I uninstalled the onboard graphics drivers and disable it in the BIOS before that I installed the AGP card.

  What should I do? Is there a compatibility issue?

  Hello
  go to this site and down load the latest version of the driver...  http://www.nvidia.com/object/winxp_175.19_whql.html uninstall the new graffix card and software and reinstall with the new software, make sure the card is in place please click the checkbox as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

• Dell Studio XPS 8000 - Asus Nvidia GeForce GTX 750 Ti Graphics Card

  Hi I have a Dell Studio XPS 8000. Information on the system it's an Intel i7 CPU 860-2.8 GHz 2.79 GHz and 6 GB of RAM. operating system 64-bit, x 64 based processor.

  I would like to know if I could adapt an Asus Nvidia GeForce GTX 750 Ti graphics (2 GB, GDDR5, PCI-Express 3.0) without any problem? Or is there a better option?

  The current map graphic is a GeForce GTS 240, that it came with.

  I searched the internet to find out that if that would be ok, but became confused if the power supply is sufficient, the appearance of it bed 350w max power. I can't find some people say no and Yes.

  My computer knowledge is Basic.

  Thanks for any help.

  You're better than replace the power supply Dell with a retail food more high wattage. Then the video card will be fine. Read your Manual for instructions.