is there a problem with vista and microsoft wifi?

Similar Questions

• problems with vista and microsoft set 32-bit or 64-bit.

  try to solve the problems with vista and microsoft fix it.  This error code 0 x 800400154 came up saying that they finish their using 32 bit and I have a 64 bit what they say.

  What version of the operating system Windows am I running?

  Windows 32-bit or 64-bit

  What Microsoft FixIt you try to run?  (There are MANY of them - they are simply the written scripts that do the manual steps in the KB article for you).

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Is there a problem with ValueChangeListener and af: table?

  Hello...
  
  I use JDeveloper 11.1.2.0.0
  
  Is there a problem with ValueChangeListener and af: table.
  
  Here my problem...
  
  I have two inputtext in af:table and I want to change the value of inputtext2 when I change the value of inputtext1
  so I put the autosubmit = "true" to inputtext1 and set the valuechangelistener method that is in the page bean
  and I put the partial inputtext2 trigger = "inputtext1 id".
  
  but when I run the page and change the value of inputtext1 that nothing happens.
  
  But if I have the previous scenario in af:panelFormLayout instead of af: table its work and the value of inputtext2 is changed to the user.
  
  any ideas...
  
  Thans.

  Sorry for the delay... :(

  And why if I use page JSF is the binding property disappears
  in the tab advanced in the property inspector.

  If you cannot power discovered the binding property in the palette of the means, your jsff page is automatically linked.
  If only the problem.

  try to create the new page jsff, while creating jsff, finally there is radio box something like
  do not expose the UI components automatically. check and create.

  and create a java file. Then you can bind components with the java file as you wish.

  to check your jsff page is autobinded are no means?
  Open your jsff page.

  Menu's that are on it - in this section. You can see the design menu that struck. If you hit it means you see Wizard property page go to the tab component binding
  There is a check box available

  If the box is ticked means that you page are automatically linked. If this isn't the case, you must link.

  -edited lately.

• problems with Vista and msn

  my laptop had vista business on it originally, it crashed a year ago and the store put windows 7 Home Edition premium on it, last week I had to have my hard drive changed due to problems with it and computer scientist put my vista business back on it, I thought I was brilliant as always I like vista , the problem is now I can not MSN up on it it keeps saying IE he blocked, IE 9 will not download, I play Facebook games and many of them won't load properly, tried to install service pack 2 for vista and it goes on to say that I have to install service pack 1 in the first place , its already there and updated pack 2 but still will not download. Someone at - it answers or useful tips or advice they can give me to have an entirely new work laptop

  Yes 100% positive sp 1 is installed and updated, already tried all the links you have kindly posted, was trying to do it for 12 hrs before I posted this question, I have 64 bit but that he already knew who didn't need the computor to tell me, I finally returned to the it guy and he discovered that the lap top returned to the original IE 7 when the hard drive has changed it dosent msn so therefore all the problems, he finally put IE 9 for me and the two vista service packs and support now msn works finally done my f/b, so Happy Days

• Internet Explorer 9 problems with Vista and Windows 7, are there known issues that are causing to freeze or crash completely computers?

  I was warned of updates via Windows Update Internet Explorer is available (important update) for my desktop running on Windows Vista and my laptop running on Windows 7.

  I had to go back to Internet Explorer 8 on Vista because it keeps freezing. Is that what someone else has experienced this problem because I'm not going back on until I know it is safe to do so. Can someone advise me on this please?

  Window 7 is on my computer, but my laptop but since Internet Expplorer 9 installing my computer has an accident and I received a message saying that windows had closed my computer to save my files etc. also since the installation, I get a black screen, does not last a long time but its worrying because that's what happened before the crash. Can someone advise me on this please?

  I am a real novice, not to speak of mind at all and I was wondering also if someone else knows the problems that I am and if you is microsoft aware of these problems and try to solve a problem for them. I think they have out there soon.

  Are you worried? Yes. any aid granted by a person would be much apreciated. Thank you

  I was warned of updates via Windows Update Internet Explorer is available (important update) for my desktop running on Windows Vista and my laptop running on Windows 7.

  I had to go back to Internet Explorer 8 on Vista because it keeps freezing. Is that what someone else has experienced this problem because I'm not going back on until I know it is safe to do so. Can someone advise me on this please?

  Window 7 is on my computer, but my laptop but since Internet Expplorer 9 installing my computer has an accident and I received a message saying that windows had closed my computer to save my files etc. also since the installation, I get a black screen, does not last a long time but its worrying because that's what happened before the crash. Can someone advise me on this please?

  I am a real novice, not to speak of mind at all and I was wondering also if someone else knows the problems that I am and if you is microsoft aware of these problems and try to solve a problem for them. I think they have out there soon.

  Are you worried? Yes. any aid granted by a person would be much apreciated. Thank you

  I am I have the same situation, because I installed Internet explorer 9. The only thing that differs with us is that I kept IE9, and I'm dealing with it full of hope that MS will return with a patch soon!

• Problem with Vista and XP computers Internet connection sharing.

  I have a host computer running Windows XP service pack 3, with an of Virgin Mobile Broadband2Go modem and a laptop computer with Vista. The host computer is connected to a Microsoft MN - 700 via a CAT5 network cable. The laptop is connected via a wireless connection. I'm sharing the Broadband2Go internet connection by using Internet connection sharing. I enabled sharing on the network, on the host computer connection. But the laptop does not connect to the internet. I can ping the host of the laptop, but cannot ping the laptop computer from the host. I have tried everything I can think of, to get the job of network. He worked, until Thursday. Thursday, there is some automatic updates installed on the host computer. They have been updated for security. I don't know if updates of security would have affected the network or not. All helkp would be appreciated.

  Thank you

  Oscar

  It is a facility that is complicated, because the host computer and the MN-700 can act as routers and DHCP servers, making it uncertain given the laptop its TCP/IP configuration.  Here are two ways to make it work:

  • Use the MN-700 as a router: connect the host computer to the "Modem" port of the MN-700.  To do this, interface LAN of the MN - 700 must have an IP address in a different subnet from the 192.168.0.x subnet that uses ICS.  The laptop will be able to ping on the host, but the host will not be able to ping from the laptop.

  or:

  • Use the MN-700 as a point of access only, not as a router: connect to the host computer to one of the MN-700 Ethernet ports and disable the DHCP server integrated of the MN-700.  Both computers should be able to ping each other.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Problems with Vista and Internet Explorer?

  Having difficulty with IE on my hp Vistaq pavilion

  I'm sorry to hear that. Unfortunately, I can't help you because you have not provided any information on the problem or your computer. Help us help you:

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  In the meantime:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware MS - MVP - Elephant Boy computers - don't panic!

• Is there a problem with accounting and 4.1 of the ACS

  Good day to all,

  I just installed a new server with ACS 4.1.

  This new installation 4.1 ACS is approved, I will retire my old server that ACS 3.1.

  At this point, the only problem I have with ACS 4.1 is with the accounting.

  For example:

  I used a test-router with all the necessary config pointing to my old 3.1 ACS. Everything works fine (authentication and accounting). If I enter a command on the router test it's journal on GBA 3.1.

  Now, if I change the test-router to point to the new 4.1 ACS, the ACS 4.1 will authenticate the router test correctly, but won't save any command that I enter the router test. I did a shot between the test-router and 4.1 of the ACS and the router test sends accounting statement ACS 4.1.

  There are many different configuration of ACS 3.1 4.1, but as far as I can see the config on the two ACS is as similar as possible.

  Y at - there anyone out there who could do 4.1 ACS to process accounting properly?

  Any idea will help you.

  Thank you

  Frank

  Here is my config:

  AAA new-model

  AAA authentication login default group Ganymede + local

  connection of AAA No.-AUTH authentication no

  AAA authorization exec default group Ganymede + local

  AAA authorization commands start-stop Group 1 Ganymede +.

  AAA authorization commands start-stop group 15 Ganymede +.

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 1 by default start-stop Ganymede group.

  AAA accounting command 15 by default start-stop Ganymede group

  !

  192.168.100.16 host key radius-server *.

  (the above command is the only command I change to point the finger 3.1 ACS or ACS 4.1)

  RADIUS-server application made

  Please use the following link. It has 4.1 cumulative patch that contains the hotfix for bug.

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-3DES

  Don't forget to download the readme text also.

  Rate me if it helps.

• Problems with Vista and Visual C++ runtime library

  I have vista. Recently, at the start, it doesn't let me log on.  Before connect you, I get a message saying C++ Runtime Library, then this application has requested the execution of finishing in a narrow path.  Any ideas why is this happenign and how to fix it?

  Hello

  try a restore of the system in safe mode for before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• manage the z-index property in the chrome browser (was: is there another problem with Chrome?)

  Hello

  I wonder is there another problem with Edge and Chrome.

  I know that something got sorted out but now I have a problem with rectangles (such as the hitboxes) not appearing is not in Chrome.

  Anyone know why this is happening?

  Hi Robyn,

  Looks like a problem with chrome. He is not able to manage the z-index property (although set) in this case. Due to which the user is not able to click on the button that is hidden by another element.

  There is a workaround solution you can do on board animate:

  You simply select the item named "s_cpl_fa_nav_x2" in the Panel edge ' Elements' animate and drag just below the element named "s_cpl_fa_0_guide_page1" and delete the selected item. This will place the first below the latter, with regard to the stacking order of the UI, and so the click event will work.

  I hope this works.

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Vista seems to ignore the free arp packets. There are details about this problem with Vista?

  There are details about this problem with Vista?  Thks Jerry

  Hi Jerry.Smith

  You can check this link for more information:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/thread/c6cb9f57-7D5D-4B75-A79A-ff0806300fbe

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A message box you informed that there is a problem with DirectX and cannot start Command Conquer 3 &.

  Original title: problem with starting game.

  I'm trying to play Command Conquer 3 & on my computer but cannot start the game, whenever a message appears saying that there is a problem with DirectX.
  The game needs min. DirectX 9 c I have so I do not understand the problem. I have Nvidia Gforce2 mx installed Gr.card so it should play without...?

  The game is C & C 3: Tiberium Wars

  Help, please!

  Hi ChrisNiven,

  1 Windows operating system you are using?

  2 have you tried to update the Nvidia drivers?

  Method 1:

  Check if there are problems with the DirectX installed on the system. Use DXdiag to troubleshoot all direct X related issues. DxDiag ("DirectX Diagnostics") is a diagnostic tool to test the features of DirectX and the problems of video material - or sound-related.

  For more information, you can consult the following article:

  Diagnosing basic problems with DirectX

  Method 2:

  You can also consult the following thread link and try the steps to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/command-and-conquer-on-a-Mac-with-Parallels-6-and/c737a45b-7c91-458A-AAC9-66bff80236d1

  You can see the following link support Nvidia to download the latest version of the drivers.

  NVIDIA driver downloads

  Hope this information is useful.

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support