Is there a switch to start minimized FF?

I'm looking for a command line switch that will start Firefox kept to a minimum.
Thunderbird too, if possible

It is not a command line for this argument, but there is a feature in windows that you can use.

Right-click on the shortcut you use to start Firefox, then select Properties. Go to the shortcut tab, about two-thirds to the bottom of this tab, it's a run, to change setting that Minimized.

Tags: Firefox

Similar Questions

  • Start error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found."

    Original title: run DLL error message

    When I start my computer, this error message box appears: run a DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found.  I tried to run malware byte scan Antivirus scans, security analysis of microsoft, microsoft's malicious software removal tool, scan, prevx, and nothing was found.  I'm not very well informed about computers, but this error box is annoying and I would like to quit smoking.  Thanks for your help.

    Hello MaureenCYB,

    Thank you for the question!

    I'm sorry to know that have problems you with the startup message. As I understand it, you get an error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found" when starting.

    I need to ask you a question to help you best.

    Were there any changes (hardware or software) to the computer before the show?

    To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: follow step 3 to reset the computer to start as usual after the boot process.

    Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

    Good day!

    Hope this information helps.

  • SE error message: "Run"DLL"there is a problem starting. C:\Users/John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll

    Get the below error message every time I start my computer:

    Run DLLS
    There was a problem starting
    C:\users\John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll
    The specified module could not be found.

    Hello cuefox, thank you very much to judge me.
    We're here to help.
    Continue to browse the web with Firefox, thanks once more.

  • Is there a switch Terminal to export/import a JSON FILE?

    I need to get and put the Firefox files in an external program, so I need to be able to export/import JSON files programmatically (probably the command line). Is there a switch that I can use, or another way to do this?

    You can do that via the command line.

    There is a daily backup of JSON in the bookmarkbackups folder in the Firefox profile folder

    Maybe you can create a component XPCOM to do what you want.
    http://developer.Mozilla.org/en/XPCOM
    http://KB.mozillazine.org/category:XPCOM_example_code

    http://forums.mozillazine.org/viewforum.php?f=27 - development of Mozilla's MozillaZine forum
    http://forums.mozillazine.org/viewforum.php?f=19 - development of MozillaZine extensions forum

  • HP27-k350xt:. On each startup, I get this message. "There was a problem starting C:\Users\bulldog2u\AppData.

    . On each startup, I get this message.

    "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

    Can someone tell me where to find this file?

    Thank you - BULLDOG2U

    BULLDOG2U wrote:

    . On each startup, I get this message.

    "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

    Can someone tell me where to find this file?

    Thank you - BULLDOG2U

    You don't want in this file.  Ads by Call Builder is malware that opens the ads on your computer.  If you encounter this error, then it is likely that you have an antivirus/antimalware program which was removed from your computer, but left the startup item.  More information on Call Builder, and how to remove can be found here.

    To remove this item from your startup list, follow these steps:

    System (Windows 7) Configuration utility

    1. In the start search box, type MSCONFIG and press ENTER.
    2. Click the Startup tab.
    3. Uncheck the items you want to run at startup.
    4. When you have finished your selections, click OK.
    5. In the box that appears, click on restart to restart your computer.

  • Lenovo X 230, CustomEventMonitor.dll 'there is a problem starting'

    Dear Sirs,

    Just after the connection of Win10, I begin to get this error message. How to solve this problem?

    'There is a problem starting'

    and right under "is not a valid Win32 application".

    Here's what it looks like - error

    The answers will go,

    Thank you


  • There was a problem starting APISupport.dll. How can I solve this problem

    I get this error message everytime I turn on the laptop.  "There was a problem starting APISupport.dll.  The computer works fine, so I need this module and if I do not how I get rid of this error message.

    This might help:

    http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/there-was-a-problem-starting-crickapp/8e3a6c8c-7842-454F-8dc7-bba667e8f9c2

  • I get an error message, "there is a problem starting C:Users\ (my name!) \Appdata\local\temp\uacavi,dll ".

    Hello

    whenever I start my pc, I get this error message:

    There is a problem starting C:Users\ (my name!) \Appdata\local\temp\uacavi,dll

    I recently purchased RegCure Pro for fix my registry and its still not fixig the problem.

    Help, please

    Original title error message.

    Thank you

    Well, you shouldn't have wasted your money on a registry cleaner - they are dangerous to use if you don't know what exactly is the cleaning of your registry - and if it is safe to remove the discovered or not registry keys.

    OK, so just fix it-

    Press Windows key + R > type msconfig in the box run > Enter. In the System Configuration window, select the Startup tab.

    Now, uncheck an entry > OK and restart. If the error message is gone, leave it as it is. If the error message still appears, open System Configuration > start again tab. Now check the entry you previously unchecked and uncheck another. You do this to know what entry causes the error.

    Make work easier, you should not try unchecking and check all entries beginning with the following words in their names.

    Microsoft, Adobe, Intel, (your company produces antivirus developer), Java, Synaptics and (the manufacturer of your computer - HP, Dell, Sony, MSI or anything else).

  • An error keeps coming back that there is a problem starting werconcpl.dll - the specified module could not be found. What should I do?

    An error keeps coming back that there is a problem starting werconcpl.dll - the specified module could not be found.  What should I do?

    Hello

    ·         Since when are you facing this problem?

    ·         Were there recent changes made on the computer before the show?

    Follow these methods and check if that helps:

    Method 1:

    This file is a Microsoft Windows System. If you receive the warning on the file, I suggest you to run the latest Microsoft security on your computer Scanner and check if that helps:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Method 2: Run scan files (SFC) system auditor

    It will scan your computer to check the integrity of files on your system.

    The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

    SFC follow the steps in the article to run a scan:

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • Error there is a problem starting windows C:\windows\system32\spool\drivers\x64\3\ssnetmon.d64, when you try to open a session

    Original title: ssnetmon.d64 - error message when you connect

    When I log in, I get the following message.
    The message is as follows and appears three times:
    There was a problem starting windows
    C:\windows\system32\spool\drivers\x64\3\ssnetmon. D64

    I use Windows Vista Ultimate 64 bit

    Thank you for your response.

    The problem was due to the Seagull printer driver installation. I just reintalled driver to fix it.
  • My computer has a black screen and a cursor and there is no menu start more

    Original title: replay Vista operating system

    What I would like to know, is my computer only has a black screen and a cursor, there is no menu start, so I can stop and start a new installation of windows vista? If anyone can help please. I thank you very much for your time and have a fantastic day. Shawn

    Hello

    What changes have been made on your machine for there to be a black screen with a cursor?

    Rather than doing a clean install of your operating system, I suggest you do the following.

    Step 1:

    Remove all external devices (printer, USB flash drive), as appropriate, and start your computer again and check.

    Step 2:

    If this is little help, start your machine in safe mode and check if it starts on the desktop.

    Let us know the status of the issue.

    Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • "RunDLL -" there was a problem starting C:\Program the specified module could not be found. "

    Hi all

    I get this error with a new computer at startup.  I have not the least of which may be the cause of it.  Please notify.

    Error box
    RunDLL

    Error message:
    There was a problem starting C:\Program
    The specified module could not be found.

    I have solved my problem.  This was caused by an outdated piece and integrated by Lenovo - Lenovo Power Manager software.  I've updated to the latest version, restarted, and the question is more persistent.  It has been resolved.

  • Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found.

    While from my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.

    RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.

    I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.

    I tried then access these locked directories showing locked and have encountered the error

    C:\Users\ (X) 'X' is not accessible, access is denied.

    I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.

    AND yet once I met the other mistake

    Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.

    So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment...  :-)

    Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.

    ........ Content of the lead in double...

    I already posted this Question under Security, issues of privacy and also accounts, but it seems that the error also happens with IE explore 11. The error comes back constantly, but more often in the browser.

    Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found. Well that begins my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.

    RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.

    I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.

    I tried then access these locked directories showing locked and have encountered the error

    C:\Users\ (X) 'X' is not accessible, access is denied.

    I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.

    AND yet once I met the other mistake

    Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.

    So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment...  :-)

    Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.

    Hi Barry,.

    Sorry for the late reply.

    The Internet Explorer cannot be uninstalled. However you can disable/enable what works as the resettlement.

    How to repair or reinstall Internet Explorer in Windows

    https://support.Microsoft.com/en-us/KB/318378?WA=wsignin1.0

    Keep us informed on the issue.

  • There was a problem starting C:\progra~\common~\system\Sysmenu.dll. Specified module Couldnot be found.

    Original title: a pop-up window.

    I have three questions.

    First, is there a way to do a refresh or low level format in Windows 7, as it is in Windows 8?

    Secondly, I am running Windows 7 Ultimate, Intel Core i7 860, Biostar a 85 W CPU, 32 GB, 240 GB SSD, 1 terabyte storage SATA disk drive, and and anAMD A10 5800 K - 8 p-2 with a backup card video AMD Radeon HD 6670. Question is that when I run Speccy, Bell, or CPU - Z arc, it shows only 2 hearts working. Is there a way to turn the hearts of all who I missed, or they do not open as software requires?

    Thirdly, recently I started to get this message. I see him two times:

    There was a problem starting C:\progra~\common~\system\Sysmenu.dll. Specific module Couldnot find.  

    I've used windows repair just before installation, my repair disc I created when I put to the top of the machine, ran Reimage, producer of energy, ran Malwarebytes pro and Avast Pro to find the malware or virus, System Restore used to back at a time well before the problem presented itself, cleaned everything off start Ms config looking for abnormal and any processes that I could think of. But the problem remains. I think I watched it so long my brain wanted to mush. Help!  Mike Stone

    E-mail address is removed from the privacy *.

    We Fri, 5 September 2014 20:11:29 + 0000, MikeStonesx wrote:

    I have three questions.

    First, is there a way to do a refresh or low level format in Windows 7, as it is in Windows 8?

    See JW Stuart's response to you.

    Also note that a format of low-lever has noting to do with any version of
    Windows. It's a hardware problem, not a a Windows. And it must never
    be done on any modern hard drive; It would destroy the disc.

  • There was a problem starting \AppData\Local\PLATYTO~1\Updater.dll C:\Users\ (snip). The specified module could not be found.

    RunDLL

    There was a problem starting

    \AppData\Local\PLATYTO~1\Updater.dll C:\Users\ (snip)

    The specified module could not be found.

    Original title: that means the attached error message, how will this affect my use of the computer, and how to fix it?  Thank you, C

    This arose before a few times.

    See if http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/keep-receiving-a-run-dll-error-for/f89fa5d1-fd0d-42b9-b72c-b47a38d57ed2 help.

    It can be useful also running a full anti-virus update. In addition, download install update and run a scan complete with free malwarebytes (keep it free, no need to trial etc.) as a check of the backup.

Maybe you are looking for

  • Can I upgrade Cougar 10.8.4 El AK

    I currently have an iMac 2013 end with 8 GB of ram. Can I switch to the last El Capitan... and where I could find These procedures to do so. Thnaks. RM/Austin, Tx

  • No fax Pentecost photosmart c309a

    I apologize for any English language writer. Hello to all, Ho no problema: mi non è più possibile, dopo the ultimo aggiornamento here da HP, the e per the Telec pleasure. Precedentemente, tutto Spannplatte correctly. Currently, e use Windows 7 Pro Xp

  • laptop does not recognize the cd/dvd drive

    I am trying to play a dvd, but my D drive seems to have disappeared from my laptop. How can I get that back.

  • Desktop computer does not pick up my second monitor

    Hello I just bought a HP Pavilion Slimline s5 desktop PC - 1400t and trying to connect 2 HP w2338h monitor in my office.  For some reason the only reading office is a monitor and not the other.  I am currently using a USB-Powered VGA 2 ports splitter

  • LFO

    Hello I would like to know the use of the LFO connector? This connector is present on the motherboard of my H8-1020. Thank you