Is there a way to delete and does not host (death) of the inventory?

Similar Questions

• Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

  Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

  To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

  That's what * I * would call cleaning and optimization of a Windows XP machine:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• How can I download the drivers for a processor that crashed and does not have access to the internet

  How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

  How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

  First of all, please note that you mean a computer, not a cpu.  "CPU" means "Central processing unit". In modern personal computers, the CPU is a relatively small chip, an integrated circuit. It is located on the motherboard inside the computer case. It is not the case itself, nor is it the total computer, which includes the case and what it contains.

  Download drivers on another computer and put them on CD or thumb. Bring them to the computer in question, and then copy them there.

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

  Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

  Hi TG24.

  Acrobat Reader 16.09.21 is now available in the App Store.

  It should solve the performance problem that you are experiencing.

  We apologize for the inconvenience.

• Laptop frequently is off and does not restart even when the Start button / stop is held in

  I have a notebook dv7-3060us running Windows 7, some mornings (every few days or weeks), I find, powered out and does not.  In press and hold the power button for 5-10 seconds has no effect.  I have to unplug and remove the battery to restart.  What happened several times.  I tried it with the battery removed, and it fails again, then.

  A software problem can cause this?  I thought that holding the power button causes a material interruption and the BIOS takes over.

  Is there a known hardware problem which can cause this?

  Thank you

  Adam

  Hi Sean,.

  Thanks for the suggestion.  Unfortunately, the steps listed for a hard reset was precisely what was needed to market every day.  So, we did about 50 times.  The real issue was whether a software problem could cause the phone to require a hard reset every time.

  After not getting no response for a few weeks, I have restored your computer from a backup, I made after the update in the first place and then re-set everything.  So far, it has remained stable, which brings me to the conclusion that it is, in fact, a software issue.

  Kind regards

  Adam

• accidentally deleted my video library of its location. How do I recover and does not lose everything in the folder?

  When I try to view my videos I get a {"Videos.library - ms" are no longer working., this library can be removed safely from your computer.} Records that have been added will not suffer.} Message.

  I looked on the web and everywhere I look it says to remove the folder videos and restoration, but "Note:removal of a library does not delete the contents of the included folders.» "However, you need to add or include your folders manually, if necessary." I don't want to lose anything that is not in a folder.  There is way to much to lose...

  Help, please!

  Right-click the video library (the one with the blue icon) and choose Remove.  It will not erase all files.

  Then right click on the word 'Libraries' and choose 'Restore default libraries'

  And don't worry - even if you make a mistake and you delete the wrong thing, you can recover from the Recycle Bin on your desktop, that's why he's here :)

• Is there a way to backup and restore vista layout icon on the desktop?

  Is there a way to save & restore the Windows Vista desktop icons without having to download anything?  Windows has a 'solution' to download I don't know?  Thanks, gator gal

  Hi t-4-2, just wanted you to know that I had my friends icons all back.  She had inadvertently put them in another folder in the office when she tried to pull them to where she wanted.  His vision is not what it was, so it makes it extremely interesting when she tries to deal with the computer.  The magnifying glass that she uses with her mouse helps a little.  In any case, it is almost crossed your fingers when she uses her PC.  Icons disappear, the printer mysteriously stopped working.  I just try to keep its games where she can find them, as well as its image file.  Thanks for your help.  Very much appreciated.

• Satellite L500: WLan is de-energized and does not work most of the time

  Hi all, I have a satellite toshiba L500 running windows 7. iprimus have used wireless internet, no problem for a few weeks before that, used it via an ethernet cable as I didnth ave a wireless modem. my phone was off load the other night and went flat, next morning when I woke up and turned on, it wouldnrt to connect to internet after hours and hours of phone calls, iprimus and many resets winsock, ethernet and modem reset cable tests they tell me that the problem is in my laptop...

  So I rang toshiba... and they got forced to go in device drivers, cards, and then network and disable, actually uninstall the wireless drivers and then reinstall... and it worked... Finally... (forgot to add with the confusion iprimus someone had reset my passowrd and I had to configure to the laptop...)

  Anyway, after all of these calls, I did a full restore of the computer laptop, all deleted and reinstalled everything and then reinstall the modem. This time in the configuration of the modem, he told me the wireless network adapter was unplugged and let me only implemented via ethernet...

  now earlier today, I had the internet... but he dropped randomly... pages Web will go slow, sometimes it will reconnect, sometimes he used. now I thougbht could try and uninstall and reinstall the modem again, s soul mistake and this time, can not get the wireless at all.

  Ive google to see if others have had this problem... and seeing what others has written, I went into my battery settings and checked the WLAN will not in mode 'sleep', etc., and ive also checked everythings active. Ive no idea what do, or iprimus and Toshiba will give me answers, both companies are just to blame each other lol
  so I have
  It doesn't seem to be my laptop, as all the lights are on modem... and iprimus keep telling me its not record not not with them (disconnects) so my wireless. Although every time my laptop has left internet, so would my iphone of bfs were testing us and so did my other laptop which is partially drunk but couldn't normally always connect to the net... so as to tell me it is a problem of modem... Ive no idea what to do... and can not keep it via ethernet on the bench in the new House ive, as with 2 children less than 3 years moved in, is asking for trouble...

  someone at - it suggestions?
  Thanks in advance
  :)

  > my phone was off load the other night and went flat, next morning when I woke up and turned on, it wouldnrt to connect to internet after hours and hours of phone calls, iprimus and many resets winsock, ethernet and modem reset cable tests they tell me that the problem is in my laptop...

  That s the best way to get rid of a client who has a problem, I know that those people who don't say, this is not my problem it problem computer laptop s ;)
  I think that the guys running out of ideas.

  However, first try an update of the WLan driver;
  NEST WLan driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  If new BIOS BIOS update would be available.
  You should also check the advanced settings of the wireless network card.
  To do this, go to Device Manager-> properties-> Advanced tab WLan card.

  Here you can choose some settings that would improve performance

  Good luck

• OME does not receive details of the inventory and the State for some devices

  OME does not receive the details of the inventory and the State for some servers.

  For example when looking at one of our PowerEdge R620s is all that presents itself:

  

  iDRAC firmware and LCC is updated (version 2.21.21.21 is installed.)

  I reset the iDRAC, and that did not help.  I have no problem with most of the other R620s in the same range of discovery.

  I deleted the object to OME and re-discovered twice over the past week it but did not help.

  Things seem ok when I use the troubleshooting tool:

  

  Anyone has any info on what may be going on here or how to fix this?

  Thank you

  Hello

  Thanks for the details in the post.

  Wanted to check what version of OME use you - OME 2.1?

  If so, this behavior with ws - man discovery could potentially due to expiry of certificate on this device. You can launch the iDRAC user interface and confirm the certificate information.

  2.1 the OME, the WS - Man communication component is updated. The most recent component does not communicate with the device if that device has been exceeded in the certificate.

  Sslresetcfg running via racadm will reset the certificate. For details and solution, see same threadhttp://en.community.dell.com/techcenter/systems-management/f/4494/t/19653767 .

  Let us know if that helps.

  Thank you
  Vijay

• Windows Vista clocks works slowly and does not reset correctly when the computer is restarted.

  I can reset the clock via the server of internet time and after about an hour, he begins to lose time.  When you restart the laptop, the clock is not properly reset the CMOS.  I don't think I have battery problems since the clock loses time if connected to power or not.

  Thanks for the reply David.  I'm not sure that replacing the CMOS battery in a laptop is simple.  I'd appreciate an information change in a notebook Acer Aspire.

  Here is the link:

  How do I replace the CMOS battery in an Acer laptop
  http://www.ehow.com/how_4882009_replace-CMOS-battery-Acer-laptop.html

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Standard PO does not by default under the inventory in the Distributions

  I cannot by default under the inventory when creating PO Standard in R12.0.6.
  
  When you set sous-inventaire, I chose the Type of Sourcing as the inventory and selected organization with my Org of the inventory and the inventory of Sub desired. But this configuration is not get in. because of that when I order autocreate created in iproc in PO to buy, I have to manually select the subinventory. Is this something that can be controlled at the level of the workflow?

  Hello

  You set up profile options ' POR: preferences - select the default items to the inventory ' Yes.

  Knick

• When I try and open my dock on my mac lightroom it is sitting there with just panoramic image and does not open. How to open?

  How can I get lightroom open when it's right there with the panoramic view and color wheel?

  Hi teresas,.

  Please try and reset back to the default Lightroom preferences.

  

  Let us know the results.

  Kind regards

  Mohit

• Mail is active and does not allow me to the closure or the journal of the computer unless I log on Messaging. I was not able to do.

  Air Mac OS El Capitan memory of 4 GB, 256 GB of storage, 1.6 GHz Intel Core i5

  When I try to disconnect from one account to another, or when I try to stop, I get a message "Mail" interrupted logout. To continue a disconnect, quit "Mail". I was not able to do. I went into system preferences; iCloud; uncontrolled mail but Mail remains active. I can't find another way to stop mail. Mail "quit" is grayed out.

  Force an application to close on your Mac - Apple Support

• for three days, I am unable to log on my user account who is the administrator. I tried my usual password and does not work. However, the other two users accounts are still functional.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/default.aspx/KB/940765/en-us

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  Try the information above for this problem, as you know the password.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner