Is there a way to make the search of texts in the database?

Similar Questions

• Is there a way to make the character will blink or squint with one eye?

  Hi all!

  Is there a way to make the character will blink or squint with one eye? For example, in the 'Customize-> head' - Section only, I can customize some points on both eyes at the same time, but I have not found a way to make the character 'close' one eye so that it looks as if it is kind of flashing. It is even possible to do it with fuse... or IM just in the wrong place?

  Thanks in advance!

  Fabian Hey!  Fuse face expressions are more than one aspect of this face when you ask 'preview' it have rather intended for the laying of the real face.  We generally recommend leaving the fuse facial expressions and make laying in Photoshop, once you get there!  Here is a screenshot showing where you can access controls of the face in Photoshop.  That being said - I didn't "think that we have a unilateral wink or blink in fuse or Photoshop at the moment.  Might be interesting to post an idea in the forum of ideas for "better facial posing?"

  1. Select the 3D layer in the layers panel
  2. Select the skeleton of the character in the 3D Panel
  3. In the properties of the Panel change to the tab 'face '.
  4. Select an expression of search results
  5. Adjust the expression using the sliders and the offsets

  

• Is there a way to make the safari opens a new page every time?

  Hello

  I'm kinda new here and I would like to ask a question. I now use an iPhone as a primary device, instead of Android. But is there a way to make the safari to remove all tabs when you close, and when you open it, it just opened a new page or a blank page? My phone is just laying around sometimes and I let my friends to use. But when I close safari after I order something or when I'm checking my bank account, they can all see when they open up safari...

  All I can think is to close all tabs before close Safari, or use it in private Mode:

  Enable or disable the navigation on your iPhone, iPad or iPod touch - Apple Support

• Is there a way to make the LPT1 port EPP in Windows?

  Original title: is there a way to make the LPT1 port EPP in Windows?

  I have some parallel setting in BIOS for EPP is selected. Device Manager he calls an ECP port. The device requires PPE runs correctly. Is there a way to make the LPT1 port EPP in Windows?

  Hi RonaldEchols,

  ·         What is the model number of the device (printer)?

  ·         You use what version of BIOS (Basic Input Output System) and the motherboard?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Is there a way to make the vector lines (Path) more Visible in Photoshop CC on OSX?

  Is there a way to make the vector lines (Path) more Visible in Photoshop CC on OSX? Just passed from the CS6 in the CC, and it is very difficult to see when they are in fact seen visible.

  Apart from excellent advice from Terri, there is no way to really change how the paths appear - nevermind, I could use those more visible as well.

• Was there a way to make the keyboard custom default mapping?

  Was there a way to make the keyboard custom default mapping?

  I mean, it is, for example, I want to disable < command > S for the record (so I don't accidentally hit him).

  Thank you!

  Hugh

  Edition > keyboard shortcuts make changes to shortcuts and save under a new name. In the drop-down list at the top choose your new set and firm. Exit and restart to seal the deal.

• Is there a way to make the NAS200 act as a drive in my computer

  Not sure if this has been discussed here yet.

  I have a NAS200 connected to my router and I can access through my web browser without problem.

  I was wondering if there is a way to make it act as a player that is in my computer. It is to say give it a drive letter and do appear in "my computer".

  I'm under win 8 pro desktop hard wired to the router with the nas200 connected. Is there a way to "climb" the nas200 as drive on the computer.

  Thank you

  Bob

  Yes, you just need to map the drive on your computer. You must ensure that the network drive is detected in the first network. You can click on the following link to find out how to map the drive:

  How to create a shortcut to map a network drive

• Is there a way to make the shortcuts for Internet Protocol Version 4?

  Hello

  I have the Internet Protocol V4 settings:

  IP address: 192.168.0.101

  Subnet mask: 255.255.255.0

  Default gateway: 192.168.0.1

  Preferred DNS server: 192.168.0.1

  I want to know if there is some way to make the shortcut for these settings so I can click on this shortcut when I want to configure the Internet Protocol V4?

  Thank you

  Rami,

  Yes, you can do what you want.  See this forum is different for different networks available static IP thread and the thread of TechNet that it links to is it possible to assign a static for each TechNet netowrk IP address

  Once you configure the properties they should stay that way so please can you explain why you want to be able to keep these values reset?

  Denis

• Is there a way to make the preview audio whenyou hold Control and then drag the handle to default time?

  Hello

  Is there a way to make sure that the audio preview what happens when you place the control as you drag the handle of the current-time indicator is the default, so that you don't have to hold control whenever you drag it? He came to where I cling control whenever I drag this handle, so it would be actually very convenient to be able to do the audio preview by default instead of requiring the holding down of the control. I looked in the options, but if it's there I must have missed it.

  Thank you

  N °

  You can submit requests for features here:

  http://www.Adobe.com/go/wish

• Is there a way to make the biggest search engine in light horizontally

  I tried enlarge the window horizontally spotlight search but cannot find how to make the post only that I can find is said to use the 'ALT' key and must make greater two-way light. This does not work for me.

  N ° of boring, isn't?

  Leave your comments here:

  http://www.Apple.com/feedback/

  C.

• Is there a way to make the results of the search bar appear in a new tab (and not in the current tab)?

  I'm new to Firefox, but experience a great improvement on IE. I find it heavy to have to open a new front tab - I use the search bar... I would largely prefer a similar option to 'search results appear in a new tab.

  Thanks for the help!

  Edit: I found it.

  This preference can be changed by typing about: config

  (1) type or paste Subject: config in the address bar and press enter (click the button promising to be careful and please be careful!)

  (2) in the filter box, type or paste the Search and pause until the preferences are filtered

  (3) double-click browser.search.openintab to change for real. You're done, you can close all: config now.

  -Previous text-

  You are a person of keyboard or mouse?

  Using the keyboard after you type your query, hold down the Alt key while pressing ENTER to open search results in a new tab. This also works in the address bar: when you type the name of a new site, hold the Alt key when you press ENTER to open this site in a new tab.

  Using the mouse, hold down the CTRL key while clicking on the magnifying glass icon.

  Is there a way to always open in a new tab without having search results to use the Alt or Ctrl key? Hmmm, perhaps, I have not studied that.

• Is there a way to make the snap windows volume mixer all volume of requests to match the main volume?

  I noticed that windows likes to change my settings of volume for some applications, probably in an effort to help me, but it seems to create more problems than it prevents. For example, when I start a game, my itunes volume is lowered. The way I calculate it, this often leads to a variety of different volume levels for different applications after awhile, and if I turn up the volume with my volume key (which increases the overall volume) they only rise proportionally. So if the volume of Chrome is 50% and iTunes' volume is 10% and I increase the volume to maximum, iTunes volume only goes up to 20%, forcing me to manually open the mixer volume and level everything. I noticed the overall volume take a gray line in the whole of the mixer, is there a way to force all applications to align on this gray line and does not move unless I change myself in the mixer? Uncheck everything in the volume control options didn't fix it.

  Thank you.

  The way I did earlier was to move all the sliders up to 100% (look at your ears, however, if you have headphones on - the "bong" sound system is going to be quite noisy!).  After that I did, all volume settings have been aligned on the line grey and synchronized with the master volume.

• When you print a picture, it comes out darker I want. Is there a way to make the lightest photo?

  I reworked an old photograph, remove cracks in the original. However, when I print a photo on photo paper, the photo comes out darker I want. is it possible that I can do the lighter photo so what impression it improves?

  original title: make the lighter painted image

  Hello
   
  (1) what version of windows are you using?
  (2) lighter photo and print the photo what software do you use?
  (3) have what tool/application you used to remove the cracks?
   
  See the steps mentioned below and check if that helps.
   
  Method 1:
  Adjust the brightness and contrast of an image
  http://Windows.Microsoft.com/en-us/Windows-Vista/adjust-the-brightness-and-contrast-in-a-picture
  Note: The above link applies to Windows Vista.
   
  Method 2:
  How to edit pictures?
  http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-edit-photos-FAQ
   
  Method 3:
  Windows Live Essentials: Photo Gallery
  http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-get-started
  Hope this information helps

• is there a way to make the icons remain in the same places and not move when I turned off and restart my desktop computer? I like to keep the icons where I put them.

  I do a lot of important writing, and it would be so much nicer if the icons of file would be left in the same positions on the desktop, so that when I started working I don't panic, thinking that some kind an important file has been lost. Please help me understand how to set up my office to keep my icons in place, if possible. Thank you!

  Make sure the settings are as the other poster said.

  This could happen if the Explorer doesn't correctly. The positions of icons are saved at the stop.

  As an experience shutdown shut down Windows Explorer.

  • Create and position a file on the desktop.
  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab see if Explorer is displayed.
   
  Then to restart Explorer
  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

  Is your file in the correct position?

  General Explorer Fixs

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects the control panel press Windows key + R and type wercon.

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
   
  Then to restart the Explorer after trying all of the following
  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer
  Reregister the shell registry entries
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll

  regsvr32 vbscript.dll

  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx

  regsvr32 wshcon.dll

  regsvr32 scrrun.dll

  Delete folder settings
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
   
  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

   

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
   
  Delete the thumbnail and icon Caches
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

   

  del "% userprofile%\AppData\Local\IconCache.db".

   

  del "% userprofile%\AppData\Local\*.db".

   
  A boot is a way to explore
   
  It can be caused by a shell extension.
   
  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
   
  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  and if it helps, re-enable one by one to identify the who.

• Question 1: Is there some sort of privilege get admin and the State of return permanently? Question 2: Is there a way to make the disk drive C E?

  Problem 1: Window 7 and I have fought each other and Windows 7 is to win. I am the owner, administrator and only users of my computer 7 Professional and I can't do anything that requires an admin and most of the time it excludes me everything to do. I need to use this computer, so before you take a hammer, is it possible to give me permanent permission to admin? I do too many things that require admin to play with the standard user. I have a Windows 7 Professional, Internet Explorer 9, and Google Chrome, drive C has about 120GB and 1 TB E. I don't know why the people that set up this computer for me did it but now I have to fix, because drive C is on the point of falling.

  Problem 2: My C drive was never large enough to handle what I need, the E drive but how to switch the two? I tried the file transfer and some work and some have just done battle with Windows 7 worse and more complicated. Now the system is all messed up. It will not save, it wont recover, it does not work most things because the C drive is full and no matter how many things I delete or remove the C and put on E drive C never goes back down. I am a student adult and I guess I know just enough to be dangerous, but not enough to make a difference but how am I supposed to learn if I don't try?

  Unfortunately, your two statements are incompatible:

  • Now the system is all messed up. I tried to correct things, but there are still so many problems.
  • I really want to start from scratch.

  Your chances of fixing your problems are close to zero.
  The chances of an expert of your fixing problems are slightly higher, but only if let you it sit in the front of your machine and give him lots of hours trying different things.
  Since you seem to be dependent on a work machine, you must consider the following approach:
  1. Back up your data.
  2. Check your backup on another computer so that it is accessible.
  3. Perform a destructive factory restore.
  4. Reload your software.
  5. Create an image of your installation and store it on an external support.
  6. Check if the image is usable.
  7. Wait until the dust has settled (two to four weeks), and then create another image.
  8. Create a new image, once every six months.
  9. Always keep two more recent images.

  Many people skip the stages 2, 5, 6, 7, 8 and 9. Are absolutely essential for a robust installation that needs a quick recovery path. Skip the following steps allows you to save a bit of time at the start but cause a lot of grief later.