Is there a way to SHORTEN the time of compilation

Similar Questions

• Is there a way to make the time with RX 10?

  Are there options or remote controls on the horizon that would allow the RX 10 to shoot gaps of time?

  Frances: with all due respect, it's the kind of frustrating non-response that is very typical of the support on these forums.

  I don't know about the RM-VPR1 remote and I know (and I hope you do too) that it does not support the timelapse or any intervalometer function.  Then why you include it in a 'response' if it has nothing to do with the question?

  Because what you're saying is, indeed, that "no, there is currently no way to get time with the RX 10 differences." It would be a much more simple and honest answer.

  Moreover, I do not accept this answer as a solution, just to be clear. Another one of my unanswered questions was marked in this way and not by me. A little straight talk would go a long way here.

• Is there a way to check the time since the last charge on the original Surface Pro?

  I am trying to understand what kind of battery life, I get on my Pro Surface. I would like to know how long it is sustainable, given that the last full fresh as well as what is using power. If you have an Android phone, if you look at the information about the battery, it is a little info that I'm looking. If the window does not that natively, can anyone recommend a good app? Thank you for your help.

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Your Surface uses an internal lithium-ion battery designed to go wherever you go. The duration of your battery lasts varies according to the kind of things you do with your Surface.

  Please refer to the article for more information:

  Surface RT and 2 surface of the battery and the power

  You can also check: power plans: frequently asked questions

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Shorten the time allotted after the start

  Is there a way to shorten the period of time once welcomed period starts?

  Hello

  The time limit set in the Parental control is not editable once the time has begun. Log in with the administrator account and change the time runs out, when the time is unlocked.

• When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  Hi kevin7frg,

  You can go to "file > create > scanner > configure presets PDF»

  The dialog box that appears, you can choose 8.5 X 11 as the default width and height of PDF pages to scan.

  

  Hope that helps.

  Kind regards

  Ana Maria

• Is there a way to control the color (or other properties) of several layers of text at a time?

  A frequent case when you design a Web page:

  I create text elements/blocks and each a title, body, etc...

  each title is a separate text layer and I use the actual content (so no lorem ipsum)

  Is there a way to set the color of the text as separate dynamic object or kind of style? So when I want to try other color I would be able to change it in one place and it applies to all linked text layers that use it...

  Dynamic objects using works fine for repeated identical items, but not when the elements are different as these texts...

  The library using CC allows you to set the style that can be applied again to several objects, but in the case of a PSD file complex with a long list of records and layers, it is very difficult and a lot of time to select all the layers desired by hand and apply them the style you want...

  In the end, I'm looking for a clear way to define a style sheet: fonts, colors, attack, variants, etc. as distinct kind of "smart objects"...

  Is this achievable in Photoshop?

  Create a solid color fill adjustment layer and turn it into a smart object. This duplicate SO using ctrl/cmd-J and hang it on all the text layers you want color. You can then open the SO and change the color and it will be applied to all the text layers that this particular SO is cut to.

• Is there a way to change the duration of a group of clips selected at the same time?

  Hi all

  I work with the good old first 6 on Windows 7.

  Is there a way to change the duration of a group of clips selected at the same time?  If I have a large group of items my editing which are all the same length, once I chose them all in a group, can I change somehow the term chassis number from all the clips at the same time?

  I found other things that can be done to a group of clips at the same time, but I can't find a way to change the duration of a group of selected items.

  Thank you

  Digi

  This feature did not show up to CS5.  With any version prior to that, you can them one at a time.

• Is there an easy way to calculate the time difference?

  I am trying to find a way to calculate the time difference between

  here at a certain time

  var settime:Number = 02:35

  and

  now would be getDate();

  I tried something rediculus, but it does not work when I entered a date less than 24 hours, is there a class out there who can just this kind of things

  or y at - it something on the internet that could tell me the difference between different time

  Thank you

  My attempt

  var date: Date = new Date();

  Set timer to what would I like to call the function
  var lastcallH:Number = 22;
  var lastcallM:Number = 50;
  var lastcallS:Number = 0;

  Set up of the 24-hour clock
  var tHour:Number = 24;
  var tMinute:Number = 60;
  var tSecond:Number = 60;

  Get the current time
  var cHour:Number = date.getHours ();
  var cMinutes:Number = date.getMinutes ();
  var cSeconds:Number = date.getSeconds ();

  Set the first variable
  var fH:Number;
  var fM:Number;
  var fS: Number;

  A second set of Variable
  var sH: number;
  var sM:Number;
  var sS:Number;

  Final conversion for the Timer
  var finalMil:Number;

  Time variables that will need to be converted

  If (lastcallH < Thur)
  {
  fH = chorus - Thur;
  fM = cMinutes - tMinute;
  fS = cSeconds - tSecond.
  finalMil = (sH * 60) + (sM * 60) + (sM * 60);
  }
  ElseIf (cMinutes > 0 | cSeconds > 0) {}
  ++ Choir;
  ++ cMinutes;
  fH = chorus - Thur;
  fM = cMinutes - tMinute;
  fS = cSeconds - tSecond.
  }
  else {}
  fH = chorus - Thur;
  fM = cMinutes - tMinute;
  fS = cSeconds - tSecond.
  }

  sH = fH + lastcallH;
  sM = fM + lastcallM;
  sS = fS + lastcallM;

  If (< 0 sH: sM < 0 | sS < 0)
  {
  sH = sH * (-1);
  sM = sM * (-1);
  sS = sS * (-1);
  }
  finalMil = (sH * 60) + (sM * 60) + (sM * 60);

  Allows you to implement a timer
  var yahooTime:Timer = new Timer (finalMil, repeat);
  var repeat: Number = 1;

  yahooTime.start ();

  yahooTime.addEventListener (TimerEvent.TIMER, displayCall);

  function displayCall(event:TimerEvent):void
  {
  trace ("well let's success");
  }

  your first trace() statement is almost certainly not what you want.

  dtDate2 is 08/08/2009

  and it's probably not what you want.  Flash months are zero-based.  That is to say, January corresponding to month 0 and December is the month 11.

• Is there a way to make the safari opens a new page every time?

  Hello

  I'm kinda new here and I would like to ask a question. I now use an iPhone as a primary device, instead of Android. But is there a way to make the safari to remove all tabs when you close, and when you open it, it just opened a new page or a blank page? My phone is just laying around sometimes and I let my friends to use. But when I close safari after I order something or when I'm checking my bank account, they can all see when they open up safari...

  All I can think is to close all tabs before close Safari, or use it in private Mode:

  Enable or disable the navigation on your iPhone, iPad or iPod touch - Apple Support

• Time Machine - there was an error preparing the Time Machine backup drive (could not mount the drive)

  I have a new HD but cannot set up encryption with system preferences. After ten minutes, I get the following error message:

  "There was an error preparing the Time Machine backup disk (disc name) - could not mount drive"

  Apparently, I need to set up the HD in this way:

  • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT)

  It is not an option for the HFS + and so I used; OS x EXTENDED (journaled). GUID is ok.

  Can someone let me know what I need to do.

  Thank you

  Formatting: GUID Partition Table, OS X Extended (journaled).    (it is HFS +)

  For TimeMachine at best to a partition only.

  Do it again if necessary, then disconnect, reconnect, Start Time Machine preferences and "select disk".

• Is there a way to stop the "free songs" Apple throwing up in your library?

  Brief description:

  I don't want songs added to my library or a list of "bought songs" unless I personally put there.

  Long description:

  For a period of time (at least 4 months) decent, my iPad and iPhone absolutely refuse to play the last thing I listened to when I start my vehicle with my iPad at hand. It is usually Audible, but sometimes his podcasts (podcast app Apple) or music. What it does, is blowing some of the garbage on my list of "bought" without asking me even. Not my library, or something already on my iPad, but something to download. As an adult with the musical preferences well developed and understood, I know what I like and I really know what I hate. And I hate a minimum of 90% of the waste that they throw in my library.

  I found the option in the application to do 'all' not on my device inaccessible, but this is only a partial solution. Of course, it gets rid of 50 songs that apple has sprayed all over my face, but it makes my other inaccessible 10 000. I go through the hassle to delete songs from my shopping list, but there is a never ending stream that keeps have emptied some toilet somewhere and ends up on top of my devices.

  Is there a method to prevent the undesirable elements to be injected in MY music library?

  On a side note, yes I've tried everything from several Web sites and forums for my devices play the last thing they were playing just 2 hours ago. Nothing has worked. And I'm not ready to whipe just my devices for this particular nuisance. If I can stop the garbage play, I'll be happy with others.

  Thank you for your constructive comments!

  Respectfully,.

  N

  Is there a way to stop the "free songs" Apple throwing up in your library?

  Because it doesn't, there is nothing to stop.

  Summary: I don't want songs added to my library or a list of "bought songs" unless I personally put there.

  Long description: For a period of time (at least 4 months) decent, my iPad and iPhone absolutely refuse to play the last thing I listened to when I start my vehicle with my iPad at hand.

  ???
  ' Your 'brief description' and the long description ' does not relate in any way at all.

  The shopping list is what you bought (or free) in iTunes.

  The elements go after buy you them. It is the only way to add. They maybe o may not be on your computer, depending on whether you downloaded them or not.

• Is there a way to disable the highlight D + tone priority put after the picture is taken?

  Hello

  I am using the multiple exposure settings to take a period of time of a tree using the overlay effect. Unfortunately, the first photo that I took of the series chose the HTR d +. When this field is selected, you can use the multiple exposure settings.

  Is there a way to turn the day D + the RAW file setting out in camera either on my computer?

  Thank you!

  "Is there a way to turn the D + the RAW file setting out in camera either on my computer?

  No, it isn't. HTP is just another word for underexposure.  It allows more space in the highlights at the expense of the increase in noise.  This is how a RAW file is filed and registered.

  Some Canon cameras have settings as well to highlight tone priority and Auto Lighting Optimizer.
  Auto Lighting Optimizer (ALO) analysis in contrast. It changes both shadows and highlights by adjusting the tone curve in high contrast conditions.  It is not reversible then either.

  There are only some certain things that can make a sensor of the camera.  Everything is a modification to them.  Remember that there is no free lunch.  You give to get.

• Try to shorten the time between songs

  Original title: Media Player

  If I am using windows media player and create a list of songs to play how shorten the time between songs, so we can finish and the next songs will start immediately?

  Hey BillTolbert,

  Unortunately, there is no settings to do such things.

  It's common sense, the songs will be the next song to play won't take long to play.

  The next song begins to play as soon as the first finshes.

  Hopefully this should clarify your doubts.

  Good luck!!!

• Is there a way to disable the controls to change fonts

  Is there a way to disable the controls to change the fonts, patterns and other elements of color like that? I work with kids that I need to make them practice their typing but they are more interested in changes all these features they don't type. THX

  Hello OTMarty,

  Thank you for visiting the Microsoft answers community.

  What version of XP are you using? If you use professional or higher, you can use gpedit.msc to deactivate access to view, however you will lose access to it in all accounts except if you select a second time to make changes.

  Your administor account using:

  -Click on Start
     -Click on Run
  -Type gpedit.msc
     - -Click OK

  Group Policy Editor opens

  In the left pane, click User Configuration .
  From the right pane double-click Administrative Templates, double-click Control Panel

  - , Double-click Hide specified control panel applets
     -Select the radio Enable button
  -In the window below and click Show , and the POPs Show content
  -Click Add on the right and Add a window
  - Display type, and then click OK
     -Click OK again
  -Close the Group Policy Editor

  Display is now disabled. However, remember to turn off your policy when you change your display properties, and then turn on again in the Group Policy Editor.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a way to disable the "on-screen keyboard", so it doesn't show up everytime I turn on my computer?

  original title: is there a WAY TO DISABLE THE "ON SCREEN KEYBOARD', so IT doesn't COME up WHENEVER I TURN on MY COMPUTER?

  HOW CAN I DISABLE THE ON-SCREEN KEYBOARD, SO IT DOESN'T POP UP EACH TIME I TURN ON MY COMPUTER.

  Hello

  Control Panel - easy access

  Or WIN Key + U (Win Hold key and tap U)

  How do I change the keyboard to the screen on or off in Vista
  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  Hide a persistent onscreen keyboard on Vista
  http://ITsVISTA.com/2007/06/ITsVISTA-tip-60-hide-a-persistant-on-screen-keyboard-in-Vista/

  Toggle the on-screen keyboard
  http://www.technipages.com/EnableDisable-on-screen-keyboard.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">