Is there an App for Exchange 2010 event entry specifying that TLogs are deleted after a successful backup?

Similar Questions

• Migrate the virtual machine for Exchange 2010 from one host to another

  Dear members,

  Please let know us if the migration of a virtual machine for Exchange 2010 is supported to an Esxi host to another, the Esxi version is 5.0.

  There are unique Exchange environment with the role of hub, CAS and mailbox on the same virtual server. We have a maintenance window and we think moving exchange virtual machine from one host to another, but before that I need to be sure if it's supported my MS and do not want to have problems after, because I have also gotten to know here in the forums this snapshot for Exchange 2010 is not supported by Ms.

  Please notify.

  Kind regards

  I'm not aware of any limitations with VMS Exchange migration. Anyway, you can consider running the migration during the low workload.

  André

• In-Guest iSCSI for Exchange 2010

  Hi, we just built and are ready to go into production with Exchange 2010 using LUNS in guest through the card Microsoft iSCSI initiator iSCSI separate network for iSCSI etc. Load tested with JetStress and everything seems fine. We just found out as snapshots are not supported with iSCSI in guest so we are concerned that the other things work or be taken in charge or another, i.e. of vmotion. So, does anyone know if we lose any other characteristic, and we need to change our minds and using ESX iSCSI? I read pieces on being comparable, that we stuck with a guest performance because that's what we know with our existing Exchange 2007 environment (physical). If we must change, is it simple?

  Hey everyone who is following this thread or found via Google.  It is important to understand what is and is not supported when you are running Exchange on a virtual machine.

  To be absolutely clear, combining Exchange 2010 DAG and migration technologies such as vMotion technology is supported.  You must ensure that you are running at least Exchange 2010 SP1 as well as a version of vSphere that sits on the server virtualization Validation program.

  I think that the link was already posted, but here is the final link:

  http://blogs.technet.com/b/Exchange/archive/2011/05/16/announcing-enhanced-hardware-virtualization-support-for-Exchange-2010.aspx

  More specifically, since the post above (in bold italics):

  Combining Exchange 2010 high availability solutions (database availability groups (DAG)) with hypervisor clustering high availability and migration solutions that will be moving or automatically failover servers for mailboxes that are members of a DAG between clustered root servers, is now supported.

  Improved, that we did in Exchange Server 2010 SP1, with more comprehensive tests of Exchange 2010 in an environment that is virtualized, we are pleased to offer this additional deployment flexibility to our customers. Management of updated support applies to any provider of hardware virtualization that participate in the Windows Server Virtualization Validation Program (SVVP).

  Logiboy123, can you provide any documents to support the statement that Microsoft does not support this configuration?  The above quotes are directly from Microsoft and are very clear that they support not only the migration of Microsoft technology, but also similar to any other provider of the hypervisor technology, provided that they are in the SVVP program.

  Since vSphere is part of the SVVP, Microsoft has extended support for the technologies of migration such as vMotion, in addition to their own Live Migration.  Of course, simply support something does not automatically make it works.  If you want knots vMotion DAG works correctly, you might have settings described in this blog post extended the cluster heartbeat timeout (also a fully supported configuration change):

  http://www.thelowercasew.com/vSphere-and-Exchange-Admins-can-live-in-harmony-Microsoft-finally-supports-HA-and-VMotion

  To answer the original question in this post, using the Protocol in-guest iSCSI is supported and with vMotion in this configuration is supported as well.  You're not really 'give up whatever it is' using this configuration well so if it meets your needs, I would stick with it.  I prefer generally VMFS just because of the flexibility it offers, but all the world has different requirements and I have absolutely no problem with guest iSCSI if your organization requires it.

  Do not forget that whatever configuration, snapshots of virtual machine are not supported for Exchange. Here is another post which goes into detail on it and cover the declaration of support for Microsoft Exchange 2010 snapshots and machine virtual: http://www.thelowercasew.com/virtual-machine-snapshots-and-tier-1-apps-not-always-supported

  So in general, I would say that provided you are running the correct versions of Exchange and vSphere must then take full advantage of your configuration to use features like vMotion and HA without problem.  If you adjust your settings accordingly cluster heartbeat timeout, you should have no problem using vMotion with your knots of DAG.

  Matt

  http://www.thelowercasew.com

• How can I link a photo from my iPhone? Is there an app for that?

  How can I link a photo from my iPhone? Is there an app for that?

  If you download the photo in a kind of service like Dropbox or Google, you can generate a link through this service you can share with people.

  You cannot create a hyperlink to an image that is only on your phone, your phone is not a web server.

• Is there an app for Kindle fire that I can download for my Windows 7 based Tablet?

  I would like to be able to listen to books on my Windows 7 Tablet instead of spending the money for a Kindle Fire.  Is there an app for that?  If Yes, where?

  Hi Charlie,

  I suggest you use your favorite search engine for an app for Kindle fire that you can download to your Windows 7 based Tablet.

  For more information:

  Kindle support contact:

  http://www.Amazon.com/GP/help/customer/display.html?nodeID=200212360

  Kindle help Forum:

  http://www.Amazon.com/GP/help/customer/forums/kindleqna

  I hope this helps.

• Please tell US if there is a way I can recover a FILE that was accidentally deleted from the Recycle Bin. and then "emptied" from the bin.

  Please tell US if there is a way I can recover a file that was accidentally deleted from the Recycle Bin. and then "emptied" from the bin.

  If it was very recent, this tool would have a good shot at it.
   
  Recuva
  http://www.Piriform.com/Recuva
   

• Configure load balancing NETWORK for Exchange 2010

  Hello guys.

  I need help. Where I work, we have a project where we configure Exchange 2010 DAG and some other stuff, and we have 2 ESX with 1 CAD server and a Server CASE/HUB too on both of them and that we want to use the NLB on these two hosts.

  I found this, and this is much like what we want:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1006525

  So now our switch we want to create a virtual IP address for each of them, but we are not sure if we need to create a cluster on our servers for this.

  Did someone done this before that could give me some advice or contains information to make this work?

  Thanks for your help.

  Howdy,

  Am I was right assuming you want balancing two virtual computers CASE/Hub and NO servers DAG?  If Yes, then we are good to proceed... (if you want to do DAG servers load balancing, or if the DAG servers have all three roles, MBX/CASE/Hub, then Windows NLB is prohibited).

  You don't need to create a cluster as in MSCS or the Windows failover cluster, but do not create a pool of machines for load balancing.  You must install the components of Windows NLB on each machine virtual (VM Hub/CASE) and then follow the procedures described in this document: http://www.vmware.com/files/pdf/implmenting_ms_network_load_balancing.pdf to correctly configure the ESX host.  There are two ways to configure a WNLB, using the multicast and uni-cast (by default).  Uni-cast requires configuration changes side ESX (detailed in the document), multi-cast has some dependencies upstream network, mainly adding static arp entry in the router.

  Take a read through the white book (it was written by VI3, but the same thing applies in vSphere) and let me know if you have any questions.

  -alex

  Check out our Blog: http://blogs.vmware.com/apps

• Installation of Foglight for Exchange 2010

  Dear all,

  I downloaded Foglight for Exchange on DELL site, but I found that files html, zip, and car and could not find any file (exe/msi etc.) so guide which miss me to deploy foglight for Exchange.

  Thanks in advance

  Kind regards

  Hussain

  You will need to install the cartridge change and then configure agent/s to monitor your environment.

  Given the fact that you are not familiar with Foglight, you will need to get technical assistance d safe g involved working with you at this stage. Continuing this thread of discussion won't be effective.

  There is also a list of pre-requsites that need to be configured on the target Exchange server/s for our agent to be able to successfully complete:

  http://eDOCS.quest.com/vFoglight/800/files/FoglightForExchange_5.6.9_ReleaseNotes.html

• Autodiscover for Exchange 2010 Outlook 2016

  We have an exchange server 2010 SP3, serving clients Outlook 2010,2013 and 2016. When the server has been set up to detect automatically a MS Outlook kept connectivity test fault but the overall test said that automatic detection works. The test which is a failure is

  

  We recently purchased MS Office 2016 for two clients. These clients connect locally using auto-discovery, but do not connect using automatic discovery on the internet. We use a split DNS where the internal network is .local and the external DNS is hosted somewhere else. I tried to modify the DNS as suggested in other articles. But the result was no e-mail from the internet. Local e-mail only. So if the above question prevents Outlook 2016 operating outside the local network. How can I fix Exchange 2010 to get Outlook 2016 to work from the internet? I should add that Outlook 2010 and 2013 customers work with automatic detection in the network and the internet.

  Better to call on Technet: https://social.technet.microsoft.com/Forums/office/en-US/home?forum=exchange2010

• If it is Possible to change the log for Exchange 2010 running on Esxi 5 drive

  Dear Experts,

  We are running exchange 2010 on Esxi 5, this Exchange 2010 has recently been installed and all the mailboxes have been transferred from exchange 2003 which was a physical server. At the time of migration in exchange 2010 we created newspapers drive 100 GB since big newspapers vmdk is generated when you migrate the mailboxes. As now migration is performed a few months back and now I observed for 2/3 weeks, the behavior of the reader of newspapers for a week only 5 GB is consumed in disk vmdk of newspapers, and that is also supplemented with a backup complete weekly to Exchange.

  I intend to ask, is that I think have newspaper vmdk 30GB instead of 100 GB, so the current of 100 GB of log reader, I can't reduce, but yes, I can create vdisk another to swap, but need advice if anyone has a similar experience to change the disk vmdk of newspapers for the Exchange? With this approach, I try to save 70 GB of storage space.

  I hope my question is clear.

  Waiting for your answers with the thoughts.

  Thank you

  Yes, you must stop the Exchange Services. But Exchange 2010 has a nice Wizard to do this, who can stop the database services, newspapers move automatically and back up the database.

  It is located under the Organization-> mailbox

  

  Leave the database, but only to change the path of the log file.

• What operating system to use for Exchange 2010?

  I'm currently in the planning/design phase of implementation of our new Exchange 2010 server.  Our current environment using Exchange 2003 on Windows Server 2003.

  Exchange 2010 is 64-bit, I want to install Windows Server 2008 R2 64-bit, but my question is... do I install Windows Server 2008 R2 Standard or Enterprise?... What is the main difference between the 2 platforms, OS should I consider before decide me which one to go with?

  I searched online for a while and can't seem to find a definitive answer to this question, or at least a logical explanation that would allow me to determine which is best for what I want.

  Any help is greatly appreciated.

  Thank you

  -Angel

  The main difference between the medium Standard and Enterprise's clustering and memory. It was a big difference in Windows 2003, if you need more than 4 GB of memory. With Windows 2008 x 64 I think 16 GB of memory allows to use this grouping is the $ 64 question. You do cluster CCR or SCR with Exchange 2010?

  Mike

• When I turn on my computer, it gets stuck on the ultra-portable gigabyte 3 screen and custom which leave me there 2 hours still no luck the only button that works are TAB rebooting too

  Original title: stuck

  When I turn on my computer, it gets stuck on ultra-portable gigabyte 3 screen and custom wide movement which I gave 2 hours still no luck the only button that works are TAB restart too it can someone help please

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Error attaching file or deleting email in OWA for Exchange 2010

  Cannot complete this action you tried to run because there is a configuration problem on the server. If the problem persists, contact your support center. The entire error report is listed below: view report

  This problem just started, I know. iPhones still good sync and Outlook has no problem.

  Windows 2008 R2 Standard, Exchange Server 2010 Standard.

  I read articles that say it could be antivirus causes this problem. I disabled AVG Antivirus and the same problem occurs.
  I've also seen mentions of IPv6, I disabled IPv6 and the problem persists.

  Interesting though, if I try to attach a file and I have let it fail and then select the button attach still opens a separate window of the Web browser and when I select a file this time it works. The first time her opens the window browser that it uses a Windows Explorer box the second time, opens a Web browser window. This problem has been for the first time by using Internet Explorer, but the problem also occurs in Firefox.

  Thank you

  Mike

  Hi Mike,.

  The question you posted would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you
   
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
  Or
   
  http://TechNet.Microsoft.com/en-us/Exchange/dd203064.aspx
   
  Hope this information helps.

• is there a manual for Sharepoint 2010

  I'm new to Sharepoint 2010 and after watching several videos re what I would like a manual. Is there one available out there?

  Support is located in the SHAREPOINT FORUMS:
  http://social.msdn.Microsoft.com/forums/en/category/SharePoint/

• Configure load balancing NETWORK for Exchange 2010 - unicast or multicast

  Howdy,

  We are in the process of setting up CASE on VSphere and want to configure NLB. The documents I've read talk about using unicast or multicast modes. Unicast requires more setup server-side and multicast requires additional configuration on the side network. A mode is better than the other?

  Any help would be appreciated!

  Lily, multicast is generally the way favorite due to changes to the requirements to the vSphere host, when you use the multicast mode.  The necessary change disables ESX update upstream switches when a virtual machine is online.  Which means that the switches know where VMS obliging NLB to flood the switches, which is design as well as NLB works.  One effect of this is that the switches will also not learn changes due to vMotion or HA events that extend the time it takes switches to learn that the new location for a MAC address.

  Multicast road requires a static entry in the network layer and does not have the effect shown above.

  -alex