Is there an image based restore?

Similar Questions

• Sorting of images based on their position on the page

  How would I go about sorting the images based on their position on the page? I've read a few articles which mention the use of table method fate and checking their x and y values to sort the table. While that works on the page elements that are perfectly aligned with their x and is the axis, it fails on a layout like this. Does anyone have any ideas on how I could create an individual table for line1, line2, Row3 etc based on his position there and then sort them based on their position X and then create the master table combining them in order?

  I'm new to javascript, so it's a bit out of my League. Any help will be much appreciated.

  

  Hi again,

  I found an idea that seems promising to deal with the issues mentioned above. The main problem, as you have no doubt noticed, is that we cannot simply count about to coordinates (x, y) 'as they are', even after having rounded values, to extract implied rows and columns.

  When we look at the layout below:

  

  our eyes instantly detect what he expected to be 3 columns and 5 rows, but this underlying order is not immediately accessible from all sort all of the coordinates. We need to improve the algorithm.

  What I propose is to speculate about the gaps that occur on the ordered sequence of coordinates x and y, respectively. To reveal these gaps, we will first sort the data along the x-axis:

  

  The figure above shows that the width of the rectangles. Each arrow represents a rectangle, and I ordered the elements by increasing x-centers. We can estimate that the element identified #1 belongs to a new group of this simple fact: its left coordinate (red mark) is higher than the coordinated right (blue guide) of the #0element. This observation will give us a strategy to identify gaps in the column.

  Then, the same method is applied to detect the lines. (Sort by values y, identify gaps, based on the progress of the min - max).

  At the end of this process, each object has a (column, row) coordinate pair instead of fragmented values (x, y) . So, we can calculate the final order, i.e. the weight of the comparison function.

  Here is my implementation of this algorithm:

  // ========================================================
  // Up2Bottom and Left2Right Sorting Algorithm
  //   addressing (weakly) sparse rectangles
  // ---
  // Usage:  Select the objects, then run the script
  // Target: InDesign CS4/CS5/CS6/CC
  // ========================================================
  
  const CS = +CoordinateSpaces.SPREAD_COORDINATES,
        AP_MIN = +AnchorPoint.TOP_LEFT_ANCHOR,
        AP_CENTER = +AnchorPoint.CENTER_ANCHOR,
        AP_MAX = +AnchorPoint.BOTTOM_RIGHT_ANCHOR;
  
  var sel = app.properties.selection || null,
      data = [],
      r, i, j, k, t, n, w, vMax;
  
  if( sel && 1 < (n=sel.length) )
      {
      // Collect coordinates and IDs
      // --> {min:[xLeft, yTop], weight:[x,y], max:[xRight,yBottom], id}[]
      for(i=0 ; i < n && (t=sel[i]) ; ++i )
          {
          data[i] = {
              min:    t.resolve(AP_MIN,CS)[0],
              weight: t.resolve(AP_CENTER,CS)[0],
              max:    t.resolve(AP_MAX,CS)[0],
              id:      t.id
              };
          }
  
      // Find rows and columns [i.e. y-weights and x-weights]
      // ---
      for( j=0 ; j < 2 ; ++j )
          {
          // Sort by center coordinate
          // ---
          data.sort(function(a,b){return a.weight[j] - b.weight[j]});
  
          // min > max ==> w++
          // ---
          for(vMax=(t=data[0]).max[j], t.weight[j]=(w=0), i=1 ; (i < n)&&(t=data[i]) ; ++i )
              {
              if( t.min[j] > vMax ){ ++w; vMax=t.max[j]; }
              t.weight[j] = w;
              }
          }
  
      // Compute final weights, clean up data, create ID-to-weight access
      // ---
      for( i=0 ; (i < n)&&(t=data[i]) ; ++i )
          {
          w = n*t.weight[1] + t.weight[0];  // final weight (y first)
          k = '_'+t.id;                     // ID key
  
          (t.min.length=0)||(t.weight.length=0)||(t.max.length=0);
          delete t.min; delete t.weight; delete t.max; delete t.id;
          delete data[i];
  
          data[k] = w;                      // ID-to-weight
          }
  
      // Apply sort --> r
      // ---
      r = sel.sort(function(a,b){return data['_'+a.id]-data['_'+b.id];});
  
      // Show the resulting order
      // ---
      for( i=0 ; i < n ; ++i )
          {
          app.select(r[i]);
          $.sleep(1000);
          }
      }
  

  @+

  Marc

• Is there a way to restore deleted pictures via lightroom?

  Hello world... I would like to you know a way to restore a few photos.

  1. I had copyed pictures from the camera to my computer

  2. I imported the copy (which was on my HARD drive) of the images in Lightroom (ver.3.3 or 3.0)

  3. I accidentally deleted the original files.

  4. but I found there are still copies of these pictures inside the Lightroom

  5. the photos can be zoom in and out and even turn! In other words, that there is a kind of backups of the original files.

  6. I don't care about the quality, but I really need to restore these images.

  7. is there a way to restore the images?

  I'll post a sample of what I wanted.

  

  See? It is a picture of my little girl. Even if I deleted the original file, I can make bigger it and even rotate.

  It shows only an error message that the file is not there.

  This means that there must be a sort of a backup of the original flles. So please help me to recover these photos

  anyway.

  PS) I know how to capture the screen and I keep this as a final way to get the pictures.

  I used some data recovery programs to restore, but did not-_ -

  LRViewer is the program that can extract previews LR http://basepath.com/ImageIngester/LRViewer-info.php

• Spry - Image Based Navigation - not sure how to proceed

  Hello.

  I am trying to build a menu of navigation from image based on my home page in which the passage of the mouse of an image, a different image is visible and contains a hyperlink that can be clicked on.

  The URL of the web page, I'm working on: http://www.designpopstudio.com

  I want only the vegetable brush and paint to be visible initially and when the mouse is over one of these corresponding images adjacent image becomes visible - and remains visible until it is clicked, taking the user to another page on my site, or the mouse over another image of the trigger.  I don't want to use a ToolTip widget I want to control the position of the adjacent image.

  Images are in place on my homepage using spry to extract data from another html page (http://designpopstudio.com/spry-nav-graphics.html and http://designpopstudio.com/spry-nav-paint.html( )

  Here's what I've included so far in my tag:

  < div id = "Home-nav" > < table width = height of the table "900" = "295" border = "0" > < b > < td width = "327" align = "center" > < div spry: detailregion = "navGraphics" class = "DetailContainer" > {graphics} < / div > < table > < td width = "124" align = "center" valign = "bottom" > < div spry: region = "navGraphics" class = "masterContainer" > {install} < / div > < table > < td width = "107" align = "center" valign = "bottom" > < div spry: region = "navPaint" class = "masterContainer" > {brush} < / div > < table > < td width = "324" align = "center" > < div spry: detailregion = "navPaint" class = "DetailContainer" > {navPaint::paint} < / div > < table > < /tr > < /table > < / div >

  I tried to search for tutorials on how to get my desired effect, but I don't have a strong enough knowledge on the concepts of type quite relevant keywords in Google.

  I don't know how to write javascript so if there is a Dreamweaver solution that would be the ideal.  Otherwise, if someone can point me to a relevant tutorial or the example script.

  Is same spry is the best way to achieve this?

  Everyone else thanks for your time!  I really appreciate it.

  Best,

  Patrick

  My equipment:

  Mac OS x 10.5.5

  CS4

  Do a search on this forum for "disjoint rollovers" Nadja (or was it Nancy?; confuse the ladies) explained it a couple of times and also has relevant external links in these posts.

  Mylenium

• I found the track record, when I deleted it I lost all my videos folder, and when I checked in the Recycle Bin that they were not there.is there a way to restore?

  Original title: restore the follow-up case

  am usind windows vista and I found the track record, when I deleted it I lost all my videos folder, and when I checked in the Recycle Bin that they were not there.is there a way to restore?

  Hello

  Once removed the HDD data can't be recovered. However, you can use your favorite search engine to browse third-party data recovery software and use this software to recover data.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also view the following link to recover lost or deleted files and try the steps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

• Using a System Image to restore a computer HP in Windows 8

  Hi all

  I would like to bring to the attention of all the latest HP help video for PSG.  It shows how to use a System Image to restore an HP computer in Windows 8.

  Learn how to restore your HP computer by using an image system Windows 8. With Windows 8, you can backup all the files and setting on your computer at a time and save it as a system. If you ever have a software problem, you can restore your PC back to exactly as it was when you created the image of the system.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/howto4u.

  I hope this video helps.

• Is there a way to restore a SINGLE FILE in a folder deleted from the Recycle Bin?

  Suppose that you remove all the contents of a folder that contains the files and subfolders. If you open the Recycle Bin, you can see a list of deleted files and subfolders, but there is no way to see the files in the subfolders. So, if you want to restore ONLY a single file in a subfolder of the deleted, it seems there is no way to do it. You can only restore the entire sub.folder, which is not necessarily what you want, especially if you filled out the application parent with other files and subfolders after the deletion.

  Is there a way to restore a SINGLE FILE in a folder deleted from the Recycle Bin?

  Another method would be to drag the folder to the Recycle Bin on your desktop. Open it and recover the files required - re - delete the folder.

  @ Palcouk... you can actually retrieve files deleted, even when they are home to recycle the locker to restore a previous version of the folder parent; These come available restore points so not always guaranteed, but he made the most of the time if action is taken quickly enough. :) Ric

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• How to conditionally display images based on the values of the variables

  I am building a demonstration Captivate containing a slide branching that allows the user to choose which way they want to view; Once they are done, they come back on this slide branching, and I want a check mark to display the button/path that they have already completed.

  I'm new to the use of variables and actionscript in Captivate, so I went the the documentation and the creation of variable is clear, as well as the use of conditional constructions, but I didn't know the instructions of scripts that look like they will allow me to display an image from the library when she is called in the conditional.

  Is this possible? If so, a pointer to an appropriate documentation or sample code would be greatly appreciated.

  Thank you

  Josh

  Hello

  When you insert images of the box, you click the Options tab and give the image a name that you may recognize. Then clear the Visible check box. This allows to keep hidden until you want to show it.

  

  However, note that even if all the image names are listed in the dialog box advanced Actions as being available for show, you will only be able to show an image if you run the fast Action of the blade where the image exists. So you will likely build a means by which you are setting up a variable to indicate that a section has been visited. Then create an action that is performed on slide enter to show the images based on the values of the variables.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• I refused inadvertently images on a site. Is there a way to restore it?

  Was on one of the sites of creation photo (Image Manager) this morning and wanted to get rid of the 'credit' blazoned across the frame. I thought that's what I take away from me. Instead, I blocked all the images to appear. Can I restore it?

  Options / content: click on "load images automatically".

• I have accidentally moved my images directory in the Finder. He disappeared, but when I run iPhoto - pictures are there. How to restore the directory?

  In the Finder, I tried to copy my photos on a USB directory. I dragged rather than copy it. Now this isn't on my USB but it is not visible in the Finder. When I run iPhoto I can see the pictures, but I can't access it now as single files. How to restore the directory of pictures or find all my photo files.

  IM El Capitan 10.11.6 running.

  Thank you

  Stem

  Move it to where it belongs - in your folder. If you don't know where it is so, look for using Spotlight.

• Satellite P870 - simple image backup & restore software required

  Does anyone know of software single disc to backup and restore the C: drive, including the operating system and all imagery files.

  I used to use BartPE which had the shell of Windows XP on CD and booted from the CD and allowed an image must be restored. It didn't matter if the PC OS was broken was a simple operating system on the CD more Norton Ghost 8.

  My Satellite P870 can only boot from USB (selected in the BIOS) and I couldn't get my BartPE to boot from a USB key. Similarly, I installed the software Imaging Odin but is not boot from USB either, but I can run from Explorer (but is based on Windows 8 loading correctly).

  I also downloaded free data recovery Paragon, but it wants to install the program on the laptop. I want a purely mobile car/image copy of program.

  Post edited by: Hanlen

  How about "regardless of your operating system, system files and the schema partition, by the creation of a bootable CD, it can copy sector-by-sector you drive to ensure an identical copy of 100% of the original."
  [http://www.easeus.com/disk-copy/home-edition/]

  And it's free

  Just took good note of your remark on starting - Your P870 boot not the optical drive?

  Post edited by: peterk_1

• Windows 10 - no apps of metro/modern working after the creation of image and restore.

  Hello

  I just created an image with ImageAssist DELLs.

  If I restore the image on the same pc (DELL Precision Tower 3620), modern applications like the store, calculator and so on are no longer open. It s this message: there is a problem with the store. Contact your system administrator to repair or reinstall.

  Hi Maxhawlin-

  Please refer to the following Microsoft article: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_store/troubleshooting-windows-10-pc-metro-apps-not/29fb735f-1511-442a-a1c7-eb081e7524d9?tm=1455316080246

• Updates to Windows System Image after restoration.

  I recently did a restore of the System Image on my XPS9100.

  The restore worked perfectly, but it set the return system 7 months and now I can't get Windows updates. Normally I use the setting: check for updates but let me choose whether to download and install. When I choose verify Windows Update I get the loading/control screen, and I have that let it run for at least an hour before finally changing the Windows Update settings never check updates and then close the computer just get the process ended. I realize that there will be many updates to install from the last 6 months, but it should it will not take long.

  Information system: Win 7 Home Premium with Service Pack 1.  Intel Core i7 CPU - 960 3.20 GHz.  64-bit operating system and I currently have 1.72 free TB on the C: drive. My download speed is a fairly consistent Mbps 60.

  If I check under the put option to update installed, everything is up to 15/07/15 (when I did the disc from the System Image).

  Someone at - it any help?

  1. my computer had been black projection after idle for an hour session. The message on the screen says to press F1 to start, but has nothing else to scroll to the bottom of the screen with the same message. When this happened, the fan was very strong. The only way to stop the process has been to make a hard stop with the power button, or disconnect the whole system. Chrome has been loading slowly - nothing major, but noticeable...

  2 Norton 360 and the subscription is good for 612 days more.

  3 McAffee may have been installed at some point in a test package

  4 NO.

  1. in Windows Explorer [Windows key + E], stand & click on:

  • C:\Program Files\ Norton 360 <=this>  

  Select PROPERTIES: What is the CREATION date displayed on the GENERAL tab that results?

  2. you are running Norton 360 version 22.x or 21.x?  See https://support.norton.com/sp/en/us/home/current/solutions/kb20080417101717EN_EndUserProfile_en_us

  3. you are a subscriber to Comcast Infinity by chance?

  4 East-KB3135445, KB3123862, KB3035583, KB2952664, or KB2990214 listed in installed updates (not update history)? [1]

  5 assuming that Java is installed => is 73 update Java Version 8 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://java.com/en/download/uninstallapplet.jsp [2]

  6. Adobe Flash Player is v20.0.0.306 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://www.adobe.com/software/flash/about/

  7. when (exact date) was Internet Explorer 11 is installed according to the installed updates?

  7B. what Update Version & KB number are displayed in the second line of text using IE11 | [Alt + H + A] tab. for example, Updated Version: 11.0.99 (KB1231231) ?

  8. is Firefox version 44.0.2 (or higher) or Google Chrome version 48.0.2564.116 (or higher) or another alternative browser installed?

  9. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. Glary Utilities; AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. Registry cleaner CCleaner component)?

  ==============================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)
  [2] no need to install Java if it isn't already installed.

• Windows7/Image backup restore

  I have only a 500 GB HDD. Currently, there is a Partition that contains the backup of the Win system. I also creat a Sytem repair disk.

  If I use the repair system restore System Image disc in Prace unallocated on the same physical HARD disk, do this also remove the Partition (where Systrm Image saved) that I have? Help, please.

  Everything will be partitioned and deleted. So if you have something important at present on the drive, make sure it is saved.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/