Is this normal for Firefox Sync connected to my Airport?

When I went into Firefox Sync, I found that it was related to my Airport via its Mac address. I have removed, but since then my Mac address is always listed under "Synchronization Options" and it the airport comes with all boxes checked (passwords, navigation, etc.) When I try to uncheck and click on 'OK', he returned to controlled the next time I look. Is this normal? Or if not, how is it? Thank you.

Hello

The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

This solve your problems? Please report to us!

Thank you.

Tags: Firefox

Similar Questions

  • Cannot register for Firefox Sync

    I tried to register for Firefox sync, but whenever I start to enter a valid e-mail address I get an error message saying that it is an "incorrect email address. The error will appear as soon as I start to enter the first character. I was not able to get to the @ symbol before the displayed error.

    Also, tried various emails different but same problem.

    Could not find anyone else having this problem, it's just me?

    Anyone has any ideas on this?

    Thanks in advance,
    Ray

    Known issue.

    Just ignore this message and continue typing until the entire e-mail address is entered.

  • When I click on a Web page (especially near the text), the cursor blinks on the Web page where I clicked! Is this normal with Firefox v50.0.2?

    When I click anywhere near the text in a webpage the cursor flashes here where I clicked. Is this normal with Firefox v50.0.2 or something wrong with my pc?

    Looks like "keyboard navigation" which allows you to navigate through the text of a document with the top and down arrow keys. The F7 function key activates the navigation with the keyboard on and outside. Or you can use the Options page, the accessibility section. See: Advanced panel - accessibility, navigation, network, updates and other settings in advanced Firefox.

    Was she?

  • How can I remove wrong email for Firefox Sync on my browser?

    Hi all

    I use Firefox 37 recently. I'm new to Firefox sync and made a stupid mistake. I myself registered with my email account but accidently left a character. It seems that the verification email has gone to someone who has that email address.

    I tried to register on the synchronization with the correct e-mail and now I get the message:
    Merge the warning
    Another user has been previously connected to synchronize on this computer. Signing in will merge bookmarks from that browser, passwords and other settings with "... @mail.com '.

    Is it possible to remove the wrong address of my browser?

    Thank you

    Try to delete the folder of the armor and the signedInUser.json file in the Firefox profile folder and delete the prefs.js file to reset the prefs and may also remove the compatibility.ini file to reset the profile.

    You can use this button to go to the Firefox profile folder currently in use:

    Have you created a new account of Firefox?

  • Is this normal for retina imac to do great headphone plug sound during installation first speakers?  Some new arise as well.

    I have an imac of retina.  Since the day I bought it new, I also had new harman/kardon talking plugged into the headphone jack.  This has worked well for more than a year or two.  Recently, I noticed an occasional static or pop.  It is not very strong, it's just boring.  I went to make sure that the headphone jack was still firmly inserted on the speakers and a very strong buzz takes place when you first insert the speakers.  To be fair, makes the noise even if I touch just the end of the shooting (of speakers), as if my human energy is impacting on the speakers.   Is this normal?

    Everything seems to work very well for most Park with the imac and the speakers, once I insert them.  But they are a very strong when buzz jack of first contact with the helmet of the imac.  In addition, it seems to be a very slight whistle full time air and occasional pop of static sound.

    I moved the speaker wire to ensure that they were not in contact with anything whatsoever.

    I changed the plug for the speakers.

    I did a reset of the PRAM.

    I did a reset of the SCM.

    Another thing before I wrap up this thing and go through the genius bar appointment process?  Everything I am on?

    Thank you.

    Hello

    The short answer is no the explanation is that the headphones and speakers, both, must be in the State of "Turn off" when you connect or plug in the unit. Amplified as helmet speakers power can be "plugged hot."

    These phone can get dirty sitting and not mobile. Simply power off all devices and 'gently' work the phone jack to plug and unplug some times help you to establish a better connection. If this does not resolve the static electricity, then consider that it should be considered by a professional.

    Bravo!

  • Mobile authentication, or "SMS recovery' for Firefox Sync planned?

    Is there a plan to add mobile authentication or something like "SMS recovery" at least to Firefox Sync?

    Hi snowtruman,
    Not that I'm aware, but there is always an option to suggest an improvement to Firefox account services. This can be done in bugzilla.mozilla.org.

  • Is this normal for an Application project (developer Cloud Service) takes a lot of time in commissioning?

    Hello

    I just followed the step by step tutorial to create a new project of my developer of cloud service, but then I noticed that the time is too long for the procurement process (more than 24 hours).

    Is this normal or have I done wrong sth in settings?

    Thanks for any suggestions,

    Skender

    oracle_provisioning.png

    Well, I think it's normal since he finished only now the procurement process.

  • You send my user name, I asked my email three times, you did not send. It's for Firefox Sync, I have a new one, please send me my user name.

    I want to synchronize my phone with my laptop. I don't remember my user name, I asked my username more than once, I got nothing from firefox. I'm frustrated with your service. I created a Firefox Sync account earlier. Help, please.

    Sync no longer use a username, it's just your e-mail address. Please use synchronize your bookmarks from Firefox, history, passwords, etc. to upgrade to the new version of Sync

  • is - this normal for a new phone make a humming noise.

    It's normal for a new portable computer fan makes noise

    If it is new, take it back.  It should not make noise.

    If you can't, stop it.  Remove the battery and power cord.  Press and hold the button for 7 seconds.  Now puff of compressed air in one of these boxes, which you can purchase through the vent.

    A common mistake is to actually use your laptop on your lap top, or any soft surface.  The bottom has the inside vents.  That's where air is drawn to cool.  If it's on a soft surface, it blocks the vents and the system is overheated.  That's why I always refer to them as laptops laptop computers rather than the misleading.

  • I've screwed up when I recorded for firefox sync and has not finished recording and did not get the newspaper in the key. Now it says my email address is being used and I can not reregisted with my e-mail address. How can I fix?

    I am trying to sync my iphone

    Go to the following address: https://account.services.mozilla.com/

    If you DO NOT remember your password, click on the link "Forgot your password?" and it will be sent to the e-mail address you used for registration.

    Enter your e-mail address and your password. Follow the additional instructions. This should delete your account and all data synchronization associated with your account from the servers of.

    Then, set up a new account.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • drive hard failure after 2 years of use, is this normal for a 1.6-inch toshiba 80 GB drive

    is the lifetime of a drive hard toshiba mini car shorts... and how to get data back now that the player is without a normal connection only a flat cable...

    In fact, that would be my next suggestion. If you're technical enough, you can use a Linux, or in your case, USB key bootable CD. I have had several instances where do this on a disk failed HARD still allows me to remove some data. Not everything, but it's worth a shot-to-shot, sure! And even if it doesn't work, you still have the USB key to use.

  • Is this normal for XPS 15 9550 screen quality?

    Good evening.

    Last month I bought the XPS 15 9550 with a 4K screen and it had a red tinge in the corners of the display surface, which was visible in a bright room with me, just sitting in front of it. I thought that I have received a defective unit and arranged a replacement through Dell customer support and yesterday I got a new one. However, it has exactly the same problem. To understand what I'm talking about I enclose a picture of the screen. Black background, no external light sources, average brightness.

    Smart phone camera exaggerates this effect a little bit but it is still very noticeable to me. I'm talking even on ghosting and consultation of top / sides when black past completely in red, honestly, I could live with it, but that distortions of color at this angle... I expect too much of a £1,800 laptop? It is worth to try another replacement?

    Not normal. RMA and hope for better luck.

  • How to set my cookie for Firefox Sync settings?

    My cookie preferences are set to ask me every time, but when I try to set up sync it tells me that cookies are disabled.

    Simplest is to allow all cookies temporarily and check cookies are created.
    You must be at least accounts.firefox.com

    Also make sure that DOM Storage is enabled.

  • Is this Normal for CHKDSK?

    Windows 7 has ever given me this problem previously, but is now, and I'm curious to know what would cause this.

    I ran 'chkdsk' command prompt window Admin to check one hard drive, other than my boot, as I usually do.

    Running "chkdsk" from a window seems to do a much better job for some reason any.

    Used the usual, "chkdsk x: /f. The reader is a blank Format, empty 50 GB SATA, who, being freshly cleaned and formatted

    should not, "chkdsk" very long took at all.

    A took almost half an hour, AND used 6.7 GB of system memory.

    Really?

    Somethings wrong.

    Have you used, ran a SFC, chkdsk on reboot on my boot drive, check virus, complete startup disk defragmentation.

    Clean everything. Any ideas?

    Hello

    Disk problems can take seriously very quickly so I would check carefully drive
    now and be sure to keep redundant backups of your important data (use several
    Methods).

    For even better and more efficient to check:<- advanced="">

    At the Recovery Console prompt (if you have one) or
    a Vista/Windows 7 disk - if you do not have a Vista/Windows 7 disk, you can
    borrow from a friend (it must be able to 32 or 64 bits and that they are not a copy)
    protected) or make a. Also your system manufacturer will sell the physical disks
    cheap since you already have windows.

    Chkdsk /f /r

    RESET

    After k and before space / f and before.

    sfc/scannow

    RESET

    Space after c and before.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    ----------------------------------------------------------------

    Go to settings/settings F2 (BIOS/CMOS) often as you start so watch the screen as you start. Set the boot order on CD/DVD, to use disks of Windows (Vista or Windows 7 If you have installed.) Be sure to set in when.

    If you need to repair disks - these help repair Windows not re-install.
    Often, these records will help when the OEM recovery disk does not work.

    Download Windows 7 system recovery discs - charge now $9.75 for ISO
    images to make the discs. (It can be done on any computer running XP,
    Vista or Windows 7 which has a CD/DVD burner).
    http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

    How create a Windows 7 system - free repair disc (must be made on a
    Windows 7 computer running the same 32-bit or 64-bit).
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    An installation disc is possible also to use for repair. Of course you would
    Use your own COST (product key).

    How to: What are my options for Windows 7 reinstall media?
    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

    Welcome to the recovery of Microsoft software
    http://www.Microsoft.com/en-us/software-recovery

    See MVP Andre Da Costa message in this thread.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

    =====================================

    If CheckDisk is unable to fill as above:<-- manufacturer's="" diagnostic="">

    (The old 302602 links isn't now valid for Diagnostics links).

    Manufacturer diagnostic utilities - run one to your hard drive
    http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

    Corrected list dated 06/09/2010

    Fujitsu hard drives: utility of diagnosis here
    http://www.Fujitsu.com/EMEA/products/HDD/

    Hitachi hard drives: utility of diagnosis here
    http://www.HitachiGST.com/support/downloads/

    IBM hard drives: use Hitachi utility *.

    Toshiba hard drives: use Hitachi or Maxtor utilities

    Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
    http://www.Seagate.com/www/en-us/support/

    Quantum hard drives: use the Maxtor utilities

    Seagate hard drives: here Diagnostic utilities
    http://www.Seagate.com/www/en-us/support/downloads

    Conner hard drives: use the Seagate utilities

    Hard drives Samsung: utility of diagnosis here
    http://www.Samsung.com/global/business/HDD/

    Hard drives Western Digital: utility of diagnosis here
    http://support.wdc.com/product/download.asp?lang=en
    Trial versions of one of these 'might' help.

    SpeedFan
    http://www.almico.com/sfdownload.php

    HD Tune
    http://www.hdtune.com/

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

  • In the preview, is this normal for a series of small to keep opening browser windows?

    When I saw in the Internet Explorer browser, I receive a small string of the browser windows that I need to view my pages I have designed for maximized screen individually. Is this a standard DW Preview in the browser process? I use 4 DW and IE 7.  I have Vista OS with screen resolution 1600 x 1200. All the targets of my pages are fixed empty. I don't want myself or my viewers to be entered through this tedious process when the site is finally online. I have a problem here?

    You know, I get that every once in a while. I think it has more to do with how you last left your browser with something to do with Dreamweaver. Go to your browser, maximize, then shut up. Then open it again and see if it happens great this time.

    And, of course, you can't control what your viewers do with their browser, unless you create these behaviours 'display the new window '. Your behavior window was empty, maybe because you have to first select the thumbnail or text... and then in the behaviors panel, press the "add the behavior." Choose browser window open, etc. etc.

    I think I'm repeating myself

    Yes, those big arms can be pretty average... Let's see, it was a Charles Atlas ad in the back of comics, Yes?

    Beth

Maybe you are looking for