Is this ok to turn off V-sync on your laptop / LCD screen

Is this ok to turn off V-sync on your laptop / LCD screen? I know they have a refresh rate of 60 Hz but it will happen if I turn off the V-Sync? good or bad? I know that nVIDIA recommends turning off V-sync to solve problems of stuttering with their current drivers until the next version of driver that is supposed to be in June, so that's why I want to have an answer of expertise regarding the V-sync on your laptop / LCD screen, how it)

Hello berryracer,

The V-sync is the vertical sync.

I can't recommend V-Sync by in the game if possible, there not much difference from native or forced, other than forced takes slightly more resources.

In addition, on the Triple Buffering. The triple-buff forced Control Panel works on application based on OpenGL.

If a game has an anti aliasing, anisotropic filtering or any other option in the game its always best to use the set option instead of forcing by the graphics card Control Panel.

Usually turning off V-sync increases the FPS, you can check it out.

Best regards

Tanuj

Tags: Lenovo Notebooks

Similar Questions

  • How can I turn off the sync between my laptop, the Tablet and smartphone?

    Whenever I have delete emails from my Tablet (Android RCA), it also suppresses these same emails from my laptop. I know there is a synchronization problem, but I can't well a way to change the settings. Can anyone help?

    Why is it a problem? It's normal. It is IMAP to work, which allows each of your devices see the same repository of email, on your ISP server. Delete a message and it has disappeared, deleted from the server so it disappears from all other devices.

    If you want to take the traffic messages, but want to keep for future reference, I suggest that move you to a folder under the Local Folders account in Thunderbird.

    Android devices are usually quite selective about what email they download, so you do not necessarily have a full copy of everything stored on the server as in your phone or tablet. Note the time when you access a message or a folder that you have not looked for some older time. It is almost certainly being downloaded on demand.

    The alternative is to use POP, where each device e-mail client makes its own local private copy. It will also delete the original from the server, unless your e-mail client offers you a place to leave a copy. So carefully, you might have a local copy on a phone or table and delete might be organized does not affect the server. I say "carefully" because the default behavior of Thunderbird is to remove copies of the server when the local copy is deleted. I can't speak for other email clients how to handle this situation. And some do not support POP access. It is not a good fit in the memory limited on portable devices.

    But consider; If all your equipment to leave messages on the server, how do you stop it just things accumulate indefinitely? You will need to either visit the webpage from the server in time to maintain, or designate one of your computers as the 'master' and use it to remove the copies of server.

  • Turn off wireless sync blackBerry Smartphones

    BlackBerry Bold 9700, Version 6, Bundle, 1879 (v6.0.0.448, platform 6.6.0.124).

    BlackBerry Desktop Software: 6.1.0.35 Bundle 34 out June 7, 2011.

    Windows 7 (64-bit), Office 2010 (64-bit)

    On the Blackberry Desktop Software, I select the organizing element on the left menu and see the following:

    (selected) <-->Microsoft Outlook calendar

    (selected MemoPad <-->Microsoft Outlook

    (not selected) Address book (wireless sync)

    (selected) <-->Microsoft Outlook tasks

    In practice, my (Outlook and Blackberry) address books are not synchronized at all.

    The help function directs a as follows:

    Turn off wireless sync

    To synchronize your organizer data, you must turn off sync wireless for each data type of Organizer you want to sync using the BlackBerry® Desktop Software.

    1. On your BlackBerry® smartphone, in calendar, Contacts application, tasks of application or Notepad application, press the Menu key > Options.
    2. If necessary, click a calendar or contact list.
    3. Change the wireless synchronization in No. field or uncheck the wireless sync.
    4. Press Menu > Save.

    In step 1, I can choose one of the apps, but don't get anything like wireless sync options.

    At the top of the Blackberry home screen where the status of telephone network, there is an option to enable or disable the Wi - Fi connection, but after having turned off here, it still does not allow me to sync my address book via the connection cable PC/phone.

    Where and how can I turn off wireless sync so I can sync via cable?

    Try this and do the reverse operation:
    http://BTSC.webapps.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB0...

  • Cannot use Wake on LAN, unless that "allow this computer to turn off the device to save power" is checked

    Wake on LAN - power management

    On my Media Center PC, I am unable to use Wake on LAN unless "allow this computer to turn off the device to save power" is checked (in the tab power management of the adapter in the Device Manager). "Allow this device to wake the computer" and 'Allow only a magic packet wake the computer' is checked, but become grayed out when "allow this computer to turn off the device...". ' is not checked.

    The problem is, Wake On Lan doesn't work unless the computer has been asleep for a short period of time. If I try to activate the computer using WOL after about 10 minutes, he never wake. I guess that's because "Allow this computer to turn off the device to save power" is checked, the machine is before turning off the network adapter.

    Is it possible to force the computer to disable the NETWORK card, but would retain the capability of WOL? Or ensure you THAT WOL works little regardless of how long the PC has been asleep?

    The machine is a Windows 7 PC with a Nvidia nforce network controller.

    By the way, I have a laptop on the same cable network that has all three items checked in the tab for its NIC device power management, and this machine can be awake at all times using WOL, regardless of how long he has been asleep, this issue must therefore be with the configuration of the Media Center computer.

    I would be really grateful for any suggestion, I spent a lot of time trying to get this to work!

    See you soon

    Hello

    If the systems are only a sleep you don't need a magic packet.

    If computers are set to wake on any network traffic all Ping or arp will wake them up.

    For this configuration, it is best to disable the saving of NIC.

    There may be some variations on where is the energy saving setting.

    Here are a few examples, YMMV, look around your systems.

    Example, http://www.ezlan.net/example/powersave.jpg

    Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

    Example, http://www.ezlan.net/Win7/power_save_win7.jpg

    Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

    ----------------------------------

    Real means WOL shut down a computer on Hibernate real position, http://www.ezlan.net/WOL.html

    However as these has involved the PSU cooperation. Motherboard. Network card and are not considered critical by the industry for the user end is a YMMV situation.

    12 Desktop who are under my immediate control (mix and match brands and processors). Only three are fully compliant and properly awake.

    Three satisfied partially, the rest don't care my desires/needs of Wake on LAN.

    On the positive side, since it is now fashionable to go green, the percentage of new computers that keep the better sleep habits significantly improved.

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • Turn off wireless sync blackBerry Smartphones / sync calendar

    I have the BB 9650 with OS 6.0.  I tried to sync my calendar through my office of BB, but it does not work because it says that I need function Turn Off the Wireless Sync.  I tried to follow the instructions below as indicated, but after I click on Options, steps 3,4,5 and 6 are not available.  Does anyone else have this problem?  Help, please...

    In the list of contacts, a calendar, the task list or memo list, press on the

    2. click on Options

    3. to synchronize the calendar entries, click a calendar.

    4 change the Yes wireless synchronization field.

    5. press the menu key

    6. click on save

    Thanks for your help, but I had the problem corrected 2 days ago.  I forgot to close this message.  I ended up calling Verizon, but they could not solve the problem either so they me transferred to the Helpdesk of the real RIM.  While helping me, RIM realized that it was a real problem that they had not addressed before.  They had me remove my battery while working their magic.  When I put the battery back in and turned my phone on the problem has been resolved... Finally!  And all it took was 1 hour and 15 minutes on the phone.

    I tried your directions this morning, but even that has yet to appear on my phone.  But thanks again for trying.

  • my system will be able to save fact and I can't get out of this unless I turned off and restart

    is there any settings I need to adjust

    Hi sauger69,

    Take a look at the following troubleshooting steps with Karena R:

    Windows 7 contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is solving the problems of power. Although convenience stores are not designed to solve all the problems, they are a useful to try first thing, because they can often save your time and efforts.

    Method 1: Run the troubleshooter of power

    The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

    Method 2: Troubleshoot wake the computer from sleep mode

    http://support.Microsoft.com/kb/266283

    Note: even if the steps described in the article are applicable only to the Microsoft mouse, you can always give it a try.

    here original thread

    I hope this helps!

  • 860 - 009na: the monitor turns off during access to / applications change full screen

    Hello

    I got a new computer packed with the HP Envy 32 inch monitor. I am running on an issue that is simply irrating and I don't know how to solve it.

    Basically, the screen is empty. It is not a hard lock or whatever it is, he decides just during initialization more applications full screen (IE, a game) or even post Win10, connect, when computers are like "flickering" during the swap, the screen just turned off. This can be resolved by switching on the monitor input channel, or put the monitor in standby and distributed. On these occasions, I get sound through the screen.

    So appearances, the screen continues to receive entries from the computer and because of switching the monitor off and on again, it display image as expected. This is a case where the monitor is simply decide that it does not want to display the image for reasons unknown. Such as energy conservation.

    I updated the graphics card, provided I got most up to date display driver, double checked the connection... it just happens.

    It feels like it some really boring affecting somewhere that makes the screen, and I really want to change it. For the moment, it is a rate have to turn on the screen and two times just to get the start menu, then if I insert a game, he does even once, when I leave the game, does it again. It does not occur when a game that supports the windowed mode - without borders is loaded (I guess because it is not 'true full screen').

    Thus, it seems to happen during this process to set full screen.

    Well, there is another cable that I was not in the box titled "DisplayPort".

    So I changed my HDMI cable to use this one. The monitor works perfectly now... so as a workaround, this solved.

    But the question remains, why the monitor was so weird when using HDMI? It might be marked up as a potential problem.

  • My cat has turned off the touchpad on my laptop. How do I turn it back on?

    He jumped on the keyboard and turns off the touchpad.  He has done it before and I was somehow able to put on the.  I forgot how.  I now use mouse and don't like it.

    Fantastic!  I finally looked more carefully the signs/pictures on the keys of the laptop, and of course he was there.  I was beginning to think that this kitten was smarter than I am.  (it is probably still) He knew how to turn off twice and I couldn't turn it back this time.  Now I see how easily it turns off when he walks on the keyboard.  Thank you very much.  Maureen

  • Can I turn off Photoshop on my old laptop so I can use it on my new laptop?

    I know, Photoshop CC can be downloaded on 2 platforms such as 2 laptops. I already have Photoshop on 2 laptops, but I get a new. I'm not planning to use Photoshop on my old laptop. Is there a way I can disable Photoshop on my old laptop and put it on my new? Thank you.

    The CC has been activated twice.

    You must turn off PC,

    When install you it on the third computer or for the third time & when activate you, if it installed & activated twice already, there will be a possibility to disable previous computers, please click that. (To disable preinstalled machine, open any application Adobe CC > Help Menu > Signout.)

    Then it will allow you to activate on your new machine,

    Now you can go to your first computer, disconnect & reconnect CC Desktopp app, launch any product, if there is no product to buy, which invites there will be an option for "software license", please click on the & sign.

    It will reactivate the CC on the first machine.

    You have already disabled it a machine, so you can activate it on the third computer.

    http://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivat ion - prod.html #deactivate - problem

    In case it is still not resolved, please contact Adobe to

    http://Adobe.LY/yxj0t6

    Kind regards

    Stéphane

  • BlackBerry smartphones can not turn off wireless sync

    8330 version 4.5.0.33 (Platform 3.3.0.30). desktop version 4.6.0.6; BES version 4.1.2.15

    I use several address books (personal computer, the company contacts, etc.) I have improved my device and desktop software, and now I can't sync my address via the cable books. I used to be able to go to the address book > menu > options > wireless sync: YES or no. Now, I have no wireless sync option in the address book.

    Anyone know how to get it back? Thanks in advance. Nick.

    Go to address book-> Menu-> Options-> Desktop-> wireless sync: YES/NO

    This applies to OS 4.5 devices.

  • How to turn off Auto Sync Safari to iCloud

    You need to change the bookmarks in Safari (OS 10.11.2) without constant synchronization interruptions when I make changes.  This automatic function has already helped me lose to import bookmark files.  How can I disable this function from automatic to manual so I can work on the bookmarks without interruption or risk losing bookmarks?

    ICloud/preferences/Safari.

    Good day.

  • How to you turn off the user invited on the login screen?

    How do disable you the guest user account on the login screen?

    Basically, I have a brand new Macbook, but can't for the life of me figure out how to get rid of the guest user account.

    Summary:

    • MacBook 2016
    • El Capitan 10.11.6
    • FileVault is enabled
    • Find my Mac is disabled
    • Comments User in users and groups is set to Off

    Tried the following from another forum:

    1. make sure that 'find my Mac' and guest user are disabled, restart;

    2. check if the system integrity Protection is enabled or disabled by running: csrutil status to the Terminal.

    3 if she says ' Protection of the integrity of system status: activated. "go to 4.1.

    4. If not, only 4.4 and 4.7;

    4.1 restart in "Recovery Mode": stop and hold command + R after pressing the power button.

    4.2 go in "utilities > Terminal" and run the command: csrutil disable.

    4.3 restart;

    4.4 open the Terminal and run: sudo touch /System/Library/PrivateFrameworks/EFILogin.framework/Resources/EFIResourceBuild er.bundle/Contents/Resources, this will force the update of the connection EFI;

    4.5 reboot (again) in "Recovery Mode": stop and hold command + R after pressing the power button.

    4.6 go in "utilities > Terminal" and run the command: Activate csrutil;

    4.7 reboot and it's fixed!

    4.8 re activate 'Find my Mac' as you wish.

    • FileVault is enabled

    You cannot disable the Guest user. This is especially in the case where you cannot unlock your hard drive. It provides a limited capacity of Safari so that you can access the services of help on the internet.

  • New MacBook Pro turns off every other time I close the screen and takes 2 minutes to restart. How should I do?

    It must be the power management problem, but I can't seem to be able to solve.

    The computer pretty much shuts off if the screen remains closed for more than an hour or two...

    Check the settings in SystemPreferences-> savings.

  • How can I turn off the notification bar 'your Firefox's obsolete... »

    When I open Firefox a notification bar tells me that Firefox is out of date and update. It is annoying and does not suit my needs at this time. I am running v43.

    Could you please tell how I can disable this notification.

    Thank you again for suggestions.

    The notification bar has been erratic, and I don't know that the message of pulsation is not new.

    The heart rate addon is not installed.

    The Wiki of Heartbeat https://wiki.mozilla.org/Firefox/Shield/Heartbeat gives instructions to withdraw from the investigation, what I've done.

    talk openly about: config value browser.selfsupport.url «»

    So far, have not seen the back bar.

    Here I cross my fingers, but if it returns I will post again.

  • Cannot turn off the "home automation" in the locked screen

    Steps to follow:

    1-> password settings

    2 switches to find under "allow access when locked.

    3. try to disable 'Home Control' (drag to the left to make the white switch)

    4 he jumps back and remains green (enabled)

    5 another rocking function as expected.

    Version:

    14A 403 10.0.1

    iPhone 5 c A1526

    Home.app is not implemented because it requires iCloud Keychain that is disabled.

    I feel that you can not disable the lock screen Homekit. https://support.Apple.com/en-us/HT204893

Maybe you are looking for

  • backup iPhone on external hard drive

    With space limited on my laptop, I want to my iPhone on an external drive for backup. I found a few mentions of how to do it online, but none seems to work for me right now, so I thought I'd post on the Community Support from Apple.

  • How to stop the latest version of FF to crash whenever I try to access my gmail account? Never before this version did this.

    The details are in the question. It happens every time and with each account as I have several. It never happened before the last 'upgrade '. I can always access accounts with IE or Chrome as well as accounts are fine.

  • AT100 3.2 upgrade

    Clues as to when when can we in the United Kingdom we expect an upgrade to Android 3.2 on the development? Much web talk already underway, but that is only in the United States?

  • Pages with selectable content model?

    I do a sort of order for a highly customizable product. I would like that it so that the operator can quickly select what sections of the order form to display.  So, if only from a range of 12 sections 1 to 6 are appropriate, I would that the operato

  • Error at startup

    When starting my computer from the menu start opens and a series of * appear in the search box. This has happened regularly starting for the last 2 weeks. I have run virus and spyware scans but nothing was found. It causes the start menu to be useles