Is this true or false?

Similar Questions

• Can I put a READ function in a structure of matter TRUE or FALSE?

  Hello

  I have a vi that operates as a controller for a mechanical system of engines.  There are several sensors of various types, make its contribution to the vi, including encoders, whose period is measured.  The attached vi is the period of encoder part of measure. It measures 15 periods and tells me that the average of the 15 with each iteration of the loop.

  In my application, the encoder measurement period is useless unless the vi knows ALL OTHER sensors in the hardware configuration to measure values in the desired interval.  For example, the sensors A, B and C must all measure between 5 and 10.  If they are all shows values between 5-10, then we want the value to encode it to read and display.  If only one of the sensors, say, is action 12, then, we don't want the value of period for READING or further processed.  So, it is easy to set up the sensors A, B, C, to give a TRUE or FALSE based on what they are handy or not, and if all 3 are TRUE, then, this value can easily be passed to the structure of case that holds my function of READING for the period.  What is a good way to do this?  The goal is to eliminate some unnecessary runtime that would consume the period READ function, as well as all the calculations that are performed on the period collected value.  The data period are of no use if one of the other sensors is not in the correct range.

  If one of the other sensors is out of reach, we want to skip reading encoder altogether.  So, it is easy to structure a Boolean in my vi as indicated in the attachment.  If I do it this way, it throws an error, or just skip READING until the BOOLEAN value is true once again?  Is there a better way to prevent PLAYBACK to occur if one of my other values of the sensor is not in the correct range?

  Thank you

  Dave

  Of course, you can put a reading within a box structure. For your application, simply check that your sensors are all at the beach (palette of comparisons), AND the T/F and use the result of this for the structure of your business. (If you already have the cheque to its scope, I can't see here because you have 5 subVIs that I can not open here.

  Cameron

• I got sms: I won 570000 books in Microsoft Mobile Promo of 8447910649 is true or false... ?

  I got sms: I won 570000 books in Microsoft Mobile Promo of 8447910649 is true or false... ?

  Hello vilaskhandare,

  Unfortunately, it is, as usual, a fake.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Created a form of contact, but when the customer has received potential customer demand, check boxes change to a true or false, there a way to change Yes or no?

  Created a form of contact, but when the customer has received potential customer demand, check boxes change to a true or false, there a way to change Yes or no?

  This is the system default, you can customize either she or you try using forms of third party:

  http://musewidgets.com/collections/all/products/forms-bundle

  Thank you

  Sanjit

• CFSELECT - Yes/No to display showing as true or false

  I'm having a problem with the code below. All three of the boxes work really well together. But I have a problem with some of the data that is returned by the getResponses method in the third cfselect below. All the display returned values appear correctly (ex. A, B, C, good, bad, approved, not approved) in the dropdown menu, EXCEPT when the values are 'Yes' and 'no '. For some reason any 'yes' and 'No' are returned as 'true' and 'false' instead.

  I executed the getResponse outside the cfselect dumping the returned array method and the values are displayed correctly in the 'yes' and 'no '.

  
  < name cfselect = "category_cd."
  bind = "CFC:getCategories(category_cd='#Form.category_cd#') '"
  style = "width: 300px;"
  bindOnLoad = "true" / > < br / >

  
  < name cfselect = "question_cd."
  bind = "CFC:getQuestions(category_cd={category_cd},question_cd='#Form.question_cd#') '"
  style = "width: 300px;"
  bindOnLoad = "true" / > < br / >

  
  < name cfselect = "response_id.
  bind = "CFC:getResponses(question_cd={question_cd},response_id='#Form.response_id#') '"
  style = "width: 300px;"
  bindOnLoad = "true" / > < br / >

  
  In the method that I created, I sank the value from the query, but it always returns as 'true' and 'false '.

  
  < cffunction... >
  ...
  < cfquery name = "qryResponses"... >
  Select response_id, CAST (response_txt as char (30)) as response_txt, response_sort_order_nbr,.
  CASE WHEN response_id = < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#arguments.response_id #" >

  THEN 0
  2 ELSE
  END as kind
  answers
  where question_nm_cd = < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#arguments.question_cd #" >
  < / cfquery >

  < cfloop query = "qryResponses" >
  < cfset responseArray [qryResponses.currentrow] [1] = qryResponses.response_id >
  < cfset responseArray [qryResponses.currentrow] [2] = qryResponses.response_txt >
  < / cfloop >
  < cfreturn responseArray >

  < / cffunction >

  Anyone else experienced this problem with Yes/No values converted to true or false?

  Looks like ajax is making it as boolean.

  Very probably. You could try the hack of the space. Sometimes adding a space in values is sufficient to stop them being treated as boolean.  But check stackoverflow.com too. I know I've seen this issue before, but can't remember if it was more elegant than the hack of space solutions...

• Ikeep getting a screen that says to call 1-877-219-1558 because of possible piracy. Is this true?

  IM told call18772181558, because of piracy on firefox 15.2. Is this true?

  The phone number is a scam, and Mozilla has never had a direct hotline or by third parties.

• I read that Chrome fell npapi support - in the article, he says that firefox has been in December. Is this true? I can't find a source.

  I read that Chrome fell npapi support - in the article, he says that firefox has been in December. Is this true? I can't find a source.

  Google announcement is here: Blog chrome: say goodbye to our old friend NPAPI

  I'm not aware of any time line of em "NPAPI" plugins in Firefox for desktop systems. However, the "click-to-play" function, which has been amended in several press releases, could get some additional revisions...

• I got a message that there is an hour: Trojan.Win32.Generic detected in the time machine.  How can I remove it? Is this true?

  I received a message that there is an hour: Trojan.Win32.Generic detected in the time machine.  How can I remove it? Is this true?

  I have the version of yosemite 10.10.5 OSX macbook air.

  Whence this message?

• I received a note indicating that my MAC might be infected by a virus and she said to call a 1-866 number, which was the support Apple... is this true or a scam

  I received a note indicating that my MAC might be infected by a virus and she said to call a 1-866 number, which was the support Apple... is this true or a scam

  It's a scam

  Whatever you do, do not call this number

• I have an ASUS EEE tablet. I was told firefox does not work with it. Is this true?

  I have an ASUS EEE tablet. I was told firefox does not work with it. Is this true?

  Firefox will work on the Asus Eee Pad Transformer tablet, although there are some known issues with the keyboard dock. For more details, see https://wiki.mozilla.org/Mobile/Platforms/Android#Known_Issues

• Apparently, I got a message to apple that there is a virus on my mac and re directly to a support site. Is this true?

  Apparently, I got a message to apple that there is a virus on my mac and re directly to a support site. Is this true?

  No, this message will be a scam. If all goes well, you don't call any number present.

  Phony 'technical support' / 'ransomware' popups and web pages

• Verizon iPhone 6 with are unlocked. True or false?

  true or false?

  So if I update the software of the ios 9.1 to 9.2 ios, which will affect to my unlocked phone?

  Another thing can only use the phone overseas with the international sim card?

  Thank you.

  The side GSM of 6 more Verizon iPhone is unlocked, update it will not affect the unlocked state. Yes, you can use it with international GSM providers.

• It seems that most every show on Apple TV is in stereo with the exception of a few films. Is this true?

  It seems that almost all of the shows on Apple TV are in stereo with the exception of a few films. Is this true?

  Most of the TV shows for a few years now, were made with stereo and enough tracks all the movies since the 1980s (and some back to 1955).

• N905 true or false?

  Dear Lenovo team.
  I bought a Lenovo N905 phone model Aliexpress 8 core version.

  Link: http://www.aliexpress.com/snapshot/6435500193.html?orderId=65317904231776

  The phone is very slow compared to 8-core.
  Please confirm that it is true or false model.
  The seller wrote the Chinese version, I believe him.

  Sorry to inform you, but it's a fake.

  http://www.China-devices.com/thread-Smartphone-fake-Lenovo-N905

• Help, I'm controlling a flashing, sending him a value true or false within a box structure.

  Help, I'm controlling a flashing, sending him a value true or false within a box structure. The LED changed to resemble a specific indicator, so I can't just create a property node for LED and the value that flashes (unless someone can tell me how). I can see a number of ways to put my blinker indicator changed positions, but they all use while loops. What I am struggling with is controlling the while loop using a Boolean true or false.

  What I try to achieve is to create a virtual car dashboard and control using serial data. I built a VI as follows 3 bytes from the serial port and the data that I send to the VI will be in the form of a letter followed by 2 numbers. I uses the letter to settle the case structure then change numbers to different cases selected by the letter.

  I compare then 2 numbers and according to the ASCII values, I'm a true or false for the comparison.

  So once I set the indicator flashes, I need that it continues to Flash until he gets another command to stop.