Is this version of the Windows 8 RTM or Windows 9 Alpha?

(9200.16384.WIN8_RTM.120725 - 1247) is this build windows 8 RTM or windows 9 alpha?

I'm rather puzzled by your question. Even a quick analysis of the designation of building answers the question. Note that, while it is expected that Windows 8 versions will go to manufacturing and MS partners soon, it is not available to end consumers yet. Places where it could be considered to be available are not good sources and involve various risks. In my view, it is better to stick to the version official candidate/preview until you can get the files of good quality of good sources.

Good luck.

Tom Ferguson

Tags: Windows

Similar Questions

  • Windows Activation error: this version of the Windows Genuine Advantage validation tool is no longer supported. Please download the latest version and make sure that your system clock is accurate.

    Original title: Genuine Advantage error.

    Attempts to run Genuine Advantage so I can install photo pro tools Gets the error:
    "This version of the Windows Genuine Advantage validation tool is no longer supported.
    Please download the latest version and make sure that your system clock is accurate. »

    My system clock is accurate within 2 seconds of the atomic clock in Ft Collins.
    There is no update I can find for Genuine Advantage.

    I have a XP

    Please try USING INTERNET EXPLORER validation only - www.microsoft.com/genuine/validate

    What to validate for?

    what you're trying to download?

  • Cannot install the support for Windows 7n pack because "this version fo the windows genuine validation tool is no longer supported.

    I can't install the support for my version of Windows 7n pack because "this version fo the windows genuine validation tool is no longer supported.  Please download the latest version and make sure that your system clock is accurate. "I am downloading directly from your site, so unless a new version came out... Help IDK

    Make sure that you run from Internet Explorer.

    http://go.Microsoft.com/fwlink/?LinkId=52012

  • Error message cannot use the help files, "this version of the Windows Genuine Advantage tool is no supperted any longer. Please download the latest version.

    Original title: using files to help in windows 7

    I use a copy saved Windows 7, 64-bit, SP1, professional and I can't use my old XP computer help files copyed.  I followed the instructions Microsoft Help and Support and downloaded "WinHlp32.exe". During the process of validation of Windows, I get the message "this version of the Windows Genuine Advantage tool is no supperted any longer. Please download the latest version... ». HOW CAN I DO THIS?

    JIm
    Start the Windows genuine validation

    Jim

    Be sure to use Internet Explorer to validate the OS. If you use a third-party browser Internet Validation may fail.

  • This version of the Windows Genuine Advantage validation tool is no longer supported. Please download the latest version and make sure that your system clock is accurate

    I get this error when I try to download the Microsoft Media Feature Pack for my Windows 7 N.

    When I run the Diag Microsoft Genuine Advantage tool, I get:

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0
    Code of Validation caching online: 0x0
    Windows product key: *-* - V6FF3 - 8CYHC-F6W6R
    The Windows Product Key hash: RDy2 + rOvx/MNnkt2/3DpvIhJK + M =
    Windows product ID: 00432-076-9116013-86508
    Windows product ID type: 5
    Windows license type: retail
    The Windows OS version: 6.1.7601.2.00010100.1.0.028
    ID: {D6128C9F-3963-4F38-B8B5-DAA8216FA555} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: Registered, 1.9.42.0
    Signed by: Microsoft
    Product name: Windows 7 Ultimate N
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.120830 - 0333
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {D6128C9F-3963-4F38-B8B5-DAA8216FA555}1.9.0027.06.1.7601.2.00010100.1.0.028x 64*-*-*-*-F6W6R00432-076-9116013-865085S-1-5-21-4245564716-989467392-3842989403HP-Pavilion,KZ852AAR-ABA a6560tAmerican Megatrends Inc.. 5.32 20081023000000.000000 + 00076FC3007018400F804090409Mountain Standard Time(GMT-07:00)03HPQOEMSLIC-CPC109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Microsoft(r) Windows(r) 7 UltimateN edition
    Description: operating system Windows - Windows (r) 7, retail channel
    Activation ID: dca01e19-01f5-4ce1-98b1-35fb7a323806
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00432-00172-076-911601-00-1033-7600.0000-2452012
    Installation ID: 000536685594380170684166686172458034768882913092742682
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: F6W6R
    License status: licensed
    Remaining Windows rearm count: 4
    Trust time: 20/10/2012 21:26:27

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: 0x00000000
    Beyond: 0 x 0000000000000000
    Event timestamp: 10:20:2012 21:20
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current Hash HWID: LAAAAAEAAAABAAIAAQABAAAAAQABAAEAln2ksi5 + JIfOcD5V4mwIyqAbTFg =

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0x0
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    HPQOEM APIC-SLIC-CPC
    FACP SLIC-CPC HPQOEM
    HPET SLIC-CPC HPQOEM
    MCFG SLIC-CPC HPQOEM
    LASRYVITRAGE HPQOEM SLIC-CPC
    GSCI HPQOEM SLIC-CPC
    SLIC SLIC-CPC HPQOEM
    SSDT HPQOEM SLIC-CPC

    It should work with 32 bits of internet explore.

    new information just been was discovered on this issue. Here's the post-it on the WGA forums:

    Lately, there are considerable problems with validation in all areas of Microsoft, when you try to download the material that requires validation.

    Finally, the Forum Poster Tech Mgr found the cause and a solution!

    When you go to a download page such as for Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit), you get to a page
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=14

    If you click on the continue button on the page, MS currently sends you to the wrong place.

    The solution is to change the existing URL by adding 'real validation' instead of 'details' in your URL of the download page
    so for the one above.
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=14
    becomes
    http://www.Microsoft.com/en-us/download/genuine-validation.aspx?ID=14

    Similarly
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=3941
    becomes
    http://www.Microsoft.com/en-us/download/genuine-validation.aspx?ID=3941

    .. .and your download becomes visible, and you can click on the download button...

    A big thank you to Archbishop Tech for interpretation of this out!

  • This version of the Windows Genuine Advantage validation tool is no longer supported.

    Hello

    I can't update my windows through windows update that it has failed every time error are A 80071, 90 for each KB.

    and I try to download the update by myself and I'm new problem on genuine windows "this version of windows genuine advantage validation tool is no longer supported"

    Help me please...

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0
    Code of Validation caching online: 0x0
    Windows product key: *-* - X92GV - V7DCV-P4K27
    The Windows Product Key hash: aU2z1/fnhnLHmhBm699qYZT2E6s =
    Windows product ID: 00426-OEM-8992662-00400
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7601.2.00010100.1.0.001
    ID: {233EC95C-BADE-4B6C-B695-E5371CB7CD67} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Ultimate
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.120503 - 2030
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 103 blocked VLK
    Microsoft Office Enterprise 2007 - 103 blocked VLK
    Microsoft Office Project Professional 2007-100 authentic
    Microsoft Office Visio Professional 2007-100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {233EC95C-BADE-4B6C-B695-E5371CB7CD67}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-P4K2700426-OEM-8992662-004002S-1-5-21-3863246361-3590132099-2436688886Dell Inc.. Studio 1458 Dell Inc.. A07 20110512000000.000000 + 000E73B3607018400FC04090409SE Asia Standard Time(GMT+07:00)03DELL WN09 103103Microsoft Office Enterprise 200712ACD7202654E586fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6501714100Microsoft Office Project Professional 2007123AB862DE70D8D86UfpXsJvSSVcPufbDdjd0NK73 ug plus89403-707-4159871-6355614100Microsoft Office Visio Professional 2007123AB862DE70D8D86UfpXsJvSSVcPufbDdjd0NK73 ug plus 89405-707-4159871-63446 14

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 Ultimate edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00426-00178-926-600400-02-1054-7600.0000-1812010
    Installation ID: 007376461302379705292552180911167550637304207633577315
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: P4K27
    License status: licensed
    Remaining Windows rearm count: 4
    Trust time: 05/09/2012-06:10:30

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: n/a
    Beyond: 0 x 0000000000000000
    Event time stamp: n/a
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data
    Current HWID hash: MAAAAAEAAgABAAEAAAACAAAAAgABAAEA6GEiNGgNmlEqnsYWoliaiKSGkoVWVVxd

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    REFERENCE DELL M09 APIC
    FACP DELL M09
    HPET DELL M09
    STARTING DELL M09
    MCFG DELL M09
    DELL DELL INC. OSFR.
    WN09 DELL SLIC
    SSDT PmRef CpuPm
    SSDT PmRef CpuPm
    SSDT PmRef CpuPm

    Thank you

    You MUST use Internet Explorer (32-bit) when you access downloads requiring validation.

    Your Microsoft Office installation is a counterfeit - being based on a blocked Volume license key. You must uninstall it and buy a legal copy.

  • Running game - this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program

    I'm having the same problem that is described in this topic: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f15edea1-f88f-492e-bb42-4db2b06fdf05

    My error message is: "this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program and then contact the software publisher. »

    I tried to run the program in question (Castle of the winds) in each mode of compatibility that is on the list and it is giving me this error message every time. Other people have managed to get the program to work, so I don't know, it does not work on Windows 7, but I can't make it work for me.

    Help?

    Hi autohaptic,

    (a) on the computer what Edition\Version of Windows 7 operating system do you use? What type of system? 32-bit or 64-bit

    If you are running Windows 7 64-bit operating system, you can install the 64-bit computer game program.

    (b) on the computer which the castle of the winds game version are you running?

    I want to clarify, if you try to install the program or trying to run.

    Step 1: Put the computer in a clean boot, and then try to run the game

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    You can consider the right version of the game for your computer relocation program.

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I want to install the version of the windows license, so can I have a windows license, I have install windows 7 with this key?

    I have the windows product key 7 with my computer dell laptop. in recent years my brother using the pirated version. now, I want to install the version of the windows license, so can I have a windows license, I have install windows 7 with this key?

    Original title: windows 7

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  • This version is for windows vista only

    The network drivers provided with the computer on cd and on the partition do not work on windows 7. Page lenovo.com for ideacentre k410 drivers I found this:
    Realtek LAN Driver
    h1100043.exe
    5.76 MB Windows 7 32 bit,
    Windows 7 64 bit 7.48.0823.2011 March 31, 2012

    Install on windows 7, I get: this version is for windows vista only... and the installation fails.

    If I can't get this resolved the computer has no value for me, so I'll be back and never buy Lenovo again.

    Hello

    You can try these Drivers

    Be sure to do a full reboot after each installation.

    Realtek RTL8188CE WLAN driver
    h4wc02ww.exe
    11.62 MB

    LAN (Realtek RTL8111F)
    h1100196.exe
    5.82 MB

    Renesas Electronics USB 3.0 Host Controller Driver
    ID5CAR12WW5.exe
    7.11 MB

    Let me know your results

    Thank you

    Solid Cruver

  • Where can I download the 64-bit version of the Windows Imaging Component (wic_x64_enu.exe) of?

    I need the 64-bit version of the Windows Imaging Component as a sine qua non for .net 4.0 but I can't seem to find a download for it.

    The link that I keep finding is no longer available:
    If however, I go to the download page for 32-bit, I can download the 32-bit version without problem.
    Anyone know where I can find this download?
    Thank you.

    Hello

    If found the wic_x64 on this link.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1385

    Now my. NET.4.0 install works

    TWSS

  • Cannot download Photo Story 3 and receive the message error "this version of the program is no longer supported.

    Original title: Why the * (& % $% if I can't download Photo Story 3)

    Microsoft takes me in a big circle, when I try to download Photo Story 3. After that I selected to download, I am taken to a screen where I need to validate my windows. So I have to download a program that is supposed to work on my PC to validate my windows. When I run the validation program, I get a message that this version of the program is no longer supported.

    I will not go into the tale to be taken through 3 or 4 sites only for the back where I started.

    Help, please!

    How can I validate my XP with SP 3 Windows and download PhotoStory3? (I installed today 3 SP.)

    Hello

    I suggest you to follow the steps and check if it helps.
    (a) restart the computer.
    (b) before windows logo appears, press F8repeatedly.
    (c) in the Advanced startup option, select Safe Mode.
    (d) log in to Windows with an administrator account.
    (e) click Start , and then click on work station.
    (f) in the Tools menu, click Folder Options.
    (g) in the tab view, uncheck the option to use a simple file (recommended) sharing the bottom of the list.
    (h) click OK.
    (i) click on the tab display.
    (j) slot hidden files and folders, put the check mark for display the hidden files and folders.
    (k) click to clear the Hide extensions for known file types check box, and then click on OK.
    (l) we will find the nameddata.dat file in the following folder:
    C:\Documents and Settings\All Users Application data authentic
    m file) right-click the data.dat , and then click on Properties.
    (n) click on the tab security.
    (o) click on Advanced.
    (p) on the name tab, please check if everyone is listed. If so, click on the Exit button and put on check full controlbox.
    (q) If everyone is not listed, please click on the Add button and enter the name of everyone (without the quotes).
    (r) press entrance to the keyboard and select full control in the context menu, and then click OK.
    (s) Please, click OK to accept the changes.
    Now, restart the computer and see if you can pass the verification test and install Photo Story3.
    I hope this information helps!

  • How can I install an older version of the Windows Gallery Viewer that has the features I've used?

    I had a version of the windows Gallery Viewer that has editing functions on the right, including the photo of redress and other adjustments. is it possible to still get this version, not the 2011

    You're welcome and thanks for the comments...

    So... apparenty you success install WLPG
    2009 and it was the version you were looking for?

  • Running the version of the Windows XP Explorer in Vista

    I would like to use the version of the Windows Explorer in XP to Vista. It was much simpler sort files into folders by creation date, size, etc.

    Hello wwolverton,

    Thank you for visiting the website of Microsoft Windows Vista Community.

    Try after step in this article there is an option

    Using the files in the Panel Options, you can change how work your files and folders, as well as the display of the content in your folders.

    Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options.

    Change the mode of display folders

    You can change the way your folders look and strive to meet your needs. For example, you can open all files and folders with a single click (for example, links in a Web page) instead of the usual double-click. Here is an overview of the settings that you can change:

    TO

    To do this

    Apply the settings of the current view (for example, list, details, or large icons) to all folders on your computer that are the same type as the folder that you have currently open. (Documents and details of the music are examples of file types).

    In the file that is currently open, click on organize on the toolbar and then click folder and Search Options.

    In Folder Options, click the view tab, and then click on apply to records. (To switch these folders back to their)

    settings by default, click Reset Folders)

    Turn off the preview pane and the details pane in all folders. This setting gives you more space to view the files by hiding the components that you do not have.

    Click the general tab and then click on use Windows classic folders. (To re-enable the components, click filters and preview.)

    Open each new folder in its own folder window. This can be handy if you want to keep all the files you are working on the screen at the same time.

    Click the general tab and then click on open each folder in its own window. (To make each new folder replace the previous folder window, click on open each folder in the same window.)

    Open an item with one click. Use this setting if you want the files and folders to open with a single click, just like links on a Web page.

    Click the general tab, and then click single-click to open an item. (To return to the standard click, click double-click to open an item.)

    To restore the behavior of origin of your files, click the general tab, and then click default settings.

    Top of page

    Change advanced file and folder settings

    You can make additional changes to the appearance and behavior of your files and folders using the Folder Options Advanced settings in Control Panel. Here is an overview of the settings advanced you can change:

    TO

    To do this

    Always show icons never previews and static files thumbnails of the files. Use this setting if thumbnail previews are slowing down your computer. You will get better performance by using static icons.

    Click the view tab, and select the always show icons, never thumbnails check box.

    Always show menus above the toolbar. Use this setting if you prefer to have access to the classic menus, which are hidden by default.

    Click the view tab and check the box always display menus.

    See the size of a folder in a ToolTip when you hover your mouse over the folder. Use this setting so frequently, you must know the total size of the contents of a folder and like to see this information to leave the mouse on the file pointer.

    Click the view tab, and select the file size information in folder tips check box.

    See the files and folders as hidden. Use this setting if you work with files that are usually hidden from view, such as user files that have been marked as hidden.

    Click the view tab, and then click Show hidden files and folders. For more information, see Show hidden files.

    See the files with lines that connect folders and subfolders.

    Click the view tab and clear the display simple folder view in the control box for the Navigation pane.

    See the extensions of filename in file names. It's a good way to ensure that the files are not

    malicious software disguised as common files.

    Click the display tab and disable hide them extensions of known file types check box. For more information, see show or hide file name extensions.

    See all the system files that are usually hidden from view.

    Click on the view tab, and then clear the Hide protected operating system files check box.

    Increase the stability of Windows by opening every folder in a separate part of memory. Use this setting if your computer breaks down often, and you try to minimize the problems or solve problems. Be aware, however, that this could slow down the performance of your computer.

    Click the view tab and select the launch windows folder in a process separate checkbox.

    Ignore the custom of each folder view settings and open all files by using the default settings in place. Use this setting to force all files to stop using the display settings that you specified.

    Click the view tab, and then clear the save view settings to check each folder.

    Automatically open the folders that you were using when you turn off last Windows whenever you start your computer. Use this setting to help you preserve your work from one session to another.

    Click the view tab and select restore them windows files to the logon box.

    Hide the drive letter of each drive or device in the computer folder. Use this setting if you do not want to see the drive letters on your computer and would prefer to see only the friendly name of each drive.

    Click the view tab, and then clear the show drive letters check box.

    Display

    encrypted or

    NTFS compressed files as ordinary files, without any unique color coding to identify them. Use this setting if you have encrypted or compressed

    NTFS files and do not want to see them represented differently than other files on your computer.

    Click on the tab view, and then clear the Show encrypted or compressed NTFS in the color box.

    Disable the ToolTips that appear when you hover your mouse over the files. Use this setting if you do not want to see the file information that appear in ToolTips when you move the pointer over files and folders.

    Click the view tab and clear descriptions see the pop-up for the folder and the items on the desktop check box.

    Never show the contents of the files in the preview pane. Use this setting to improve the performance of your computer, or if you do not use the preview pane.

    Click the view tab and clear the show preview handlers in preview pane check box.

    Add checkboxes for views of file to make it easier to select several files at once, which can be useful if it is difficult for you to hold down the CTRL key while clicking to select multiple files.

    Click the view tab and select the checkboxes use to select the objects check box.

    To restore the behavior of origin of your advanced settings, click the view tab, and then click default settings.

    Pasted from http://windowshelp.microsoft.com/Windows/en-US/Help/3a3bfe59-5268-4fb3-81c5-7972c28939cd1033.mspx>

    This should solve your problem.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • You try to create VHDX or another format not supported for this version of the server

    Hello

    I have a problem with vWorkSpace do not load VM and I really hope that someone here might be able to add comments. We run vWorkSpace v8.5 on a box of windows server 2012 and v6.1 Hyper-V on Windows Server 2008.

    After running then changing the main image, I've updated the image of our cloud. Once the update of the virtual machine would not load, giving the below error

    End of the action (create) (failed to create. CreateVM: Unable to create the virtual machine of provided information. : CreateVhdxDisk: try to create VHDX or other format not supported for this version of the server. Path to the virtual disk: .avhd - call stacks - to Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)
    at HypervLocalExecutor.HvCreateVM (string strUser, strPwd, VmCreateData createData, String strDomainNameIP, VmResult String & result)
    to CHyperVClone.doClone (basic_string<>\,std::allocator > * nsHostName, basic_string<>\,std::allocator > * nsUsername, basic_string<>\,std::allocator > * nsPasswd, VmDefData * vmData, basic_string<>\,std::allocator > * strDomainIPaddress, NewVmInfo * newVmInfo)-> Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
    at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
    at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
    at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP))...
    5 March 2015 15:54:15 - 1392:8580511090155201372 - caught error: Stack Trace and stack Exception below:
    at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
    at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
    at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
    at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)

    We believe that it is somehow to do with Hyper-V under Windows 2008 and vWorkSpace running on Windows 2012 - the VHDX format is not supported by the version of Hyper-V server. A glance online confirms this. So my question is, how update the master image changed the format VHD vWorkSpace wants to use and is there a way to assign vWorkSpace don't know this format?

    I have widely in search of a solution to this line and not found anything it either, nor there seems a clear way in the vWorkSpace console to change that.

    Thank you

    Hello

    I suspect that you have created a snapshot on your model.  It is not supported, if you delete the snapshot so that the .avhd is merged to the vhd/vhdx and update the model in vWorkspace again.  If this does not work, you will need to delete the model of vWorkspace and then re-import.

    Concerning

    Paul

  • ORA-03134: connections to this version of the server are no longer supported in 11.2 to 9.2.0.8 database

    Hello

    I use the ODP.NET 11.2 (Oracle.DataAccess.dll 4.112.3.0) for .NET 4.5 (in Visual Studio 2012). I can connect to 11g databases but when trying to connect to 9.2.0.8 database, this error is thrown:

    ORA-03134: connections to this version of the server are no longer supported

    I do not understand why, like I could connect using Toad, but not a .NET application.

    Furthermore, I use Windows 7 64 bit.

    Any idea?

    Thanks in advance,

    Dave

    Hi Dave,.

    I see that you have version 12 of the supplier in the GAC (i.e. Version = 4.121.1.0). But only for the x 86 and you mentioned that you had Windows 7 64 bit. Your application is compiled as x 86, x 64 or Any CPU?

    You have confirmed that your application does not load this version? For example, because policy redirects in the GAC (such as Policy.4.112.Oracle.DataAccess, Version = 4.121.1.0).

    You can use a tool such as SysInternals Process Explorer or the Assembly Binding Log Viewer (i.e. the SDK fuslogvw) to confirm if necessary.

    It is true that version 12 would return ORA-3134 when you attempt to connect to a database of 9.2 because this combination is not supported.

    Thank you

    Mark

Maybe you are looking for

  • How to use the Apple TV Airplay Mirroring combined with Bluetooth speakers.

    It looks like if I check as airplay speakers Bose will not work. If I check my Bose speakers, Airplay will not work. Is it possible to watch on my Apple TV Airplay Mirroring Crave, while the sound coming from my speakers Bose of Bluetooth and not TV?

  • Why the SD-R6112 drive will not read the table of contents through DVD Decrypter?

    Why the hell used my reading of DVD-ROM/R/RW Toshiba SD-R6112 the TOC through DVD Decrypter?She normally does! I use nero, Decrypter, DVD Shrink, and even Windows medai Player 9 series. It was working fine 2 days ago now pfft, will not work. Everythi

  • 6360 b: Probook 6360 b boot from USB how to change bootpriority for USB

    I had a USB bootable on this laptop. This trial went very well and now I have a bootable USB key with a start and a windows - of the recoverypartition on this subject image. Now, of course, I want to test this bootstick but I when I look to change th

  • Closure of the elements in an array

    I make a program in which I have a Toolbox of instruments off which some, I need to program several times, which I use for (No. sometimes, I need to repeat the sequence of the instruments) and then at the end of the day, I use End (For) ehich stops e

  • How can I fix a svchost.exe error 'Ox7c919af2 '?

    I get a "Ox7c919cf2" (.. .referenced at "0x00000010") svchost.exe error each time I restart my computer.  Debugging doesn't fix it, even if it offers me the option on the popup error message! I looking for viruses, downloaded and executed the TDSS Ki