Is - this windows 7 works with SDRAM and DDR Rams (1)?

Original title: RAM for win7

Hello

Did windows 7 works with SDRAM and DDR Rams (1)? !!!

Yes, Windows 7 works with this type of memory RAM. Windows 7 requires a minimum of 1 GB of RAM, which is more important.

System requirements:

* 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
* 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
* 16 GB of disk space available (32-bit) or 20 GB (64-bit)
* Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

Tags: Windows

Similar Questions

  • Lightroom 6.4 not work with nikon and nikon d610 d810 in 10.10 mac, anyone else have this problem?

    Lightroom 6.4 not work with nikon and nikon d610 d810 in mac10.10, anyone else have this problem?

    When you say won't work, what are the exact symptoms that you see on the screen? Error messages? Codes?

    How do get you pictures from the camera to the computer? If you use the Nilkon software, try using a card reader instead.

  • Is - Windows 7 works with Satellite M70 129

    Hi all

    How are you guys?
    wanted to ask you if Windows 7 works with Satellite M70-129 or not?
    Toshiba is going to support or not with drivers and other things?

    Thanks in advance

    This is a user to use the forum, so if you wait for an official statement from Toshiba then you can wait until you get gray hair
    If you want to hear my opinion then this is

    Windows 7 is very similar / same as MS Vista OS. It supports only a few additional features and options.

    In the European Toshiba page driver I found the Vista drivers for this laptop M70 series and I guess these drivers could be used on Windows 7 too.

    Good bye

  • An error occurred while Windows was working with the Control Panel file C:\WINDOWS\system32\ALSNDMGR. CPL.

    Title:C:\Windows\System32\ALSNDMGR. Original CPL.

    Running Windows XP PRO this message "an error occurred while Windows was working with the Control Panel file.

    C:\WINDOWS\system32\ALSNDMGR.cpl.

    Can I re-enstall or the download file?

    Hello
     
     
    1. Once you get the error message?
    2. What is the card its installed on the computer? E.g. Realtek
    3. do you have a cleaning registry registry booster software installed on the computer or third party?
    4. are you able to play sounds on the computer?
    5. have you done any software or hardware changes on your computer before this problem?
     
    Alsndmgr.cpl made reference to the Manager his control panel Realtek Semiconductor AC97 file.
     
    If you have the card Realtek sound on your computer, try the following steps
     
    Method 1:
     
     
    If you have your CD of the sound card, I suggest to uninstall the card drivers sound sound card support applications and reinstall them.

    Reference:
     

    How to manage devices in Windows XP

     
    See also:
    Method 2:
     
    You can still download the drivers from the Realtek or the sound card manufacturer's Web site.

    http://www.Realtek.com.tw/

     
     
    Hope the information is useful.

    Thank you for the help, I downloaded the 97 Realteck PGM. He cured the issue.

  • What I see if I work with Microsoft and exchange of data on the creative clouds with people working on Apple?

    What I see if I work with Microsoft and exchange of data on the creative clouds with people working on Apple?

    That all depends on what you want to share

    The data files that are "industry standard" such as the JPG images are the same on both platforms

    Files that are specific to the platform, such as video files on a Mac or Windows, AVI video files MOV will either require conversion or additional software (to open a MOV file with a Windows program, you must have installed Apple Quicktime for Windows)

    In addition to this, the files that are specific to Adobe... such as the InDesign files... are not always compatible because of new features in newer versions, like a Premiere Pro video project file created in the 2015 version cannot open in 2014 version

    If you have problems with files and specific programs, you should ask for help in the forums for these programs

    If you start the https://forums.adobe.com/welcome Forums Index

    You will be able to select a forum for the specific Adobe products you use

    Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

  • Working with date and time of the request for help from acrobat JavaScript...

    This coming from

    Working with date and time in Acrobat JavaScript (part 1 of 3)

    The following code adds five days to the current date, and then prints the new date in the console window.

    Get the date and time

    var rightNow = new Date();

    Get the value of millisecond

    Article date

    var msRightNow = rightNow.getTime ();

    Calculate in milliseconds, of 5 days

    5 days x 24 hours/day x 60 min / h x 60 s / min x 1000 ms/s

    Challenge of var = 5 * 24 * 60 * 60 * 1000;

    Do the calculation of var CFAbsoluteTime = msRightNow + challenge;

    Create a new Date from the calculated value

    var theNewDate = new Date (finalTime);

    In the actual work on a form code, you'll want to place the

    the object of a field value. But since this is test code, we will

    Print the result to the Console window (great for debugging)

    Console.println ("5 days from now is:" + theNewDate.toString ());

    The foregoing is the exact code (cut and paste)

    The error I get here is;

    ReferenceError: theNewDate is not defined

    1:Console:exec

    undefined

    To get the "undefined" question a lot... it seems to me, learn to distinguish the undefined 'of type' undefined 'variable' and undefined 'value '.

    in this case 'theNewDate' seems to be defined as a variable equal to the current date plus 5 days... BUT I am now "educated" enough to 'see' Why am I getting the error...


    Any thoughts... Any who...

    You need to highlight all the text that you want to run.

    You have not set the rightNow variable before you can apply a method to the variable.

    You can just add a new variable as msRightNow name. Why not use rightNow.

    Executes the code that you provided with a new departure of Acrobat, I get the following error messages:

    rightNow.getTime is not a function

    1:Console:exec

    TypeError: rightNow.getTime is not a function

    1:Console:exec

    undefined

    What you are showing probably works because your previous attempts have left behind them a variable "rightNow" and as long as you do not have the object of time date change too much, you will not notice the error.

    Cleaning of your code:

    get the number of milliseconds of the date object.

    rightNow var = (new Date()) .getTime ();

    define 5 days in milliseconds;
    Challenge of var = 5 * 24 * 60 * 60 * 1000;

    Add 5 days to the value of this moment and assign the result to the last time;
    var CFAbsoluteTime = rightNow + challenge;

    convert finalTime value in a date object.
    var theNewDate = new Date (finalTime);

    display the result;
    Console.println ("5 days from now is:" + theNewDate.toString ());

    Have you tried the code that I provided, it is another way to add days to the date object.

  • Cannot run or install images of Windows 2000, Windows 2000 works with Fusion 5 Pro?

    I have existing images of Windows 2000 tried to run. I also started an installation of Windows 2000 from scratch. Each time Windows 2000 appears at startup with the | bars progress, but when you get to the end, my Mac everything freezes. I have to hold the power button / stop. So far, Win XP and Windows Vista work fine.

    Windows 2000 works with Fusion 5 Pro?

    I use a MacBook Pro of the retina with the default settings.

    Or, go into the settings for this virtual machine and under Advanced.

    change the preferred virtual machine runtime engine for ' Intel VT - x / EFA ", for each of these virtual machines, give you problems.

  • Original title: A new version of windows will work with my Windows XP?

    Original title: A new version of windows will work with my Windows XP?

    My computer needs a new startup disk, as I lost the original. Is it possible to buy a new one with Windows 7 or XP?

    Why do you think that your computer needs a new boot disk?

    It would be surprising to find a genuine Windows XP CD in the retail market (a store) these days, but you can make Internet purchases and may not be no need to buy one at all because it's nice to make just a copy of one from a friend.

    It is a good idea to have a couple of different bootable CD in your arsenal in case your XP problems a day and do not start.

    I find that most people can get by with a bootable XP Recovery Console CD you can do (no XP media required) and a Hiren boot CD.

    I've never seen a XP problem that I can't solve if I at least so many of those - and they are free to do, and you don't need any Microsoft original media to create.

  • Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?

    Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?

    Hello

    You receive an error message?

    Method 1:

    You can update the drivers of graphics cards and check.
    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly


    Method 2:

    You can also perform a clean boot and check if it works:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article

    You can also check out the link:
    The problems of the game performance
    http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
    Diagnose problems running DirectX
    http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  • I used to work with Interbase and Firebird and used databases the keyword "domain". I am now switchig to Oracle as a primary database and would like to find an alternative appropriate "domain" in Oracle, as it appears he does ' t taken in charge the stand

    I used to work with Interbase and Firebird and used databases the keyword "domain".

    I am now switchig to Oracle as a primary database and would like to find a suitable

    Variant of 'area' in Oracle such that it appears he does ' t support the standard SQL syntax.

    for example:

    Create the int2 smallint field;

    create domain id2 int2 default 0 not NULL; / * for the primary key * /.

    create domain rel2 int2 default 0 not NULL; / * foreign key * /.

    I tried a couple of approaches to achieve this "area" is:

    1. create synonym - cannot be used with the basic types;

    2. create the type - type of work, but the implementation is rather clumsy

    and can be costly in terms of performance.

    Is there something else to Oracle that can emulate the feature "domain"?

    Thanks in advence, I got really approciate any help on this.

    Alex.

    Your best approximation is CREATE TYPE, but their is nothing of what is a 100% adjustment.

    For example, if you create a domain with a check constraint you need to implement than separately on each table.

  • Working with XML and button

    Hello

    How are you all. Well, I'm new to Flex. But I started to build simple applications. One of the best most problem I face in working with XML and the button. Can you please help me in this. I explain my problem:

    I have an external XML file like this:
    < menu >
    < button >
    < idnt > 0 < / idnt >
    General Health < label > < / label >
    pages of < text > general health is currently under construction < / text >
    < / button >
    < button >
    < idnt > 1 < / idnt >
    < label > mental health < / label >
    pages of < text > mental health is currently under construction < / text >
    < / button >
    < / menu >

    Now, I want to generate dynamically buttons from this XML file. And the second thing that is the most problematic is that how I code so that when I press the button marked 'General health', it will display the same text as in the XML corresponding to the tag tag "< label > General Health < / label >?
    I seriously need it. I'm really confused on this. Kindly help me.

    Concerning
    .. : DeX

    Dear Peter,

    Thank you, thank you very much... bundles of thanks from me. You really help me with this. I wasn't expecting such a detailed response from anyone. But you the wrong given. Thank you very much.
    My MSN account ID is "[email protected]". I would be very happy if you add me to your contact list or let me know your email address. I am not your hotmail ID ask you many questions, would just be a friend to share new ideas and knowledge.

    I thank once again...
    .. : DW

  • I'm working with Gmail and I see that my browser too old! I have also the same without any extension. Please help me. Thank you

    I'm working with Gmail and I see that my browser too old! I have also the same without any extension. Please help me. Thank you

    You have a user agent which is corrupt and which identifies you as: undefined GoogleToolbarBB

    See:

  • Windows Automated Installation Kit for Windows 7 works with Windows XP SP3?

    Windows AIK for windows 7 works with windows xp sp3... the docs said windows XP sp2

    Hello

    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server deployment. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  • can a laptop running windows 8 work with a hp officejet 6210 printer all in one

    can do a [hp 15 laptop Clubhouse] laptop running windows 8, work with a HP officejet 6210 printer all-in-one?

    The Windows 8 shows it as being compatible hardware compatibility site.

    The drivers are located here.

  • graphic and CPU recommended for a freelance artist working with cintiq and photoshop

    im going to use the cintiq 22hd to use advanced daily for digital art.
    What processor and graphics card type recommended for a freelance artist working with cintiq and photoshop?

    Hi Drok'e,.

    Please see the following articles:
    For graphics card: video card FAQ and Adobe Photoshop CC GPU (graphics processor)

    Requirements of CC of Photoshop: Photoshop system requirements

    Kind regards

    Tanuj

Maybe you are looking for