Is V15 Nitro Black Edition - VN7 - 591 G-70RT free voltage?

I'm ready to buy Nitro Black Edition VN7 - 591 G-70RT V15. However, I live in a country that only supports the 220 voltage. I would like to know if this product is voltage free or just support voltage 100. Thanks for reading

all power adapters are normally 100-240V

the model is LiteOn PA-1131-05

Part number for Acer

KP.13503.004

Tags: Acer Laptops

Similar Questions

  • I have the Acer Aspire V15 Nitro Black Edition VN7 - 591 G-729V with a 2.5 inch Samsung SSD?

    This is the laptop that I don't speak - http://www.amazon.com/Acer-Aspire-Edition-VN7-591G-729V-15-6-Inch/dp/B00WJSQS02?ref_=pe_623860_70668...

    And this is the SSD I don't speak of - http://www.amazon.com/Samsung-2-5-Inch-Internal-MZ-75E1T0B-AM/dp/B00OBRFFAS/ref=sr_1_1?s=pc&ie=UTF8&...

    My question is if I can remove the HARD drive of 1 TB of the laptop and put in this 1 TB of Samsung SSD? The laptop comes with 256 GB SSD already installed inside, so I was wondering if I could rock with this SSD and the Samsung TB 1 one as well.

    In a Word, Yes.

  • Can we do a disassembly video or guide of the Acer Aspire V15 Nitro Black Edition?

    The laptop in question is the Acer Aspire V15 Nitro Black Edition VN7-591 G - 4 K 729V.

    There is literally no clear disassembly video which is in English and subtitled in English. As most of this community knows, the Acer Aspire V15 does not have a maintenance hatch, so you literally have to take off the keyboard as well as all of the top panel to make any kind of change.

    I want to replace the HDD with a SSD and most of the time I don't know where the slot for it, but it's all the other threads that worry me. Knowing what must be disconnected when you lift the keyboard and what belongs in knowing where is a nightmare. I'm not quite trust by opening, can someone make at least a step by step guide, with or without photos or at the most a video in English? Thank you.

    Philetus wrote:

    This type of connector you very gently pust both sides of the black bar the White side. Reinstall the cable, you must stand out as you reglissez the water in.

    What type of connector do you speak? These 3 connectors which are connected to the keyboard when you lift first open?

  • Acer V15 Nitro Black Edition battery stopped working

    Just ordered a new V15 Nitro Black Edition (Skylake). I turned it on, set up Windows 10, everything worked perfectly. I also ordered a SSD m.2, then I decided to pop the laptop open and install it. Installation, apparently went well, but now the laptop will not boot without the power adapter is plugged in. It seems that the battery must have been disconnected? Not really by where to start, I don't see any annoying cable inside the case. I removed the SSD to see if he was not playing well, has not made a difference.

    Help!

    I seemed to have solved the problem: it wouldn't boot on battery without all the screws on the bottom of the case replaced. I guess this thread could use a quick response for a person in the same situation well! I freaked out too quickly.

  • Upgrade of RAM Acer V15 Nitro Black Edition (Skylake)

    Hello

    I just ordered the new model of skylake V15 Nitro Black Edition. Before that happens, I want to go look for an upgrade of RAM and that the first order of the day. I wonder if the 8 GB model is using 4GBx2 or 8GBx1? And also, what form the RAM are so I know what will work with the existing stick?

    Hello

    Yes of course. You can use HWINFO portable version (without installation). You will see the brand and the part number of the memory module.

  • Aspire Nitro Black Edition VN7 - 592 G-70EN (NX. G6JAA.004) - anti-Glare Screen?

    Aspire Nitro Black Edition VN7 - 592 G-70EN (NX. G6JAA.004) - t - it have a screen matte non-glare?  The description on site microcenter says Full HD widescreen LED-backlit IPS.  On the site of the Lim, it says ComfyView plan adjusting the color LCD technology.  Does not over mast or anti-glare anywhere.

    No glare so Matte.

  • Impossible to adjust the brightness of the screen on V15 Nitro Black edition

    I have Acer Aspire V15 Nitro, and I can't adjust the brightness of the screen with + or + touch. Not even in power options. As it is locked somehow to a light post. Does not change when it is on battery regardless of what is specified in power options...

    Any ideas? Thank you

    Try to re - install Launch manager:

    http://global-download.Acer.com/GDFiles/application/LaunchManager/LaunchManager_Acer_8.00.8111_W81x6...

  • M.2 VN7 PCIe slots - 592 G-70EN and change wireless card? ASPIRE V15 Nitro Black edition

    Recently purchased a VN7 - 592 G-70EN. It comes with 1 TB of HDD and SSD Samsung mznlf128hchp-0000. Have not yet opened the laptop.
    I would like to know if I can replace this SSD with a m2, this laptop computer motherboard has one slot m2 for.
    Ideally I'd like to replace it with M.2 PCIe NVMe, do not know if this Council supports those.

    Also can I replace the card wireless Atheros Qualcomm with killer in 1525. ?

    Motherboard model
    Model Aspire VN7 - 592G (U3E1)
    Version V1.01
    Intel chipset provider
    Model of chipset ID1910
    Chipset revision 07
    Southbridge Intel supplier
    Southbridge model IDA14E
    Southbridge review 31
    BIOS
    Insyde Corp. brand.
    Version V1.01
    Day 03/09/2015

    SSD slot
    SAMSUNG MZNLF128HCHP-00000
    Type of SATA 6.0 GB/s SATA-III
    Type of appliance fixed
    ACS2 Standard ATA
    Serial number S28TNXAG740830

    I think you're a little confused.

    The SSD is a protocol M.2 Sata SSD from Samsung that you can read on herehttp: / /www.samsung.com/semiconductor/products/flash-storage/client-ssd/MZNLF128HCHP

    And yes it can be replaced by another more big M.2 SSD NVMe/PCIe Protocol or SATA. Although speeds are currently limited to current BIOS-based NVMe

  • Problems of crash with the series Aspire V Nitro Black Edition VN7-791

    Good so I got a nitro V Aspire as a gift at Christmas time and was pretty excited about it but there was a lot of problems with it. From the first day I got it, it crashed when running a game on high graphics. This problem persisted six months as a market shutdown problem. What happens in general, is running the game sort of lag, juttering even using the Nivida graphics, then the screen will cut to black and it turns off. If I hit the power, but it turns red lights under the keyboard for a fraction of a second but turns then off. It usually takes about 20 minutes for the laptop computer to actually turn it on again.

    It becomes just more boring as the days go by, someone else has this problem and if so how do solve you this problem?

    Hello

    You are of course is a temperature problem? It's a 791G, so it is larger than the 591G and he shouldn't have any problems of limitation. Have you tried to monitor your temperature, frequency of the CPU clock, CPU and GPU use? You should do this before assuming that is might be a temperature problem. Also are running your fans?

    If you are certain that it is a problem of temperature and your fans to operate as it is expected that you can try to use a coolingpad and change the thermal paste on the CPU and the GPU. This last suggestion will definitely improve the problem.

    However, I quite doubt it's a CPU/GPU temperature problem because in the first place it would throttle and not sudden turn off your computer. They have a lot of build protection against overheating and stopping suddenly to protect components is the last option of these protection mechanisms. Honestly, I expect that you have some sort of other problem or for a reason, that your fans do not work correctly, or you have a lot of dust in the cooling system.

    I use my 591G (4720HQ and 960M), and even when I do intense Bioinformatics (using the GPU for the calculation of all cores of CPU, at 100% use) I never had the problem with the stop suddenly. And believe me no game can put such stress on your phone except comparative analysis of the applications. I have problems with regulating heat, but never had a problem with the sudden stop and is a smaller laptop with less space, so smaller air flow and worse cooling than the 791G that has the same configuration.

  • Acer Aspire V15 Nitro Black Edition - Windows 10 drivers (touchpad / IO)

    The touchpad drivers install but do nothing, I saw a post saying install IO drivers, but those who do not install. Choose my laptop, then Windows 10 64-bit model and download the IO drivers, they say "supported system no. None of these drivers seem to work, how to make this work?

    The laptop came with installed 8.1 and I improved however, the hard drive has no 'end-to-end error' so I replaced it with another portable drive. When I upgraded to 10 8.1 the touchpad worked. I know that the touchpad is not broken or disabled insofar as it works very well on my linux install.

    Have you tried to press Fn + F7?

    on Device Manager, click the view tab, select Show devices and check again on the touchpad.

    I would also check on the connections of ribbons on your mobile, because you or someone has changed the HARD drive and perhaps forgotten or loose something.

  • VN7 - 791 G (v17 Nitro Black Edition with GTX860) can cause a second hard drive?

    As the title suggests, can my (v17 Nitro Black Edition with GTX860), VN7 - 791G just to confirm before you buy an and open sound. I see that some of them came with an SSD, but me, has no it still the possibility to add a?

    Thank you!

    It has an open slot m2 inside, or you can replace the HDD with a SSD.

  • My Acer Aspire v 17 Nitro Black edition doesn't recognize my built in camera

    My Acer Aspire v 17 Nitro Black edition doesn't recognize my built in camera. And also on Device Manager I do not find the Image device where I should find the camera

    Hello...

    If you have already tried the factory reset, it might be a hardware problem with the webcam. In this case, you will have to send the laptop for repair.

  • VN7 - 591 G-70RT: installing RAM and SSD m2

    Hi - I recently bought Acer Nitro VN7 - 591 G-70RT and have a few questions about the SSD upgrades

    (1) m2 SSD: can any SSD m2 fits into the SSD slot, I think that the length of the SSD should be 3.15 however can someone please confirm if below SSD is compatible on my Acer laptop.

    http://www.Amazon.com/Samsung-850-Evo-250-MZ-N5E250BW/DP/B00TGIVZTW/ref=sr_1_1?s=PC&ie=UTF8&QID=1441...

    (2) Ram upgrade: upgrading ram is quite difficult involcing withdrawal of the motherboard together, does someone at - it a video guide I can return.

    (3) 2.5 INCH SATA SSD: sometimes down the line, I will be upgrading the SSD HARD, I need to examine particular SSD? or will and SATA III SSD won't work.

    Hello

    M.2 PCI-e work? or is it only M.2 SATA III. The product on the amazon link will be compatible?

    1 M.2 SATA III (SATA 6 Gbps Interface, compatible with SATA 3 Gb/s & SATA 1.5 Gb/s interface)

    2. Yes, it is compatible and it is one of the best SSDS on the market.

    3 Samsung MZ-N5E250BW - 850 EVO m2 250 GB SSD

  • Hi, install SSD on Acer Aspire VN7 - 591 G-70RT and setting for the primary boot device?

    Hello

    I have an Acer Aspire VN7 - 591 G-70RT that came with a Western Digital blue 5400 RPM HARD drive which is limitation of my performance of laptops. I contacted Acer recently to ask for upgrades that might be made and they confirmed that I could build an SSD 256 GB and up to 16 GB of ram.

    I bought an SSD now and install, but I wanted to ask how I could continue on the definition of the SSD as my main drive.

    At this point, I guess I could install the SSD, then select it as primary boot device in the BIOS by pressing F2, and then install windows 10 via my USB. If this should be good to reboot or the existence of windows on my current HARD drive causes a conflict?

    Thank you

    I have the device works now and here's what I did.

    WEAR AN ANTI STATIC BAND:

    Step 1) remove all the screws on the underside of the laptop

    Step 2) use spudger or credit GENTLY lift a gap between the keyboard and the base, then use the credit card to slide slowly into the space to jump open clips, NOT FORCE.

    Step 3) (OPTIONAL) remove the keyboard connectors by moving clip and gently remove the cable from the Jack. However the HARD drive slipped in for me without necessary to detach.

    Step 4) unplug original WD HDD blue reversing the clip and disconnect the cable

    Step 5) close laptop together and boot with Windows 10 USB install

    Step 6) install windows on new SSD (for me windows automatically activated via the BIOS/UEFI) if it doesn't happen for you, simply re-attatch the original HARD disk.

    Step 7) if the activation is successful, again set HARD drive and original format. I have kept all the original ACER RECOVERY and Partitions (Healthy) in case I need to restore factory default, but formatted primary partition.

  • Power cord for Acer Aspire V17 nitro-Black Edition.

    I have a new edition of nitro-black Acer Aspire V17. I need a power cord for the load and be able to save when traveling in my RV I got Acer is "we don't sell them. Anyone know where I can get one? I know the Volt and amp of the AC charger specifications but the plug that plugs into the computer is higher than normal. I'd appreciate any help I can get.

    Thank you

    http://www.Amazon.com/GPK-VN7-791G-71P5-VN7-571G-79YU-VN7-791G-7484-VN7-791G-78VM/DP/B00S8BTPGI/REF=...

Maybe you are looking for

  • What size 9.3.4 for iPhone iOS?

    I have a very limited data plan. What is the size of the download for. 9.3.4 IOS for the iPhone? I just iOS 9.3.2 with an iPad Mini 2. Thank you V-

  • Deletion of snapshots via SSH

    I have a RN102 with 2x3TB red WD leads to XRAID2. I deleted all my photos except one (instant action is 191 GB). However, snapshots take up a lot of space: He has not recovered "over time", so I thought to delete manually via SSH. My gaze of 5 action

  • How about using labview vi of the filter and multiply vi to replace the analog filter and amplifier

    Hi all I use a data acquisition system to acquire a weak signal, it seems to a voltage amplifier and low-pass filter before the acquisition of data. I was wondering, if I use low-pass of the labview vi of the filter and multiply vi to process the sig

  • NI9411

    Hi all I am wanting to associate this flow sensor: http://vvfs.dk/www/webshop1/images/CKEditor/files/VSG1, 5A - engl.pdf for my NI 9411 digital input module. The sensor sends a pulse for each 0.5 L i.e 0.5 L/pulse and I want to read using the form ab

  • Newly created profiles don't be loading not/are not created properly

    Windows Server 2008 R2 I have an administrator account that works. I wanted to start earning several accounts for others to use, but met with questions. Any profile that I create (standard or admin) cannot connect. I get the "Profile Service could no