ISA 550W: Youtube streaming stops after a few seconds

Similar Questions

• Remote Desktop connects then stops after a few seconds

  I have two laptops to Windows 7.  We run OpenVPN which I will refer to the VPN server.  The other is the Client and with me on trips.  Open VPN is configured on the Client and the VPN server, and I can connect from inside and outside the network without any problems.  I also have an Open VPN Client with another port configured on a server QNAS.  I can connect without any problems.

  I want to run the OpenVPN server on one VLAN separated to prevent users to see my internal network and only sees another NAS.  I also use the VPN to offer our few users (3) the ability to connect and use my static IP address.

  I have a router TP-Link-ER-6120.  I can configure the three ports to run in 3 separate VLANS.  When I configure the VPN server works on my regular network to exploit the VLAN1 and VLAN2, I can always connect to OpenVPN and all I want to do works (NAS and Internet access with my static IP).  However, when I try to establish a Session to the VPN server computer remote desktop, I get the login and enter my user name and password.  I see the remote desktop window, open and usually see the remote desktop wallpaper and loading the desktop icons.  Then it crashes.  If he does until I can see the desktop, it automatically attempts to reconnect.  If she makes it that far, it stops with a window that says Remote Desktop connection has been disconnected.

  If I come back in the configuration of the router and change the configuration of VLAN for the server VPN is on the same virtual network, I can connect and the remote desktop connection is successful, as long as the customer is located on my network.  If I connect the Client to the VPN server from outside my network in this configuration, the remote desktop will always fail in the same manner described above.  I also have a QNAS on my network with OpenVPN configured and operational.  If I connect the Client computer to the QNAS, I can connect to the VPN server until the VPN server is placed in its own VIRTUAL LAN.

  Thus, work Desktop connections to local computers.

  However, since a remote off-grid remote office connections begin to work, but are stopped when connecting.

  -J' I ping the VPN server during connection attempts and never lose the connection.

  -J' used telnet to Server VPN 3389 port and it connects.

  -J' turned off the firewalls on both sides and went up to remove Symantec on the VPN and BitDefender server on the side side Client to use Windows Firewall on both.  And then disabled Windows Firewall as well and still no joy.

  Is there a setting in Windows I'm missing that allow the desktop connection remote on the LAN, but not enable during login remotely even if I can ping, telnet and usually access the rest of the network?

  Is it maybe a configuration problem on the side of the router?  Installation side route is a very simple graphic interface.  I configured for the VPN service roads and they remain in place (one for the QNAS) and one for the OpenVPN server.  I set up a static route (virtual server) for port 3389 go directly to the IP address of the VPN server, but that did nothing.

  Miss me probably something simple, but it launched my ass for weeks now.

  Any ideas?

  Hello Michael,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with remote desktop connects and then stops after a few seconds on the system.

  Certainly, I understand your concern and will try my best to help you.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Audio playback starts and stops after a few seconds

  original title: Audio playback

  By my speakers (Windows 7) starts and stops after a few seconds.  I have troubleshooted but found no problem.  I configured and tested with good results, but the problem persists.  Anyone else know this or knows how to solve the problem? PLEASE HELP :)

  Hi NuttyNetty444,

  If you have not already the case, follow the steps in this document. This should solve most common sound problems in Windows.

• Do not get the audit trail for oracle solaris running. It starts and then stops after a few seconds. How can I set up a secure target Oracle Solaris? cure

  I have installation BSM on my solaris 10 Server. I configured BSM to be sent to syslog. I registered my target secure on the server of the AV type Oracle Solaris. Add an audit trail of pointing to the syslog file. The Audit Trail starts and stops after a few seconds. the error I get from the agent log is

  [2014 11-25 T 11: 36:38.647 + 02:00] [collfwk] [ERROR] [] [] [tid: 10] [ecid: 192.169.1.50:11353:1416908198895:0, 0] FVO-8015: initialization of the instanceCollectionController AuditEventCollector error: run: process() Exception. [[

  Instance of Error initializing AuditEventCollector

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:322)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  Nested exception:

  java.lang.NumberFormatException: for input string: "invalid audit trail: / var/adm."

  at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

  at java.lang.Integer.parseInt(Integer.java:449)

  in java.lang.Integer. < init > (Integer.java:660)

  to oracle.av.platform.common.exception.AuditException. < init > (AuditException.java:118)

  to oracle.av.platform.agent.collfwk.AuditEventCollectorException. < init > (AuditEventCollectorException.java:59)

  at com.oracle.solaris.SolarisCollector.initializeCollector(SolarisCollector.java:86)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:316)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  ]]

  [2014 11-25 T 11: 47:49.248 + 02:00] [collfwk] [ERROR] [] [] [tid: 11] [ecid: 192.169.1.50:11353:1416908869249:1, 0] FVO-8015: initialization of the instanceCollectionController AuditEventCollector error: run: process() Exception. [[

  Instance of Error initializing AuditEventCollector

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:322)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  Nested exception:

  java.lang.NumberFormatException: for input string: "invalid audit trail: / var/audit.

  at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

  at java.lang.Integer.parseInt(Integer.java:449)

  in java.lang.Integer. < init > (Integer.java:660)

  to oracle.av.platform.common.exception.AuditException. < init > (AuditException.java:118)

  to oracle.av.platform.agent.collfwk.AuditEventCollectorException. < init > (AuditEventCollectorException.java:59)

  at com.oracle.solaris.SolarisCollector.initializeCollector(SolarisCollector.java:86)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:316)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  ]]

  Can you please help with instructions/solution implementation of Oracle Solaris secure target? A beginner in Audit Vault.

  I have the installation path for the database and which works very well

  concerning

  Thanks for the pointers. After you add hostname to the location of the trail, the audit trail is running

• 17 flash drive: videos played in Google Chrome stop after a few seconds

  Hello

  all the videos played in Google Chrome, stops after a few seconds after the upgrade to version 17,0,0,134 on Windows.

  Thank you

  I restart the pc and it works now, thanks.

• Sound stops after a few seconds on you tube

  Please can someone answer me

  I'm trying to HERE music of YouTube when the video star from the beginning I have here the voice after a few second of my headphones aren't here more. That will be a problem.

  Thank you.

  original title: when I used to music HERE my headset does not work, thanks in advance

  Hi ArtanLala,

  1. This only happens when you play youtube videos or videos stored in the system as well?

  2 - is playing the video without sound or images also stops?

  3. what browser do you use?

  4. what type of Internet connection do you use?

  5. are you able to get a sound from speakers?

• Satellite A110-180 - fan starts but stops after a few seconds

  Hello

  I have a Toshiba Satellite A110-180 and when I turn on the computer, the fan turns on but it stops in a few seconds and starts again in a while and stops again and starts... Then the laptop gets heat quickly.

  I bought the laptop about 5 years ago, so I think the problem is the fan or the circuit that controls the fan. Can someone who has had the same problem make sure that the fan is the problem?

  The fan part number is ATZHG000500. Does anyone know if a fan with P/N ATZHG000100 is compatible with my laptop, or if I can use another fan?

  Thanks for your help,

  Hey Wiley,

  First of all it of normal that the fan starts and after a few seconds, or 1 minute stops. Depending on the programs you run again the departure of fan after a few seconds or minutes. So, theoretically, it of normal what is happening.

  But if your laptop is almost 5 years old, you should try to clean. So I can recommend jet of compressed air. This could blow out the dust from the cooling fans. It is very cheap but very useful.
  Check it!

  In addition, I think that the thermal paste should be renewed a technicians authorized laptop can help you and answer if the other fan part number fits in your laptop. :)

• Playback stops after a few seconds when streaming, slows down after a few seconds, when I look at D/L had video offline.

  Hi all

  I'm having a bit of a hairy problem - * ANY * video streaming, whether it be HTML5 or Flash stops after a number of seconds (rare) seemingly random.  YouTube, I sometimes get a buffer wheel to turn constantly, sometimes nothing.  On Facebook or other sites, nothing happens - freeze just a video.  Internet high speed or bandwidth is not a problem - 50/50 FiOS here.  Sound œuvres until frost.

  I tried to download videos in FLV Downloader, but when I look in the Media Player, they slow down until they are very bad after a period similar to the streaming video.  His work sometimes until the downturn, sometimes does not at all.  VLC plays the video at the right speed, but without the sound.

  I tried deleting and re-installing flash player, run a restore point when the video was working and all the other stuff I tried, but nothing worked and I'm stuck.  I have no idea how to solve this problem.  It happened randomly yesterday (apparently).

  If anyone has any ideas, I'd appreciate a helping hand.  I am a student that takes about half of its classes online, so without flash or HTML5 video, I'm in all sorts of trouble.

  Thank you

  Matt

  * edit * on a whim, I just open Spotify to see if that would work.  No bone.  Nothing plays.  Not at all.  The music does not play in Media Player, (local or streaming)

  Well, it seems I solved the question - I have no idea why this is happening.  I have a Logitech G35 Headset.  Sometimes when I restart Windows, I get sound out of it (usually noticed during a Skype call).  If I unplug and re - connect the headset, everything is hunky-dory with the sound and Skype.

  I just had to do, and when I did, all the videos and other media began to work very well.

  I'm cursed confused.

• Windows import video repeatedly stops after a few seconds when you use DV cam to convert and import analog videos

  With the help of a Canon Elura 40 mini DV camera to import my old Video 8 tapes to the .avi format. I followed the instructions from http://windows.microsoft.com/en-US/windows-vista/Import-analog-video-to-your-computer-by-using-a-DV-camera . However, when I click Start import import will work only for a few seconds and then stops. If I keep restarting after that it stops every time (5 to 10 times), I finally get a message under the controls of cam DV that says "commands does not. Then it will keep the import without problem. I discovered this solution accidentally, but not knowing when it will eventually continue to record does get the departure point. If I import directly using a digital camera 8 this is not the case, but the Video 8 does not play well on the Digital 8.

  Thank you.

  Hello

  Method 1: You can follow the steps described in the article below that addresses this question

  Error message when you try to import video clips from a device on a Windows Vista-based computer: "the import device is not responding.

  http://support.Microsoft.com/kb/922977
  

  Method 2: you can follow the steps mentioned in the link below

  
  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

• Adobe Acrobat stops after a few seconds

  Hello

  Recently, some of our users are problems where Adobe Acrobat Pro XI (11.0.16) stops after having been open for a few seconds.

  OS: Windows 8.1

  What I tried:

  • Removal tool including vacuuming (Download Adobe Reader and Acrobat tool - Adobe Labs ) can clean installation
  • Removal and remove manually the remaining records in C:\User\username\appdata\roaming, local and locallow, removing everything related to Adobe acrobat form the HKLM\Software and HKCU\software... then clean install
  • Adobe running with administrator privileges and it runs under a different user account
  • Removing and installing a version previous (11.0.05), which had the same stop to unextected
  • Removed the preferences as described here How to reset preference settings in Acrobat format.  (Note that he had no new folder preferences created after moving the former again and start Acrobat)

  So far, I have still no idea why this happens and how to solve it. I hope you can help.

  Thank you

  Thijs

  Hi thijsm96483536 ,

  He did up no error message when it stops? If so, please let us know.

  Also, please try referring to this link: Acrobat XI hangs at startup

  Let us know if that helps.

  Concerning
  Sarojini

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• * Media Player stops. My drive stops, then recovers itself after a few seconds. Screen goes black for 1-3 seconds, BUT Audio continues!

  I have Vista Ultimate, but I'm not very smart PC!   When I try to watch a video clip, etc., SEE above EDIT.  My drive stops, then recovers itself after a few seconds.  Screen goes black for 1-3 seconds, BUT Audio continues!  Then Visual back for a while until that the same thing never happens again anywhere!  Also the FAN spins-up like a jet plane taking off!   Help, please.  Thank you.

  Hi Peter,.

  1 have had any changes made on the computer before the show?

  2. which media player you use to play the video?

  3. the problem occurs on all the video clips?

  I would say as update you the video card drivers and check if the problem persists:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please respond with more information to help you best.

  Thank you.

• FM Radio stops after a few minutes

  Hello

  recently I have updated my OS to 6.0.1. After that, my fm radio app stops after a few minutes.

  I launched this safe mode. In safe mode, it the application runs without problem.

  So, I think, another application using the speaker. Am I wrong?

  What is the problem? How can I solve this problem?

  Thank you

  the problem is solved with the last update...

• 9:layers Photoshop Elements are not visible on panel - stops after a few minutes of work

  My photoshop stops after a few minutes of work.  My layers are not visible on the Panel.  There should be at least 11 layers for this card in image.

  Please help - my business depends on this program!

  I'm sorry. To PSEv.9, follow these steps:

  WINDOWS

  Step 1. Hold the Alt, Ctrl + Shift keys when you click the icon to open

  Elements. When asked if you want to delete the settings file, say Yes.

  Step

  2 reset the preferences as above.

  Step 3. Close the items and let the file

  regenerate.

  MAC

  Step 1. Hold down the Opt, Cmd + Shift pressed as

  You can click the icon to open the items. When asked if you want to remove the

  file settings, say Yes.

  Step 2. Reset the preferences as above.

  Step 3.

  Items nearby and let regenerate the file.

• Stor.E access point stops working after a few seconds

  Bought a Stor.E wireless adapter and followed the instructions but after turn on the unit by connecting to USB power usage provides cables, access point WIFI disconnects after 4 or around seconds.
  1. I connect to usb power
  2. the indicator flashes in green and stays on
  3. wireless light turns green and stay on, turns off after a few seconds

  Managed to connect using the mobile app several times, while its sequel, but given that the WIFI point disconnects, can't use it.

  Any thoughts?

  1. I connect to usb power

  Stor.e wireless adapter must be connected to the power supply and the other end to the external HARD drive.

  

  Then, you can use the application to access the wireless content.