Isass.exe failed to initialize properly, click on ok to terminate the application (OXC0000005)
I am running windows XP 32-bit (windows XP (R) (Build 2600.XPSP_3_gdr.101209 - 1647: SP3 & IE8) and had no problems at all until I decided to have a good wipe and reinstall XP.) I have a recovery disk only.
See this: http://en.kioskea.net/forum/affich-87892-lsass-exe-and-services-exe-application-error
Tags: Windows
Similar Questions
-
Had this feature Sharper Image 5 days weather for Christmas and of course we have over-paid for her-$50 bed bath & beyond. I'm not as technical as most of you, but I am unable to even get the software to install. I get an application error installation "the application could not initialize properly (Oxc0000135). Click on OK to terminate the application. "I got the Version 1.01 in the box (and it does not say is the app forecast 4 days) and am running XP. Thanks in advance for any help - of course, the is Helpline is to give an ambiguous 'we are closed for the holidays' without parameters for the last seven days... Grrr...
Sure that the error occurs when you don't have a .NET framework is installed on your system. You can download/install here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26
-
I installed live messenger on windows xp. above failure appeared. and messenger does not start. pl help.
Hello samadabdul,
There is a forum for Windows Live products. Please re - ask your question in the forum below for Windows Live Messenger.
http://windowslivehelp.com/product.aspx?ProductID=2They will be better able to solve your problem.
Thank you
Marilyn
-
Has anyone received this message at startup in Vista?
Hi,
(1) since when are you facing this problem?
(2) remember to make changes?
Method 1: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833 -
Original title: need help please
Ive had an application error, ibrytdesktop.exe. Note ISC, the application failed to initialize properly (0xc0000135), click ok to close the application. Can this happens whenever the computer is on how I fix
Hi petrospapamihelakis,
Looks like one of the installed program on the computer has been corrupted.
· Have you checked the problem in safe mode?
Step 1: Try to start in safe mode to see if you get the error.
Step 2: If he is able to start very well without any errors, and then try to try perform a clean boot to normal mode to check whether a third-party program is causing the problem.
How to configure Windows XP to start in a "clean boot" State
You can also read the following article to resolve the problems on the issue.
Perform a clean boot to determine if background programs interfere with your game or program.
Note: Make sure that you put the computer to a Normal startup once you are finished.
-
Explorer.exe - application error failed to initialize properly (0xc0000022)
Help!
I don't have any idea what to do! my computer is not working the 'start' box disappeared also a text box comes up saying error explore .exe-application failed to initialize properly (0xc0000022) click ok to finish then all I get is a black screen. I tried to restart and it says it is update 1 of 3, then stops, but when you next turn to the new it still does not work.
Hello
that is 'safe mode' - did you try to run?
How to run WIndows Vista "safe mode" is here: "".
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
and in 'safe mode' (if it works) try to run "System Restore":
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
part
How to start the system restore?
LC
-
The appilcation failed to initialize properly (0xc000007b). Click OK to close the application.
Help please. My computer has been infected by a virus some time ago. I have cleaned the virus and now get the following message is displayed.
Running Vista Home Basic Service pack 2 32-bit system.
In particular I am getting kind of Spider solitaire, but I think I've noticed this on other games/programs of microsft preinstall.
I have run chkdsk /f and / r but still have the same problem. Thank you in advance.
Hello
It happens with any application?
Method 1: You can also put the computer to boot and check if any third-party application is causing the problem:
http://support.Microsoft.com/kb/929135
Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: I suggest you to run the SFC scan to make sure that the system files are intact:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Check in the case where the Viewer for any question regarding newspapers
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
-
exe application 0xc000007b application error failed to initialize properly on startup.
Original title: exe application 0xc000007b error
Hello
When I start my computer, I receive. (exe application error the application failed to initialize properly 0xc000007b)
Thank you
James
Hi James,
1 - is the complete error message you receive?
2. did you of recent changes on the system?
Check the behavior by starting the computer in a clean boot state.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
If the problem does not persist, you can continue with step 2 from the link above.
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
Hope this information is useful.
-
STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005). Click OK to close the application.
Occurs when I try to restart my laptop and ends the boot process.
03/08/11 I get this same error, and I see that nobody has answered it yet. DPR anyone has any idea other than a new image for this problem?
Rodolphe/Spyware/Malware infection, blue screens don't have an option to click OK to finish or even forget that you can click on anything. If you do not work in safe mode or even last known good configuration you can try a repair installation, but you can still loose data like that. I would just pull the information you need out of the HDD using a speaker and then wipe and start over from scratch. Don't forget to scan your files if you do not import everything using a speaker. However if you can access the mode safe mode with networking, try to download malware bytes and running (don't know how its spelled) it will remove files such as _is27.exe which is a (Rogue.Installer).
-
I had to install a new hard drive after the death of my old. I use my Dell recovery/reinstallation disk. The first time I tried installing that it froze after the reboot. I then did a repair installation (twice) and each time got the following error:
PxShare.exe Application error.
The application failed to initialize properly (0xc000135). Click OK to close the application.
It appears at the end of the installation, but when my login screen is displayed, it shows only one account, administrator and request a password. I have not configured any accounts when I did the installation and you do not have a password. I tried to enter without password, using admin as password and check-in safe mode did not help - it still asked for a password.
I don't know if the two problems are related or not.
Thanks for any help!
Hi Lowery619,
(a) If you have external devices unnecessary connected to the machine, unplug them.
(b) thereafter, you can try reinstalling Windows XP.
For more information, please visit this link: install, reinstall, or uninstall Windows
Hope the helps of information.
Please post back and we do know.
-
How solve this error message application failed to initialize properly 0xc0000005 on start up
Hi my name corri I have a computer laptop advent. When I start my laptop it goes to the widowed loding fine screen but then when it goes beyond this point he then goes to this error message
(application failed to initialize properly 0xc0000005) then I click on ok, then it is once again, then I click ok again then it goes. then after it will theres just a blank screen without icons or nothing... I can't even open Task Manager some can help me please solve it!
Hello
You can try the steps below and check if that helps. You need the Windows XP installation CD to go forward with the steps below.
(a) use the Recovery Console, which is described in the article below.
http://support.Microsoft.com/kb/314058Note: You must make sure that your primary boot device is CD drive - go into the BIOS to ensure, if necessary,
(b) (b) demarrer start from the Windows XP installation CD-ROM, and then use the EXPAND command, like this:
Expand d:\i386\wininet.dl_ c:\windows\system32\wininet.dllNote: Where d: is the CD-ROM drive
(c) then type EXIT and when the pc reboots, you should be able to boot XP.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hi, I have a problem with this application. What happens is, every time I close my my office an error message:-l' app could not if initialize properly (0xc0000142) click on OK to close the application.
Hope you can help me as soon as possible.
Thank you.Hello Mario,
To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
- Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the command sfc/scannow. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
Hope this helps you. Let us know anyway. Make it a great day!
"And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)
-
If I update to windows 7 it will fix error application failed to initialize properly?
When I try to open certain programs I get application failed to initialize properly.
I want to know if I upgrade from Windows Vista to Windows 7 will be the mistake still be there?
Will he take it?
Thank you
Mildred W.
Hello
1. Since when are you facing this problem?
2. don't you make recent changes?
3. What is the full error message?
4. what programs you try to run?
If you upgrade Windows Vista to Windows 7, once again depends on what program you use. If there is a problem with this program, you could get the same question.
If these programs are third-party programs, so I suggest to uninstall and reinstall once and check to see if the same problem happens.
Alternatively, you can also try to restore the computer to an earlier point and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
It will be useful.
-
First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please!
Hi RC,.
Update first Pro CC 2015 (9.2).
Thank you
Kevin
-
I try to install Yahoo Mesenger and it keeps giving me a pop-up Microsoft Windows.The error is the following: could not initialize properly (0xc0150002). What could be the problem?
Hello DennisUSMC,
Look at the thread in Yahoo Answers.
http://UK.answers.Yahoo.com/question/index?QID=20091129190055AA1nEspHe suggested to uninstall other versions of Yahoo messenger before installing the latest version. If it does not help to solve your problem, then go to Yahoo support.
http://help.Yahoo.com/kb/index?locale=en_US&page=product&y=PROD_MSNG&PIR=qWKr06VibUkWf.Qpynpw1MiIKLy_mnW1Xh_iz.es9b2DJRQQvLHTQmISincerely,
Marilyn
Maybe you are looking for
-
Pages do not correctly print from Firefox
When I try to print from Firefox, pages of tiny print. I have read several support articles that talk about change margins in Page Setup, but I can not FIND the Page Setup. Unless I'm completely oblivious, that the new update of Firefox has removed t
-
It's probably very easy to understand this and to uninstall the updates to date, but, well, I am slightly tech-illiterate! I use my Norton Toolbar a lot for the sites I visit frequently, and this no compatibility issue is the same reason I stick with
-
Error 10461 / 10008 @ DIO Port Config (legacy, lvdaq.dll)
Hello! In my company, we have many tests in Paris, all controlled by an extraordinary Labview (compiled) program and the PCI-DIO-96 cards. I changed and compiled the program several times in the past and did not have a unsolvable problem before. But
-
My keyboard has suddenly decided to re set
My keyboard has suddenly decided to re set! Now when I press the @key I get "and the opposite is true, that is, when I press on" get? How can it be reectified as this seems to be only on those 2 keys?
-
Where can I put ringtones in Zune to put in my phone?
I am usin a quantum phone, I got the ringtones I want to use with it from my old phone. I transferred put them that they propose that the music doesn't let me do anything else with them. I want to transfer in Quantum phone to use as ringtones, anyon