ISE and WLC for CWA (Web Central Auth)

Similar Questions

• ISE and WLC for sanitation of the posture

  Please can someone clarify a few things regarding the ISE and posture wireless.

  (1) is the ACL-POSTURE-REDIRECT used for conversion, or is it just an ACL to redirect some of the posture of the kickoff checking traffic?

  (2) can / a dACL/wACL list must be specified as a sanitation ACL?

  (3) the WLC ACL should be written in long format (manually specify source and dest ports/doesny direction any job?)

  (4) does anyone have working example ACL for redirect (CPC) posture and sanitation (dACL)?

  (5) any other advice or pointers would be as useful as any docs I have found so far, what he TrustSec2, CiscoLive or anything else, do not seem to help me understand sanitation and WLC posture

  Thank you

  Nick

  Yes,

  This means that strategy available to your customer does not have a rule that will correspond to an entrepreneur who joined the network. Can you post a screenshot of the provisioning of customer policy?

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• I need to create combinations of text and images for the web. How to do this in elements or do I need Photoshop for this feature?

  I need to create combinations of text and images for the web. How to do this in elements or do I need Photoshop for this feature?  Please advise!

  slynn5236 wrote:

  I need to create combinations of text and images for the web. How to do this in elements or do I need Photoshop for this feature?  Please advise!

  You can do in PSE.

  1. Do the math to see how much space you'll need on your canvas to the image and text.
  2. Navigate to the file queue > new.blank. Enter the width & height, background color, resolution 72 px / in. It is your canvas, and in the layers palette will be the background layer.
  3. Copy and paste the image. It turns on a separate layer
  4. Activate the tool move, position the image and resize if necessary
  5. Activate the text tool, and then type your text. It will be on a separate so layer
  6. Position the text.
  7. Flatten layers and go to file > save for web. I'm usually on the long side about 800 px. Don't forget to check "constrain proportions". Adjust the quality slider to suit. You will probably want the type of JPEG file for web work.

• Guest access with ISE and WLC LWA

  Hi guys,.

  Our company try to implement access as guest with dan ISE WLC with the local Web authentication method. But there is problem that comes with the certificate. This is the scenario:

  1. the clients are trying to connect wifi with guest SSID

  2. once it connects, you can open the browser and try to open a Web page (example: cisco.com)

  3, because guests didn't connect, so this link redirect to "ISE Guest Login Page" (become): url

  https://ISE-hostname:8443/guestportal/login.action?switch_url= https://1.1.1.1/login.html&wlan=Guest&redirect=www.cisco.com/

  )

  4. If there is no Login to ISE not installed comments Page, no reliable connection of message message, but it will be fine is they "Add Exception and install the certificate".

  

  5. once the Guest Login Page will appear and you can enter their username and password.

  

  6 connection success and they will be redirected to www.cisco.com and there pop-up 1.1.1.1 (IP of the Virtual Interface WLC) with the logout button.

  The problem occur in scenario 6, after the success of the opening session, the Web page with the address and the error of certificate ISE IP to 1.1.1.1 is appear.

  

  I know that it happened when you can has no Page of Login of WLC certificate...

  My Question is, is there a way of tunneling WLC certificate to EHT? Or what we can do for ISE validate certificate WLC, invited didn't need to install the certificate WLC / root certificate before you connect to the Wifi?

  THX 4 your answer and sorry for my bad English...

  Do not mix WLC with ISE comments Portal local Web authentication. Choose one or the other. I suggest the portal + WLC CWA.

• Cisco ISE and WLC Access-List Design/scalability

  Hello

  I have a scenario that wireless clients are authenticated by the ISE and different ACL is applied depending on the rules in the ISE. The problem I have seen is due to the limitation on the Cisco WLC that limit only 64 input access list. As the installer has only a few IVR/interfaces and several different access lists are applied to the same base on user groups interface; I was wondering if there may be an evolutionary design / approach according to which the access list entries can evolve next to create a vlan for each group of users and apply the access list on the interface of layer 3 instead? I illustrated the configuration below for reference:

  Group of users 1 - apply ACL 1 - on Vlan 1

  User 2 group - apply ACL 2 - on the Vlan 1

  3 user group - apply ACL 3 - on the Vlan 1

  The problem appears only for wireless users, he does not see on wired users as the ACLs can be applied successfully without restriction as to the switches.

  Any suggestion is appreciated.

  Thank you.

  In fact, you have limitations on the side of the switch as well. Long ACL can deplete resources AAGR of the switch. Take a look at this link:

  http://www.Cisco.com/c/en/us/support/docs/switches/Catalyst-3750-series-switches/68461-high-CPU-utilization-cat3750.html

  The new WLCs based on IOS XE and not the old OS Wireless/Aironet will provide the best experience in these matters.

  Overall, I see three ways to overcome your current number:

  1. reduce the ACL by making them less specific

  2 use L3 interfaces on a switch L3 or FW and the ACL is applied to them

  3. use the SGT/SGA

  I hope this helps!

  Thank you for evaluating useful messages!

• WRT54G2-Lost username and password for router Web page

  When I type in my router (WRT54G2) Web page he asked me a username and password as usual.  But my problem is that I forgot my username and password.  So, how would I be able to find it or reset it?

  You need to reset the default router by pressing the reset for 30 seconds button... There is no other way if you forgot the password...

• How to register more than one user name and password for a Web site?

  First of all, let me say that I am extremely irritated that I just spent 15 minutes written a very detailed question and researching my OS, browser version, etc., as all have cleared because I don't "check" my e-mail address before I started typing my question. Firefox: correct your registration and the issue of the accounting process so that this happens. He should keep your info for a smooth running of the process, after checking. What a waste of time and effort when I'm already frustrated.

  REAL QUESTION: I managed two calendars online under a single root URLS (www.samplepage.com/calendar1 and www.samplepage.com/calendar2). My e-mail address is the user for both accounts ID, but passwords are different.

  FF used to associate ALL of the URL of your user name and password, but now it combines only the root (www.samplepage.com). So, for me, will remember only one password.

  How can I get to remember TWO passwords?

  Thank you!

  This is not possible with the Firefox password manager. You can only save a user name and password once for a specific field, so if the name is the same then it does not work.

• where windows store the passwords and ID for various Web pages?

  When entering a new page/account window has a "combo" that asks you if you want to save this password... I would like to know where they are stored or how I can remove one if I choose to... Thanks for any help

  Depending on whether your computer is on a domain or not (if you are unsure, it is probably not) try one of these KB articles:

  «How to manage stored user names and passwords on a computer that is not in a domain in Windows XP»
    <>http://support.Microsoft.com/kb/306541 >

  «How to manage stored user names and passwords on a computer in a domain in Windows XP»
    <>http://support.Microsoft.com/kb/306992 >

  HTH,
  JW

• What size and resolution for the web

  Don't know what size and resolution I should I save my photos to FB.  Any suggestions?  AND I can do LR or what I have to go to the PS

  Thank you

  Alisa

  The resolution setting has no effect on the image. No matter what the resolution is fixed to, the pixel dimensions will remain the same. When I post photos on Facebook, I usually export copies with size defined for the long edge of 1000 pixels. Maybe it's a little too big. But you can set the resolution to 72, 96, 300, 600, etc., and it will affect the size or quality of the image.

  And, Yes, you can use Lightroom to export copies to publish on Facebook. In fact, if you set up your publication options, you can post to Facebook directly from Lightroom and not even had to worry about the size.

• Needing a stop and proofreading for video web banner button

  I created my first web banners using full-motion video (flv). Must be less than 40 KB by the requirements of the site.

  I could finally go down the size of my file avoiding the FLVplayer and using ActionScript (not my area of expertise).

  I managed to get the basic work and play video, but I need to add a stop button and a play button (or go back to the original static image with the play button) at the end of the video.

  Here's the code I managed to piece together thanks to Google.

  inv_btn.addEventListener (MouseEvent.Click, onReleaseMyButton);

  function onReleaseMyButton(event:MouseEvent=null):void {}

  var myVideo:Video = new Video (300, 170); see the video size

  addChild (myVideo);

  var nc:NetConnection = new NetConnection();

  NC. Connect (null);

  var ns:NetStream = new NetStream (nc);

  NS.client = new Object();

  myVideo.attachNetStream (ns);

  ns.play ("http://www.dcccd.edu/images/DCCCDlogos/flash/welding.flv" "");

  }

  use:

  to stop your video

  NS.pause ();

  to reactivate your video

  NS. Resume();

• ISE Airespace WLC ACL problem

  Hello

  I have configured ISE and WLC for use with CWA guestportal but there is a problem with the CoA - he won't apply airespace alc after auth to guestportal.

  1. on page authC, I configured a MAB wireless to continue if not found user and use an internal users as an identity store.

  2. on page authZ I configured a WEBAUTH as a default rule with the following:

  Access type = ACCESS_ACCEPT

  Cisco-av-pair = url-redirect-acl = ACL-WEBAUTH-REDIRECT

  Cisco-av-pair = redirect url =https://ip:port/guestportal/gateway? sessionId = SessionIdValue & action = cwa

  3. I've also configured this ACL to WLC to allow

  permit any - any icmp and dns

  allow all-to-the-ise-8443

  ise-to-any license

  This part works very well because I could redirect to guestportal and use my guest connection & pw to allow myself. The guest account has been previously generated by portal sponsor and it works too.

  4. on page authC, I use a dot1x wireless to use internal users

  5. in the authZ page I use a "if internal users: Guest can leave COMMENTS" rule

  6 rule PROMPT resembles the following:

  Access type = ACCESS_ACCEPT

  Airespace-ACL-Name = GUEST_INTERNET_ONLY

  7. this ACL is configured on the WLC allowing all unless private networks (ISE is also permitted)

  After authentication Portal comments, I see a success message and I was able to ping internet but I don't have web access. It looks like CoA and Airespace acl are not working and I continue to use my access ACL-WEBAUTH-REDIRECT-list and I see a strange error messages in newspapers WLC:

  * apfReceiveTask: 17:32:27.317 12 Nov: % ENTRY_DONOT_EXIST-3-ACL: acl.c:369 cannot find an ACL by name.

  I swear my ACL name spelling is correct and ACL-WEBAUTH-REDIRECT and GUEST_INTERNET_ONLY are on the WLC with counters more!

  I have not one point what problem could be...

  Any ideas?

  P.S. see attach for authentication log Live

  You can try "debug client" in the CLI WLC and try to connect with the customer. It you see if the WLC applies your ACL.

  Looks like this for my license - all ACLs

  * apfReceiveTask: 25 Oct 11:17:05.867: c8:bc:c8:13:4e:35 172.16.10.13 WEBAUTH_REQD (8) change IPv4 ACL 'none' (ACL ID 255) ===> 'PERMIT-ALL' (ACL ID 1)-(calling apf_policy.c:1762)

  It must be near the bottom.

  And then after all debug disable.

  Another question, you can test internet but no web access, as well as the URL?  Is DNS works after applying the last ACL?

  On this line in the log:

  * apfReceiveTask: 17:32:27.317 12 Nov: % ENTRY_DONOT_EXIST-3-ACL: acl.c:369 cannot find an ACL by name.

  I get that with CWA to work so I don't know which is linked. (for my setup)

  Concerning
  Mikael

  Sent by Cisco Support technique iPad App

  Post edited by: Mikael Gustafsson

• Designjet t520: designjet t520 default login and password for web server

  Hello!

  Which is the default login and password for the web server and how to reset the password?

  Hello
  
  As mention Rashed, there is no password to the factory.
  
  Try a Restore Factory Settings.
  
  If this does not work, go to the Help Menu and do a Soft Reset. (Don't do the hard reset).
  
  For access to the support menu press on and hold the power button for 15 seconds, or at the home screen tap home, back, home, home.
  
  Concerning
  
  Mike

• GANYMEDE conf for interface web aironet 1100

  Hello

  I have configured our access point for Ganymede and his works fine, but I still want one thing, web user interface & pass must use Ganymede.

  How can I do this?

  Thank you

  Hello

  I use a 1200, but maybe it helps.

  Via the Web Interface, I can navigate to SECURITY > Access Admin and turn on an option called "authentication server if not found in local list". After having turned it on, I can use my username and password for the Web Interface and in the Telnet program.

• Best app for the batch processing of photos for the web?

  I would like to know what is the best application for batch processing photos for the web quickly and easily. I'm a web editor and often need to resize, compress, or crop several photos and would like a quick way to configure the basic parameters and processes for example 20 pictures at once. Basically, I'm looking for something with the ability to FastStone Photo Resizer (I'm on a Mac and cannot use FastStone). I remember an once suggested graphic designer LightRoom - would that be a good idea or Adobe has something else? Or maybe not Adobe at all?

  PhotoShop seems heavy for this purpose: it is ideal to make the photo woth that much at the time, but less large to do less with many pictures at once. I know that I can implement some sort of macro-thingie, but I would like to be able to quickly change settings such as the percentage of compression or the width in pixels.

  I don't need a lot of editing tools, mostly just work in pixels, resizing, compression or cropping and save for the web in .jpg and .png - and Mac.

  I hope someone here can guide me in the right direction.

  Hi eval

  I think the best thing for you is Adobe photoshop elements, cover in simple not expensive and all what you want

  Photo Editor software & tools | Adobe Photoshop Elements 14

  concerning

• Illustrator CS4 - when I save it for the web my vectors are pixelated. Help!

  I've recently updated to CS4 (I know, I'm always late), but since when I "save for web" my vectors appear pixelated. It seems worse when I want a transparent background. My pictures are for the web and it won't.

  I have read a lot about this and can't seem to fix my problem, but here is what I tried: anti-aliasing is checked, view > preview raster, view > preview overprinting, the object > pixelation and probably a few other things. If anyone can help me with this problem it would be GREATLY appreciated! I have attached a picture so you can see what I mean. I created this schematic in Illustrator CS4 and saved for the web with a transparent background and, as you can see, it seems pixelated everywhere.

  

  jskopinsky,

  It shouldn't look like this as a GIF, but what happens if you save it as PNG24?