ISE and WLC for sanitation of the posture

Please can someone clarify a few things regarding the ISE and posture wireless.

(1) is the ACL-POSTURE-REDIRECT used for conversion, or is it just an ACL to redirect some of the posture of the kickoff checking traffic?

(2) can / a dACL/wACL list must be specified as a sanitation ACL?

(3) the WLC ACL should be written in long format (manually specify source and dest ports/doesny direction any job?)

(4) does anyone have working example ACL for redirect (CPC) posture and sanitation (dACL)?

(5) any other advice or pointers would be as useful as any docs I have found so far, what he TrustSec2, CiscoLive or anything else, do not seem to help me understand sanitation and WLC posture

Thank you

Nick

Yes,

This means that strategy available to your customer does not have a rule that will correspond to an entrepreneur who joined the network. Can you post a screenshot of the provisioning of customer policy?

Thank you

Tarik Admani
* Please note the useful messages *.

Tags: Cisco Security

Similar Questions

  • ISE and WLC for CWA (Web Central Auth)

    Hi all

    As we know that WLC (i.e. 5508) is intolerant of MAB (MAC Auth Bypass) and it supports CWA in 7.2.x.

    CWA is the result of successful MAB. So, how CWA to work for the wireless? So that means WLC support MAB?

    Hello

    The term in the wireless world is mac filtering. When mac filtering is fired, you will return the CWA portal in the access-accept.

    Don't forget to set your condition in the authentication policy to continue if the user is not found, while the device can hit the CWA default rule.

    Thank you

    Tarik Admani
    * Please note the useful messages *.

  • Cisco ISE and WLC Access-List Design/scalability

    Hello

    I have a scenario that wireless clients are authenticated by the ISE and different ACL is applied depending on the rules in the ISE. The problem I have seen is due to the limitation on the Cisco WLC that limit only 64 input access list. As the installer has only a few IVR/interfaces and several different access lists are applied to the same base on user groups interface; I was wondering if there may be an evolutionary design / approach according to which the access list entries can evolve next to create a vlan for each group of users and apply the access list on the interface of layer 3 instead? I illustrated the configuration below for reference:

    Group of users 1 - apply ACL 1 - on Vlan 1

    User 2 group - apply ACL 2 - on the Vlan 1

    3 user group - apply ACL 3 - on the Vlan 1

    The problem appears only for wireless users, he does not see on wired users as the ACLs can be applied successfully without restriction as to the switches.

    Any suggestion is appreciated.

    Thank you.

    In fact, you have limitations on the side of the switch as well. Long ACL can deplete resources AAGR of the switch. Take a look at this link:

    http://www.Cisco.com/c/en/us/support/docs/switches/Catalyst-3750-series-switches/68461-high-CPU-utilization-cat3750.html

    The new WLCs based on IOS XE and not the old OS Wireless/Aironet will provide the best experience in these matters.

    Overall, I see three ways to overcome your current number:

    1. reduce the ACL by making them less specific

    2 use L3 interfaces on a switch L3 or FW and the ACL is applied to them

    3. use the SGT/SGA

    I hope this helps!

    Thank you for evaluating useful messages!

  • Guest access with ISE and WLC LWA

    Hi guys,.

    Our company try to implement access as guest with dan ISE WLC with the local Web authentication method. But there is problem that comes with the certificate. This is the scenario:

    1. the clients are trying to connect wifi with guest SSID

    2. once it connects, you can open the browser and try to open a Web page (example: cisco.com)

    3, because guests didn't connect, so this link redirect to "ISE Guest Login Page" (become): url

    https://ISE-hostname:8443/guestportal/login.action?switch_url= https://1.1.1.1/login.html&wlan=Guest&redirect=www.cisco.com/

    )

    4. If there is no Login to ISE not installed comments Page, no reliable connection of message message, but it will be fine is they "Add Exception and install the certificate".

    5. once the Guest Login Page will appear and you can enter their username and password.

    6 connection success and they will be redirected to www.cisco.com and there pop-up 1.1.1.1 (IP of the Virtual Interface WLC) with the logout button.

    The problem occur in scenario 6, after the success of the opening session, the Web page with the address and the error of certificate ISE IP to 1.1.1.1 is appear.

    I know that it happened when you can has no Page of Login of WLC certificate...

    My Question is, is there a way of tunneling WLC certificate to EHT? Or what we can do for ISE validate certificate WLC, invited didn't need to install the certificate WLC / root certificate before you connect to the Wifi?

    THX 4 your answer and sorry for my bad English...

    Do not mix WLC with ISE comments Portal local Web authentication. Choose one or the other. I suggest the portal + WLC CWA.

  • Vista invites the login screen to enter username and password for folder during the connection

    Hi all
    I have the shared folder on XP. A few days ago I changed the password on the XP machine for the user of Vista, and now I can't connect to the shared folder, because Vista is by using the old password and didn't invite the login user name and password window. Then I try to connect from another PC with Windows7, everything goes well. Even when I change the password on PC XP Windows7 user (just quick Windows7 home screen of the user name and password, so I can enter the same username and the new password to connect successfully). Please, help me to deal with this question, suggestions or something?

    Sirdele

    Try clicking on this link below, it should help you with your problem.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-asks-enter-network-password-when/2a8e6d6f-74a1-43C7-8530-24e8522ea955

  • After restoring factory and updates for Windows 7, the system now asks passwords

    Recently had to do a factory restore on a toshiba laptop with windows 7 preinstalled top. has restarted the machine once he had comepleted and now it says Admin profile is locked and my username and password do not work


    1 - password was never set on the user profile. (Yes it may have been stupid not to do that for security, but that a person uses the laptop)

    2nd why admin profile has been locked?

    3rd - without having a password to disk or save it on a USB key, how can I get around this?

    4th - also why Microsoft charges to ask questions and get support on their own products?

    * original title - Windows 7 - had to factory restore after updating to windows 7. now, cannot connect to admin or normal user logon. said needs password. PASSWORDS were never defined for this? Please advise *.

    no disc to try this.

    Ive managed to get it to load the office by changing the settings via safe mode, but with a full restore (some missing drivers, IE the sound card), it always seems to be filled with questions. It runs terribly slow now and still doesn't let me do half of what I need to do to restore its former glory.

    at the present time, this will make a nice door stop or decoration of the table such that it cannot serve to something else other than to gather dust.

    does anyone have a suggestion on how to fix this problem that began after I installed the latest update of windows 7, 2 days ago.

    Try this:

    To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option "Repair your computer", select this option and press 'Enter' on your keyboard.

    This will allow you to start system recovery environment and access to the same tools.

    Mobile: http://www.notebooks.com/2009/10/20/improved-recovery-options-in-windows-7/

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • Two links one for VPN Site to Site and another for internet on the same router configuration

    Hi all

    I have 2 internet links an ADSL and lease terminated on the same router. I need to configure ADSL for VPN site-to-site of HO and internet leased line dedicated for all users.

    my site IP subnet is 10.10.100.0/24 and HO subnet is 10.1.0.0/24.   Please find attached Config and advice it will be OK and works fine

    Thanks in advance...

    Mikael

    Hello

    For me, it looks like it has configured the route correctly;

    ip route 0.0.0.0 0.0.0.0 fastethernet4 -> for all traffic to the internet.

    Road 10.1.0.0 ip 255.255.255.0 Dialer1 -> for vpn traffic to HO.

    The public_IP_HO must be defined according to the map of encryption using the set by the peers command.

    I want to add is on the isakmp policy hash attribute, you can choose between sha/md5 or whatever available on your device. Make sure that the isakmp policy to match political isakmp of your HO.

    The other thing is the acl for the internet. You may want to consider replacing the deny statement if you want to deny traffic only to your jar currently it is said to deny all traffic 10.10.100.0 10.0.0.0 network, not to the 10.1.0.0 HO (network).

    HTH,

  • Font purchase and license for use in the book (Garamond Pro)

    I intend to design a book in InDesign and I would use Adobe Garamond with all its special supplements (Titling capitals, small caps, alternate italic etc..)

    I was about to buy the package of fonts at myfonts.com, then sign up for InDesign, but I wonder if that font is already included in InDesign and, if so, is it complete?

    Also, if I use the creative cloud can I use fonts in that I already bought licenses for?

    Finally, do I need a special permit for a book printed or which is included in the license of office?

    The three weights of Adobe Garamond Pro seem to be available to use the desktop as normal and italic by TypeKit, you can get with a subscription of the CC.

  • VMs and Macaddresses for devices on the network "VM".

    I saw several examples, which are close, but none get exactly what I want.

    I want a table with output

    (a) name of the virtual machine

    (b) mac addresses

    for each NETWORK adapter that is on the network "VM".

    I tried this:

    Get-Cluster stwamd | Get - vm | Select Name, @{N = "MacAddress"; E={$_ | Get-networkAdapter | Select MacAddress}}

    but I can't understand the exact method to only return those who is connected to the network of the virtual computer.

    a little help?

    TIA

    Object on the network are not stored in the cluster object.

    The SearchObject parameter gives a $null value, and therefore all the networks that match the filter are in the report.

    A way to do this is slightly different as follows

    $clusterName = "MyCluster" $pgName = "MyPortGroup" $cluster = Get-Cluster -Name $clusterName $clusterHosts = Get-VMHost -Location $cluster | %{$_.Extensiondata.MoRef}
    
    Get-View -ViewType Network -SearchRoot (Get-Datacenter -Cluster $cluster).Extensiondata.MoRef `  -Property VM -Filter @{"Name"=$pgName} | `  %{$_.VM} | %{
        Get-View $_ -Property Name, Config.Hardware.Device, Runtime.Host | `          where{$clusterHosts -contains $_.Runtime.Host} | `          select name, @{
                n="MACAddrsOnVMNetwork";
                e={@(
                        $_.Config.Hardware.Device | ?{($_ -is [VMware.Vim.VirtualEthernetCard]) -and ({$_.DeviceInfo.Summary -eq "VM Network"})} | %{$_.MacAddress}
                    ) -join ","            }
            }
    }
    

    The script uses the data center, to which belongs the cluster as the SearchRoot.

    Later in the script, each virtual machine host is compared to the array of the hosts in the cluster.

    But the easiest way (not the fastest) is something like your original script.

    $clusterName = "MyCluster" $pgName = "MyNetwork"
    
    foreach($vm in (Get-Cluster -Name $clusterName | Get-VM)){
        Get-NetworkAdapter -VM $vm | where{$_.NetworkName -eq $pgName} | `    Select @{N="Name";E={$vm.Name}}, @{N="MacAddress";E={$_.MacAddress}}
    }
    
  • How to open files .ogg and .mogg for use with the mixer?

    I have a number of files multitrack .ogg which I would like to open and remix in Audition, but I can't seem to understand how to use them with the mixer. What I am doing wrong?

    If I open them normally, the mixer is not available.

    Screen Shot 2014-06-21 at 2.58.00 PM.png

    Screen Shot 2014-06-21 at 2.59.01 PM.png

    If I insert into a multitrack session, all find themselves on the same channel.

    Screen Shot 2014-06-21 at 3.00.20 PM.png

    For you, the answer is deliciously simple. What you have here is a multichannel file and hearing will always handle so if you open it in form of wave or multitrack view. What you have to do is open in waveform mode, and then go to edit > extract channels to mono files, and he will separate your file into mono files 10 (in this case), you can place on individual tracks in multitrack view. You will be asked at some point to save these, though course.

    In situations like this, it's pretty simple. In addition (for example by sending four channels of a plugin that will only to return two channels) it does not work anywhere near as well. But for you, it should be good, I think.

  • Grep which finds quotes and review for those on the right, but only after the numbers...

    Hello

    I'm trying to find all the quotes that follow the numbers and turn them into quotes.

    I'll try to put this in a GREP style eventually, but in the meantime, I examined it with find and change.

    Here's what I did... but it does not work.

    To find it - I have a positive look behind to find a digit, then pasted into the curly quote

    Fort of change to-I found the Unicode value for the right quote.

    But it did not work ;-(

    any thoughts there!

    Babs

    Picture 1.png

    «is any sort of double quotation marks (straight, curly, opening and closing).»

    To force some sort of quote, use one of these:

    ~ {double opening curly

    ~} double closing curly

    ' ~ ' Straight

    "(Remplacez seulement) uses the typographer use quote setting (that is, if on, change to appropriate completed open or close, otherwise use the right)"

  • find the port and URL for EM after the installation of the database

    Hello

    I use the database oracle 10g on windows platform.actually I forgot to notedown URL for the Enterprise Manager after installation of my oracle database.

    now I want to access my business manager, but do not know the RL.

    can someone tell me please how to find URL for Enterprise Manager 10g database after installation? where he is saved?

    Thanks and greetings
    VD

    Hello..

    Yes, it should work... That's what I was going to write in my reply - to check the readme file. Well, I'm just having a database on my pc and the emca_date_time file contains the following lines at the end.

    CONFIG: No value has been set for the ORACLE_HOSTNAME parameter.
    November 26, 2008 18:32:47 oracle.sysman.emcp.util.ClusterUtil getLocalNode
    CONFIG: isLocalNodeDone: true localNode: null
    November 26, 2008 18:32:47 oracle.sysman.emcp.EMDBPostConfig performConfiguration
    INFO: > database control URL is http://Anand:1158 / em

    Anand

  • Firefox is very slow and lag for most of the sites I visit, cannot figure out how to fix.

    It started about a month or two it y a. almost all Web sites that I visit Firefox lag or stalls pure and simple script error messages, giving me the advice (not responding) to the top of the page or do not respond.

    I tried all suggestions that I found in help, including "Firefox uses too many resources", "Firefox crashes or does not ', and 'Unresponsive script - how to fix. I deleted the history, cookies and cache, reset Firefox, reinstalled, all what I can. I disabled all my extensions and modules one by one to see that if they touched, I took care of everything, including Firefox is updated. Nothing has changed behavior.

    Here, any help would be appreciated.

    How about a whole new profile?

    SEE: use the Profile Manager to create and delete profiles Firefox

  • Microsoft call people and ask for access to the computer unsolicited?

    I get repeated calls from this phone number 855-805-8326 claiming they are Microsoft and they should have access to my computer, so they can fix the reported problems, they have received. I hang up on them and they immediately remind me 2 - 3 times. This is the case on several occasions... and I'm sure it's a scam. Can a person check Microsoft this number and I would like to know if it's actually Microsoft or if Microsoft made even this non solicited? Thank you!!

    Hi John,.

    Please refer to the answer (answernot marked my obsolete) of bhringer here: http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/recieved-eventvwr-cold-call/0f82d183-2046-469f-a2d2-8f9fa291f082#LastReply.

    Good luck and best wishes,

    Kosh

  • I can't open a. PAK file without download and pay for one of the cleaners of pc them BS. Help

    I need to download a software upgrade LG to fix my TV. the software is a "." PAKfile"and I can not find a program to open it. Nobody knows what program to open a. PAKfile please

    On Tuesday, 7 February 2012, 15:08:54 + 0000, ScottBonzo wrote:

    I need to download a software upgrade LG to fix my TV. the software is a "." PAKfile"and I can not find a program to open it. Nobody knows what program to open a. PAKfile please

    A .pak file is a first version of the file that is now known as type
    .zip. Decompression programs should be able to unPAK it.

    Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
    Please reply to the newsgroup

Maybe you are looking for