ISE IOS CLI authentication Quandry

Similar Questions

• ISE Admin CLI password change

  Hello Experts,

  Recently, I changed my EHT Admin password, now I can connect to the ISE of GUI with the new password, but I can not connect to it through CLI or using old/new password.  I tried to change the GUI mode admin password again, but still I can not connect to ISE by CLI.

  Any help please...

  ISE got Admin GUI and CLI accounts are separate accounts.  Passwords are synchronized during the initial installation.  All other times, it must be done manually.

  The unique password which can be changed via the GUI is the password for the Admin GUI.

  The two passwords can be changed in CLI, but with very different commands.

  To change the password of Admin CLI, simply enter the command password

  To change the password of Admin's GUI, the command is reset-passwd newpassword admin ise application

  However, in your case, you must boot from the DVD of the ISE (or iso, if virtual) and select option 3 or 4 depending on your situation.

  

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• ISE 1.3 authentication problem (error 12321 PEAP has not SSL/TLS)

  Hi all

  I have this error when authenticating on the wifi (on the cisco ISE 1.3)

  12321 PEAP doesn't have SSL/TLS handshake, because the customer rejected the local certificate ISE.

  I have a cluster of two VM. I also have a local certificate for both and Quovadis.

  If anyone has any advice, docs or anything else that might help, thank you.

  Concerning

  Eric

  Hi Eric, this error message indicates that the client attempting to authenticate does NOT approve the CA that signed the certificate to your servers from ISE. You use a self-signed certificate or do you have a public certificate from a public CA such as VeriSign, GoDaddy, etc.?

  Thank you for evaluating useful messages!

• ISE-based certificate authentication

  Hello

  I am developing an understanding of certificate based authentication using EAP - TLS on the ISE. My question is do we really certificate authentication profile (CAP) even if it is enough just to perform certificate-based authentication and we don't are not interested in setting up authorization rules based on which field of the certificate was specified as username in the CAP. I'm asking this because I think that probably in certificate based authentication, ISE has just need to check the validity of the certificate and if it was signed by a certification authority that it can check by looking in the certificate store. Please let me know if I have the wrong concept.

  I am curious to know what the whole purpose of CAP? I read in a book that:

  To validate the identity ISE must ensure that the credentials are valid. In the case of authentication based on certificates, it must determine if:

  The digital certificate was issued and signed by a certification authority (CA).

  The certificate has expired (check the dates of the beginning and end).

  The certificate has been revoked.

  The customer has provided evidence of possession.

  This certificate has the correct use of the key, the critical extensions and extended values present key usage.

  So in above listed points where is used specifically for CAP?

  Thank you for taking the time to answer.

  Kind regards

  Quesnel

  Hi, Quesnel, I'll try to answer your points as best I know :)

  #1) I don't really know what the mechanics of ISE are when it comes to the CAP. It is however a snip-it of the Cisco Design Guide:

  S certificate of authentication profiles (CAP) are used in the rules of authentication for authentication based on certificates. The CAP sets certain attributes in the certificate to find out & use as a source of additional identity. For example, if the username is in the CN = field of the certificate, you can create a COURSE that examines the CN = field. Then these data can be used and verified against other sources of identity, such as Active Directory

  http://www.Cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_60_byod_certificates.PDF

  (#2), you should be able to set a COURSE and use it as a storage of identity without the need to put in a sequence. I've done several times and just re - confirm is it possible in my lab. Please check again :)

  (#3) une sequence of identity store lets examine you more than one identity store. In addition, it defines defines the order in which the Sources of identity are questioned. Once a match is found, the process stops and the information returned to ISE.

  Thank you for evaluating useful messages!

• ISE and failed authentications carried out by endpoints

  Hello

  I have Cisco ISE 2.1 with patch 1.

  I applied a permission policy send an Access_Reject to n, when a certain end point connects to the network.

  I noticed that the ISE starts correctly connect the failures of authorization of this endpoint.

  After a few minutes, I change the authorization policy to send an Access_Accept message to n for the same endpoint.

  I noticed that the ISE 2.1 allows endpoint.

  I get a lot of these messages:

  Endpoint 5434 conducted several failed authentications of the same scenario

  15039 rejected by authorization profile

  Do you know if there is a timer involved in this situation?

  Also see the Live session but I don't see any session to this endpoint. This is right, but I do not understand how to clear the previous phase of rejection.

  Is there a configuration or command to the Ise? or do other errors?

  Thank you

  Antonio

  Hi Antonio,.

  Endpoint 5434 conducted several failed authentications of the same scenario:

  The reason is that "repressive Client mechanism is enabled by default to protect the ISE back/DDoS attacks. Logic of this mechanism is to check if the client had several failed authentication in the specified time interval, after that the ISE blocks the client for the specified time interval.

  You can disable this feature in Administration > system > settings > RADIUS, repress the anomalous customers. You can change settings such as how long a customer should be blocked etc.

  I hope this helps!

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• ISE device administration authentication Radius possible?

  Hello

  does anyone know if the edge RADIUS authentication and authorization administration is possible with the actual release of ISE? I know that GANYMEDE will be available in future releases.

  Concerning

  Joerg

  Yes it is possible according to the "Ask the experts" forum

  --------------------------

  https://supportforums.Cisco.com/thread/2172532

  "If you use RADIUS for the administration of the system, ISE can be used using authorization policy elements that return Cisco av-pairs."  But personally, I think that ACS is currently superior to ISE for this task. »

  --------------------------

  In any case, I'm about to test "device admin" and "network access" at the same time in the same switch with Radius and ISE.

  Please rate if this can help

• ISE Voip phones: authentication failed against AD

  the message is

  2064 authentication method is not supported by any point of sale there is identity: authentication failed

  the user is present on the AD and test user to ise is ok

  the rule for check in AD authentication is created

  servers of strategy are fulfilled and in green

  If I create an internal user (just to test) authentication is ok

  my sequence of authentication is:

  MAB

  mab_ad

  dot1x

  dot1x_ad

  These phones use eap - md5

  I guess there is something to check in AD, can someone help me solve this problem?

  I don't think that Active directory supports EAP - Md5.

  I will recommend rather to use EAP - TLS. Most of the Cisco IP phones have certificates built-in MIC, which really helps to deploy EAP - TLS

• Problem with Cisco requested orders IOS CLI

  So I try to reload the router with EEM.  However, I want it done via the cli action statement, so I can delay the cooldown to 10.  However, I have problems with the model keyword.  Here's my applet and debugging.  It seems that the declaration of model does not meet what is asked.  I've tried several different combinations, but this one made the most sense to me.

  Event Manager applet

  event no

  message from syslog to action 1.0 "router Reload."

  command action 1.1 cli 'enable '.

  model "reload in 10" action 1.3 cli command 'yes '.

  command action 1.5 cli "confirm".

  action syslog 1.7 msg "it worked!"

  * 1 Mar 00:37:18.831: % HA_EM-6-LOG: TEST: reload router

  * 00:37:18.839 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_open.

  * 1 Mar 00:37:18.939: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 1 Mar 00:37:18.939: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 >

  * 00:37:18.939 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 > activate

  * 1 Mar 00:37:18.955: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 1 Mar 00:37:18.955: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 #.

  * 00:37:18.955 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 #reload in 10

  * 00:37:18.967 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: confirm

  R2 #.

  R2 #.

  * 1 Mar 00:37:38.879: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 00:37:38.879 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: % If please answer 'yes' or 'no '.

  * 1 Mar 00:37:38.879: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:

  * 00:37:38.879 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: the system configuration has changed. Save? [Yes/No]:

  * 00:37:38.879 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_close.

  The manual way:

  R2 #reload in 10

  The system configuration has changed. Save? [Yes/No]: Yes
  Building configuration...
  [OK]
  Recharge regular in 10 minutes by the console
  Reload reason: reload command
  Proceed to recharge? [confirm]
  R2 #.
  * 00:56:27.083 Mar 1: % SYS-5-SCHEDULED_RELOAD: Reload asked at 01:06:22 UTC Friday, March 1, 2002 at 00:56:22 UTC Friday, March 1, 2002 by the console. Reason for reload: reload the command.

  I tried this:

  Event Manager applet
  event no
  message from syslog to action 1.0 "router Reload."
  command action 1.1 cli 'enable '.
  Action 1.2 cli command "wr".
  model "reload in 10" action 1.3 cli command "confirm".
  action syslog 1.7 msg "it worked!"
  !
  end

  R2 #.
  R2 #.
  #event R2 Manager run TEST

  * 1 Mar 00:54:52.855: % HA_EM-6-LOG: TEST: reload router
  R2 #.
  * 00:54:52.863 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_open.
  * 1 Mar 00:54:52.963: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:
  * 1 Mar 00:54:52.963: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 >
  * 00:54:52.963 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 > activate
  * 1 Mar 00:54:52.979: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:
  * 1 Mar 00:54:52.979: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 #.
  * 00:54:52.979 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 #wr
  * 1 Mar 00:54:53.895: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUTSIDE:
  * 00:54:53.899 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: building configuration...
  * 1 Mar 00:54:53.899: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: [OK]
  * 1 Mar 00:54:53.899: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): OUT: R2 #.
  * 00:54:53.903 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): IN: R2 #reload in 10
  * 00:54:54.015 Mar 1: % HA_EM-6-LOG: TEST: it worked!
  R2 #.
  * 00:54:54.015 Mar 1: % HA_EM-6-LOG: TEST: DEBUG (cli_lib): CTL: called cli_close.

  Your second approach is good, but you aren't answer the prompt.  Add:

  Action 1.8 cli command 'y '.

• Error connecting to ISE for guest authentication

  Hi friends,

  I have attached an image that becomes as some of our users try to connect to guest SSID using their mobile phones.

  It seems that the question is for users of Apple devices?

  Anyone of you experience any problem like this.

  Grateful if you could help on this.

  Thank you

  Riyas Rasheed

  Looks like you redirect to an ip address, instead of the fqdn of the ise server, which will give you errors like that.

• Cisco ISE and question Admin CLI

  Hello.

  I have a strange problem with my installation of ISE. First of all, I use AD users for authentication. It works very well on HTTPS. I can connect with my admin AD by HTTPS.

  The problem starts when I try to log in via the CLI (SSH). I got login prompt. When I type my credentials AD that he said "Login Incorrect" and I got the same result if I try it with the local administrator account.

  I tried to reset the password for the local administrator over HTTPS to check this kind of wrong password. But no effect.

  My ISE is installed VMware.

  Experiences with it?

  ARM

  CLI authentication which is the base Linux OS is not / cannot be bound to AD to the admin authentication. Only, you integrate the application on top of Linux, which in this case is ISE, to AD. So, if you want to connect to the cli shell, you will need to use the username/password you configured during installation. If you do not remember those you need to perform a rest of password via the installation CD / ISO

  Thank you for evaluating useful messages!

• Authentication RADIUS with ISE - a wrong IP address

  Hello

  We use ISE for radius authentication.  I have setup a new Cisco switch stack to one of our branches and set up the device network in ISE.  Unfortunately, in trying to authenticate, ISE logs show a lack of "Impossible to locate device network or Client AAA" the reason for this failure is that the log shows that it comes from a bad IP address.  The IP address of the switch is 10.xxx.aaa.241, but the logs show that it is 10.xxx.aaa.243.  I removed and added the configs of RADIUS on ISE and the switch, but it is always so que.243.  There is another switch battery location (same model, IOS etc), which works correctly.

  The config of RADIUS on the switch:

  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login Comm group local RADIUS
  the AAA authentication enable default
  RADIUS group AAA authorization exec default authenticated if

  radius of the IP source-interface Vlanyy
  10.xxx.yyy.zzz RADIUS server
  10.xxx.yyy.zzz auth-port 1812 acct-port 1813 ipv4 address
  abcdefg 7 key

  The journal of ISE:

  Overview
  5405 RAY lost event
  Username
  ID of the endpoint
  Profile of endpoint
  The authorization profile

  Details of authentication
  Source Timestamp 2014-07-30 08:48:51.923
  Receipt 08:48:51.923 Timestamp 2014-07-30
  Policy Server ise
  5405 RAY lost event
  11007 failure reason could not locate device network or Client AAA
  Resolution check if the device network or AAA client is configured in: Administration > network resources > network devices
  Root cause could not find the network device or the AAA Client while accessing NAS by IP during authentication.
  Username
  Type of user
  ID of the endpoint
  Profile of endpoint
  IP address
  Identity store
  Membership group
  ID of Session verification
  Authentication method
  Authentication Protocol
  Type of service
  Network device
  Type of device
  Location
  10.xxx.AAA.243 address IP NAS
  ID of Port NAS tty2
  Virtual NAS Port Type
  The authorization profile
  Status of the posture
  Security group
  Response time

  Other attributes
  ConfigVersionId 107
  Device port 1645
  DestinationPort 1812
  Radius protocol
  NAS-Port 2
  AcsSessionID ise1/186896437/1172639
  IP address of the device 10.xxx.aaa.243
  CiscoAVPair

  Measures
  Request for access received RADIUS 11001
  11017 RADIUS creates a new session
  11007 could locate no device network or Client AAA
  5405

  As a test, I set up a device that uses the adresse.243.  While ISE claims that it authenticates, it really doesn't.  I have to use my local account to access the device.

  Any advice on how to solve this problem would be appreciated.  Please let me know if you need more information.

  Beth

  Remove your (RADIUS-server host 10.x.x.x... ect) tele-health and try this command and see if the problem goes away. The new section is the non-standard expression allows to see if that helps.

  RADIUS-server host non-standard key of acct-port of the auth-port 1645 10.xxx.xxx.xxx 1646 *.

• RADIUS authentions with ISE - Authenications Live blew with entries

  Hello

  We have a Brocade load balancer (ADX 1000) that uses ISE 1.2.0.899 Patch 1,2,7,12,13 as a radius server.  By connecting to the device through the web interface, it explodes live authentication ISE logs. I don't see this behavior when you access the appliance via ssh. I'd appreciate any help to solve this problem.

  capture.jpg

  

  Thanks in advance for your time.

  Looks like you have some sort of poll set up on Brocade and who jump ISE live the authentication section. I suggest you to set the filter of picking for the identity that is your username, so that we can remove it.  How to configure the filter sampling on ISE 1.2

  -Jousset

• Authentication (Windows Server 2013) AD Cisco ISE problem

  Background:

  Has deployed two Cisco ISE 1.1.3. ISE will be used to authenticate users wireless access admin WLC and switches. Database backend is Microsoft running on Windows Server 2012 AD. Existing Cisco ACS 4.2 still running and authenticate users. There are two Cisco WLCs version 7.2.111.3.

  Wireless users authenticates to AD, through works of GBA 4.2. Access admin WLC and switches to the announcement through ISE works. Authentication with PEAP-MSCHAPv2 access and admin PAP/ASCII wireless.

  Problem:

  Wireless users cannot authenticate to the announcement through ISE. This is the error message '11051 RADIUS packet contains invalid state attribute' & '24444 Active Directory failed because of an error that is not specified in the ISE'.

  

  Conducted a detailed test of the AD of the ISE. The test was a success and the result seems fine except for the below:

  xxdc01.XX.com (10.21.3.1)

  Ping: 0 Mins Ago

  Status: down

  xxdc02.XX.com (10.21.3.2)

  Ping: 0 Mins Ago

  Status: down

  xxdc01.XX.com

  Last success: Thu Jan 1 10:00 1970

  March 11 failure: read 11:18:04 2013

  Success: 0

  Chess: 11006

  xxdc02.XX.com

  Last success: Fri Mar 11 09:43:31 2013

  March 11 failure: read 11:18:04 2013

  Success: 25

  Chess: 11006

  Domain controller: xxdc02.xx.com:389

  Domain controller type: unknown functional level DC: 5

  Domain name: xx.COM

  IsGlobalCatalogReady: TRUE

  DomainFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

  ForestFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

  Action taken:

  Log Cisco ISE and WLC by using the credentials of the AD. This excludes the connection AD, clock and AAA shared secret as the problem.

  (2) wireless authentication tested using EAP-FAST, but same problem occurs.

  (3) detailed error message shows below. This excludes any authentication and authorization policies. Even before hitting the authentication policy, the AD search fails.

  12304 extract EAP-response containing PEAP stimulus / response

  11808 extracted EAP-response containing EAP - MSCHAP VERSION challenge response to the internal method and accepting of EAP - MSCHAP VERSION such as negotiated

  Evaluate the politics of identity

  15006 set default mapping rule

  15013 selected identity Store - AD1

  24430 Authenticating user in Active Directory

  24444 active Directory operation failed because of an error that is not specified in the ISE

  (4) enabled the registration of debugging AD and had a look at the logging. Nothing significant, and no clue about the problem.

  (5) wireless tested on different mobile phones with the same error and laptos

  (6) delete and add new customer/features of AAA Cisco ISE and WLC

  (7) ISE services restarted

  (8) join domain on Cisco ISE

  (9) notes of verified version of ISE 1.1.3 and WLC 7.2.111.3 for any open caveats. Find anything related to this problem.

  10) there are two ISE and two deployed WLC. Tested a different combination of ISE1 to WLC1, ISE1 to WLC2, etc. This excludes a hardware problem of WLC.

  Other possibilities/action:

  1) test it on another version WLC. Will have to wait for approval of the failure to upgrade the WLC software.

  (2) incompatibility between Cisco ISE and AD running on Microsoft Windows Server 2012

  Did he experienced something similar to have ideas on why what is happening?

  Thank you.

  Update:

  (1) built an another Cisco ISE 1.1.3 sever in another data center that uses the same domain but other domain controller. Thai domain controller running Windows Server 2008. This work and successful authentication.

  (2) my colleague tested in a lab environment Cisco ISE 1.1.2 with Windows Server 2012. He has had the same problem as described.

  This leads me to think that there is a compatibility issue of Cisco ISE with Windows Server 2012.

  
  

  
  

  Yes, it seems that 1.1.3 doesn't support Server 2012 as of yet.

  External identity Source OS/Version

  Microsoft Windows Active Directory 2003 R2 32-bit and 64-bit

  Active Directory Microsoft Windows 2008 32-bit and 64-bit

  Microsoft Windows Active Directory 2008 R2 64-bit only

  Microsoft Windows Active Directory 2003 32-bit only

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/compatibility/ise_sdt.PDF

• Reimage ISE 1.1.4 on NAC 3355 Server Issues

  g ' Day All,

  I have problems with an ISE recreate the image of a server of the NAC 3355 currently. I successfully download the iso for 1.1.4 ise and it burned on a dvd, I went through the process of remiage, with all packages being installed successfully (or so it seems) there is no problem during the packages downloaded and installed from the DVD.

  My question is, when the box reboots and I am introduced to the login prompt where I can type "setup" to launch the initial config script, I can enter all relevant details and the system displays the network interface, pings the default gateway and the server names with success (I don't see any errors that the pings have failed) and it seems to start installing the ISE.

  I get the screen message on does not use 'Ctrl C from this point', then I see the "installing applications...." "on the message screen, but rather than see the 'ISE installation' on the message of the screen as detailed in the installation guide hardware 1.1.x my install goes straight to the screen message"generating configurations"then restarts the box.

  Once reboot the box, I can not connect with the name of username/password combo that I entered in the initial configuration script, but I get no more on the screen messages or prompts to create a password database, etc.. I only get the cli command prompt. I am able to navigate the fine cli, I can ping the gateway and nameservers of the CLI fine, but if I apply for a show, he comes back with nothing. If I make a request to configure ise, the cli says that EHT is not installed.

  Help Please guys.

  See you soon,.

  MSI

  Please keep this thread updated to date.

  Jatin kone

• RA on IOS router VPN

  Hello Experts,

  Can someone send me the link on how to set up remote access VPN on Cisco IOS routers (authentication of remote users based on user names configured locally on the router itself)?    I found a few links, but they are all authencating by certificate, LDAP users.     I need authentication direct simple remote control-users by using the name of normal user/pass created on the router IOS locally.

  I don't have CA or LDAP server to authenticate remote users.  I just need simple authentication as what Cisco ASA.

  Hi Wade,.

  In addition to this shared Neno, you can check this link to third party which is pretty clear:

  http://www.tunnelsup.com/remote-access-VPN-connection-using-a-Cisco-router

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.