isn't 90% more questions from the actual training?

Similar Questions

• Receive the message error "Windows Media Player cannot extract one or more tracks from the CD"

  Original title: Windows Media Player 12 in Windows 8 - will not tear, will not allow rip parameter changes

  Recently started Windows Media Player displays this error message when I tried to rip CDs: "Windows Media Player cannot extract one or more tracks from the CD." When I checked the rip settings, I found that no location has been chosen, even if I had chosen a location when I first set up WMP over a year ago. When I clicked on the "Change location" button, nothing happened, so I'm not able to choose a file location. I downloaded and Fix It (http://support.microsoft.com/mats/windows-media-player-diagnostic-Windows-8/en-us) from Microsoft allows WMP and the library, hoping this would solve the problem, but the problem persists. After that, I also found that none of the rip settings can be changed, not only the location of the file. I get an error message that "ripping settings could not be applied" when I try to change anything on the tab music Rip under Options. I found a support of forum responses that mention a registry fix but does not provide any details on how to achieve this. Any ideas would be greatly appreciated.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Ripping allows you to put the titles of your audio CD on your PC. When you rip the tracks, they become digital files on your PC.

  There are two places in the Player library where you can customize your settings and better to make ripping work:

  • In the Rip settings menu (with less choice customization).

  • In the Options dialog box (with several choices of customization).

  Method 1: run the tool library, Windows Media Player and Windows Media Player settings and check if the extraction is possible.

  Step 1:

  a: press the logo Windows + O to open the search box.
  b: Type Troubleshooting, press ENTER.

  c: now, click on programs.

  d: and then click Windows Media Player  library.

  Step 2:

  a: press the logo Windows + O to open the search box.
  b: Type Troubleshooting, press ENTER.

  c: now, click on programs.

  d: and then click Windows Media settings.

  Method 2: Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/change-settings-for-ripping-music

  Answer please if you have any questions.

• Questions from the media on the report columns

  Hello

  I'm experimenting with questions from the media on the APEX components such as the columns on the report.

  I have an example that works, but I wonder if it's the best way to go about it.

  APEX media query example

  I applied the following CSS

  @media (orientation:portrait) {
    .landscape_only {display:none;}
  }
  @media (orientation:landscape) {
    .portrait_only {display:none;}
  }
  

  For components such as regions, buttons etc - I can apply "CSS Classes" attribute class to the component level.

  for example: I have applied the .portrait_only in the area of 'Code' in my example

  but for the columns in a report, I had to apply this jQuery on the page loading.

  $('th#HIREDATE, td[headers=HIREDATE]').addClass("landscape_only");
  

  If I applied to the class in the detail of the column that the data has been hidden when Guide to portrait - not the entire column.

  Are there more effective methods of enforcement of the class to the column?

  Reading articles like this lead me to think that way, but I don't know if APEX could be other solutions.

  5 tips for better jQuery selectors - SitePoint

  It becomes a little pain if I wanted to list a number of columns.

  I look forward to jQuery gurus ;-)

  Scott

  Rather than specify the classes at the level of the components and using jQuery when running, why not simply specify the items directly in the stylesheet?

  @media (orientation:portrait) {
    #P2_BUTTON2,
    th#HIREDATE, td[headers=HIREDATE]  {display: none;}
  }
  @media (orientation:landscape) {
    #P2_BUTTON1 {display: none;}
  }
  

  This seems to be a more effective approach that all orientation-based rules are easily visible and easy to manage in one place, rather than be dispersed through the definitions component and dynamic action.

• Error during the initial install: there is no end point for more available from the endpoint mapper.

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  While you select "Accounts of Windows I want to monitor on this computer" it shows the loading for a long time then popus symbol with:

  Windows Live Family Saftey modal window popup:

  "There is no end point for more available from the endpoint mapper."

  800706 9 error code

  Any ideas?

  I had the same problem and the error you mentioned above... Has been frustrating me. After much research I found out she was related to the basic and Windows Firewall filtering engine.

  Check if your Windows Firewall is working properly, and if you can make changes. If you get an error code when you try to change your firewall settings, which could be what it is.

  I followed this to correct the BFE and Windows Firewall it retries then parental control and he went through with NO PROBLEMS of...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Firewall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-B561-bc49cbdad904

  Hope this works for you as well...

• Windows Media Player is unable to extract one or more tracks from the CD.

  I also got this message "Windows Media Player is unable to extract one or more tracks from the CD" pop up in an attempt to 'Copy' the CD!  I have Windows 7 and had NO problem for several weeks, ripping my music from CD sales in my MUSIC folder.  I got all "parameters" laid so that whenever I inserted a new CD he automatically pulled and then ejected.  I had NOT brought any changes to settings but for some reason all of a sudden it doesn't work anymore?

  I have trried restart, check all the parameters according to your advice making SURE that all the files of 'Target' were correct (they are), but all that happens is a few seconds after I insert a CD it gives me this message (Windows Media Player cannot extract one or more tracks from the CD.) and then the CD will eject with NO of TEAR that occur?  It's VERY frustrating!  There, can anyone help?  Please?  I have NO idea where to check then!

  Hi Jetlag40,
   
  Follow the steps mentioned in the reference link below and check if it works.
   
  http://social.answers.Microsoft.com/forums/en-us/w7music/thread/93c279f7-89ae-4a7c-B7EA-fdc7785ed335
  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.
   

• An error occurred when trying to share < folder name >. There is no end point for more available from the endpoint mapper. The shared resource was not created at this time

  Original title: sharing folder error

  How to solve this error message when I am trying to share a folder: "an error has occurred when trying to share . There is no end point for more available from the endpoint mapper. The shared resource was not created at this time. »

  Hello

  Were there any changes made on the computer before the show?

  I suggest to see the link and try to run the Troubleshooter:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  File sharing essentials

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

• Message error "WMP cannot extract one or more tracks from the cd."

  I am running Windows 7 64-bit version of Windows media player 12, Firefox version 28.I changes the format in Windows media player

  WMA (Windows Media auto) for Mp3.When, I insert the cd (tried various) tracks appear in the library, and when I select RIP

  It goes through the process of the extraction of each track. When I try to drag in sync payne, I get a red circle with a red line in the Center

  and and are not deposited in the payne. The error message is THAT WMP is unable to extract one or more tracks from the cd. I tried the convenience store of wmp and

  other suggestions to other positions, but without success. Can you help me?

  Kind regards.

  Terence,

  I only see the answer from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/unable-to-rip-audio-CD-using-the-media-player/93c279f7-89ae-4a7c-B7EA-fdc7785ed335

  Let us know if you need help.

• Error message "Windows Media Player is unable to extract one or more tracks from the CD" converting .cda to .mp3?

  I put the CD in the drive, choose "RIP CD" in widow Media Player, but the following message is displayed.

  "Windows Media Player cannot extract one or more tracks from the CD."

  What do do now?

  Hanna,

  Please contact the Microsoft Community.

  I wish that you look at the answers in these discussions-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-Media-Player-cannot-rip-one-or-more-tracks/ec2a0651-e9ea-4ad9-8daf-5abf9e9e2035

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/unable-to-rip-audio-CD-using-the-media-player/93c279f7-89ae-4a7c-B7EA-fdc7785ed335

  We know if this helps you solve the problem.

• Questions from the screen and keyboard on Satellite R830-181

  Hello

  I had exactly the same problem with it;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=280934

  I also explained what is it and how it over time in this topic.

  To sum up; my screen and keyboard do not work in my Toshiba Satellite R830-181, 13.3 '' laptop.

  My questions;
  1. is it a motherboard problem?

  2. as it runs on an external monitor, I guess that the graphics card or processor is fine.
  There is no damage on the screen, so I guess there is a problem with the connection of the power supply to the screen.

  If I buy a new screen I have my doubts it will work.

  I'll probably send it to the service tech in my country (hard to find here reliable technology services Toshiba), however, I would like to know what may be the cause and if I can fix it myself.

  What do you think guys? It is a power issue or a problem with the monitor itself?
  If a power issue or something else rather than the screen, how can be fixed?
  Same question applies to the keyboard.

  3. If I repair or fix myself, you think it will happen again? Because I think that this could be a faulty laptop computer of a certain series of production since someone else has experienced the same thing with this model.

  can 4 - there be a relationship between the non-functional keyboard and screen?

  5. If this can be resolved with a replacement of the screen, that I need to find a laptop screen Toshiba R830 or I can buy any 13.3-inch screen?

  As far as I know this model is not supported by the company more, so it is quite difficult to find a screen R830.
  It is difficult to find a 13.3-inch screen, anyway, but still, if I can use the screen of another model which would ease my problems.

  I need an idea on that.
  Thanks :)

  Post edited by: Cagri87

  > 1 - is it a motherboard problem?
  Not easy to say: If the external monitor works correctly then this isn't problem chart/motherboard.
  The external USB keyboard works properly, if not motherboard problem too.

  > 2 - because it works on a monitor external I guess graphics card or processor is fine.
  Yes, that's correct.

  > If I buy a new screen I have my doubts it will work.
  I do not recommend to buy the new parts before the defective parts has not been verified.

  > I'll probably send it to the service tech in my country (hard to find here reliable technology services Toshiba), however, I would like to know what may be the cause and if I can fix it myself.
  Good idea to send it to Toshiba service partner since the guys would be able to control parts and fix it.

  > What do you think guys? It is a power issue or a problem with the monitor itself?
  If a power issue or something else rather than the screen, how can be fixed?
  > Same question goes for the keyboard.

  Don t think someone can tell exactly what's causing this according to me its just a bad luck material can start malfunction happens in every possible branch of industries (TV, computer, smartphone, cars)

  can > 4 - there be a relationship between the non-functional keyboard and screen?
  No, the keyboard is only connected to the motherboard, display is also connected to the motherboard, but there is no connection between the keyboard and the display.

• Deleted question from the Forum?

  Is someone deleting messages from this forum?

  I asked a question on the backup of the computer and the question is no longer available?

  Markus

  Hello Huaraz,

  We will investigate the removal of the thread and I see that you have created a new thread here. I went with you on your question there as well.

• Equium L20-264: Question on the actual battery life

  Hi Forum: I know that I need PA3420U-1BRS battery as a replacement for my laptop. Can someone tell me what the real battery life is that I can't find any information on this.

  Thank you.

  Hello

  It is not easy to say, and that it is not generally answer on this question.
  The life expectancy of the batteries depends on the use of portable computers. The use of programs and applications heavy and high performance decreases battery life.

  However, you can charge the battery about 500 times. After this period, the battery performance decreases.

• .. more questions about the value of the slider extraction

  It is a matter of Alain S. .. .in your sugested code: The resistance value is equal to the value Y of the trace of the Z11re and the capacitor, or the value of the inductance are derived from the track of Z11im.  Inside the Structure of the event, the structure space 0 and 1 are connected to the same value of slider Y?  How can you tell the business structure to use (in this case 0) the track of Z11re and in case 1 Y the Y in the trail of Z11im? The calculated values seem fair? .. .it must be defined with CursIdx within the Structure of the event, but how and where can I see the installation of this control? Have a while loop for the Structure of the event force the program to loop always at this place, it generates a lot of CPU (I have add an indicator to see the number of iterations), it seems to me that the structure of the event should do this whitout was looping work? Kind regards

  After reading on CursIdx, I understand the concept.

  case closed.

• questions from the media

  CC of Dreamweaver has something to automatically configure the media queries?  I thought it was under Edit, but I don't see anything.

  Not a video, but a series of screenshots.

  The Live View window washer allows to drag the Document window to the approximate size in which you want to create a breakpoint.

  

  Click the icon in the bar of Visual Media Queries:

  

  This opens a simple Panel to define your query:

  

  The drop down menu from the top has options for min-width, max-width and min - max. For min-width and max-width fields are automatically filled in with the current width, but the fields are editable. The second drop down menu has the options for creating the request of media into a new CSS file, or a

• Select using the settings from the actual values

  Please can someone explain how PL/SQL works in environments where you pass a value against
  hard-coding it? When it is hard coded, I get an answer of 1 row and the correct information
  
  When I go through the call statement in the value, I get exactly fetch returns more rows than the number of rows. ORA - 01422
  
  
  Here's the line of pl/sql command-
  
  declare
  number of n_count;
  AA char (255);
  BB char (255);
  CC char (255);
  
  Start
  
  Select identifiant_volume, orig_id, incoming_msg
  aa, bb, cc
  
  Of
  table_name where file_name = "123456".
  and incoming_msg = 'I ';
  
  n_count: = number of lines sql %;
  DBMS_OUTPUT. Put_line ('sqlcode is' | sqlcode);
  
  end;
  /
  
  SQLCODE is 1.
  
  
  The foregoing does not return a line... that is what I want
  
  
  Now if I wrap it in the filename it is where the extraction returns several lines.
  
  create or replace procedure (file_name IN VARCHAR2)
  AUTHID CURRENT_USER
  
  IS
  
  number of n_count;
  AA char (255);
  BB char (255);
  CC char (255);
  
  Start
  
  Select identifiant_volume, orig_id, incoming_msg
  aa, bb, cc
  
  Of
  table_name where file_name = file_name
  and incoming_msg = 'I ';
  
  n_count: = number of lines sql %;
  DBMS_OUTPUT. Put_line ('sqlcode is' | sqlcode);
  
  end;
  /
  
  procedure is created successfully.
  
  then
  
  Call TEST ('123456');
  
  error on line 1 p
  ORA-10422: exact fetch returns more than number of lines
  ORA-06512 at the TEST, line 17
  
  Line 17 is select identifiant_volume, orig_id, incoming_msg
  aa, bb, cc
  
  so that is - select this all and in a procedure that causes this error... AND how to work around?
  
  Thanks in advance.

  You have a problem of name resolution, caused by the use of a parameter "nom_archive" with the same name as a column in the table. You can solve this problem in a procedure or function by prefixing the parameter to the procedure of the file name, for example. my_procedure.file_name, by naming the parameter differently or in an anonymous block, using a LABEL of PL/SQL.

• FTP - open the site in question from the file Explorer.

  Hi all

  I am here today with a common question, which seems to have been answered several times, but none of the above worked for me.

  My problem is the following:

  • http://prntscr.com/39ebdv

  It's my current installation:

  • Ubuntu Server running 12.04 with installed ProFTPd.
  • Windows 7 computer (desktop) and laptop.
  • Windows File Explorer.

  Here's what I tested, and what are the results I get:

  On my two main computers, each running Windows 7, I get the image displayed above. (For those of you who cannot see the image, there are a stain on the bottom of this question). However, I tried it on two other computers in my LAN, and they work. I also tried on a computer in a different city, and it works. My FTP address is the following: "ftp://ftp.marshalldrive.ca" without the quotes.

  Here are some solutions I've tried:

  1. with the help of Internet Explorer (my current browser is Google Chrome), pressing 'Alt - view-> in the file Explorer view', I get the error displayed.

  2. turn off my firewall and my anti-virus, same results.

  3. go to the file Explorer Windows and in the address bar: "ftp://ftp.marshalldrive.ca" (without the quotes)

  4 import a registry that looks like this: http://prntscr.com/39ee2j (code shown below), using the above, didn't work.

  5. copy of the record of one of the other computers to work.

  6. release of Google Chrome and using IE.

  That's all.

  When you use the browser (IE, GC, PSC), I can type in ftp://ftp.marshalldrive.ca, and it works. However, it does not work when I try to display in the folder view. I get the above error.

  Why am I trying to do?

  -I know FileZilla exists and many others. I like the simple layout of the windows Explorer, and it is easier for the elderly to use to use F.Z. I also prefer not having to install anything and using the built-in module.

  IF anyone can help me I can help you in return. I am creating a file storage system, and I can give you free space on my server.

  No Image error:

  "Windows cannot access this folder. Make sure that you typed the filename correctly and that you are authorized to access the folder.

  Details:

  A connection with the server could not be established. »

  No Reg Code Image:

  "

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\ftp]
  "ShellFolder" = "{63da6ec0-2e98-11cf-8d82-444553540000}".
  'Source filter' = "{E436EBB6-524F-11CE-9F53-0020AF0BA770}".
  "URL Protocol"=""
  @= "URL: File Transfer Protocol.
  "AppUserModelID"="Microsoft.InternetExplorer.Default."
  "EditFlags" = dword:00200002
  'FriendlyTypeName"="@C:\\Windows\\System32\\ieframe.dll,-905 '.

  [HKEY_CLASSES_ROOT\ftp\DefaultIcon]
  @= "C:\\Windows\\System32\\url.dll,0".

  [HKEY_CLASSES_ROOT\ftp\shell]

  [HKEY_CLASSES_ROOT\ftp\shell\open]
  "CommandId"is"IE. Protocol ".

  [HKEY_CLASSES_ROOT\ftp\shell\open\command]
  "@="\"C:\\Program Files\\Internet Explorer\\iexplore.exe\" %1 ".
  "DelegateExecute" = "{17FE9752-0B5A-4665-84CD-569794602F5C}".

  "

  Hey Tyler,

  Please contact the Microsoft Community.

  I would have you post in TechNet for assistance more.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Let us know if you need anything else from us.