ISO, always very fast if you find answers to my questions__

only thing I want to know is how to remove viruses

Hello

If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.

No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.

It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.

TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684

Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Malwarebytes - free
http://www.Malwarebytes.org/

Run the malware removal tool from Microsoft

Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)

Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure that it is all gone.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/   <-->
http://info.prevx.com/downloadcsi.asp  <-->

Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Try the demo version of Hitman Pro:

Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro

--------------------------------------------------------

If necessary here are some free online scanners to help the

http://www.eset.com/onlinescan/

New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htm

Original version
http://OneCare.live.com/site/en-us/default.htm

http://www.Kaspersky.com/virusscanner

Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

--------------------------------------------------------

Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------------------------------------------

If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

I hope this helps and happy holidays!

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • My I pad is three years old. Always load up. It was very fast, but has recently begun

    I have apple I pad 4, he is three years old. OS 9.2.1 appliction10, 12.5 GB, available 3.8 GB capacity. It was very fast loading. Recently is seems to take forever. Several minutes.

    Try closing all your apps and force restart the iPad. This will affect all the data.

    Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close. Do this with all applications.

    Force now restart your iPad. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

    IF this does not help, after the return of more detailed information such as what do you exactly mean by it takes several minutes to load.

  • Satellite R830 - 10 c fan always run very fast

    Hello

    I just erased the hard drive and reinstalled all CD recovery disc. The only additional software that I installed is windows office 2010.

    I have read other discussions on the fan and changed the setting to colling under voltage of the battery and I've updated the BIOS. I don't think I have the recognition of the fingerprint software installed only face.

    However fan works always very very fast all the time. Processor, which is an i3 2310 @2. 10 GHz, around 30% and 50% of RAM is bieng used approximately 2.04 GB.

    IEXPLORER uses more CPU and RAM to all about 02-05 looking at the Task Manager and about 482 000 K memory. I have 92 processes. System Monitor is running the most discussion, 145 under resources. I don't know what this means, but the blue line on the chart of the CPU in the resource manager is always upward at 100% outside the odd dip to 95%.

    Anyone with any ideas or solutions, it would be much appreciated!

    Thank you

    Post edited by: sivyer2081 Info

    It is a known issue with McAffe. Remove this preinstalled trial version will reduce CPU activity and automatically cooling fan runs much quieter. I put t know what antvirus you use now but with Avira antivir, you'll be happy.

  • Satellite P70 - Has: noise sometimes whirring very fast is displayed

    My P70 - A Satellite, which is less a year since purchase sometimes emits a very fast whirring noise from the right side of the laptop that you are looking at him.

    It does not always happen, but it is becoming more common - it is more important to start.
    Something is obviously wrong — I believe that this has something to do with the cooling fan.

    I realized that the noise will disappear if you tilt the machine from front to back, but then when you place flat once again very high speed roar is still there.

    Someone at - it had a similar problem or have any suggestions?

    Thank you

    Hello

    On the right side of the computer, you can find the vents.
    This means that a module of cooling and fan is placed on this side.
    According to your information, noise whirring very fast (vibrations, maybe?) are produced by the cooling fan.

    In my opinion it of difficult to say if your cooling fan is malfunctioning because the noise of the fan will be always noticeable, especially if the laptop needs to be cooled.

  • Gets the message SVChost.exe cannot initialize at least 6 to 10 times & must have access to the very fast computer.

    Original title: I think I have an outbreak or "pulsed" windows.

    It is really difficult to use list drop-down windows because the impulse you kicked out of the window. Even close you have to be really quick to hit the off button usually you have to be very fast and catch the window open. I checked for viruses and found zero with PCcillan. When it closes down you get SVChost.exe cannot initialize at least 6 to 10 times. I tried to restore the system in January when he was not that, but it does not load a restore. Any ideas?

    In the contrary case, the laptop works very well and has no code error or another problem!

    Hey Mustangrh68,

    Reading your question, I could find a thread that I think will be very useful for you, he explains that the rootkit virus are prone to files to effect similar to your question:
    If you have any questions, return to this topic and explain what were your results.
    Be sure to include all the details that you can when you describe your results.
    Thanks for posting of Microsoft Answers!
    Good luck with the troubleshooting.
  • Protection against malwares always turned off when you turn on the computer.

    Windows vista Home Edition 64-bit
    BitDefender antivirus 2010

    Whenever I turn on my computer, I am prompted with a warning that my computer is not fully protected. I click the Security Center icon and find that my Articles of malware protection are disabled. I installed Bitdefender antivirus 2010. Is this a common phenomenon which should be? If this is not the case, how to solve? Windows Vista was installed in July this year and Bitdefender was installed in November this year. My software is up to not.4 from this day, December 15, 2009. If possible, please send your comments to my email address - * address email is removed from the privacy *. Thank you.

    Hello

    To add to thin boards of karena R:

    Here's what I use and recommend:

    Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
    Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

    Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

    Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
    (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
    http://www.avast.com/eng/avast_4_home.html

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
    Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
    a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

    http://www.Malwarebytes.org/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Satellite A500-025 - optical drive runs very fast and makes the laptop

    Just bought PC toshiba A500-025.

    When I put in some disc in the optical drive, it runs very fast and makes the phone vibrates.

    I was told that there is a toshiba utility that detects an imbalance in the disc and slows down the speed of the drive, but I don't know where to find this software utility.

    Thank you.

    Hello

    I think you mean the acoustic silencer
    As I remember, such tool was available for some laptops with pre-installed Win XP or Vista.
    For example; the acoustic silencer was available for some of the Satellite A200 and you could download this on the European driver Toshiba page.

    To be honest, there s nothing unusual that the CD/DVD drive runs very fast for a few moments, this happens in my portable two different.
    The STRANGE turns very quickly for a few seconds after the CD has been inserted.
    This happens because as the research of windows OS for the content placed on the disc

  • The very fast screensaver bubbles

    I have the same problem.  Recently reinstalled Windows for game purposes, since I had been using Linux (prefer a lot, for me).  If I had enough room for a dual-boot, I would run ' nix unless I wanted to start this or that game.  Anywho, I don't have the space more (lost a few hard drives).  So, now that I am running Windows x 64 (EVGA 8600gts, E7500 Core2 processor, 4 GB RAM), I leave the PC at night, go to bed, and in the morning, the bubbles are spinning around my screen at the speed of mach.  Rather boring.  The problem persists, Microsoft.

    EDIT: And Yes, I play with settings html screensaver editors (I share, if someone wants), and they did what they said they did, but still have not slowed the blighters.  If I had a big enough screen, fast super bubbles would make excellent moving targets of shooting archery.

    Separated from: https://answers.Microsoft.com/en-us/Windows/Forum/windows_7-performance/bubbles-screen-saver-very-fast-after-sitting-for/25f63040-6EB8-4aaa-acc5-de5ab098f72b?page=6&TM=1402420435575

    Thanks for the reply.  To answer your questions, as follows:

    1 this is an old Gateway GT5268e.

    2 it has upgraded RAM, CPU and GPU.

    2a: RAM: 2 GB DDR2@800MHz, DDR2@530 2 GB (or more) MHz

    2b: CPU: Core2Duo E7500 @ less than 3 GHz

    2 c: GPU: EVGA Geforce 8600GTS 512MB

    On my PC, I've updated all the drivers for all devices.  The problem has persisted, but I used an edit registry (described in the http://www.sevenforums.com/tutorials/2139-bubbles-screen-saver-change-settings.html)

    and updated the following values:

    I have not seen the problem since.  Solved?  I couldn't tell you, still.

  • "This USB mass storage device can transfer information faster if you connect it to a USB 3.0 port Superspeed ' when the device is already connected to a USB 3.0 port.

    I just bought and installed a USB 3.0 card. It is the Startech PEXUSB3S2 PCIe card. I installed the card in a PCIe 2.0 X 1 slot. The manual says it's exactly the slot, that it supports.

    The Manager device displays NEC Electronics USB 3.0 Host Controller and NEC Electronics USB 3.0 Root Hub are installed and are working correctly. I have a Thermaltake BLACX5G 5 G USB 3.0 hard drive caddy. The transfer rate is only 35 MB/s using the HDTune benchmark. It is a USB 2.0 speed.

    When the player is turned on, windows displays the message "this USB mass storage device can transfer information faster if you connect it to a Super speed USB 3.0 port»

    For some reason, the system doesn't see the caddy to drive USB 3.0 as being plugged into a USB 3.0 port, when it actually is.

    I remember having this same problem with Windows XP, when I bought a USB 2.0 card. The only thing that fixed it at the time was upgraded to XP SP2.

    This should not be a problem because I know that Windows 7 pro 64-bit supports USB 3.0.

    My motherboard is an ASUS P5QL-EM support an Intel Core 2 Quad and 4 GB of DDR2 memory. According to the manual owner the PCIe x 1 slots support architecture 1.0 and 2.0.

    Edit: I just tested the external hard drive and expansion card USB 3.0 on my motherboard Gigabyte of friends running Windows XP. Everything worked perfectly, no problems at all.

    Here, there is a problem with Windows 7 or the motherboard. Still unresolved, currently installs a floppy drive so I can update the firmware of my motherboard.

    I checked the implementation of the card several times, removed and installed in another motherboard to test, then removed and reinstalled again in my motherboard ASUS check several times for a fit course.  It still does not work. I have just completed update the firmware of the motherboard with the latest version, and I also did a new install of Windows 7, install the drivers USB 3.0 immediately after installing Windows over. None of this solves the problem.

    I'm running out of ideas on how to fix this without doing something drastic as a replacement for my motherboard. I don't want the speed of USB 3.0, but I don't think I'm ready for an another two or three hundred dollars to get it.

    I've been all over the ' net trying to find a solution and read tons about USB USB 3.0 specifically and in general. I can find no reason why the drivers would install and report that they are working correctly, but fail to connect to 3.0 speeds. I think that this would generate a certain type of error instead of such a strange symptom.

    EDIT:

    Here go us. I knew that is was a bad idea to buy one main (ASUS P5QL-EM) card that had to be overclocked to 1066 MHz for DRAM memory. I did all this work, and every time I reset my BIOS or updated it would always be the frequency DRAM back to where it should be (1066). After a reset of the computer was the starter and I just let it start instead of setting the DRAM frequency and, suddenly, USB 3.0 card worked perfectly. I confirmed this by setting the frequency to 1066 and looking at the USB 3.0 card fail again. I guess it must have something to do with the clock being sent to the PCIe bus.

    In any case, the USB 3.0 card works perfectly and gives me a transfer rate HD Tune to 99 MB/s on a drive from WD SATA 7200 RPM and 86.1 Mbps on a Samsung drive hard 5400 RPM / MIN 3,5 "SATA. These are the same reference points I get when these drives are connected to my internal SATA connectors. I'd say USB 3.o works perfectly now and maxing out the hard drives performance.

    Thanks for any help.

  • Receive the error message"this device can perform faster if you connect it to a 2.0 port" in the taskbar

    In the taskbar, this always happens "this USB device can perform faster if you connect it to a 2.0 port" and is a list of the USB Composite device. How can I prevent this arise?

    Hello

    1. Once you get this error message?

    2. it happens with all USB devices or is this a problem with a specific USB device?

    3. has the USB works well before camera?

    Method 1 : perform the following steps to stop this message from popping and check whether the problem is resolved or not.

    has. in the search box Type Device Manager start and click on enter.

    b. find now the option called Universal serial bus.

    c. now right-click on it and select search the hardware changes.

    Method 2 : run the troubleshooter of material and check if the problem is solved or not.

    Open the hardware and devices Troubleshooter

    Hope that helps.

  • v machines are very fast, but so slow network. Advice appreciated...

    Hi all

    I recently installed VMware ESXi 3.5 U3, 123629

    Before getting into the details about the problem I'll give you the specifications that you may want to know

    Motherboard: Supermicro X7DB8

    Processor: 2 x intel LGA771 dual core XEON 3 .2GHz

    Memory: 4 GB

    Storage: Adaptec Ultra320 SCSI RAID card 2020ZCR with 6 32 GB drives in a RAID 5 Configuration configuration

    Network: network FULL DUPLEX 4 x 1000 MB connections (a 80003ES2LAN Ethernet controller built on the motherboard AND a 8254NXX, add in the card installed)

    Everything about the installation was quick and easy. I currently have 3 virtual machines installed.

    computers virtual boot very quickly. pretty much everything on ESXi performance is exceptional. In the console windows pop up when you click them in the start menu as if they were physical boxes.

    BUT

    the one caveat is the network performance...

    I searched these forums looking for answers but have not found anything that solved the problem.

    Here is what I tried, from advice in this forum...

    -


    I enabled HyperThreading in the VI Client and enabled HyperThreading in the BIOS

    I have enabled HyperThreading in the VI Client and disabled HyperThreading in the BIOS

    I've disabled HyperThreading in the VI Client and enabled HyperThreading in the BIOS

    I've disabled HyperThreading in the VI Client and disabled HyperThreading in the BIOS

    and I went through VMwareWolf guide as well...

    When copying to or from a simple windows sharing, I can get about 5 MB a dry... that is terrible, if you consider my network hardware...

    I get the slightly better performance (about 6 MB/sec) if I enable HT in the BIOS and disable in VIClient (this is what its currently set to).

    During a copy operation, I saw my use of the material and on the tops of the cpu around 10%, so I don't think that its associated processor. Machines start and loading programs instantly so I doubt his performance of hard drive no more.

    Before moving to ESXi I was running VMware server 2.0 on windows server 2003 R2 and the performance of the network was very fast... so I am sure, is a driver/configuration problem

    Any help/Suggestions is appreciated

    Thank you

    Sledgezfx

    Hi, I'm running into a similar problem regarding slow speed, but I've seen it happen when I copy things locally, what caught my attention, is that you get the slow speeds when the copy of a VM on another virtual computer on the same host, as someone that should not leave the vSwitch. Pls try to copy the same file from one folder to another on the same drive and tell me how fast are you...

    Thank you!

  • Suite pretty shady and very disappointed that you are associated with this kind of practice.

    I don't have a question about my computer, but I don't want to report something. Yesterday, I had a question about why my download of Firefox don't are not remained loaded when I rebooted. I clicked on support and attached to a man such a strong accent, I had to ask her to repeat things 2 or 3 times. That's what was wrong: after I explained my problem, it took a very long time and finally said: I can help you with that, but need to access my computer remotely. He then proceeds to criticize what I had on my desk, which was of some science lab equipment that I put in a spreadsheet for my science class, but was not his business and had nothing to do with why I couldn't get Firefox to download correctly. Then he put me on hold to check something, came back and explained that I had to have my computer checked every four months and they could do that for a small fee. I said, ' what? No! I already have Apple Care Extended." He said he could help to solve my problem, I said 'OK?' but then, he said, it would be for a small fee. Quickly, I didn't say thank you. Come to find out, all I had to do was do drag the Firefox icon in the folder of the Aps. So, it's not cool. And I am very disappointed to see that you all would tolerate this practice. This is NOT supported, this is a scam!

    Where did you find the so-called Mozilla or Firefox Support?

    Mozilla does not connect to the computer of anyone, nor especially require anything for such person on a support. Like most open source companies, Mozilla doesn't do phone or send a mail.

    Hmm you are looking for Firefox Support through Google? because they have Google ads above the actual search results, and many of them, I found fits your description. None of these Google Ad links are affiliated with Mozilla.org somehow.

  • Firefox is very slow when you use RDP

    Firefox is fast when you use Windows directly. But when you use RDP it is very slow. For example, empty new tab takes about 6 seconds to open. The RDP connection is fast and another response programs immediately (for example the same page navigation in IE is fast).
    What is the problem with Firefox?

    Could it be the graphics hardware acceleration?

    You will need to probably restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.). On the remote system:

    Orange Firefox button or classic menu Tools > Options > advanced

    In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

    Then restart Firefox. Does make a difference?

  • Qosmio F30-112: cooling fan runs very fast

    Hello

    I want someone ask them, my computer laptop qosmio F30 - 112 recently whenever I start my computer, I heard that the cooling fan runs very fast (I mean) it wasn't stop differently than before his execution smooth only I heard when I play games but not continuous, then after that my computer now running slow.

    Can someone help me what im going to do?

    Thanks: rtmasagca

    Hello

    F30 is a little older series laptop I think about 3 years or more... you cleaned the cooling modules in the meantime?
    I think there is a lot of dust and debris inside the laptop and I think that keeps air from traffic and therefore fans run faster.
    Try the compressed air jet that should help to remove dust and debris.

    Good luck

  • How can I find answers uysing the help section?

    Cannot finance all of right answers than after 90 responses sound nothing like what I asked. So why do we get bad service from the help section? Why Micrtosoft not won't find us abnswers on our own? In all formats associated previous if xp or office 2003 - why could find answers with new p-plus but nopt tyhose?

    I do not know what help you are referring to with the words 'article' but I found that I get better results from the following site http://windows.microsoft.com/en-US/windows7/help I do using "Windows Help and Support" on my computer.

Maybe you are looking for

  • ATI Catalyst Control Center

    I have a desktop HP TouchSmart has 520-1160. Just upgraded to Windows 8. He tells me that the Catalyst Control Center is not compatible with Windows 8. Where and how to change it? Thank you, Irene

  • X 230 change German keyboard at the United States International

    I got a x 230 with German keyboard, but I want to change that and use an International keyboard place us. Is it possible to replace the keyboard?

  • Automatic brightness adjustment is missing (Acer iconia Tab 10 A3-A20HD)

    Hello I had an Acer Iconia Tab 10 A3-A20HD. I installed all available (4.4.2) updates and configuration of the tablet. When installing, I recognized that the Auto-brightness Option is missing in the display settings. It is also not possible to activa

  • SQL Server 2005 Management Studio Query Export to CSV to the Non Unicode Format

    In SQL Server 2005 Management Studio, click the part of the results of a query.  Click on "save results under...". ", select CSV and an output file. The output is in unicode format. How can I fix this in ASCII? Jim Oliver

  • Toshiba tempro v 2.0

    I try to install toshiba tempro on my computer toshiba laptop, but when it comes to accept the privacy policy, that it takes so long to connect to toshiba vista it closed so I'm not about to use it, this is the version tempro update how to make it wo