Issue of ACS upgrad

Similar Questions

• Portege R600 - issue of SSD upgrade

  I have a R600 10 q and I am interested to put an SSD in to replace aging / slow HDD have had a look at what others have said and there seems to be some compatibility issues.

  We know if these have been fixed with the new BIOS updates? or is there a list of compatible drives?
  Have a been a success with a particular model?

  Thanks for the help
  Tim

  I agree with Akuma.
  The use of SSD drive should not be a big problem.
  If something does not work, try to update the firmware of SSD drive for the last s.
  In most cases, this action has resolved most of the problems

  Since the Portege R600 supports a SATA controller, the SSD drive should support the same standard of controller.

  Good luck and thanks for sharing your experience after upgrading the SSD drive

• Issue of the upgrade to Vista - Satellite A100 (PSAA9)

  Hello.
  Well, I think to upgrade to windows vista from my laptop (Toshiba Satellite A100 (PSAA9)). I was researching (little) on the drivers and hardware compatibility with vista, and it seems that if I update now, I can't find major problems. Is this true?
  I ask because when I was looking for drivers for vista, I found many (and some of those that exist, I can't download them!) But even without a driver, vista will recognize and install drivers 'default' for the material of my laptop? Can someone answer this with some?
  My major concern is connectivity: lan and wireless! I'll be able to install the hardware drivers to operate these two things?

  Thank you very much to all those who somehow tries to help with these issues!
  Good bye.

  Hello

  I upgraded my and installed all the drivers from the card reader SD me just used for XP drivers and they worked very well. There are a lot of vista drivers now available for this model, although I am having trouble with the value added package to allow me to use the function keys and access keys.

  Apart from that, I had no other problems!

  Good luck... Let me know if value-added package that works for you, seems to be working for some but not for others.

  See you soon

  Gareth

• The ACS upgrade to 3.2

  Greetings,

  By opting for the ACS 3.2, all my settings and the securities will remain the same? If this isn't the case, I have a router connected to the server and I will get locked. I heard there is a specific order for the removal of the lines to avoid of locking me. Is this true?

  Thank you

  You will need to select the option "Yes, import the existing configuration", while improving the ACS software. Information on the upgrade of Cisco ACS software Preserving Configuration found in the documentation to

  http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacs4nt/ACS32/win32sig.htm#9934

• Issue of license upgrade: Windows XP Home - > Win7 Pro?

  Microsoft licenses allow an install WinXP Home to upgrade to Win7 Pro through the 'Upgrade' of Win7 Pro edition?

  Thank you

  Microsoft licenses allow an install WinXP Home to upgrade to Win7 Pro through the 'Upgrade' of Win7 Pro edition?

  Thank you

  Yes, Windows XP Home Edition can be an eligible license, but you will need to do a custom installation, there is no direct upgrade path from it.

  The upgrade to Windows XP?

  
  

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  
  

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  
  

  
  

  
  

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

• ACS Upgrade License required?

  Hello

  in our environment, we have two ACS installed on W2K3 Server. We must move from version 4.2 (0) build 124 to free 4.2.1.15 - 4.

  Can someone tell me if a license upgrade is required?

  Thank you very much!

  Leo

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/Release_Notes/acs421_rn.html#wp999055

• Issue trying to upgrade to EE XE

  I am trying to upgrade my Oracle 11 g R2 Express database in Oracle 11 g R2 Enterprise using the discharge of import and export. My OS is Windows Server 2008 R2. I have now two versions installed on the server. I want to get a new export data of XE because users took more data that I did the last dump. The issue is I can not connect to the XE more using SQL Plus, but I can connect to the company. Versions are using two different directories and have separate services. Anyone know what could cause this? I want to just get a new picture of the XE data and import it into the company.
  
  Thank you

  Hello

  Its because there is no set ORACLE_HOME,.
  You have installed the EA version on same server could me the PATH variable would change and its stressing new ERA at home,
  Your step to loging on XE Db would be, set the ORACLE_HOME/ORACLE_SID in command prompt which should report it to your old house XE.
  and then try to connect

  HTH

• Issues of update/upgrade of equipment for Tecra S10-183

  Hello

  TOSHIBA TECRA S10-183
  Serial number: xxxxxxxxxxxxxxxxxxxxx
  Model number: PTSB3E-0YR04KGR
  Code BTO: P8700/2G/160G/15.4WBT/DS2/L/M/B/W/3G
  Pre-installed software: Yes [R11382GR]
  Purchase date: 13/05/2011

  I use above professional mobile phone use for CAD programming as well as for Office applications.
  2 GB RAM (standard), I can increase up to 4 GB Kingston (ex aequo) on purchase.
  With the 160 GB HARD drive, I had a lot at the beginning of the loss of speed.
  So I leave a month later to a switch of OCZ Vertex 120 GB of a second
  And lasted almost 9 months without problems.
  Now, I don't have so much free space in my SDS. So I would like to
  'Intel SSD 520 Series 240 GB 2.5 SATA III'
  Skip the leave.

  My question would be, I would get this problem?
  (1) in theory, SATA3 work perfectly well this SSD 240 GB right?
  In the manual, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

  (2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
  Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

  (3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?

  (4) can I switch to a processor / CPU? What size?

  (5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?

  (6) I still can't be on the Toshiba support site:
  http://de.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/
  find when you enter the serial number or model number is not my laptop?

  On a response, I would be very happy.

  Sorry for the bad English. My language is German!

  So I hope that someone can help me with my questions.

  With sincere friendships.

  Etem Basoglu

  > 1) in theory, SATA3 work perfectly well this SSD 240 GB right?
  > Manually, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

  The SATA controller is not limited in size, you can use 250 GB, 500 GB or more large hard disks. The same should be possible with SSD drives since the controller is the same.

  (> 2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
  > Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

  Don't know what you mean exactly, but if you want to installed Win 7 64 bit, then you can do without big problems the 64-bit drivers are available on the European driver Toshiba page.

  (> 3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?
  The laptop seems to be equipped with a NVIDIA Quadro NVS 150 M chip graphic. This is an external chip that is connected/soldered on the motherboard. But even if you can remove this chip, the upgrade is NOT possible.

  (> 4) can I switch to a processor / CPU? What size?
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  Generally the CPU upgrade depends on the chipset of the motherboard.
  You could upgrade the processor, if the chipset would support the new processor.
  There are still questions about BIOS support, but I've read here in the forum that some people have been able to upgrade the new processor.

  (> 5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?
  Support for 3G modules appears to support the HSDPA standard

  (> 6) I still can't get on the Toshiba support site:
  > http://de.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
  > find when you enter the serial number or model number is not my laptop?

  Maybe it is not inserted into the database, but your Tecra S10-183 belongs to the series of PTSB3E that you can search other models belonging to the PTSB3E for details

• (Redirected) The motherboard - issue thermal ventilation upgrade Active

  Hello

  I think the upgrade from my old Area 51 (if I remember well that was the chassis of the Lunar shadow of 2010)

  I am concerned about the heat evacuation Active on the top of the base, if I put in a new generic motherboard, will be evacuated in the upper part of the chassis remains open? (they have a default open state?) I guess there is nothing to connect to on the new Board of Directors, unless she uses an internal USB

  Any advice is greatly appreciated on this

  Thank you in anticipation

  Andy

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Acrobat 8 or 9 with Windows 7 64 bit - printing issue: new installation, upgrade to Vista.

  Acrobat does not print using the PDF Converter.  I can print a PDF file on a conventional printer (not), but when you use printing > Adobe PDF as the printer selected, nothing happens. As a result, cannot make PDFs of web pages etc.  There is a problem reported by the AdobePDF.dll_64, during the installation.  I downloaded that separately and reached a complete reinstallation of 8 from Adobe, which previously worked perfectly on Vista.

  Try this first: http://www.sevenforums.com/software/2092-adobe-cs4-under-7-x64-pdf-printer.html

  Error "the file AdobePDF.dll is needed..." "When you install Creative Suite 3 on 64-bit (Windows 7 64-bit) Windows Solution

  Manually extract the 'adobepdf.dll_64 ' of the file data1.cab file before installing Acrobat. When the prompt appears, navigate to this file and select it.

  1. Navigate to the folder that contains the file setup.exe to your installation of Acrobat 8.
  2. Locate the file "data1.cab" and open it (this may require a third-party compression utility, such as WinZip).
  3. Inside the content list, locate the file "adobepdf.dll_64" and copy it to your desktop.
  4. Run the program setup.exe installation and when the prompt appears, select Browse and select the file that you copied to the desktop.
     Note: If the file cannot be selected, change the file type drown down in the dialog box to "All files", or rename the file "adobepdf.dll" by removing "_64" from the end of the file extension.

  http://kb2.Adobe.com/CPS/401/kb401731.html

  More information

  Because the Adobe PDF printer is not supported on 64-bit operating systems, version 64 bits of the AdobePDF.dll does not get extracted during installation. So, the installation program is unable to locate him. Although Acrobat is installed, the Adobe PDF printer will not install. Following the update procedure above will address the issue.

  333360 : support policy for Adobe Acrobat (8.0.x Windows x 64)
  333780 : support policy for Acrobat 7 and 8 on Windows Vista

  Questions about installing Windows 7? Read this:
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Issue of ASR9K - Upgrade 4.2.3 to 4.3.4 - VRRP

  Hi all

  After upgrading 4.2.3 to 4.3.4 when faulty configuration checking, I found the following question about VRRP:

  RP/0/RSP0 / CPU0:A9K - #sh configuration LAB02 failed start
  Mon May 5 16:24:19.094 WEST
  !! 15:13:09 UTC Monday, may 5, 2014
  !! The SEMANTIC ERRORS: This configuration was rejected by
  !! the system due to semantic errors. The individual
  !! errors with each configuration command has failed can be
  !! found below.
  
  router vrrp
  interface TenGigE0/0/0/0.3701
  ipv4 address family
  VRRP 1
  priority 200
  !! % "vrrp" detected the condition 'Warning' "Virtual MAC already in use on this port"
  timer 1
  !! % "vrrp" detected the condition 'Warning' "Virtual MAC already in use on this port"
  address 200.100.1.100
  !! % "vrrp" detected the condition 'Warning' "Virtual MAC already in use on this port"
  !
  !
  !
  !
  End

  According to bug CSCed75140, I expect this problem to be solved from 4.3.0...

  Any idea?

  THX,

  Pedro

  Pedro,

  There must be a bug missunderstand you cite is to improve the notification of error with this unsupported configuration, it does not the config caught in charge. Some details on this question since the release of bug notes:

   Problem Symptom: In a router running IOS-XR, configuring the same virtual router id(VRID) on multiple sub-interfaces of the same physical interfaces is NOT supported for HSRP/ VRRP Workaround: Use different virtual router id for the different sub-interfaces of same physical interface Further Problem Description: Example of unsupported config:  router vrrp interface GigabitEthernet0/5/0/38.175 vrrp 1 ipv4 10.186.0.1 ! interface GigabitEthernet0/5/0/38.176 vrrp 1 ipv4 10.186.0.9 ! !  If you have two groups configured with the same virtual router id, this means that they have the same virtual MAC address (as this is derived from the virtual router ID). When VRRP is in Master state, it installs an entry for it's virtual MAC in to the MAC filter for the interface over which it is running. However, it is not possible to program the MAC filter per sub-interface. Therefore if VRRP is running over a sub-interface it is the MAC filter of the underlying physical interface which is actually programmed (although VRRP has no way of being aware of this). If using the unsupported configuration, you have two Master groups with the same virtual MAC address on sub-interfaces of the same physical interface. In this case there will only be one MAC address installed in the filter of the physical interface. When one of these groups is removed by configuration or it transitions out of Master state, it removes its virtual MAC address from the MAC filter of the underlying physical interface meaning there is now no MAC address installed at all and the VRRP feature for the remaining Master group will no longer work. The root cause of the problem is that the MAC filter cannot be programmed per sub-interface.

• Issue of ACS Windows Agent

  Hello

  Just, we have improved our 3.3. ACS to the latest version without problem. I created the Remote Agent on GBA, but we I install the Agent on the Windows 2003 Server I get "could not initialize variables. Anyone? Thank you.

  John

  John,

  -Log on to the computer as long as Local Administrator, preferably 'administrator' and then try to uninstall the Remote Agent & try and install back. Log on locally to the box and install the AR.

  -If above does not work, you may need to manually uninstall the Remote Agent. After uninstalling, you can try to reinstall the latest version of the remote agent.

  somishra

• Issue of ACS UCP

  I have ACS, IIS & UCP installed on the same Windows 2003 server. UCP has been installed recently. IIS configuration was made before the installation of the UCP.

  After installation I tried to UCP accessing through the URL http://localhost/secure/login.htm

  I get the login prompt. When I enter the user name and password, I get "cannot display page" Web page. Please let me know the resolution for the same thing.

  1. make

  2. make

  3. making

  4. make

  5 fact

  6 do

  7. do

  8 do

  9 - restart windows 2003 Server

  10 - from the ACS itself, server launch https://server/secure/login.htm

  11 - the Cisco Secure ACS UCP Application looks:

  12. Enter an ACS useraname user and password:

  It is said:

  The page is not found

  The page you are looking for has been removed, had its name changed, or is temporarily unavailable.

  Error HTTP 404 - file or directory not found.

  Internet Information Services (IIS)

  More ideas? Thank you.

• THE ISSUE WITH ACS REMOTE AGENT LOG

  Hello guys,.

  I installed a Cisco ACS SE with version 3.3. I try to configure for sendo journal acs agent remotely, but it does not work. I installed acs remote agent and I activated the registration service during the installation. ACS appliance may communicate with the remote agent, but ACS cannot write logs on the Remote Agent. If I look at logg on ACS its OK, but when I look at the logs on the Remote Agent Windows there is nothing there. Could someone help me?

  Thank you

  Hello

  Please try logging configuration remotely as shown in the link:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/3.3/user/guide/r.html#wp952633

  Kind regards

  Anisha

  P.S.: ACS 3.3 is out of life and support. Please install the latest version.

• Issue of license upgrade

  What we have:

  vSphere 4.0 Standard + svMotion with an active SnS.

  vMotion was purchased at the map with VI3 and upgraded to svMotion when we moved to vSphere.

  About vSphere price guide only, I can upgrade to 4.1 Advanced or enterprise + and I must pay for it in both cases.

  My questions are:

  1. don't we have to pay to go to 4.1?

  2. are there differences between our Standard and advanced version. I can't found.

  
  AWo
  
  VCP 3 & 4
  
  \[:o]===\[o:]
  
  = You want to have this ad as a ringtone on your mobile phone? =
  

  = Send 'Assignment' to 911 for only $999999,99! =

  > 1. Do we have to pay to go to 4.1?

  N °

  > 2. Are there differences between our Standard and advanced version. I can't found.

  Add hot

  vShield Zones

  Fault tolerance

  Virtual serial Port concentrator

  DataRecovery

  ---

  MCITP: SA + WILL, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru