Issue of ASA 5540 and secure desktop Configuration

Similar Questions

• Forgotten issue of Smartphones, password and security blackBerry

  Hello

  I have a real dilemma. Not only I seem to enter a wrong password, but I forgot as truly the question of safety.

  I wanted to subscribe to BlackBerry messenger (not necessary not previously) and also got stuck trying to use my BlackBerry Playbook.

  Is there a solution when I seem to have incorrect information for both?

  Helen

  Hello and welcome to the community!

  There are several different security credentials in the world of the BB... but what you have said, I guess you're saying your BlackBerry ID. Therefore, start first with these please:

  • KB28685 How to reset the BlackBerry ID password by using the password recovery question
  • KB32111 "The link is no longer valid." occurs when you attempt to reset a BlackBerry ID password
  • KB26361 How to change or reset the BlackBerry ID password
  • KB28111 Impossible to reset the BlackBerry ID password when using a hosted BlackBerry email address
  • KB28232 Reset blackBerry ID e-mail are not delivered to the mailbox associated with

  If you have forgotten your ID BB credentials AND access non - BB (for example, Outlook, webmail, etc.) for the e-mail account which is currently configured on your account ID from BB, then these instructions should allow you to recover access to your account ID from BB.

  However, if you do not have access to this e-mail account, then your challenge is much larger, and you have a choice to make depending on your situation:

  1. If you have no AppWorld records you need to keep (for example, buy folders for the applications), then simply drop the BB ID and create a new. To do so, however, requires a device WIPE:
     • KB26694 How to change the BlackBerry ID on a BlackBerry smartphone or BlackBerry PlayBook Tablet
  2. But, if you do not have AppWorld documents that you need to keep, then you need human intervention. To receive, you must ring to the top of your mobile service provider and convince them to escalate your case up to BlackBerry. In addition, you must convince BlackBerry you with a solution - which probably will be reset your current BB ID so that you can access it again or you will need to create a new BBID and they will manually move your purchase to the wire records. Note that I don't know if they will be willing to do, but there is no other way I know of to keep your prior AppWorld purchase records.

  Good luck!

• Issue of ASA NAT and routing

  Hello

  I have a question about NAT and routing on the SAA. I'm relatively new to ASA and don't know if it works or not. I have a pool of public IP (209.x.x.x/28) that routes my ISP to the external interface of my ASA. IP was assigned address for the outside of the ASA is an address of 206.x.x.2/24 with a default GW of 206.x.x.1. I intend using NAT to allow my web/mail servers on the DMZ (192.168.x.x) use 209.x.x.x addresses. However, I do know how to make it work since I'm not arping on any interface for 209.x.x.x addresses as they will be sent to the 206.x.x.2 address by the ISP. Can I just set up a translation NAT (on the external interface?) of the 209.x.x.x on 192.168.x.x address and the ASA will figure it out?

  Thanks for the help.

  Todd

  The ASa will figure it out, he will answer ARP queries for all that he has set up in a "static" command As long as th PSIA routes 209.x.x.x directly to the ASA addresses then it should all work fine.

  You just need to add lines like the following:

  static (dmz, external) 209.x.x.x netmask 255.255.255.255 192.168.x.x

  for each of your internal servers in the DMZ. Then an access-list to allow only HTTP/SMTP/etc through these addresses 209.x.x.x.

  list of allowed inbound tcp access any host 209.x.x.x eq smtp

  list of allowed inbound tcp access any host 209.y.y.y eq http

  Access-group interface incoming outside

• ASA Anyconnect and Posture assessment

  Hello

  I have read the configuration guide Cisco ASA VPN ASDM 7.2 and also the Anyconnect Client Admin Guide 4.1 and can't find a clear answer as to how to implement assesment of endpoint.

  I see options for the use of the Module of Posture AnyConnect, HostScan and Secure Desktop. They appear on the page to download the Cisco software as

  separate downloads be prédéployées customers. I have a client who wishes to also VPN connections without client on the SAA to have an evaluation of the endpoint.

  I don't know what software to use three options, or how it should be deployed to the client, or client VPN connection. If anyone has all the answers to what precedes, or can point me to a link with the information, I would be grateful.

  Thank you

  Jim

  Without client by definition means we do not have any software installed on the client. So the Module of Posture AnyConnect can not be used for Clientless SSL VPN.

  HostScan and Secure Desktop are modules of execution if they can be invoked for connections without client.

  Note that this are not very actively developed and will probably eventually deprecated. Cisco tries to refer clients to a solution complete including the ISE and the AnyConnect ISE Posture of the AnyConnect Client module option ensure complete mobility.

• How can I get an ASA 5540 return to the default configuration?

  Is there an easy way to re-apply the default that comes with a new ASA 5540? I would like to have the our ASA 5540 to return to its default to 192.168.1.1 inside the interface and act as a DHCP server, so I connect a PC to start the initial configuration using the ASDM.

  The ASA 5540 is running on asa723 - k8.bin.

  factory default setting

  http://www.Cisco.com/en/us/docs/security/ASA/asa72/command/reference/c4_72.html#wp2039866

  a simple "write erase/recharge" would also do the trick.

• Step how to configure ASA 5500 Series Security Services Module-10 (model: ASA-SSM-10)

  Dear support,

  I need to configure Security Services Module-10 (model: ASA-SSM-10) on my ASA 5510 firewall. Could you provide configuration step and how to connect to the module?

  Here is the information on the module

  ciscoasa (config) # sh Details of module 1
  The details of the Service module, please wait...
  ASA 5500 Series Security Services Module-10
  Model: ASA-SSM-10
  Hardware version: 1.0
  Serial number: JAF1115066U
  Firmware version: 1.0 (11) 2
  Software version: 1.0000 E1
  MAC address range: 001a.e268.5aa9 to 001a.e268.5aa9
  App name: IPS
  App status. : to the top
  App status. / / Desc:
  App version: 1.0000 E1
  Data of aircraft status: Up
  Status: to the top
  Mgmt IP addr: 133.1.9.144
  Web to MGMT ports: 443
  Mgmt TLS enabled: true

  your help is very appreciate.

  Thank you

  Best regards

  Hi Sothengse,

  Please find the samlpe on AIP SSM module configurations. You can go through this to begin with.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  https://www.YouTube.com/watch?v=FgYU5ZXwk4g

  Concerning

  Knockaert

• In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers.  How can you bypass those to change your settings?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  
  (140233)

• How can I open [control configuration\systeme and Security\System] (computer properties) of an execution command?

  I looked around and can't seem to find the answer to this. How to open the properties of the computer [control configuration\systeme and Security\System] (aka system CPL) with a command?

  Oh, I'm sorry, I did not understand what you want.  Try this in a command prompt window or start > run box:

  Control/Name microsoft.system Boulder computer Maven
  Most Microsoft Valuable Professional

• My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

  Original title: upgrade a "Fix" for existing system problems?

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

  Hello

  1 re-installing/repairing software will not fix hardware issues.

  2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

  3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  We really need for more details:

  "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  See you soon.

• ASA fire services and security context

  Hello.

  We have an old asa 5510, and we would like to change with a new x 5525 asa with services of firepower, using the fueatures IPS.

  In the firewall of the production, we organize 6 security contexts; so the question is: If buy us this product, we can use IPS FirePower feauters in any security context or do we not have limits?

  Thank you

  Daniele

  The only restriction is that one set of politics of power must be applied for all contexts will share policy.

• Dell Precision M4700 (Windows 7 pro) starts not once configured with UEFI and Secure Boot

  To all those who can help you:

  I got a Dell Precision M4700 and I update bios A05. I was intending to move to Windows 8. Everything was fine and the bios update was successful. I started the new bios under Windows 7 Professional (base OS) factory-installed and was very good.

  However, I can't get into the bios (not even see the POST from Dell or Logo) after I activate the UEFI and Secure Boot.This before I update to Windows 8 Pro. Now I'm stuck with a blank screen (same LCD not lit) and nothing to start. It's like a dead PC.

  Help, please. Is that what I can do or should I contact Dell Support for repair?

  Thank you

  I fixed it!  Just removed the CMOS battery, the BIOS got reset back to factory default.  So I did:

  (1) remove the battery

  (2) press the power button to the case of ground

  (3) remove the lower panel

  (4) disconnect the CMOS battery (it's tedious)

  (5) I hit the power button for some time (30 s) to clear the capacitors or something else, it was my theory, but I doubt it's necessary

  (6) use it to all back to the start

  When I turned it on it turns on and turns off several times before finally stay standing and I was then able to enter the BIOS and all the settings have been restored to factory default.  I am new to Windows 7 on my machine so I'll repeat the process, this time without disabling the legacy option roms!

  Here is the disassembly for precision M6700 and M4700 instruction manual if anyone needs:

  http://support.euro.Dell.com/support/eDOCS/systems/wsm6700/en/OM/om_en.PDF

  http://support.Dell.com/support/eDOCS/systems/wsm4700/en/OM/om_en.PDF

  I was talking about the Dell support problem and the guy said he would talk to his superior and see if something needs to be done, so I guess we'll see if something happens.

  I hope it works for you!

  Ben

• Secure desktop replacement

  Hello community!

  I was trying to implement some policies of conection for AnyConnect and it says I have to install Secure Desktop, but it seems that is no more a possiblity for what I found here: http://www.cisco.com/c/en/us/support/security/secure-desktop/tsd-product...

  Is there a new solution, the solution or the steps I have to follow?

  Thank you.

  Rolando Valenzuela.

  Hey Rolando,

  Can you please explain what you are trying to accomplish. CSD is now obsolete and HostScan function is used these days and features relatively more to limit the users for the VPN connection.

  Here are a few good reads for HostScan configuration:-
  https://supportforums.Cisco.com/document/74681/how-configure-AnyConnect-host-scan

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa90/configuration/guide/asa_90_cli_config/vpn_hostscan.PDF

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Site to Site VPN between Cisco ASA 5505 and Sonicwall TZ170

  I'm trying to implement a VPN site-to site between our data center and office.  The data center has a Cisco ASA 5505 and the Office has a Sonicwall TZ170.  I managed to configure the two so that the vpn connects.  Each of the firewall I ping the IP Address of the internet firewall on the other side and a desktop computer I can ping the IP Address of the firewall internal datacenter but I can't carry traffic between private subnets datacenter and desktop.  Can anyone help?

  The config below has had IPs/passwords has changed.

  External Datacenter: 1.1.1.4

  External office: 1.1.1.1

  Internal data center: 10.5.0.1/24

  Internal office: 10.10.0.1/24

  : Saved
  :
  ASA Version 8.2 (1)
  !
  hostname datacenterfirewall
  mydomain.tld domain name
  activate the password encrypted
  passwd encrypted
  names of
  name 10.10.0.0 OfficeNetwork
  10.5.0.0 DatacenterNetwork name
  !
  interface Vlan1
  nameif inside
  security-level 100
  10.5.0.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  1.1.1.4 IP address 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS server-group DefaultDNS
  buydomains.com domain name
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  inside_access_in list extended access permit icmp any one
  inside_access_in list extended access permitted tcp a whole
  inside_access_in list extended access udp allowed a whole
  inside_access_in of access allowed any ip an extended list
  outside_access_in list extended access permit icmp any one
  outside_access_in list extended access udp allowed any any eq isakmp
  IP DatacenterNetwork 255.255.255.0 OfficeNetwork 255.255.255.0 allow Access-list extended pixtosw
  pixtosw list extended access allow icmp DatacenterNetwork 255.255.255.0 OfficeNetwork 255.255.255.0
  IP OfficeNetwork 255.255.255.0 DatacenterNetwork 255.255.255.0 allow Access-list extended pixtosw
  pixtosw list extended access allow icmp OfficeNetwork 255.255.255.0 DatacenterNetwork 255.255.255.0
  outside_cryptomap_66.1 list of allowed ip extended access all OfficeNetwork 255.255.255.0
  outside_cryptomap_66.1 ip OfficeNetwork 255.255.255.0 allowed extended access list all
  outside_cryptomap_66.1 list extended access permit icmp any OfficeNetwork 255.255.255.0
  outside_cryptomap_66.1 list extended access allowed icmp OfficeNetwork 255.255.255.0 everything
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP verify reverse path to the outside interface
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 623.bin
  don't allow no asdm history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Route inside 0.0.0.0 0.0.0.0 1.1.1.1 1
  Route OfficeNetwork 255.255.255.0 outside 1.1.1.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 10.5.0.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-aes-256 walthamoffice, esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto dynamic-map ciscopix 1 corresponds to the address outside_cryptomap_66.1
  Crypto dynamic-map ciscopix 1 transform-set walthamoffice
  Crypto dynamic-map ciscopix 1 the value reverse-road
  map dynmaptosw 66-isakmp ipsec crypto dynamic ciscopix
  dynmaptosw interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 13
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  lifetime 28800
  crypto ISAKMP policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  No encryption isakmp nat-traversal
  Telnet 10.5.0.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 10.5.0.0 255.255.255.0 inside
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd address 10.5.0.2 - 10.5.0.254 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP server 66.250.45.2 source outdoors
  NTP server 72.18.205.157 source outdoors
  NTP server 208.53.158.34 source outdoors
  WebVPN
  attributes of Group Policy DfltGrpPolicy
  VPN-idle-timeout no
  username admin password encrypted
  tunnel-group 1.1.1.1 type ipsec-l2l
  tunnel-group 1.1.1.1 ipsec-attributes
  pre-shared-key *.
  !
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  !
  context of prompt hostname
  Cryptochecksum:7f319172e5de9c0e550804a263f8e49e
  : end

  Mattew, obvious lack of education is the rule exempt from nat for your tunnel, your access list pixtosw is similar on this example, I assume that you have gone through this link, if it does not see the configs on both sides.

  Add the statement of rule sheep in asa and try again.

  NAT (inside) 0-list of access pixtosw

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008052c9d4.shtml

  Concerning

• The profile number vpn that can be created in cisco asa 5540

  Hi all

  Want to know if there is a limit to how many anyconnect vpn profiles that can be created in a cisco asa 5540? TIA!

  https://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa80/configuration/g...

  Maximum connection profiles

  The maximum number of connection profiles (tunnel groups) that can support a safety device is a function of the maximum number of concurrent sessions of VPN for the + 5 platform. For example, an ASA5505 can support a maximum of 25 concurrent sessions of VPN to 30 tunnel groups (25 + 5). Attempt to add a group of additional tunnel beyond the results of limit in the following message: "ERROR: the limit of 30 groups configured tunnel has been reached.

  Table 32-2specifies the maximum VPN sessions and profiles of connection for each platform ASA.

  Table 32-2 maximum VPN Sessions and profiles of connection by ASA platform

  	5505 database / security more	5510/base/security Plus	5520	5540	5550
  Maximum VPN sessions	10/25	250	750	5000	5000
  Maximum connection profiles	15/30	255	755	5005	5005

• ASA 5545 and Anyconnect Licenses

  Currently, we use several devices to Cisco ASA 5545.  Initially, we learned that we were automatically allowed using the Anyconnect Secure Mobility client with our ASA devices.   With recent security issues, we are trying to move to a solution that supports TLS 1.2, and it seems that anyconnect Mobility Client 4.0 will do exactly that.   My question is, the automatic authorization supplied with the unit of 5545 ASA include Client Anyconnect 4.0?   After an exhaustive search, I am still unable to find this information.   Also, is there an official document detailing exactly what licenses is part of 5545 device, with respect to other Cisco Software Solutions?

  Thank you

  David

  All * ASAs include two licenses AnyConnect Premium "free." Which is designed primarily for the evaluation, as most businesses need more two simultaneous remote access users. However, if that's all you need is free and fully functional. It was designed around the Client AnyConnect Secure Mobility 3.x and earlier offer.

  From 4.0, there is a new model of licence for AnyConnect. It is explained in the Guide of command AnyConnect. While it is not currently applied by technical means, use of AnyConnect 4.0 requires having a license to do so.

  For some additional supporting documents as you initially requested, see also "Feature Licenses" of the Configuration Guide of the SAA.

  * Some models do not support remote access VPN and either do not have the feature available or cannot use the license - for example ASA 1000v and an ASA working in multiple context mode.