Issue of BB - touchscreen-

Similar Questions

• 9.3 iOS bugs/iPhone 6 more

  I recently updated a few days ago and I had to restore the phone. The touch screen is unresponsive most of the time, but it is not frozen because all other keys work. It is difficult to remove the non-responsive apps. I got lucky with their removal through the storage management in the settings. Everyone suffers from the issue of the touchscreen?

  Hello OzzieDeath,

  Thank you for using communities of Apple Support.

  I understand your message that your touch screen is not responding. To resolve this problem, I would like that you please follow the steps in the article to support related to below.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  Take care.

• Siri setting not reminders, to open applications, etc.

  After a recent wipe and restore from iCloud, Siri is no longer always works on my iPhone 6, running iOS 9.2.

  I ran through all the usual remedies (restart, restore, wipe the settings, Siri on / off, etc.) without success. Apple has even replaced my phone, as it seemed to have the issues of response touchscreen, but the problem remained with the restoration of iCloud.

  Any ideas?

  DON'T:

  -does not open apps ("you don't seem to have an application named .")

  -will not be set reminders ("Uh, oh.") Something is not. Can try again you? »)

  -will not locate people find my friends

  -don't set a timer

  -do not place calls

  -does not create a text

  -will not show photos

  -don't give directions

  -will not be published on Twitter or Facebook ("I can't post this, because I can't fi a good connection.")

  -don't play music

  -does not email

  -don't set alarms

  -don't provide addresses

  -does not create a Notes

  -Don't light settings like Bluetooth

  -don't read Podcasts

  WILL BE:

  -will create the calendar events

  -will check sports scores

  -will make a booking with Open Table

  -will search for movies, but says they are far

  -check the weather

  -will search actions

  -conduct research on the web

  -answering Q & A "(how many ounces in a liter")?

  -will locate movies to buy on iTunes

  -will locate books to buy in iBooks

  Got a new iPhone 6 replacement of AppleCare and restored via iCloud backup.

  And have the same problem here.

  Siri recognize my command, think for a few seconds and then say "There are a few problems"

  Seems that Siri cannot start apps, or something like that.

• Sony Vaio faucet 11 - random touchscreen issues

  I bought a 11 Tap Sony VAIO (model SVT11213CXB number) and actually have experienced a similar problem with the touch screen as owners of Duo, but with the mouse cursor goes to the top right (instead of the left) of the display in landscape mode and clicking randomly.

  When I bought water from the tap in November, I updated the drivers and BIOS via Vaio Update, ran all the updates of Windows and then upgraded to Windows 8 to 8.1. All updated without problems or errors during the installation. The touch screen seems to randomly occur after the upgrade, but I must confess that I didn't have the tap water well before the upgrade to 8.1. If the question was probably there before the upgrade. I also ran all the patches from Microsoft for the Windows 8.1 "lousy mouse" question and still no change.

  After a lot of troubleshooting and research, I narrowed down it to the following:

  Problem driver or firmware 1.)

  IR or RF interference) 2

  3.) related material

  #1 seems the most likely in the Duo many owners have argued that the problem has been resolved by installing the N - Trig Duo feel software and drivers.

  http://Forum.TabletPCReview.com/Sony/55222-Sony-VAIO-duo-11-touchscreen-screen-problems.html

  But when I run the installer it errors saying that "N-Trig hardware was not detected. I thought then that maybe the update of the modified BIOS 12/17 watered the N-Trig firmware and the touch input was handled only by integrated Windows Pen and Touch. Mainly because the devices and Program Manager installs don't list anything marked "N-Trig. But I went to our Sony store and drivers listed for their display unit is the same as my config. A couple of owners of Duo set out this thread they encountered the same error. The N-Trig support forum suggests that cases where you receive this error during install it to contact the manufacturer of the device. But they only software and drivers for Windows 8 and not 8.1, so this could also be the cause of the error when installing (compatibility mode does not work).

  #2: I couldn't really test the theory of IR sensor that I can not understand how to turn off the sensor? It is possible that the sensor could be picking up interference and causing the random input touch screen (the Duo also has the IR sensor?). However, (with the selected hidden devices) Device Manager does not list an infrared device, only devices and printers or Vaio Control Panel? There are drivers that are installed, even if apparently it controls our fine TV using remote app from Sony. I guess I could just cover the sensor with tape, but I was hoping to avoid getting the sticky tape on the cover of my tablet.

  RF interference could be a possiblity, but doubtful. The tap water and the Duo have the same power to my knowledge card (I do not use a 3rd party power adapter, I use a Sony supplied with the appliance). However, I tested this theory just now leaving the Tablet unplugged during use and I still encountered the problem. I also tried it away electronic nearby, including my iPhone, but still no change. I thought also keyboard and mouse wireless, the tap water was the issue, but turn it off while the cursor is by clicking at the top right of the screen does not occur. External mouse and keyboards do not solve the problem either (without wireless, wired or bluetooth). I could not reproduce the problem on the touchscreen in the case, sometimes just at random and generally lasts no more than 10 seconds when it does.

  I had to move my taskbar to the top of my screen so that it does not close the window of program or browser that I work and instead just opening the window date and time repeatedly.

  I really hope this isn't #3 I have not had the time unit and will not exchange it for another and will not bother to send it in for repair. Especially since the owners in other threads Duo have had their screens replaced, only to have the problem reoccur. The owners of duo have also tried a full system refresh, only to have the same problem, so I'm not bothering with this track that I don't want to have to reinstall all my software again, reactivate licenses.

  Return to Best Buy holiday window expires on Jan 14, so if I don't get a response from Sony or get this resolved before then I'm probably just to take it back. I'm past an Apple Macbook Air for the tap water and even sold my Mini iPad I wanted a true all-in-one device. I was also counting on exchanging my iPhone against a Xperia from Sony Z1, but I'm hesitant examining the issues I'm having my first purchase of Sony.

  Overall I really like the direction that Sony goes with their products and want to stay with them, but I have to admit that the quality of the devices Apple and their response to the questions related to the products is currently unmatched. I hope Sony can deliver the same question, but I'm skeptical that a few discussions about this with the Duo go back to 2012, early 2013 with still no resolution or definitive answer as to why the Support of Sony.

  Yes, quite the question. It's probably an electrical interference or software. Out of curiosity, have you tried to test whether or not it engages with and without power cord? This seems like one of the things isolated by a few people then allows to rule that, at the present time. Second would be if you tried to calibrate the screen? There are instructions on how to do it here: https://us.en.kb.sony.com/app/answers/detail/a_id/37544/c/65%2C66/kw/37544.

  Let me know what happens and I'll see what we can do from there. Sony is a great place to get electronics but hiccups occur. My Duet works well and I didn't so far no problem with the touch screen.

• Yoga 3 14 inch touchscreen issues

  Hey guys first off im new to the cause of the community I just receive my first Lenovo about 10 days after using HP for most of my life. So far, I love it, everything is incredible sound obtained the i7 and Intel 5500 graphics that are a lot for what I can bring to the table. But I had two problems with it so far I have not managed to solve;

  1. somehow or another after the second day, I put my computer in which im assuming is "FN key lock" or something like that. F1 - F12 normally would require hold you FN to click, while features such as mute, volume up/down, brightness adjust, etc. would be free to click. But then, after the second day, it turned off and I prefer it as it was initially.

  2. this one is a little more serious. about 1 out of every 4 times I start up my computer, the touch screen starts to panic and act as if something is in contact with different inside: 20 seats, at the same time. I see the small circles of contact appear on-screen, when my hands are not even touching the computer. Of course when that happens it restores the computer useless cause what you click on and everything what I can do to stop it is to force close it.

  Any assistance or solutions would be appreciated, thanks guys!

  
  

• Upper left touchscreen issues

  I have been having problems lately with the upper left corner of my screen touch not resonding. You don't notice it until you try to access an application. Here is an example when I go to the game store and try to get into the settings area bars trhee in the upper left corner, it does nothing. I have to restart my phone every time and it works for awhile then I start having questions again. I was wondering if there was a way to recalibrate the screen to see if there's a glich. Any help would be appreciated. It does this with all that you have to use the touch screen in the upper left.

  
  

• Touchscreen issues Dell Inspiration 3521

  OK, so there's my spec

  Service tag ADMIN NOTE: maintain the label removed by privacy policy >

  Express service code ADMIN NOTE: kidnapped by the Express service code privacy policy >

  Computer model Inspiron 3521

  BIOS Editor Dell Inc.

  BIOS version A14

  Date of the BIOS 07/31/2015

  OS version Microsoft Windows 10 Pro

  Manufacturer Intel Core i3-3217U CPU @ 1.80 GHz

  Clock speed 1.8 Ghz

  L2 Cache size 256

  Type
  Description

  CD-ROM/DVD-ROM readers Microsoft Virtual DVD-ROM TSSTcorp DVD +-RW SU-208FB

  Disc players Hitachi HTS723232A7A364

  Graphics cards GPU Intel(r) HD 4000 AMD Radeon HD 7600M series

  IDE ATA/ATAPI controllers Standard SATA AHCI Controller

  Keyboards, mice & pointing devices Mouse Compatible PS/2 Compatible mouse HID

  Monitors Generic PnP monitor Default monitor

  Sound Devices Realtek High Definition Audio Intel(r) Audio display

  USB controllers Intel (r) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft) Family of chipsets Intel (r) 7 series/C216 USB Enhanced Host Controller - 1E2D Family of chipsets Intel (r) 7 series/C216 USB Enhanced Host Controller - 1E26

  MY question is - is it possible to relpace a normal display for a touch srceen? (or do I already or I don't know...) Please help as soon as possible I really need to know ;)

  The 3521 had both touch and non touch through his life - if you do not have a glossy screen glass panel, yours is not touch.

• screen iPhone touchscreen stop working after updating IOS 9.3.2

  My phone was working without any problem and update the IOS 9.3.2 jumps on my phone. I update my phone as I normally. Now, the screen touch freaking work not AT ALL!

  I tried a hard reboot I read MANY MANY MANY other users have this exactly the same problem. I tried to restore my phone and can't do same. Now my Itunes has decided on his OWN that is has an encrypted password that I NEVER put.

  I'm so SICK of Apple, trying to fix 1 thing in IOS updates only break 50 other things!

  Any help would be greatly appreciated. Technical support has been less helpful on the phone. They advised me to put out a follow-up movement in my privacy settings and it should fix the problem. It would be GREAT if the touchscreen works! Morans!

  iPhone 6, iOS 9.3.2,and WORSE NEVER UPDATE!

  I had problems with touch-screen with my iPhone 5 s immediately after the update to 9.3.2. It was very frustrating - the screen would bounce around to choose things that I wasn't tapping and scrolling fast and sometimes simply freeze completely for a few seconds. I've never had problems before update!

  I have not found how to fix 9.3.2,and but I managed to restore my OS to 9.3.1 (which solved the problem of the touch screen) until the next version of iOS comes out which will be hopefully resolve this issue.

  Here are the directions that I followed to roll back my iOS: http://www.gottabemobile.com/2016/05/16/how-to-downgrade-ios-9-3-2-to-ios-9-3-1/

• Touchscreen stop working after updating IOS 9.3.2

  My phone was working without any problem and update the IOS 9.3.2 jumps on my phone. I update my phone as I normally. Now, the screen touch freaking work not AT ALL!

  I tried a hard reboot I read MANY MANY MANY other users have this exactly the same problem. I tried to restore my phone and can't do same. Now my Itunes has decided on his OWN that is has an encrypted password that I NEVER put.

  I'm so SICK of Apple, trying to fix 1 thing in IOS updates only break 50 other things!

  Any help would be greatly appreciated. Technical support has been less helpful on the phone. They advised me to put out a follow-up movement in my privacy settings and it should fix the problem. It would be GREAT if the touchscreen works! Morans!

  I had problems with touch-screen with my iPhone 5 s immediately after the update to 9.3.2. It was very frustrating - the screen would bounce around to choose things that I wasn't tapping and scrolling fast and sometimes simply freeze completely for a few seconds. I've never had problems before update!

  I have not found how to fix 9.3.2,and but I managed to restore my OS to 9.3.1 (which solved the problem of the touch screen) until the next version of iOS comes out which will be hopefully resolve this issue.

  Here are the directions that I followed to roll back my iOS: http://www.gottabemobile.com/2016/05/16/how-to-downgrade-ios-9-3-2-to-ios-9-3-1/

• Satellite NB10t-A touchscreen fails

  Bought the laptop yesterday. First work the touchscreen.

  After an hour or two and a restart, he did not to any of the keys.
  It worked after that, but now it's broken again.

  The touchscreen works or does not work when you start and will continue to do that as long as the pc is on.

  I have not upgraded to 8.1 Windows again and my BIOS is running the most recent version.

  I think you should first determine if a sort of software problem cause the dysfunction of the touch screen.
  I guess that it s not software related issue, but I think that you should make doubly sure.

  First reset the initial configuration. Yu must use the Reset option your PC
  [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

  Check the support of touch screen, and then test the functionality.
  After that, you must move the system Win 8 to 8.1 following the instructions step by step to Toshiba. After this check once more the touchscreen.

  In which case you will still notice some problems touch screen, I recommend you contact the service agents, because this problem could be linked to the dysfunction of the touch screen,

• Gel iphone touchscreen problem

  Hi, after that I've uploaded to ios 9.3.1 I had a problem with my iphone. Intermittently the touchscreen is unresponsive. It freezes, I couldn't do anything if it happens. "Home" button, volume button, ringer and sleep buttons work even though it was freezing. In addition, phone acts weird. For example, when there freezing, trying to save him from this gel, I touch the screen one after the other, after some time touch screen responds, but at the moment, it is as if she stored my order, sliding screen itself, opening an application itself or etc.

  I restored my iphone using computer, I reset, I restart again and again after I made these, but the issue is still ongoing.

  Is there anyone know how I can fix this problem?

  Thank you

  Try to restore again, no backup and see if that helps. If this isn't the case, I suspect a defect in the screen and an Apple Store will test.

• Satellite U920T-10J: microphone and touchscreen does not

  Since 2 weeks my microfone do not work in Skype.
  Also my screen touch doesn't work.

  How pepair?

  With regard to the question of the touchscreen:
  It happens while the screen is pushed up?

  I read on the similar topic in different thread and this problem could be related to lose the connection.

  But first check of workaround:
  1 window + race
  2 .Guy services.msc
  3. go in the human interface device access
  4. right click---> property---> start of type---> automatic (delayed start)

  But if it does not, the issue could be due to a hardware malfunction, and these issues must be fixed by the authorized service provider.

  With regard to the question of the micro internal:
  Please check if the internal mic appears in the control panel - sound - recording device
  Also check if any recording device are turned on. Click to the right and make sure that the two options 'show disabled devices' / 'show hidden devices' have been marked.

  Also check the audio settings in Skype. The internal microphone should be selected as the default microphone.

• Omni touchscreen 10 questions

  I bought a nice enough pen at Amazon, the other day and started trying to use it with the Omni 10. I was hoping that it would help the problems with the screen doesn't react don't not to touch... especially in the upper corners (closing a window in desktop Win 8 mode).

  What I now see (my finger is in the way) is that the keys are saved (I can see the screen mark to the touch), but it does not, or a long delayed, response of the BONE. It would seem that the problem is not with the touch digitizer, but perhaps with the driver/bios.

  To confirm the question I asked several people who have 10 s Omni (not easy to find due to HPs beautiful marketing efforts) to try the same thing and everyone saw the same questions.

  So HP... what a little caring for your early users?

  I just want to give an update: I discussed this for over two months now, with the German support of HP, sending many diagnostic reports and even videos of the screen does not respond. About 5 weeks ago my camera was already picked up. Shortly before it was taken over, I got the info from a support agent that there are known problems with the sensitivity of the touch screen and an updated firmware is for the touchscreen that unfortunately cannot be updated by the user. I would get a new device. A few days after this info that I received another call from the customer service, telling me that they would refund instead replace the unit because they cannot guarantee the issue with a new device. Also on my application if there is a certain serial number range or manufacturing date on the problem is resolved, no one could answer me that.

  Well, believe what you want, but I doubt that there is no hotfix or the update or the new revision of material to address the lack of sensitivity (especially in combination with screen protectors). More likely, it's a limitation of the touchscreen technology Atmel XSense that HP has decided to use this device: I have not met a single comment where someone can use a screen protector with no problems on this tablet or found a stylus, capacitive and had it work on the Omni 10. in any case, the device seems pretty much abandoned me: not a lot of marketing / advertising, poor bed early on, no driver or BIOS updates for the month.

  I would have given the 10 Omni another chance if this problem is solved. But it's the customer more horrible I've ever known in my life of any major brand in electronics: 5th week now without a Tablet and still waiting for the refund to fill so I can finally buy a new Tablet (not HP of course)!

• Pavilion HP14-F1027C: Touchscreen begins to tap the lower left corner on the screen

  Touch screen starts tapping lower left on the screen and would not stop. It starts after 5 minutes. Had to hold the power button to stop it. A ran the microsoft malicious programs. Nothing found.

  Found via MS notes on any issues in registry problems that back suggested in the previous period.

  I ran the recovery back 2 Manager updated to 15/01/2016 sessions. The problem has been resolved.

  Then, I sat with her through all the update processes to ensure that there is no problem update with each of them.

  It's now works fine with no error touchscreen on the uptates later for 15/02/2016.

• HP Pavilion x 360 m3-u001dx: touchscreen scrolling does not not on Pavilion

  Hello!

  Recently (in the last week or so) my touch screen acted upward. Sometimes I can click on things - such as switching between the tabs. But sometimes, when I click it will highlight a word on the screen instead of take me to the link I want.

  In addition to this, I'm completely unable to scroll using my touch screen. I have to use the mouse pad or the keyboard arrows. I am still able to use the mousepad for everything, it is so that the laptop does not work, but it's annoying that I can't use the Tablet mode. I bought this model so that I can use it in mode Tablet and laptop.

  I would really appreciate if someone helped me to solve this problem.

  Hi @Kyllie,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you need help with the touch screen of your computer. I'll be happy to help you with this.

  A remarkable work was done by train to solve the problem. Hats off to you on this point. I am really impressed with your troubleshooting skills and levels of technical expertise, and it's always a privilege to work with a client of enthusiasts like you.

  First, isolate the problem to be hardware or software partners.  Please try a hard reset first. Steps to do:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back.

  Once done a hard reset, we need to run diagnostics on the touch screen to make sure that the hardware is functional. Steps to follow:

  • Hold the power button for at least five seconds to turn off the computer.
  • Turn on the computer and immediately press the F2 key repeatedly, once every second about.
  • The main menu of hardware for the HP (UEFI) PC Diagnostics is displayed.
  • If please run the diagnostics of the touchscreen and component tests and take note of any message or a failure code.

  Link to run diagnostics: http://support.hp.com/in-en/document/c03467259

  Please visit this link for assistance with the touch screen: http://support.hp.com/in-en/document/c03488148

  Please update the bios as http://hp.com/drivers please select country and language, and follow the on-screen instructions.

  I hope this helps! Please let me know how it goes. If it helps, please mark this message as "'Accept as Solution". " If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts help, click the ' Thumbs Up ' to give me aglory. I really hope the issue gets fixed without hassle and the computer works very well for a long time

  Take care and have a wonderful week ahead.