Issue of blue robot with Safari

Similar Questions

• issue of Sierra with safari

  Hi, I have a problem with safari conexion because other browser works well, the same problems with Apple Store. Can you help me, please

  I also have the new software update (sierra) and I think that's the problem.

• Blue square with a question mark instead of a picture

  I'm on Messages to use with your Mac - Apple Support.

  Instead of pictures (or), I get a blue square with a question mark in it.

  This does not happen with all Web sites, but I wonder why it's happening with an Apple site, and how I can see the photos.

  It sounds like a broken image link.

  Post a screenshot if you can, so that we can confirm. The page seems OK after a glance. Command + shift + 4 then do slide on the affected area, add the image to the desktop to this site via the camera icon.

  If you have browser extensions, disable them and repeat the test. Also try a different web browser if possible to see if it is the scale of the system or only Safari. Is - this Safari you use?

• When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  When using YouTube, I get foreign on-screen words. This does not happen with Safari.

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• Problems with Safari since update

  My son updated to OS X El Capitan, last week and since then, I have major issues with Safari. Safari works very well for about 5 minutes and then it stops just respond or takes forever. So annoyed. If anyone knows how help I would appreciate. Is there a way to downgrade to OS X Yosemite?

  If you have a TM backup before you upgraded, you can restore from, if not backup your computer and reinstall Yosemite.

  For Safari, turn off all the extensions you can have and test. You can also boot mode safe and test.

• Cannot download files via yousend it with firefox but with safari - why? (mac)

  I use yousendit to send files regularly and successfully for the past 2 years, always with Firefox. Suddenly, after you attach a file, the screen always says "connecting", but I have never so much as to see a time bar download. YouSendIt support suggested trying the site with safari and it worked - have I clicked on something stupid in firefox without realizing? YouSendIt support had no idea why this would be a problem... I prefer firefox and use it to every other web browsing activity and it is very good - the only problem is with yousendit, something that I need for my work almost every day! Ideas greatly appreciated!

  Hi carriepatsalis,

  You might want to make sure that all of your plugins are up-to-date:

  https://www.Mozilla.org/en-us/pluginCheck/

  I know that some sites depend on flash for their download features. You can also try from Firefox Firefox to solve the issues in Safe Mode. If you do not have the issue so that all your modules, extensions, and themes are disabled, you can try adding them in one by one until you find the culprit. You should look at the guide to troubleshooting Extensions and themes and article troubleshooting issues with plugins like Flash or Java to solve common Firefox problems as well.

  Hope this helps!

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• We get the blue dump with error 0x000000fa error (0xfffffadf3ff7de0, 0xfffff0df26698ea0, 0 x 0000000000000001, 0x0000000000000c10)

  Hello

  We get the blue dump with error 0x000000fa error (0xfffffadf3ff7de0, 0xfffff0df26698ea0, 0 x 0000000000000001, 0x0000000000000c10) on windows server 2003 please suggest solutions for this problem

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)

  How to fix blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  If you are overclocking reset all default before running these tests.
  In other words STOP!

  1 - Memtest.

  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. "http://www.memtest.org/#downiso"] Memtest86 + - Advanced Memory Diagnostic tool

  * Boot from the CD and let it run at least 5 or 6 passes.

  Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

  Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.

  If a well-known stick fails in a slot of motherboard, it's probably the slot.

  http://www.SevenForums.com/tutorials/105647-RAM-test-Memtest86.html

  2. Driver Verifier

  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver. But sometimes it will crash and will not tell you the driver. Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

  I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems. Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

  In Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

  So, here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  Select all drivers that are NOT provided by Microsoft, and then click "Next".
  -On the next page, select "Finish".

  Restart the system and wait as he crashed to blue screen. Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

  If you are unable to Windows because it crashes too early, try safe mode.
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.
  http://www.SevenForums.com/tutorials/101379-Driver-Verifier-enable-disable.html

  Further reading
  "http://support.microsoft.com/kb/244617"] using Driver Verifier to identify issues with Windows drivers for users advanced

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• Blue screen with a log (Windows 7)

  Recently, my computer has been crashing on me in the log on screen, right after the release, sign up, (where she promotes the password entry), a blue screen of death will go to my door, I tried safe mode and the only safe mode can 'survive' through the blue screen, other modes, including networking everything will crash to log in. I tried several solutions, including anti virus scanning and others in safe mode, because the internet is not available for use in safe mode, the only way I could solve the problem is the restoration of the system, which has been closing the door behind the visit of the blue screen. (He solved the problem)

  Even if the issue is resolved, I still have a lot of concern about that, I'm afraid that in the future, this will happen again, maybe.
  So I'm looking for advice or comments, thank you!

  Hello

  Welcome to the Microsoft community where you can find all the answers related to windows.

  Blue screen can be caused by hardware and software issues; because he worked with safe mode then the question could be conflict of third party software or show readers.

  In case if you are facing the same question in the future, I recommend to try the following methods in the following Microsoft article.

  Resolve stop (blue screen) errors in Windows 7: http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Notes:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

  Hope that the information provided is useful.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and then restart windows.

  whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and windows restart.can any1 help me with this problem. my wireless card is qualcomm atheros AR5007 802.11b/g.my windows is windows 7 ultimate.please help with this issue.i m attaching files and dump the error image
  screenshot of error:

  http://sdrv.Ms/Nn8gDA

  memory dump file:
  http://sdrv.Ms/NiXJdJ

  Also, can you provide the latest files minidump since reinstalling the NIC driver.

• my windows laptop 8 is not start blue screen with an error message

  I have a laptop of Acer windows 8 that won't start - it has one blue screen with an error message and other options that work. I do not have a windows 8 dvd or any other device installation and I cannot restart my factory because I have files that are not backed up so they cannot be deleted. Can someone please?

  Thank you for Madi responded and sorry to see that the issue still persists. I appreciate your efforts to try to resolve the problem.

  Since we tried all possible solutions and you do not have a disc of Windows 8. You must contact the manufacturer of the computer. They will be able to participate in the repair of Windows.

  http://us.Acer.com/AC/en/us/content/support

  If you have problems with Windows in the future, get back to us. We will be happy to help you.

• I can't get into communities of Apple with Safari

  Hello

  I'm on Sierra and trying to get into the communities of Apple. I'm going home now with Chrome, I don't like.

  When trying to enter with Safari and got this note from Apple telling me that the site is in maintenance, or almost.

  Why Apple doesn't like Safari on my Mac?

  

  If you have not already done this, go step by step and test.

  1 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  Note: This will remove all the favicons.

  2 remove the Cookies and test them.

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button 'manage Web site data '.

  Delete all cookies.

  3 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button