issue of configuration for the store of data/LUN iSCSI

Similar Questions

• How to check if the device is configured for the HTTP connection data plan?

  Is it possible to check if the device has data during http connection (regular data plan just not bes or bis)?

  I don't want my app to make connections if it leads to an additional burden for the user by the carrier.

  lol but you can provide it as an option to the user, he should know.

• Error creating the store of data on iSCSI LUN (EMC CX4/120)

  I run an error when you try to create a data store on a Clariion CX4/120 system.  Connectivity to the San is performed via iSCSI.  I exhibited with success the target on the storage card and it shows in Configuration > storage adapters > vmhba33 > Details.  It has a capacity of 5.37 to.

  When I go to Configuration > storage and select Add..., I can select the disk/LUN.  The LUN appears here as well.  When I click Next, it fills the device information and location and also reported "the HDD is empty."  After 10 minutes, it generates the following error...

  Call "HostDatastoreSystem.QueryVmfsDatastoreCreateOptions" of object "ha-datastoresystem" on ESXi '172.20.100.78' failed.

  I did some research on Google and looked around here on the website of VMware, and I can't find any references to this error.  Are there log files for the process that I can look into?  I must engage EMC and see if there is a problem with the SAN itself?

  It has a capacity of 5.37 to.

  VMFS data storage limit is 2 TB less than 512 bytes. Try presenting small LUN, then it should work.

  André

• Why the store of data/LUN locked automatically

  Some of the virtual machine are not accessible, and some are very slow, after investigating everything that it's a matter of SAN data store is locked so LUN Reset to cancel the lock to a SAN / LUN

  Problem is resolved after rest LUN.

  Now, I want to know why the locked automatically store data/LUN

  You can check if a host is isolated recently network - HA sometimes continually tries poweron VMs elsewhere and locks prevents it - other causes is a year very busy Bay SAN not finding time CPU to release locks... vmkernel hosts should help... Also look for VC events for the isolation of the host

• Vcenter/VSphere/ESX 5.0.0 question: could not download /opt/vmware/www/build/Tenacity.iso for the san-core8 data store. == > Build fails

  I built this different ways now, and I still get this same exact error. I spin as 'Admin' and I have so any available privilege.

  There are no special characters in the password, I tried this file generation and he got away on my computer than this (v-soft bootable with interface).

  Please help me get to the next step, I'm stuck here.

  Everything seems fine until:

  09/10/2013 18:00:25 [info] validation available disk space...

  09/10/2013 18:00:25 [info] prepares the operating system installation files.

  09/10/2013 18:00:25 [info] looking for /opt/vmware/www/ISV/ISO/CentOS-6.4-x86_64-bin-DVD1.iso

  09/10/2013 18:00:25 [info] Validating md5 checksum for /opt/vmware/www/ISV/ISO/CentOS-6.4-x86_64-bin-DVD1.iso (may take a few minutes)

  09/10/2013 18:01:15 [info] verification of repositories of request for the installation of the packages packet...

  09/10/2013 18:01:16 [info] creating package repositories...

  09/10/2013 18:01:16 [info] create the virtual machine model.

  09/10/2013 18:01:17 [info] VM carrying from the Studio to the host configuration. This may take a few minutes...

  09/10/2013 18:02:20 [warn] cannot download /opt/vmware/www/build/Tenacity.1/Tenacity.1_provstart.iso for the s-core9 data store.

  09/10/2013 18:02:20 [warn]

  %3 %7% 11% 15% 19% 23% 26% 30% 34% 38% 42 failure: (22, ' the requested URL returned error: 401')

  09/10/2013 18:02:20 [error] met a unrecoverable build error!

  I am able to use this model for Centos on my computer actually install and build a paralytic with centos on that - unfortunately I do a

  hacks to make it work properly and I cannot get it to install other real applications (perhaps there is a new version for workstation 10?)

  So I went to vsphere, and I KNOW my generation model is ok, at least to get the installed operating system.

  What information can I give you or what can I try, thanks!

  Is it really "sort of" loading ie 42% or which is a total failure?

  OK, I have a build that WORKED, now I see what you mean about watching build/deploy the VM guest.

  Here is the solution to my problem: our vcenter uses names with spaces, we also use the domain names for our connections. In addition, each admin password was 'special characters', that I've debugged meticulously by ALL of them and much more. Basically, it did not matter that I have "URL" code things, used new tools or edited different scripts to encode things one way or another.

  What finally gave us successes was to go to a 'clean' Vcenter implementation that

  (a) use/did not require a domain name (not / credentials)

  (b) all had the "BACK original' legal names, IE no spaces, no special characters, etc..

  (c) the passwords contained NO "special characters".

  (because I changed this way, 'URL' encoding didn't work, tried it)

  Moral of the story: building a new, simply configured Vcenter or get one and use it.

  (Note: I even downloaded a new ovftool and tried every way that I could but it did not success)

• Configuration for the Exchange Server issue

  I have a question on an Exchange Server, I noticed that one of my Exchange servers has 4 partitions spanning 2 hard drives and a parition of M which is 55GO, but that does not appear in disk management. M partition contains the domain folder, the mailbox databases are on the D: drive. How will I know how much I really voicemails of disk space? And this configuration is supported?

  Chris

  The "M" 'virtual' drive that resides on Exchange (55 additional GB, its representation is not just messages of real exchange located on who will drive you have configured for the mail store).

  Another pattern on this drive "M":

  The default for this reader is the reader of 'm', but if you manually created a "M" drive before installing Exchange will change to another drive available. It is now recommended to 'disable' this disc.

  Run the "Best Practices Analyzer Tool" on the Exchange Server and it will find any question you should change. To turn off virtual drive is one he'll find and indicate what registry entry to change:

  http://www.Microsoft.com/technet/prodtechnol/exchange/downloads/2003/analyzers/default.mspx

• The current block size for a store of data in VMFS3 is 4 MB. Must upgrade thedatastore to VMFS5 and wants to change the block size of 1 MB

  The current block size for a store of data in VMFS3 is 4 MB. Must upgrade thedatastore to VMFS5 and wants to change the block size of 1 MB

  help me on this

  Create a new data store VMFS5 with a block size of 1 MB. Migrate all virtual machines store data to the new data store, and then delete the VMFS3 data store.

• PowerCLI - there cmdlets to browse the store of data for files/directories and their creation?

  Hello

  PowerCLI - there cmdlets to browse the store of data for files/directories and their creation?

  If Yes, can you please let me know.

  I took a glance at the reference of the cmdlet, but can not find...

  
  Kind regards

  Dreamer

  You can use the data store provider.

  It is documented in the vSphere PowerCLI Administration Guide that was installed with PowerCLI.

• Find the store of data with more free space.

  So I'm trying to build a script to configure the virtual machine.

  I'll have it retrieve the node to keep newly available vm out based on the cluster, I said to use. I'm just using the Random function to do that then I select a node in the cluster.

  Where I have questions, how can I

  find the data store less used, based on a particular data store naming scheme.

  I want to say is:

  Hypathetically, I for example named data warehouses:

  store data-prod-01 200 GB free

  store data-prod-02 500 GB free

  free data-prod-03 10 GB store

  free data-qa-01 200 GB store

  free data-qa-02 1000 GB store

  I want to throw in a piece of code to tell him to watch data warehouses "datastore-prod *" and place the virtual machine on the store of data with the most space. (that's assuming that the vm will agree on the DS and let fresh generals)

  I guess I want to know if it is possible?

  I would also be concerned about scenario that perhaps the vm should I build just will not match on any of my other data store. I guess I need a logic to check if it is still possible.

  This is more than a wish rather than a necessity. I'm thinking if I just read the info, or use a cvs file after running the script. Any recommendations would be greatly appreacted.

  Hello, drivera01-

  You should be able to do this with a very small amount of code.  Download all data warehouses that correspond to the model name, sort free space (in descending order) and select the top one.  As:

  ## get the datastore matching datastore-prod* that has the most freespace$oDatastoreWithMostFree = Get-Datastore datastore-prod* | Sort-Object -Property FreespaceGB -Descending:$true | Select-Object -First 1
  
  ## if the freespace plus a bit of buffer space is greater than the size needed for the new VMif (($oDatastoreWithMostFree.FreespaceGB + 20) -gt $intNewVMDiskSize) {<# do the provisioning to this datastore #>}else {"oh, no -- not enough freespace on datastore '$($oDatastoreWithMostFree.Name)' to provision new VM"}
  

  The second part, where it checks for sufficient freespace on the data store that has the most free, can be updated to behave as you need, but that should be the basis.  How does this look?

• Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

  Hello

  I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

  No writable calendars are configured for the invitations with the provider for Google Calendar.

  My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

  I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

  What can I do? Is there a solution for this?

  Thank you!
  Daniel

  Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
  In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
  You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
  Or you may want to try CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• Invalid configuration for the device 3

  Hi all

  I have set up a lab nested with three hosts esxi and two warehouses of data connected with the Microsoft iscsi target server. I know nested vm is not supported, but I'm trying to implement this workshop because I support a real VMware environment and I wish I could test some things before I break anything, so it's important. I get this error when you try to create a virtual machine "invalid configuration for the device 3.  Someone knows how can I know where is the problem?

  Thank you

  I think I can find the answer, it seems that it could be a windows problem causing data corruption. Somehow I created a VM but get all kinds of error trying to create an another VM.  Iscsi targets set up using windows server 2012 and it seems that there is a fix from Microsoft below which deals with corruption LUNs in windows 2012.  I have not yet tested, but this seems to be the right direction. http://support.Microsoft.com/kb/2908783

• Space in the store of data not released when a virtual machine is removed

  Hey all,.

  I have a game fairly simple up - two servers ESXi 2 Terminal servers. I'll have a problem, but with space in the store of data not be released on one of them after that I got a clone to the virtual machine, made my changes and removed the original. I can find no record anywhere, using vSphere (not in the inventory or when I browse the data store), but the HARD drive space using the server is still assigned somewhere.

  Any body have tips on where to find or how to fix this if it is indeed a problem?

  Any help is greatly appreciated.

  Thank you.

  How bout refreshing your data store? tab Configuration-> storage-> refresh?

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• How will I know if I am being charged for the use of data on the mini2 ipad

  How will I know if I am to be charged or billed for usage on my ipad mini data 2?

  Hello

  You can be charged for the use of data on an ipad, if it has a SIM card

  Cellular data.

  If your home wifi is unlimited you will not be charged more.

  Unless your WiFi has a hat of data ie download limit.

  See you soon

  Brian

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• Restarting a task for the acquisition of data inside a For loop

  Hello

  I need iterate through my acquisition of data. Currently, I'm doing this through the creation, implementation and tasks for the acquisition of data inside a loop For which is iterated according to the needs of compensation. Unfortunately, the creation of these DAQ tasks slow down my code.

  I would like to be able to create the tasks outside the loop, pass them in and revive the tasks at the beginning of each iteration. Is there an easy way to do this?

  Otherwise, is there a way to make the standard DAQmx digital startup trigger trigger several times (so that it starts each pulse data acquisition in a long pulse rather than just the first pulse train)?

  Thank you!

  -Evan

  I whent before and created this example for you (and many others.)