Issue of documentation on the particulate IMAQ 3 filter
Hello
Sorry if this is immediately obvious, but:
IMAQ particle filter 3 documentation, it is said: "Type of precise measurement that the measure be in pixels not calibrated or calibrated to actual values." It's a Boolean input value, but it is not clear to me who is associated with "true", and which is associated with "false".
Any help is appreciated,
Candice
Candice-
In this case, "true" means calibrated values real, and 'false' means pixels not calibrated. I have tabled a CAR to make it more clear in a future version. Thank you!
Greg Stoll
Vision R & D
National Instruments
Tags: NI Hardware
Similar Questions
-
Documentation of the API for CWIMAQControls
I am a software developer with several years of experience in medicine and other sciences, but now is working on a software project using National Instruments IMAQ customer in .NET and have no prior experience with image processing. The only I can find the API documentation is a help file with the product intalled. Then this under did a good job explaining the service inputs and outputs, it is light on the explanation in a real retail functions actually do. Under .NET (not my favorite but this is what I got), I can get a good summary of the objects and their properties / methods, which is useful. I see there are a lot of good material in this forum, but what I need right now is good basic documentation. I also noted a plethora of PDF files in the directory of installation but found nothing there or on ni.com which gives me the level detail fo I need. When I think that the documentation of the API, I expect something as complete what Sun Microsystems offers with any JDK Java - it seems that the doc API IMAQ assumes a certain level of ease and does not for someone like me come with literally no background outside a lot of math (algebra of vector fortunately!) and science in College courses.
Am I missing something? I see that there are many examples of programs and I can get what want from those, I guess, but I do not charge my client for all the time it will take, if there is a more ready fo source information.
Now, I realize that the field of the treatment of the image is large and it would be difficult to develop a software of this nature without a learning curve. So I have
I studied through two web queries image processing and having bought the book 'Digital Image Processing (Gonzalez, wood).
Specifically, I was put to zero in on what is needed for the task at hand: "blob detection" and "blob tracking movement." It seems pretty clear to me, some have become familiar with the image processing basic terminology and methodologies that have been developed for tracking, and image recognition of movement IMAQ software can do what it takes. At this point, I can do basic things with objects presented in .NET. It is analogous to maybe ask a kid who just the definition of an equilateral triangle to solve differential equations.
In this case, what I really need is one or more examples of programs that perform functions similar to what I want to do. Is there any suggestions in this regard? My research on ni.com revealed evidence of the items of "blob detection" and "blob motion" and I see that these were used for tasks as complex as the particles of follow-up and the counting of blood components. I don't see and od you expect not to see any object, follow also specific methods than what I need to do - which is in fact quite abstract - and chart the path of the blob more to light to the camera image gained when it moves in real time.
It's a strange feeling to have been programming for decades, and then enter a field where the customer needs require me to act as a nini who has not done its homework. But it's the nature of the job. The pointers will be appreciated. If I missed something obvious I don't even mind being reprimanded to be unobservant or lazy.
Thank you very much in advance for any assistance that may be provided.
tsfarrell-
Have you looked at the manual of the Vision Concept? (it should be in the form of PDF in the documentation directory, or you can see it here) It has a more detailed description on what our algorithms.
We also ship many examples for .NET - those of the 2. Functions\Binary analysis file dealing with blob detection and may be useful.
Good luck to you on your application!
Greg Stoll
Vision R & D
National Instruments
-
I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please
Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor. Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.
-
I'm looking for documentation on the Firefox command line arguments.
I'm looking for documentation on the Firefox command line arguments. I use Ubuntu.
http://KB.mozillazine.org/Command_line_arguments
This doesn't seem to be what you're looking for?
-
Highlight the option IMAQ Oval overlay
Hello fellow programmers.
I was wondering if someone could explain the following: why are there no draw option 'flagship' in IMAQ oval overlay, even if the overlay IMAQ rectangle has this option?
No simple alternative workaround solution? I am move 3D and tries to display the color gradient based on these movements on a picture 2D for clarity. I could I think using a rectangle, but the shape of the ellipse suits me better...
Thank you and best regards,
K
-
We just installed Labview 2009 and the copy IMAQ function is missing. We have had a request from 8.6 to use it and now it seems to have disappeared. What happened, or what can be used instead?
Thank you
Bob
You must install the Vision Development Module, and IMAQ copy will come back.
Andrey.
-
How to pass the session IMAQ to the Subvi
Hello
My experience with LabView is neither very good nor extended. I am a scientist and I'm with IMAQ data acquisition. My current problem is that the people who wrote the script is modular, versatile, or clear initially structured. So I try to reduce the ridiculous number of tests in a simple flowchart to a level that people can actually understand it... and to make the more versatile script for future experiments.
I'm introducing quite a few subVIs to be executed repeatedly. However, I can't know how to pass the IMAQ session on the Subvi. I constantly get the error messages. In this case, I want to acquire images with OIDE_CollectFrame.vi controlled by OIDE_TrialPhaseCollect.vi. I couldn't understand how to assign the refnum IMAQ session class, either.
It is probably a newbie question, but usually I program with LabView.
Dennis
-
Function documentation for the SignalExpress project
I use the function 'project documentation' LabView SignalExpress 2009 in my application project.
The draft measure a pressure signal permanently in different situations. I want to present my project document is a list of locations of the siganl of pressure taken under different situation, with a plot for each situation so that readers can easily compare the plots.
For example, I want the document states:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
At 10:00 at low flow:
ground pressure siganl
At 11:00 with increased flow
the same pressure signal ground
etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
What I did was flirting with the pressure signal in my documentation of the data acquisition phase in the project tree, but in doing so, I could only show the last parcel of this signal in my documentation, the plot is in real time, just like what shows in the display of the data.
Is there a way to show the same siganl taken at different times in a documentation?
Thank you!
Hello
You can totally do this by using a feature called "instant."
Rather than drag the step signal directly in your project document, first create a snapshot of your data using the menu option "use > create snapshot...". (Ctrl + Shift + T) »
A dialogue will appear asking you what signals you want to instant. After selecting / them and clicked on Ok, your new snapshots will appear in the section overview of the application (in the left corner below, by default).
Drag these signals on your project document. When you are ready to create your next snapshots after changing the configuration, you can select "Operate > repeat the last Snapshot (Ctrl + T) ' to simplify your process.
For more information about the snapshot, see using LabVIEW SignalExpress found under "Help > LabVIEW SignalExpress Help" and search on the keyword "snapshots."
I hope this helps!
Phil
-
E/s and the issue of Communication for the sbRIO-9601
Hello
Our company is looking to use the sbRIO-9601 in an OEM application and I had two technical questions on the Board of Directors.
(1) are the functions VISA support? I saw there an RS232 port, I want to just make sure I can read/write easily out of it using prebuilt VI rather than do all the level low and starting from scratch.
(2) we will be reading and writing of simple commands to a device coupled via the RS232 interface and based on the response, illuminating an LED controlled by the Board of Directors. I have not selected any led and hoped that neither could provide some clarification on the limits of the power provided in the sbRIO-9601 user guide. We will use the 3.3V output... I should put a resistor in line current limiting or I can put the diode directly between the output pin and the digital ground? Us can drive more than 15 LEDs, however, we will never more than 3 see on at any given time. I saw in the 3.3V section i/o of the documentation that the current max tested per channel is 3mA... but bus total is 330mA. Is there a limit to how much we can provide each channel as long as we remain under the 330mA all together?
Thank you
Hi leachdor,
(1) VISA functions are supported for the RS232 port on the sbRIO, so do not do any level low programming for them.
(2) the maximum that we specify channel 3 is my. You can combine several channels in parallel to increase this output up to 330 mA for the total bus. Since you're only driving 15 LEDs and there are 110 channels of output, you should be able to combine some led.
-
Unable to get the write IMAQ 2 file to ask the user for the path.
I am currently using an IMAQ 2 writing file to create a .bmp image. I have the VI attached to a control which allows the user to enter the path where they want to save the file. However, I do not want the user to have to ensure that they have typed the path forward the write IMAQ file runs. I want the program to work so that when the write IMAQ file running a window is displayed asking the user where they would like to save the file. If someone could help me out I would be grateful thanks.
Use the file i/o VI file dialog box > range of advanced features to file
-
Is there a documentation about the configuration of the function keys (program)
Is there a documentation about the configuration of the function keys (program).
Dell Dimension 1400, model XP SK8110 keyboard. Yes, I know there are 7 years old, but running like a champ.
Hello
You can use various function keys to activate certain features and commands only. The following list details the current functions keys, what they do, and when you can use them.
Three keys can be used when Setup is loading and when you are prompted to press the F6 function key to install some third-party small computer system interface () SCSI and host controller drivers:
- F5 - for computer type or hardware abstraction layer (HAL) selection
- F6 - to install the SCSI controller drivers and third-party host
- F7 - to run Setup without Advanced Configuration and Power Interface (ACPI)
When the "Welcome" screen is displayed, the following function keys can be used:
- F2 - to automatically start the process (ASR, Automated System Recovery).
- F10 - to bypass the menu screens and to load the Recovery Console
During the GUI (GUI) - Mode Setup, the following function keys can be used:
- SHIFT + F10 - to enable access to a prompt during the installation in graphical Mode
- SHIFT + F11 - to display "old" wizards that give more detail.
Thus, it is not possible to configure the function keys to perform this task. However, you can use your favorite search engine to perform this task.
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
I am not able to connect to the windows xp system after Windows update. the following error message come on the logon screen after entering the user name and password.
"The program issued a command but the command length is incorrect.
I'm now trying the solution.
try to run in the final... known good configuration does not
trying to boot into safe mode... does not...
does not work any other way...
... recovery console not able to connect
repair system does not...
..
only the format option left on my side...
someone help me...
Hi HarishLodhi,
1. what happens when you try to connect to the Recovery Console?
2 of repair of system are. which option you referring?
You can try to connect to the Recovery Console by following this link. Subsequently, follow the steps in the link & check if the problem persists:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, check the number of the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.
How to recover from a corrupted registry that prevents Windows XP startup?
Hope the helps of information.
-
I ask because I open/asked my first question "Desktop and personalization", for lack of a better forum. "Troubleshooting the system" or "System inquiry" would better describe the nature of my question, but none exist.
I received no answer, can you suggest a better forum of the 14 listed? And if yes how can I move it to another forum?
Here is a list of the 14 WinXp forums.
Windows XP Forums (14)
Desktop and personalization
Hardware and drivers
Performance and maintenance
Install, upgrade, and activate
Programs
Music and sound
Security, privacy, and user accounts
Networking, e-mail, and getting online
Files, records & research
System repair and recovery
Internet Explorer
Windows Update
GameI opened another in the right Forum, answers to Microsoft Site Feedback.
title "issues are transferred to the forum (opening) original to a more appropriate forum?" I thought I read that while I asked my first question? REPEAT - in some sort the first attempt ended up 'Desktop and personalization' ',
who has responded.
-
HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001
HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001
Hello caromuna,
It seems that other users have found a way to completely reset the printer back to the default settings, which can help with this question.
The reset is discussed in this forum thread and seems to be a bit difficult to fill. Let me know if it helps to solve your problem.
-
Microsoft has never issued an update for the Win7 disk defragment utility?
Microsoft has never issued an update for the Win7 disk defragment utility? Thank you.
Original title: Win7 updates
To my knowledge, the Defragmenter from Windows 7 has not been maintained since the liberation. You have a problem with it?
Maybe you are looking for
-
When I try to download Firefox
When I try to download Firefox to my laptop Win 8.1 I get the configuration of Fire Fox page and green bars rolling on the words "Download Firefox" but after an hour the bars are always rolling, but there is no download. Fire Fox has run on the lapto
-
Small screenshot here so you guys see this with me better: I accidentally deleted the "Bing" favorite coming in safari by default. I would like to know if resetting default Safari would bring him back and if so, please tell me how to do this. Thanks
-
MAPI error during export from Windows Mail
I'm trying to export mail from Outlook Express to Outlook 2007. After the success of export from Outlook Express in Windows Mail, I was unable to export to Outlook. After choosing Microsoft Exchange as my format this message: export cannot be perfo
-
I reinstalled windows vista Home premium 64 bit on my lap top and I get now the error message 0xC004D401, "the security processor reported a system file mismatch error" I tried going on the windows site to validate the software but nothing happens
-
Lost my certificate of Authenticity sticker
Hi Ive recently reported that my certificate of Authenticity sticker is missing, I don't remember weather, as I peeled off by mistake. I always have my laptop recite and everything would be so that I could replace? Thank you