Issue of glass

Similar Questions

• Greenscreen Setup ok - any tipps?

  Hey there,

  then I looked at a few tutorials ultra key. Best results I had with chossing a very dark green screen overlay spot, choosing the aggressive installation and reduce the highlights. However, I have this problem that on the rift oculus glasses, there is green spill because these things are very bright. If the glasses are clavetés in part at any time. Reduce spills does nothing for some reason any. Another way to do that better?

  Here is a picture of my setup, maybe you can give me advice how to improve it. It is perhaps not quite uniform? It is a cache of green color specifically for this. Thank you.

  

  You don't have a lot of tinted light spill everywhere and probably not enough light to blur the edges back!

  She looks like she's very close to the BG! (hard to tell)

  The light on the screen is fine and should shoot well.

  You must change your FX key settings and you can try adding a second masking effect

  You can try the settings of pedestal that I find that the default value is always undefined.

  You can also try - duplicate your item above the other and add a mask around the areas at issue in glasses

• WiFi connection falls back only when the Satellite L650 is sitting on the glass desk

  Since I bought a new Ikea glass desk, free wifi on my laptop Toshiba has been stalling. It took me a while to put the two together.

  Whenever I'm sitting there on the desk, wifi is de-energized, but as soon as I took it off the table, wifi will reconnect immediately and it works normally.

  I used it on a covered with _wooden in the same region and it works completely fine and never gave up.

  I recently bought a Toshiba wireless mouse which said seller works on any surface. Well, it doesn't work on my glass desk and I had to buy a mousepad for that and now it works...

  I'm using Windows 7 Home Edition premium on a Toshiba Satellite L650 laptop computer model No.: PSK1JA - 0K 3017.

  Please help me solve this problem! What can I do to stop falling out wifi while it sits on the glass desk? All responses are much appreciated thanks!

  Hi Chan

  I m very surprised after reading your interesting ad. To be honest, I use Toshiba laptops for a long time now and I ve never used on glass desk so I don't have any experience with this issue and I also think that you are the first person that relates to this topic.

  It's a really new and very interesting information. I m really interested on this thread and I would like to hear more of other people who use the glass desk.
  What to do about it? Simple question, but I fear none of us can give you good advice on this topic m.

  OK it's a nothing with your question, but if you use it on the desktop you can use the connection to the LAN? I mean that if you may have a kind of Home Office you must connect using the connection to the local network. I do though that the WLAN router is active.

• Apple TV remote control glass broke when dropped

  Recently, my husband bought our second Apple TV, an upgrade of the first edition, we have purchased four years ago. We are customers of long-time Apple and have always possessed several Apple products. We both like the updates to the new Apple TV with the exception of the remote control. There are a few things we don't like about the design. First, our remote fell of the couch on a ceramic tile floor and broken glass. Accidents happen, and I dare say that it is going to be a lot of unhappy customers when they abandon their distance and it crashes. I will say that if the remote was dropped on the carpet he probably have come out unscathed. The remote control fell to the back of the sofa at a height of about three feet. I think that the remote control must be able to survive a fall like that or maybe Apple could consider designing a case or neoprene as the channel to the remote control. The other complaints we have are things that we have learned to adapt to. Remote ginning glass is well issue and because Apple products are on the pricey side (I had to replace a laptop charge cord twice - $80 a pop - compliments of our puppy) we have not yet checked the cost of replacement.

  Yes. It is a delicate user in my opinion not the real world tested. There are other posts on the topic, and I saw the new cases that occurred just as we have for our other handheld devices.  I think Siri remotes are also about $80...

  I will also mention that the old Apple TV remotes work with the new ATV as well - except Siri.  In fact, I use remote money or my universal remote control harmony more than the included remote control of Siri (I can't find Siri on tvOS it useful - still).

• The dust under the glass

  Hello world!

  the has found several pieces of dust under my glass of ion - x in the lower left corner. Nobody knows: our limited warranty covers this issue? someone face thing? It's ok, or his problem with adhensive, which keeps the front glass?

  

  Hello

  If you can see the dust under the glass of the watch face, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch repaired under warranty:

  https://www.Apple.com/support/watch/contact/

• HP Photosmart 5520 All in One printer cancels an order of copy of the glass

  HP Photosmart 5520 All in One printer & HP Pavilion dm1 Notebook PC

  I put a document on the glass of the printer to make a copy. The command is recognized, but cancelled immediately. The first two attempts were given a bit of text/photo about 1 centimeter.

  I used the doctor scanning HP and installed my printer again, but that has not helped.

  RodeDraak

  Hi RodeDraak,

  Given that the problem occurs when you run a copy, I hope that the problem is the printer hardware not the software on the computer.

  You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.

  Issues when connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see,

  QUESTION:

  Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

• Air bubbles or a bit under the glass screen?

  Recently bought a new iphone more than 6 s, not even a week old and noticed a little air bubbles or a little under the glass display on the white area of the phone, don't know how product, help someone

  Try to reset the phone - hold the power off button and home buttons together until you see Apple logo and then allow normal startup - without loss of data

  If this does not solve the problem with the screen then it is probably a hardware issue and you can bring your phone to an Apple or an authorized store

  (1183)

• Satellite A200 overheating issues

  I got my A200 2.2 GHz Core 2 Duo, 2 x 160 GB in Raid 0, 512 MB ATI Mobility HD2600, 2 GB DDR2 667 around the Christmas period in 2007, since I bought it I had a major problem that has never been corrected under my warranty. Laptop overheating, overheating all playing games, when copying large files or after a few hours of heavy use. I had the graphics card and card mother, or even replaced the cpu, graphics card twice. now I'm no longer under warranty, and the problem starts again. I can't run without it going down.

  My options: take it back to harvey norman and try to get them to fix it again
  Call toshiba and get them to maintenance for me (they're going to clean the dust out of her charge me two hundred and it will start to play a month later)
  by the post here and hope that some toshiba tech can explain a possible bios fan problem, or how to clean myself.

  If I don't get help, I think I'll try to get the laptop all replaced by toshiba - see if they'd pay the difference, because they sold me a product defective, reports on this issue are very common online without a solution - they want your using the wrong or something but im drivers everything works the out of the box and it has the same problem.

  Ive tried everything, keeping the computer about 6 inches on the desktop but the internal component always on a fire of disks formatted. A friend of mine has a similar problem with another company and they replaced the laptop everything and updated. I hope toshiba can offer me something similar though I am no longer under warranty. However, the components I had replaced 6 months ago problably are still.

  so if anyone has a solution or if toshiba could get it please contact me it would be much appreciated.

  Hello

  Disassembly manuals are not available on the pages of Toshiba. I guess that they are not for public use. If you need instructions on how then you glasses a bit.
  Maybe you could be successful.

  One of my friends has one of the portable Sat A200 and it works without problems.
  It has installed Win XP.
  I remember that after installing Win XP, you will need to update the BIOS to the version of Win XP. There are two different versions of BIOS. XP and Vista.

  My laptop (Toshiba not a) overheated in the past because of the clogged vents. Circulate fresh air could not t and the internal temperature has arisen at a critical level. I cleaned the vents of the dust and debris with the can of compressed air.
  This helped a little.

  But after some time the problem happened again the next local laptop technician, I visited and he disassembled the laptop in order to renew the layer of fat that was placed between the CPU and the cooling fans.
  He said that this is necessary if the heat created by the CPU would not drain properly.

  After that, my laptop is ok.
  Of course I have enough free space around the laptop because it is very important to the circulation air properly!

• Break glass a very easy Apple TV remote control

  We bought a new apple tv 4. Now after 2 days because the remote is so happy, he eludes easy hands.

  No problem with any remote without glas.

  Apple use a glass so thin and weak that it will break after a decline of only 1 meter high on the floor. This glass is so strong, that our employee cut his hand.

  We ask this through the present apple to change the design of this remote, so it is safe to use.

  When we look at the remote control, it can be folded very easy.

  It is a factory engineer bloop.

  It is not necessary to go into an endless debate.
  Yes, this remote is very slippery

  Yes, this glass cut in a hand of people picking up the Earth.

  No we couldn't use the loop because different people would use this RC.

  No, it a cover arranty so that it is not available.

  No, we didn't have 2 left hands.

  This info is to protect other people and hope that apple will change this issue of quality.

  (the red stripe is to protect the glass and the people)

  No, it a cover arranty so that it is not available.

  Yes it is.

• deployment issues

  Hi all

  I'm new to Teststand and tried to deploy my Teststand applicatino on computer target for the last 2 days and have some questions about the deployment process.

  1. I developed my TestStand application on the D drive on my development computer. My computer has only the C drive. In this case, (note: TestExec.ini is also being rolled out) I would still need to:

  (a) change target the path search on the computer configuration after deployment, for example, adding/changing of all relevant paths in the configuration of the research to start with drive c. or

  (b) I can also do a few tricks, by setting configuration C: research in computer development, just for the sake of deployment. In this way, the deployment on the target computer will be the right search path (and the files output because directory report I specify a directory output fix reports). Then I have to change the configuration of the search on drive D for the continuation of the focus on the computer of deveopment.

  The question is: if I choose one) as deployment strategy, in order to add/change the configuration of the computer search target, I need a teststand development license. If I download a teststand development (evaluation) on the target computer, after the add/change the configuration of the search on the target computer, I disable the Teststand development and move the license to the license of deployment on the computer base target, this will do, right?

  2. shared variable deployment published network is not so straightforward. My target computer will communicate with a compactRIO with shared variables. The compactRIO controller is AES. I added a "deploy Labview Utility LIbrary step" in a sequence step and deploy this sequence on the target computer. I ran this sequence in order to deploy the variable shared on the target computer. However, I got an error saying that the shared variable library can not be deployed and to ensure that it has only shared variables in the library. I checked and you can see that there are only shared in the lilbrary variables. What could be the possible reasons? Can someone give me advice on this problem? Y at - it a tool that can scan the library and tell me if there is a 'hidden' in this library vi because I see nothing wrong with the library even with my big glasses.

  I think other shared, for example variable deployment options: a) maybe I need to download a system assessment deveopment LabView on the target and the copy on the Labview project and deploy the variable shared across the labview project. or (b) I can create a vi that uses the variable shared and using labview generation process for deploying the vi as exe. Check the option "deploy the shared variable" appropriate in the build process, run the exe on the target computer. This way I can deploy the shared variable. After deployment, disable the deveopment LabView evaluation license so there is only LVRTE on the target computer.

  (Not the one above) and b) sensible options such as shared variable deployment strategies?

  At this point, I realize that the TestStand deployment is a skill. There is no systematic deployment for TestStand approach. The experts out there agree? I just need a few entries so that I'm not on the wrong track. Thanks in advance for your comments.

  Yours,

  chati

  Hello chati,.

  version of the software you use?

  There is a known issue with the variables related to a shared library in old versions of LabVIEW.

• ScanJet Enterprise 7500 cut words when scanning magazine or glass

  When documents need sanned .pdf of the tray of the charger or the glass, there are 2 lines that run down the whole page where the scanner omits letters and truncates the words.  All documents are 8.5 "x 11".  The computer is running XP.  It is a new issue that has developed over the last week.

  Any suggestions?

  Thank you?

  What I see in the paper that you have downloaded, placement on the glass is biased and this is what causes the black negative space appears. I recommend you get the DPI of the und of scanning using the ADF on the top of the machine. Adjust the paper guides to fit comfortably against the paper.

  Fix analysis resulting to let me see.

  I hope you're havingt a great day!

• HP Officeject 4500: Analysis of issues on the Officeject HP 4500

  Hi all

  I had recent trouble with the HP Officeject 4500 (Wired). I have had it for quite a few years and have been happy with it. It prints the fines and scanned/copied fine as well. Unfortunately, my scanner has had some problems. It seems that the scanning light is stuck on the right side of the printer. The first time it has produced, I been in the printer and moved it side just a bit and that seemed to have the little guy on the rails. Unfortunately, this issue has increased, and my previous solution seems to not work. I moved to the back of the lamp a little and allowed the printer to remember and send the lamp back, however, the lamp comes back to the right side, it gets stuck again. I tried to fix two times tonight and two attempts ended in failure.

  Someone at - it an entry on what can help me?

  Edit:

  I also understand that I contact before HP about this problem and I'm not kidding when I say that they had completely no idea of what was going on at all. They told me that I would need to bring repair and asked me if it was under warranty. They did not even address my question or are trying to help. When I invited my question more thoroughly, they said 'I'm sorry Sir, I can't help you,' and hung up. So the point of my writing, all this is I would appreciate comments from any HP customer, Beceause my faith in the HP support has been sprayed.

  I solved the problem. Yet once, I entered the printer and adjust the positioning of the lamp which the printer recgonized its location and was able to remember the lamp with success.

  Thanks for your help X-23, I will no longer need advice on your part.

  I turn now to the customers of HP and the HP Officejet 4500 owners:

  As you can see, X - 23 was not able to help me. I am grateful for his time and fast delivery of his answers, but he could not fix my problem. If you have read earlier, you can see that X-23 has sent me a PM. In this monograph, it includes a bit on the function on the HP Officejet 4500 wireless even if I mentioned to him that I own the model this is not the wireless feature. He doesn't have to remember. I encourage all HP customers to use your common sense and see if you can logically solve your problem. If this is not the case, do a quick search on Google. The only advice I can give you is to not accept responses from HP that go like "I'm sorry Sir, but your printer, you need to replace/repair/return. In my years as an HP customer, I never found the need to communicate with them on any problem I had, because I could figure it out myself. And I knew that HP customer care is more distraught than any of their customers. I came to the conclusion that HP creates products designed to break after their period officers and hiring of guarantee that copy and paste solutions for them in a manual of customer support.

  With respect to the correction for the Officejet 4500, find the steps below:

  (1) find a screwdriver that supports Allen key sizes. You will need an Allen head moderately small key.

  (2) unscrew the screws located on the printer in these places: 4 on top near the scanner, 2 by the hinges of the scanner cover and 1 when you open the cartridge access door.

  (3) with all these screws removed, lift the printer gently pulling him in the back, then the front.

  (4) open the printer so you can see the glass of the scanner and prop them open so that you can fit your hand inside.

  5) gently move the lamp to scan out of his position. You will need to move it a little if the printer is to remind successfully. The printer is programmed to move back some distance to ensure that it works, if place you it too close to where he was trapped, it will get stuck again.

  Follow these steps, and I hope you get an all-in-one printer to work again. If this isn't the case, then see if you can find a replacement through your warranty. If your warranty has run out, find another brand of printer that has good printers for cheaper price and ink at price and normal price (unlike HP). I wish you good luck.

• Xperia z3 D6603 concern of the disparities between the glass and the frame.

  Hello

  Recently, I upgraded my ion in z3. And there is no doubt that it is an amazing phone.

  But I have a few concerns about the interstices between the glass wall and metal frame. He crosses dust and more that I am concerned about its tightness. I want to know is - it normal that all the z3 out there or is it just me? What happens if we can't manage water in this regard?

  There are a few pictures.

  

  

  

  This subject has been mentioned repeatedly, the z throughout the models up to the Z3... you must have a uniform space between panels & the bezel... This must allow a form of expansion due to temperature changes, if you think about it... If, it was packed tight, & the phone heating expansion would have nowhere to go which causes damage. Gaps don't want you have a raincoat issue is...

  Hope this helps

• Copy/scan Dell AIO 926 Printer Issue

  25/03/2013

  My 5 year old AIO 926 prints of email, Word, excel, etc..  And it is used to copy a page on the glass without problem.

  For the last 5-6 months where using the copy of the format, it tilts a vertical column starting 5 inches from the left margin to 6 inches, how it start printing correctly on the right margin.  This is consistent from top to bottom, as something covered that part of the page on the glass.

  I uninstalled the printer 2 times, downloaded the driver of many times and reset the command offset printer as well, but nothing doesn't solve this problem.  The printer works fine for files sent by the PC, I suppose that it is not a problem with cartridges.  I'm not a PC guru and utilization of my setup only for fairly mundane personal stuff, so probably miss me something complicated (for me) that I could try.  Can I get help in simple language for someone at the level of expertise "of the PC for Dummies"?   Thank you.   Email responses would be appreciated: ADMIN NOTE: identification of Email deleted by privacy policy >

  Hi Rick Carbonneau,

  As we tried all the steps above, it seems to be a hardware failure. Based on my experience of the belt scan starting jams by causing this issue a bit.

  You can consider replacing the printer.

  Do not respond if you have any other questions.

• How can I change my magnifying glass

  How can I change my magnifying glass

  Original title: * e-mail address is removed from the privacy *.

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution about the Magnifier.

  1. you try to change the zoom level to magnify?

  2. what exactly is the problem you are having?

  Make items on the screen (magnifying glass)
  http://Windows.Microsoft.com/en-us/Windows7/make-items-on-the-screen-appear-bigger-Magnifier

  See also:

  Change logon for accessibility settings
  http://Windows.Microsoft.com/en-us/Windows7/change-ease-of-access-logon-settings

  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »
  See this link for more information on:

  http://support.Microsoft.com/kb/555375

  Provide more information about the issue so that we can help you.