Issue of multiple Disqualification tasks that use the same snapshot

Similar Questions

• Two tasks that share the same resource in sequence

  I'm the current exception "the specified resource is reserved.". I understand that you can not run two tasks that share the same resource at the same time. However, is it true that you can not run two tasks that share the same resource, one right after the other, without the eliminate completely from the first task?

  for example

  Task1 and task2 share the same resource
  
  Task1. Start();
  
  Task1. Stop();
  
  Task2. Start(); This will always throw an exception until you have a task1 (i.e. task1.) Dispose()?
  
  Task2. Stop();

  Hi cafarm,

  You're right, the fact to just stop at one task does not allow that run you another task with the same resources immediately after. That being said, you can start the next task without having to erase or dispose of the first by making use of the task status template DAQmx. As you can see on the next page, stop a task simply going to the State of "Clerks", which means that the material is still used by the task even if she does not actively.

  http://zone.NI.com/reference/en-XX/help/370466AC-01/mxcncpts/taskstatemodel/

  Instead, you can use the control functionality of task for the first task of transition to the status "verified" after stopping it, then start the second task. This keeps the parameters of the task without having to have the task, but it should free up resources to be used by other tasks.
  http://zone.NI.com/reference/en-XX/help/370473H-01/mstudiowebhelp/HTML/verifycommitstartstopdaqtask/

• Can I delete my old Firefox sync account if I have a new one that uses the same email address?

  Hello

  I took off all my devices a synchronization of the old account and set up a new synchronization. In this process, I used the same as before email address.
  I have no use of my old account of synchronization, so the question is:
  Can I remove the old account from synchronization (via https://account.services.mozilla.com/ ) and - implicitly - all associated data without affecting my new account of Firefox (and its data) somehow?

  Thank you!

  Even if you use the same email address the two synchronize the old and the new are separated. As long as you are sure that all devices use new synchronization then the old one is no longer necessary.

  Here is the main article for help on the new sync

  • Synchronize your bookmarks Firefox, history, passwords, etc.
    • https://wiki.Mozilla.org/identity/Firefox-accounts
    • The methods used to identify you and to verify the details are quite complicated, with synchronization of the former using coupling codes, as explained in detail in these articles on cryptography in sync
      https://blog.Mozilla.org/Warner/2014/04/02/pairing-problems/
      https://blog.Mozilla.org/Warner/2014/05/23/the-new-sync-protocol/
    • Easier reading on the new sync https://blog.mozilla.org/services/2014/02/07/a-better-firefox-sync/
      And more techie information https://github.com/mozilla/fxa-auth-server/wiki/onepw-protocol
  • This applies to the new sync
    Why can't I synchronize my passwords?
    This is a problem of security and may be overcome in a future version of Firefox or synchronization. It is one of the reasons for some users can stay on the synchronization of the former. Both versions offer slightly different regarding how and what features they will sync.

• HP CP1525nw color: needing a new HP laserjet and want to get one that uses the same previous cartridges

  My printer HP laserjet CP 1525nw Color has finally succumbed to a slow death and I JUST bought 15 cartridges that cannot be returned.  How can I locate a new laserjet printer that uses these same cartridges?

  Thank you!

  According to the HP store (see http://store.hp.com/UKStore/Merch/Product.aspx?id=CE320A&opt=&sel=SUP#merch-comp-products ), the HP 128 has cartridges can only be used with the following printers:

  • HP LaserJet Pro CP1525n color printer
  • HP LaserJet Pro CP1525nw color printer
  • HP LaserJet Pro CM1415fnw color multifunction printer

• How to stop the connectivity between two computers that use the same IP address... ?

  Today, I managed to connect two computers with the same IP address. But now it is to be feared. for example, a person can access my computers using my IP and MAC address. So now, how can I stop the connectivity between these two computers. should what setting I use to stop.

  Tahnks.

  Hello

  1 have. what measures you taken to connect 2 computers with the same IP address?

  2. How are the 2 computers connected?

  3. how exactly you want to stop the connectivity between 2 computers?

  I want to tell you that 2 computers on the same network cannot have the same address. Each machine must have a unique address to identify it. A private network, as a home network connected to the internet, can be connected to a router to connect to the network, will have only 1 address, public IP address.

  In addition, if we know the IP address of a computer along the user ID and password, we can access the computer/shared files.

   
  If you are referring to the change of the IP address of the two computers, you can follow these steps and check.
   
  a. network connections open. Click the Start button, and then click Control Panel. In the search box, type 'adapter' and then, under center network and sharing, click view network connections.
  b. right click on the connection you want to change. Click on properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on the network tab. Under this connection uses the following items, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click the properties button. To specify your IP for IPv4, click on use the following IP address, and then, at the address IP, subnet mask, and gateway boxes by default, type IP address settings.
   
  A typical IPv4 address looks like 192.168.0.2; a typical subnet mask is 255.255.255.0. The default gateway is usually the address of your router.
  For example, IP address: 192.168.0.2 by 192.168.0.12 (for computers)
  Subnet mask: 255.255.255.0
  DNS: 192.168.0.1
   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• How can I synchronize catalogs on 2 computers that use the same location for the image files?

  I do not understand Lightroom.

  For example, I use LR4.2 on a desktop computer and a laptop computer. Two computers (Windows 7 64-bit) go to the same image files. On my laptop in a folder, I have 42 master images and 5 virtual (virtual events) for a total of 47 images. But when I open LR4.2 on the desktop I do not see the 5 virtual (virtual events) on the 42 master images.

  Why can not I see the 5 virtual events since I can access the exact file and how I see the virtual evidence created on the laptop on the desk.

  It has no function in LR to synchronize catalogs.

  If your pictures are on an external hard drive, you can move the file catalog to this external hard drive, and then you will have a catalogue on your desk and another on the laptop. Just use the one on your external hard drive.

  If your pictures are on a network drive, you can not put the file catalog here, so the only answer I know is to manually transfer the catalog back from one computer to the other file.

  Why can I not see the 5 virtual events since I can access the correct folder

  Lightroom does not save your work to the photo files. It stores your work in the Lightroom catalog file.

• Use the same code module to multiple steps in the sequence

  Hi all

  I tried to implement a sequence that uses the same code for all steps module in the order, but I'm not returning to it when I need to send it commands.  I got regarding the appellant the VI in a new thread so that it can be executed asynchronously.  I can run the simple sequence and it will indeed open the VI and move to the next step.  When I close the VI manually from the front, the TestStand sequence is completed, as planned.  So it turns out that I have a lot more work.

  My question is how to call the thread separate from the main sequence and other sequences overtime when I need to change the settings.  If I insert a step in the Action, I have to select a file of VI, but from what I can tell, it opens another instance of the file and does not provide an interface with the other asycronously running instance.  My next guess was to use a stage of education, but I was not able to understand how to configure the search string to call the VI settings.  In addition, I don't know how to proceed.  Please notify.

  My intention is to start the module code (asynchronously) VI, run several different subsequences in the main sequence, which call this same VI and edit its settings, close everything and report the results.  If I'm understand how TestStand is supposed to work, please let me know.

  Thank you

  GSinMN

  What I do is use a queue to send data to the asynchronous VI.  So he can run and whatever, but also receive orders from the queue.  I use a motor of Action that contains the reference to queue and sends the commands.  If you really just call the engine of the Action of your sequences.

• To connect to vCenter using the same Session with PowerCLI

  Hi all

  Is it possible that we can establish multiple connections to vCenter using the same session with Powercli.

  As connect-viserver-Server "vcenter1" - domain\domainacnt of the username-password "Password".

  is to establish several connections and we want to limit, because we are in the process of report generation based on the web developing using Powercli with IIS.

  Please suggest.

  You can use the Session parameter on the cmdlet Connect-VIServer .

  I use this for the PowerShell Workflows, see workflow of PowerShell and PowerCLI

• Schedule a task by using the service account

  To schedule tasks by using the service account and he could be executed in more than one PC. Please suggest and provide some example or screenshot.

  Hi Ravikumar,
   
  Thanks for posting your question in the Microsoft Community Forum.
   
  Based on the information, you find out to schedule tasks by using the service account and to run in multiple PCs.
  It would be useful that you can answer the question to help you further.
  Your system is connected to a domain?
   
  If your system is connected to the domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
  Windows 7
  Let us know if you need help with Windows related issues. We will be happy to help you.

• Pair several devices on the same COM Port that use the stack for windows by toshiba bluetooth?

  I have several instances of the same device...

  I wish that they all use the same COM Port when connecting to my Toughbook.
  The application that will receive data from these devices will only monitor a single COM Port assigned to.

  I have only one active connection both for couples... That's why Ifeel, this should be possible.

  Any help would be greatly appreciated

  Thank you

  Hello

  Please contact the Microsoft Community Forums. I understand you want to pair multiple devices on the same COM Port using Bluetooth.

  Unfortunately, it is impossible to pair multiple devices on the same COM Port using Bluetooth as it is by design.

  With the help of Windows-related issues feel free to post on the Forums of community of Microsoft, we will be happy to help you.

  Thank you.

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Created a form of the ADF since a human task - how to get other human tasks use the same form ADF?

  We are new on the forms of the ADF and we have a simple workflow with a few different human tasks.

  The task of the initiator, I right click it and automatically generated a form of the ADF.

  The rest of the human tasks have the same payload, and I want just the other human tasks use the same ADF form I've already created. How can I do this?

  Thank you.

  Yes, there is a way to reuse the shape of the ADF and its workflow for several human tasks as long as the payload is the same.  To do this:

  1. Open the file "hwtaskflow.xml" inside your project of the ADF.  It will be difficult to read when you first open it so right mouse click the xml file-> select "reformat".
  2. Copy the 6 lines with the element with the form that you want to reuse-> pick up the 6 lines in the file under the rows that you copied.  The and elements in the text that was copied just need to be changed from the old human task name (for example, ".../MyHumanTaskOriginal") on behalf of the human recycled news of the task (for example, ".../MyHumanTaskReused").  Don't forget to leave the text in the and items of value to their original name.
  3. Redeploy the project.

  Dan

• My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  < email published by host >

  It is illegal for a child from 6 years to create an Apple ID.

  You can take a date-genius bar with Apple and bring the original receipt Apple.

• We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

  We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

  Thank you so much: D

  ON both phones, check the settings > phone > call on other devices > Off.

• Setting the properties of elements of façade in XControl to a VI that uses the XControl

  Hi all

  I'm new to XControls and I try to use them to make a generic digital indicator that fit into a matrix of waveforms of a similar measure and allow the user to display the first value of a waveform, it chooses by selecting the name of the desired channel in the waveform table. I have the XControl work, with a ring filled automatically with the NI_ChannelName of the input waveform array fields and the value of the ring being used to index the waveform table to select the appropriate data.

  What I want to do next is automatically set the value of control of ring in the XControl to the value that the user has selected the last time he ran the VI that uses the indicator. However, the properties of the control ring do not seem to be accessible from the VI that uses the XControl, and none of the XControl General properties seem to be accessible from the front VI in the XControl. The value of the ring is not part of the entrance of DataIn cable waveform table, so I don't have a good method to pass data to the control of the ring outside of what is in this table of waveform. I might add the value in the waveform table, if this helps, but indicators XControl do not transmit their return DataOut appellant VI to allow me to record the user selected value.

  Is there a good way to read and write the properties of façade elements in an XControl of VI that uses the XControl?

  I apologize for not posting my code; the computer with LabVIEW license is having network problems at the present time. I'll post the code when I can.

  Thank you!

  Erik

  In your State cluster typedef container, include a reference to a control of the ring.

  In your vi of façade, in the case of change of Direction, create a reference to your ring and connect to a plan by which he sends out the view state.  Also be sure to write true to the status changed in the result of the Action.

  In your xctl, select New-> property.  Name it after the property in the ring that you want to access.  Use the view clustered State (in your new property VI) to access the reference to the ring; son of a property node.  Change the control value in the appropriate type & connect to the property you want.

  Be sure to connect the path error through everything that might cause an error.

  When you drop an instance of the xctl and create a property from this node, your new property will be available.