Issue of passport Simulator

I installed the virtual machine. I've updated to 10.3 API. Where's the simulator of 1440 x 1440? My Simulator shows the resolution of 768 x 1280.

Please help with an explanation of the details on how to configure the Simulator for the passport of BlackBerry.

It is a matter of configuration. Could not find any information in the docs.

Thank you!

Press ESC and choose among the options.

CLOSE THE MESSAGE.

Tags: BlackBerry Developers

Similar Questions

  • WD My Passport drive external drive will not mount once my Macbook Pro is already on

    Hello

    I actually had this problem for a year or two, but I'm finally getting bugged to this topic enough to see if it can be 'fixed '.

    I have a 2 to WD My Passport portable HD connected to my macbook pro via an external (wall outlet) powered TRUST 5 x USB3 Hub.  If everything is connected, when I start the macbook pro there is no problem and the WD My Passport is mounted in the finder.  But if I remove manually the hard drive and then try to mount it again while the macbook pro is running it doesn't mount not.  It used to, but he won't now.

    In the past the WD My passport would need to unplug and perhaps the USB3 hub would need power cable disconnect from him and the USB hubs out the macbook pro.  So when I joined this new and plugged the hard drive WD in the hub, it would rise very well.  But now it's just point blank refuses to ride until I restart the macbook pro.  Once I restart it it climbs perfectly and stays up forever--until it is dismantled manually - and then I have to restart the macbook pro again so he could mount once more.

    I tried all combinations of pull cables and adapters to power but nothing has worked.  After dismantling the WD hd and plug back on the USB3 light led on the hub hub lights up and the hard drive turns manually, but, as I say, it is not mount and it is not visible in disk utility.

    Any ideas please?  It's a bit annoying to have to keep restarting the mac whenever I had to unplug the hard drive WD.

    "As issued" WD Passport appear to cause a number of reports of trouble around here. You have already taken the first "not best" - using a powered hub. Just make sure that the hub is really power (lights on, for example). It could be that the external drive is in its death throws.

    This happen if the WD is the only thing on the powered hub?

    The Mac USB ports work with other devices?

    Here's what my experience with these things has believing me. WD made great bare discs, but I can't be so kind to their pens. Three questions:

    (1) I think that they should use chipsets which are not very easy to Mac.

    (2) most driving the ship formatted for Windows

    (3) even those shipped as "Mac editions have some odd which makes it difficult to access file formatting.

    If you do not have to share the drive with a Windows computer, you can reformat the drive and that often fixes "fail to mount/recognize" question. Disk utility is your tool of choice here because it is already installed on your Mac. Completely erase the WD drive by selecting the tab 'Clear' in the bar tabs to disk utility. Define the plan of Partition to GUID Partition map and journaled for Mac extended format. Press the button 'clear '. The reader will now will be rid of eccentric WD partitioning and formatting schemes and be a good Mac hard drive.

    If you share the road with a Windows computer, consider getting a better workout. After having fought external drives 'brand' on my computers and others that I maintain, I now use only boxes of other computer world with naked WD drives inside. Since this change, I have zero problems. For my MacBook Pro, I use this forum:

    https://eShop.MacSales.com/item/OWC/MEPMU3ES/

    I ordered the external power optionally for use at home and go on the road bus-powered. It's an empty envelope - just a hard drive of nu. They are more expensive than the stuff that Staples puts on sale every weekend, but are much more reliable. I ask the question. "What is my value data?"

  • Microsoft Combat Flight Simulator fails to load with error "...". must run16 bits or more color... ».

    Loads of Microsoft Combat Flight Simulator on my pc but I can't make it work. I tried the compatibility thing & it still do not work. Other ideas that run the game.

    Original title: Microsoft COMBAT FLIGHT SIMULATOR 2 charges on my pc but he always tells me that I have to run16 bits or more color, so it will not work. I use 32 bit on my 210 NVIDIA who worked on other older games. Good suggestions other that run the game?  Richard

    Hello

    1 have you ever done any recent hardware or change the software on the computer before this problem?

    2 are you facing this problem only with this game?

    3. What is the error message that is accurate or complete?

    Try the methods and check after each method.

    Method 1: Troubleshoot graphics issues in Flight Simulator X: http://support.Microsoft.com/kb/925722

    Method 2:

    If the problem persists, I suggest you to send your query into Microsoft Flight Simulator forums to improve assistance:

    http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

    It will be useful.

  • Error when inserting the event calendar (on Simulator)

    Hello

    I tried to run the example of pimcalendar (from GitHub WebWorks examples) on Alpha of Dev Simulator, but I got the following error:

    Need error cannot find usr/lib/webplatform/plugins/next/libpimcalendar.so library is not found

    I have the last Simulator and installed latest SDK WebWorks

    Is this a known issue with the Simulator? Or is the example, which does not work properly?

    I faced the same problem.

    All packaging the application through corrugation Simulator, make sure that in the BUILD-> TARGET SETTINGS is set to the SIMULATOR.

    Worked for me.

  • Problem of graphs with FSX on windows 7 64 bit OS

    Original title: operating FSX on windows 7 64 bit OS problems

    I finally managed to install FSX Delux on my pc running windows 7 64-bit OS.  After the first start, I select a flight and get nothing more than a flickering screeen with audio narration.  There is a drop down menu that will appear I am unable to interact with.  Finally, I stop the OS and restart to use anything other than what seems to be a "loop" effect in the FSX program.  The graphics do not appear and this is a relatively new pc with I5/AMD card :(  Can someone shed light on this problem that I would like to use the program?

    Hey firefox,.

    Here is an article from the Microsoft Knowledge Base that talks about graphics issues with Flight Simulator X. follow the troubleshooting steps. This should solve the problem.

    Solving graphic problems in Flight Simulator X
    http://support.Microsoft.com/kb/925722

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • FSX Deluxe

    Divya R. said that FSX is compatible with Windows 7. Is this true for the "Deluxe" version or just the ordinary FSX?

    I did not fall on any issues running Flight Simulator X Deluxe, with or without the expansion under Windows 7 32 - bit and 64 - bit. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

  • TLSInputStream.read () stops playback

    I am currently debugging the issue on the Simulator even if it is not specific to the Simulator. I notice that, at random, TLSInputStream.read () blocks and never received the incoming data. To keep things simple, I'm using direct TCP and using the Simulator. I am able to write data to the socket without problem so what is happening.

    I checked Wireshark and data are actually received from the server. Nowhere in the application it never attempts to read more than 1 byte at a time to prevent the other known issue when using implementation of the BlackBerry to read multiple bytes at a time.

    Thread stack:

    • Object.Wait (line): 480
    • Line TcpInputStream.read (byte [], int, int): 158
    • DataInputStream.read (byte []) line: 76
    • TLSRecordProtocol (SSLRecordProtocol) .read (DataBuffer) line: 317
    • TLSInputStream.read (line): 93
    • The reader and the author have their own sons. Reader threads unique task is to read and send what is read in another thread, so there should not be problems with device buffer fills up too quickly.

      My question is: someone at - it of another expeirenced this problem and if a solution was here?

    Welcome to the club !

    Yes, BlackBerry can sometimes stuck completely on a stream and stop receiving data regardless of the number of bytes available.

    We had to put in place a monitoring mechanism that will mark the time of the last reading in the download thread and periodically check this time from another Thread. If the difference becomes too big (14 seconds in our code; other people here used to similar values) we would simply close the connection of this other Thread, causing the main download to fail. He would then restart the download from the last position.

  • Including external containers in a compiled file cod w / Eclipse plugin

    I am trying to include a jar in my application using the Eclipse plugin.  I looked around forums and so far I got mixed messages.  On the one hand, there is a KB referring to the addition of a jar in an application in the present case:

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/How_To_-_Compi...

    The original thread (http://supportforums.blackberry.com/rim/board/message?board.id=java_dev&thread.id=6403) referred to in article, but response from the MSohm said then that it is not possible in eclipse still to include 3rd party jars in the application.  It was a few months ago and I was wondering... What is the authoritarian response?  

    Personally, I was able to relate the pot in my application in Eclipse (make the pot its own project and have a dependency of project on this issue) and the Simulator successfully to recognize that the two projects/modules are present.  However, once I have create the cod for my application file and load it into my device (via javaloader command line method), the dependent project was not deferred.  It seems that the Simulator just starts up two 'projects' but is not really associate them in the file of the Cod.

    To answer my own question: the mistake that I did, it was that I was without specifying the COD files in the form of RIM-COD-URL-#. After the have rewritten the JAD file accordingly, everything worked fine.  Here's a quick example provided by Eric Giguere.

    MIDlet-Version: 1.0.0

    MIDlet-name: My Silly App

    MIDlet-Description: wish he would do something
    MIDlet-vendor: RIM should buy us fortunes, Inc.

    RIM-COD-URL-1: library1.cod
    RIM-COD-size-1: 15088
    RIM-COD-URL-2: library2.cod
    RIM-COD-size-2: 7963

    RIM-COD-URL-3: sillyapp.cod
    RIM-COD-size-3: 41923

    Hope that helps.

    Daniel D.

  • General issues (iFilter, .syf and EM simulation environment)

    Hello!

    I have a few general questions, ranging from corresponding EM simulation symbol creation and design of network environment. I would be really grateful if someone could take some time to respond to these in as much detail as possible.

    (1) I use iMatch Wizard in iFilter to design the matching network of entry for the LNA and PA. But I noticed that I get the best correspondent for the LNA (verified by Zin measurement at the source of the device with the included matching network) when I do the correspondence for the combined impedance. However, in the case of the PA, this happens only if I design the network with the correct impedance and not its complex conjugate. Anyone know why this is the case? Or by popular practice, in which case the combined complex should be used for the corresponding network design?

    (2) how can I create my own .syf file to be used as a symbol for a system I design? If I have the .syf how do I appear in my list of existing library of symbols?

    (3) in the EM simulation environment, how to decide the spacing of the grid? Yet once, EMsight I cannot add ports in the structure of Employment, if the structure is not aligned with the grid. How to manage the grid alignment so that the ports are attached without worries? Also, in the EM structure is an available at the entrance x and is coordinated to a partciular shape/structure so that it will sit in the coordinates and will allow me to build the forms around him?

    I apologize for the length of the questions but get these deleted will help a lot!

    Thanks in advance!

    1. it is the plug.  You are probably using the gamma to the research in the output in the design of LNA (so your load must be combined), but using the desired gamma (manufacturer?) load design PA

    2. up to the v11, it's probably easier to just import the .syf in each project where you want to use: project > Circuit symbols > import symbol.  In v11, just help > show files/directories... > AppDataUser, create a folder named symbols and empty the file .syf in there.

    3 EMSight is ideal for the subset of the problems to which it applies, but otherwise it's pretty restrictive.  The ports must be on the limit, either on the walls or up/down drivers.  The latter requires a via, which does not incorporate to turn off automatically. etc.

    X and are grid sizes are defined in the enclosure.  When you draw, you can press the tab key to enter the coordinates manually.  However, I recommend that you check the mesh on the structure of your EM before you simulate to make sure that you are not shorting adjacent shapes, or decompose adjacent metal.  Download AXIEM, it blows EMSight out of the water.

  • conversion issues dynamic data in dbl/Boolean to a simulated signal

    Hello world

    I try to just do simulated flashing of the LED with a square wave. It has been 3 hours I'm looking why the does'nt of convertion of dynamic data that is updated at each iteration (it seems that the problems).

    I tried with all the options of the object to "convert", but I could not (I'm desperate)

    in the attached .vi, I chose "the most recent value.

    could have a peek at my .vi?

    Thank you very much

    Guillaume.


  • Issue of simulation with a delay of transport subsystem

    Hello

    When you use transport time in the simulation subsystem, I noticed that the time scale starts at zero, but in reality it starts at 1. For example, see below the step signal should start 1, instead, he started 2 to the plot.

    Transport time was to delay the input signal of step 5, but that's 6, shown in the plot.

    What are the reasons for this?

    Suppose I want to disable the module of the transport delay by assigning the value of zero delay, I'm getting turned out to be infinite values. Is this good?

    Your chart does not receive the information in time, simple scalars, one for each graphic update.

    For the x-axis display values in good time, x 0 (the time of the first point) and dx (interal time between points) must be known and defined in a different way. If it's always the same thing, just edit the properties of the graph for x as x 0 = 1 scale. You can also set these things through nodes of property, of course.

    Also note that cards retain their history between runs, so it's important to clear the history at the start of the program if this is important to the use case.

  • Issue of MIcrosoft Flight Simulator

    I have the microsoft standard Edition x Flight Simulator and I would like to upgrade to version however, it is possible to buy just the upgrade without having to pay for the standard version again?

    Hello

    As you need details about Microsoft Flight Simulator, I suggest you to report your query in the links for better assistance.

    http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

    http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  • Guy Android coming to BB. Installation with VMWare player/Simulator/SDK issues

    I installed it,

    C/C++ QNX Momentics IDE...installer-bbndk-BB10_0_04-win32-186-201204250810-201204251322.exe
    BlackBerry10Simulator... BlackBerry10Simulator-Installer-BB10_0_04-195-Win-201204262359.exe
    VMWare... VMware-player-version 4.0.3 - 703057.exe

    I go to the early stages of QNX Momentics IDE and try opening an example (SDK)
    I get the Setup Deployment Wizard. I go to Device Setup and choose Simulator.
    What should I do now? The last step click the HELP (?) says he launched the Simulator, but I get a page with the title "Blackberry Simulator is not found and it's looking for a file VNX. I checked and tripled check the previous steps on the help icon.

    The Simulator is deadlocked C:\Documents and Settings\User1\My Documents\Virtual Machines\BlackBerry10Simulator-BB10_0_04. And I clearly see a BlackBerry10Simulator.vmx file in there
    but the SDK app doesn't see a single VMX file. The folder 'controllers' and other records.

    I tried the VMWare Player. It works very well.

    What I am doing wrong?

    Hey be based,

    The initial installation of the IDE and Simulator can be sometimes a bit daunting. Some of these steps you've done but im going anyway to list them:

    1. raise some Code by signing keys: keys

    2. download and install Momentics IDE and install

    3. download and install Blackberry Simulator

    4 download and install VMWare

    5 disable all firewall programs including windows firewall

    6. open VMWare-> choose open a Virtual Machine-> access your VNX file and open it

    7 if it opens really slow try changing options in VMWare 2 CPU and see if you can activate the "Virtualization technology" or "AMD Virtualization" in the BIOS

    8 the address of development of the Simulator (click the icon of the person with the toothed wheel on the menu bar of your alpha dev Simulator

    9. open the IDE, click window > Preferences on Windows and select BlackBerry and click BlackBerry Setup Wizard Deployment.

    10. follow the onscreen instructions to set up your target (Simulator or device) and add your chips of the device debugging.

    11 A this point your simulator could not auto discover so add your IP address you found earlier and if you haven't added a password in your simulator then let empty password.

    12. the rest of the wizard of BlackBerry deployment configuration should work just fine.

    13 open a sample application

    14. click on the file of the bar - descriptor.xml in the Project Explorer view, and then select "Set of symbolic debugging.

    15. right click on the project file, and then select Configurations to Build > Set Active > 4 Simulator-Debug

    16. right click on the project file, and then select generate the project.

    17. then right click on the project again and select run as > BlackBerry Application C/C++

    18. If all goes well, everything should work from there.

    Remember you need to do 14-17 for each project you want to run through the Simulator. And always turn on the virtual machine before you start the IDE I found that things always work better that way.

    I hope this helps!

  • BlackBerry 10 Simulator issue

    Hi friends,

    I installed Blackberry 10 Dev Alpha Simulator. but it is the weired UI display. I'm attcahing screenshot of the Simulator screen.

    can someone give me suggestion for this? what I need to do to fix simulator.

    I solved the problem with the type of Simulator set to safe mode

  • BlackBerry Simulator 10 resize issues.

    Hey, I recently installed the SDK native BlackBerry and Simulator to go with it. As others have mentioned, the resolution of the Simulator is medium to high to fit comfortably on the screen. However, they referred to me '' correction '' that would allow resizing. Such a solution was running the app controller and change the zoom level. However, when I try this it does absolutely nothing.

    I'm on Ubuntu and I'm running the Simulator in safe mode. I have a processor intel hd 3000 (maybe 4000) and a 650M from Nvidia. The Nvidia card but cannot run the Simulator (long story involving the lack of Linux support for optimus) so I have to run out of the Intel card.

    Everything works fine except this essential feature. I have tried other options in the controller application and managed to carry out a few (by changing the volume and battery level controls), but the options that change the display such as Bruno and brightness don't work not only as the zoom level.

    My own idea to this problem is the fact that I use it in safe mode. However, it is really my only option because if I try to run it in normal one I just get a freeze on the screen with all the text.

    I don't know if I posted this in the right place, so let me know if I made a mistake! Thank you.

    Add support for zoom in safemode is on our list of features to implement, but unfortunately you can not zoom in SafeMode right now.

    NVIDIA has a set of linux for the 650M Series drivers?

Maybe you are looking for

  • Flash drive not recognizing USB - c

    I just bought the new macbook 12 inches with the retina. I am very satisfied, but I'm having some trouble with two flash drives that I bought on Amazon. Sometimes, they recognize and sometimes they are not then I reboot and they work fine. What is ha

  • Need driver Lan for A40-SP150

    Hello friends I need drivers for this laptop LAN and Wireless Lan for win XP Help me please my email is himesa dot hn-joseph Thank you

  • Want to office: corrupt BCD and system recovery?

    Just yesterday I booted up my PC and my BCD has become corrupted. I tried to fix it, but even more to the point where we have a ruined recovery device. I was wondering if I were to use a recovery disc and reinstall what is necessary I loose my files

  • Images are not displayed as thumbnails

    How have the possibility to open photos and see photos with multiple programs when I right click on a photo, I don't have the pictures anymore, I use vista and used to have thumbnails. Email removed for privacy Remember - this is a vista pubon I can

  • I can't connect wirelessly to the Internet, while other devices are able?

    I can't connect to the Internet with my laptop.  This began a few days ago.  But we can still connect to the Internet via a wireless router with other devices yet.    Page says "Internet explorer cannot display the web page. When I click on diagnose