Issue of PTZ camera

Similar Questions

• I can't install my AD018640672 order number because you ask for the previous issue. Adobe came with my computer I don't have that. Can you help me!

  I can't install my AD018640672 order number because you ask for the previous issue. Adobe came with my computer I don't have that. Can you help me!

  Hi bobj39626549,

  We could certainly help you.

  If she asks for the previous version number, then you could acquire a version upgrade.

  You must purchase the full Acrobat version so that it can be installed and activated with the serial key.

  Hope that helps.

  Kind regards

  Ana Maria

• Time issue quick capture camera

  Start using my x yesterday. And the Twisty launch for device function worked fine before. But starting today, just noticed that after I twist my phone, it will be took almost 1 minute to start the camera! Try several times and even reboot, doesn't have the same...

  Somebody help...

  Thank you very much!

  Eaccents thanks for your attention and your suggestion!

  But before you get your answer on this, I reset my X and now it works fine...

  Not sure if it was a question because I just upgraded my X 4.2 to 4.4 directly (and unfortunately), with no adjustment before installing some apps...

  And, for further study on similar issues, I'm pretty sure that there was something on the NFC feature unlock. Because I am aware of this problem after that I have to start using Motorola Skip, that also with a few unstable question (before the reset, tried to disable the NFC but do not help to camera problem).

  But anyway, after reset, so far everything goes well (including NFC unlock service).

• Issue of Web cam on the Dell with Vista laptop

  I have a web cam that is not bult in my computer, I have a dell laptop and its does not work

  Hello!

  I suggest you to check if the installation of the drivers for your webcam. If the drivers are installed, uninstall them and plug the webcam to another port and reinstall drivers.

  Concerning

  Microsoft-Most-Valuable-Professional, blog at: http://www.thecomputernext.com

• Complex issue of multi-camera editing

  I have a question of several camera.

  I have the following clips:

  1 video clip continues with audio

  24 with audio video clips taken at different times (from different angles and close ups) catches throughout continuous clip

  4-track mono mic that extend over the entire period (4 different microphones placed at various locations in the room)-they are defined as mono in the settings of the element.

  1 stereo audio clip which extends over the entire period of audio recorder separate

  When I create sequence multi-cam, audio-based, it does not complain and creates the element multi-cam.  However, when I put in a sequence, I have 26 audio tracks. Many of them are empty.  I have no audio at the beginning, although I see the video game.  The audio tracks I see seem to be all stereo, with his fate only one side.

  Is there any special way working to combine the sequence above in a multi-came track, where I can change camera angles that I prefer and then mix the audio based on who speak - IE spend an audio 7 sources and sometimes to mix some of them at different levels?

  Most of the videos I've seen does not appear to cover this level of complexity of clip, so really doesn't help.

  Any suggestions gratefully received!

  Thank you

  Dave

  What I do is manually synchronize everything in a sequence, then alt - select the video (and not audio), then right-click and embed the video tracks. Then right-click on this nested track and choose Activate/multi-cam. Now I can make multicamera on photo editing, and audio tracks are intact. I mix and remix audio to my heart's content.

  There are 2 drawbacks to this method, but for me they are tolerable. 1, you must get the synchronization just before you nest, otherwise it's a mess. 2, by balancing the sequence, you have to be sure to cut all the audio tracks at the same time to maintain synchronization.

• Issue of multi-Cam

  I have been using CC body for about 6 months now, from 5.5.  I do my first edition when I use a nested sequence and the multicam monitor.  In previous versions of the body, I implemented the project of multi camera, I'll play the video in multiple camera monitor, and I click on all cameras changes are saved to the timeline, when I stop.  When I came home to the sections where I knew that I wouldn't cut back so I would just rub on the timeline (not multiple camera monitor) and when I got to a place where I wanted to spend the cameras I would simply click on this camera in multiple camera monitor.  In CC Assembly works fine if I me playind video in multiple camera monitor and clicking on my devices, but I can't make it work by srubbing just video where I want and then clicking on a camera.  I tried to turn on the button recorde and who does not make a difference.  Is there a setting I'm missing somewhere?

  Thanks for any help.

  Phil

  When you get it to where you want, CTRL + click to make the cut.

• Re: Issue Toshiba Web Cam on the Satellite L855 - 10 p

  I have a toshiba Satellite L855 - 10 p and my webcam was working fine until today when a Skype video conference, he started showing the black lines slightly as static and the quality has declined significantly. I used the webcam app to check if it was not a problem of the internet and the same problem occurred.

  I restarted the computer and removed the protective plastic from the webcam, and nothing has changed. This is a brand new laptop, it's only 2 months. Is that what I can do to find out the nature of this problem or should I just go ahead and use the warranty?

  * Edit: I changed the quality in 1280 * 700 and the picture was of great quality without when I what was that lower that static quality is back.

  Post edited by: FranPicoto

  Hmm... You can check the video settings of webcam.
  For example the webcam supports a night mode that allows to use it for brighter images with one less noise.

  Also, there are application supports various effects that could be added to your video or pictures.

• facing the front camera is installed on the iPhone 6

  Hello! Please check this. I am aware that there are similar issues with a solution here, but I'm here for a slightly different reason.

  Now I can´t find the email to talk to an official apple which is what I need. I need a to confirm that the movement of the front facing camera is a known problem due to poor/low quality glue and goes without having the phone in a drop of water or any form of damage. This happened to me, I have never dropped my iPhone, but through the daily use (usually, no extreme movement or whatever it is) the device is passed so that the gray "half moon" covers half of the hole for the camera. So naturally I talked to the place where I bought it, it was sent to repair (ish, they never repair, they send you just a new) where we discovered that the iPhone was slightly bent. I was shocked, that I never did anything that could cause such damage, but realized that somehow he had to me. Accordingly, any warranty has been deleted, then they won´t looking at the camera because the phone is folded. I explained that the issue of the camera is well known and he did not as a result of the bending. They do not believe me, and that's why I need a Apple to write me an email saying that the problem is known and that it does not come as a result of the bending. It is the only way that I can return the guarantee for the cameras of sake. The email will be shown the guy from the store that takes care of this. I read higher than (some) iPhones suffers from a bad glue and a half moon appears, but can't find the source. Thanks for any help!

  Sincerely

  Oscar

  While it is true that there are those who knew their glass/screen covering part of their front facing camera, this question can also be reproduced with force by bending from your iPhone. I would have meant you for nothing to happen, of course, but as it is now, there is no way to verify what happened before the others, as the only documentation they have of this is an afterthought. The issue of bending to the iPhone, whose screen is fixed to, and the movement of the screen of his normal place which covered now your camera, are present.

  That aside, however, if you already had Apple inspect this device as it looks like you have, you will need to pursue any other opportunities on this through the same avenue. Contact Apple for support and service - Apple Support

  Wish I had better news for you

• EA6500 - Canon sx510HS - connects, then disk - camera cannot see the network

  Ok. Previously, I had a Netgear WNDR3300 and the device connected to the G network without problem and is remained connected. When I use the EA6500.

  First of all, I see the network 2.4 comments when I search a network on the camera. I don't see the 2.4 or 5 ghz network. WPS will not find the camera and vice versa. Even if I try the PIN issued by the camera.

  Secondly, when I manually add the camera to the network and enter the password, it connects for about 15 seconds then disconnects.

  In the third place. When you use the option 'synchronize', the networks are not yet seen by the camera, but the camera connects to the network that I added manually, as in question 2, and stay tuned for a long time, however, it is necessary for the sync/copy all the new images in a folder on my pc.

  So I'm puzzled as to why the camera connected so easily with the netgear and this Linksys EA6500 he will not keep the connection. any help would be appreciated. Thank you!

  Hi mtbmesa,

  How far is the camera of your router? Outside the camera you have other wireless devices that connects very well with the router? What is the brand of the camera?

  Try these settings:

  SSID: must be different for 2.4 GHZ and 5 GHz

  Network mode: mixed

  Security mode: WPA2/WPA mixed personal

  Channel width: 20 MHz

  Channel: 3, 6 or 9

  I would like to know if it works.

• Tablet crash when you open the camera app

  I recently received a Dell coming Pro 8 and I'm having some major issues with the camera application and any other application tries to access the camera on the tablet.  When I try to use the camera, I get a blue screen of death, I guess you could say. "Restart your PC on a problem and needs".  The error I'm getting attempted_execute_of_noexecute_memory.  This tablet is brand new and there is barely anything installed on it except photoshop.  I hope you guys can give me help!  Thank you.

  I had the same problem with the same device & resolved as follows;  uninstalled the imaging device driver & chose to delete at the same time the driver in Device Manager and then restarted. camera works now.

• Cannot open files in Camera Raw in Bridge CS6

  30/05/2014

  Believe that this problem happened after automatic update to Adobe (but not sure).

  Always transferred files from camera in the bridge, then make some changes by opening JPEG and RAW (NEF) files in Camera Raw in bridge.

  Now, "open in Camera Raw" is grayed out and I can't find a way to open files with Camera Raw inside Bridge CS6.  This seemed to happen suddenly and without new software or applications added to the computer.  All the other apps/software works well.

  Have you tried various bugs found on Adobe community discussions without success.  Now ongoing problem for more than a week +.

  Am able to open files in Photoshop without problem, but want to be able to make some quick changes using Camera Raw, open files from Bridge CS6.

  I use Bridge CS6 Version 5.0.2.4.  (as part of Adobe Creative Suite 6).  Update says I have the latest version of the bridge.

  I use an iMac with Intel Core i7 processor computer

  OS X 10.8.5

  Found others with this same or very similar problems on the forums but it either can't understand access plan/patches or impossibility of complete instructions on my computer.

  See for example: Camera RAW update the question with Bridge CS6

  Since this link/discussion, we find this "solution":

  Updated Camera Raw 8.4, Bridge CS6 Mac OS is not display the image metadata, or allow you to edit images in Camera Raw.

  Upward

  Manually install the camera Raw plugin 8.4.

  1. Exit Adobe Bridge.
  2. Download the file below.
  3. Find and double-click on the downloaded file to unzip it. The resulting file is camera Raw.plugin.
  4. Navigate to the folder Macintosh HD.
  5. Open the folder/Library/Application Support / Adobe / Plug - Ins / CS6 / File Formats.
     IMPORTANT: Navigate to the folder root of the library on your hard drive, not the library folder in your user folder.
  6. Copy the step 3 Camera Raw.plugin file Formats folder.
     IMPORTANT: This new file overwrites the file already in this folder. It is important that a single camera Raw.plugin file located in this folder.
  7. Open Adobe Bridge.
  Camera Raw.plugin.zip
  Mac OS Camera Raw plugin 8.4 for a manual installation

  
  

  However, when I try the above, I have these questions:

  1. when I double click on the downloaded file, my computer opens PhotoShop and an error message is displayed, that States "could not complete your request because Photoshop does not recognize this file type."  (I think this may mean my computer is automatically unzipped the file, but I'm not sure about that).

  2 not quite sure I don't know how 'navigate to the folder Macintosh HD' suggested in step 4 above (OK, I'm new on Mac; since a long time PC user...)

  3. when I am in the 'Finder' and click on 'GO' while holding down the button 'Option', I find "library".  in this context, I find ' / Library/Application Support/Adobe ", but there is no 'Plugins' folder in the subfolder"Adobe ".

  4 don't know how if I'm in the 'library root' on my drive hard vs 'library under my user folder '.  (New, new Mac...)

  I have NOT yet tried to make a "Uninstall" and then re - install Adobe Creative Suite 6 together and I would like to avoid that if possible.

  Absolutely would LOVE it if Adobe would simply push an update that should fix this problem or if someone could explain to me how I could restore the previous version that worked perfectly for me.

  Any help, suggestions (in very basic, simple terms that any fool again in the world of Macintosh can understand) would be appreciated.  Very frustrated with Adobe at the moment.

  Especially like the switch to Mac, but with this and my picture to come to a sudden stop workflow, have doubts.  (But I guess that the update of Adobe for PC can cause problems as well).

  Thanks in advance for any help/suggestions.

  30/05/2014

  Literally minutes after I posted the above, I thought that this myself and now I'm a happy camper and things are back to normal!

  Here's my question/error: as a new Mac user, I was not negotiating/find files on my hard drive correctly.

  In case there are others out there with this same question (and I'm apparently dense):

  Here's what I did which resulted in a correction:

  First steps:

  1 exit/close bridge

  2. as stated in the post above, go to this link to download the Camera Raw Plugin file:

  Issue update to Camera RAW with Bridge CS6

  Link to download is towards the end of the instructions, but I try to insert this link for download here:

  Camera Raw.plugin.zip

  3. once the file has been downloaded, find her using "Finder" click "Finder" and look on the options list on the left side of the Finder window to find "downloads".  On my computer, clicking on "Finder" these options appear in the list on the left:

  All my files

  Air drop

  Applications

  Desktop

  Documents

  Downloads

  Movies

  Music

  Photos

  4. download you just made should be at or near the top of your download list should be designated as 'Camera Raw.plugin' and will be 83.5 MB size

  5. I clicked (two fingers on the touchpad) to bring up the drop-down options menu and choose 'Copy 'Caméra Raw.plugin' ' this list to copy the file.

  Now, you copied the plug that will correct this problem.  The second set of steps below will guide you through how to replace the file that is located on your hard drive with this record in the file you copied.

  Second series of measures (and this is where, as a new Mac user, I was confused at the beginning)

  1. even once, click 'Finder' on your Mac.

  2. the top of the screen, find 'GO' and click on it.  ("File, edit, view, GO, window, help", you should see "Finder" in the upper right corner of your screen, then click on the THUMB)

  3. in the drop-down menu that appears, click on 'computer '.

  

  4. then double-click on "Macintosh HD" to open your hard drive

  5. then double-click on the "Library" folder to open that.

  6. then, click on "Application Support" folder to open that.

  7. then, double-click the "Adobe" folder to open that.

  8. then, double-click on the "Plug-Ins" folder to open that

  9. now double click on "CS6" to open this folder.

  10. Finally, double-click on the "File Formats" folder that appears.

  11. NOW you should see this:

  

  12. click right (two finger press if you use a Tablet) to open the options window.  Select 'paste' by clicking on this option.

  

  13. you will be prompted with an option to keep existing file replace GOLD file.  Choose "Replace" according to the new "Caméra Raw.plugin" file in this folder.

  Finally, if you now go back and open Bridge CS6, you should be good to go.

  Hope this helps someone out there.

  I hope that future updates to Adobe will be better.

• issues of update 4.0 to 4.1

  I am almost complete with the upgrade to vCenter 4.0 to 4.1 but have some questions of closing to help clean up some issues that I came across. The first is an error HA.

  1. "cannot complete the confiruration of the HA agent on the host" it sits on a hostand that host is be an IBM 3650 M2.  The other two hosts are 3650'2 but not M2.

  2. perhaps some DNS issues but I don't think sionce so I can do a NSLOOKUP of the host vcenter server.  It is wise or unwise to change any information of intellectual property on the new server for the old server info?

  3. Finally, what is the best way to handl the update manager?  Should I simply recreate everythign or should I migrate?

  Any help or comments are welcome.  Thank you all for a great site!

  Perry

  you don't have all your hosts added to vCenter using the FULL domain name, correct?  If this is not the case, unplug and remove then add with FULL domain name.  See also below for a troubleshooting more

  http://KB.VMware.com/kb/1001596

• Damaged screen coated end of 2013 Macbook Pro?

  MacBook Pro 15 inch model of retina end 2013 - OS X El Capitan

  The coating of the screen of my macbook covered the period I owned, just to clean it with a cloth that has come with the macbook. At first, I thought it might just be an isolated issue, but it came to my attention that several other macbook owners have suffered similar damage to the coating of the screen. I read some articles and apparently Apple have a current repair for screens.

  My Macbook is no longer under warranty because of me buy in late 2013.

  My question to all of this is; Apple will replace screens and/or coating? If not, is there a way I can fix this and prevent it from happening again?

  - Cohen

  Link to article on the replacement screens - http://www.macworld.com/article/2994479/macbook/report-apple-will-replace-retina-macbook-pro-screens-with-bad-coating.ht...

  Please contact Apple as soon as possible.

  Genius Bar reservation

  http://www.Apple.com/retail/Geniusbar/

• Link HP - mouse 5 battery replacement

  I've had my link HP - 5 mouse for over a year now and it started to freeze frequently so I thought that I should change the batteries. Got the box out and looked at the paperwork, and there is no instructions on how to change the batteries. I had to take off the top cover and can see both batteries but cannot work out how to remove them. I know I'll probably feel stupid to ask, but can anyone out there tell me how or email a copy of the instructions for HP? I'm a newbie here so I really hope that someone can help you. Bonnie

  p.s. If I get a reply, I get a prompt email as I do with the other site?

  If ok, I did so with the help of a friend.

  Hi Bonnie1810, sorry to hear that you have had problems with the replacement of the batteries on your wireless mouse. I did some research for you on this issue, and I came across a great YouTube video that gives detailed instructions on how to change the batteries on a wireless mouse. Now, if this isn't the mouse you still we simulō in many ways. If you still have questions, please let me know and I'll be happy to the research question.

  http://www.YouTube.com/watch?v=V_8yfIVGYRI

  Thanks for your time.

• LabView can generate with a click of the mouse to another program?

  I have an old PTZ camera and need to control the panorama functions / tilt but cannot interface for the camera software. I can control the camera through the old interface of the screen. Is it possible to generate a signal indicating that the operating system (Win XP) would interpret as a click of the mouse on the screen of the camera interface?

  Thank you

  Hi Rick,

  It's a bit of work, but the windows API provides functions for control of the mouse.  There are many available positions on this point, for example...

  I don't know if .NET offers any mouse event tools - if yes, it would be simpler.

  There are tools called 'Macro Recorder' that you could use to save some actions keyboard and/or mouse - and call these actions later using LabVIEW.

  If, by chance, the camera controls are sent via RS232, it would be possible to 'sniff' the comm interface and understand what the syntax is - then you wouldn't need the old application at all!

  Chance/Cheers.