Issue of re - install 5.0.0.681 blackBerry Smartphones

I can't create alerts for my curve 8520 especially for emails. So I think of 681 re-installation.

Is this get rid me of my current phone settings or simply replaces the actual programs. For example my accounts of e-mail, brightness, icons positions etc?

Thank you

Hello.

The Blackberry Desktop Software will automatically back up and restore the handset during the re-installation, worst case scenario emails can stop coming through but in this case you get just your network to resend your service books (settings) and they will be sufficient.

Hope this helps

Tags: BlackBerry Smartphones

Similar Questions

  • Error 1904 - cannot install the Software Desktop for blackBerry Smartphones

    I also had similar problems I've read on previous posts. I have four boxes of different error that arises when you try to install the software. I tried everything that was recommended at the previous posters, nothing helps.  Becoming very frustrated. I have a blackberry 8330 and windows xp. All reference failure to check of the diff dll errors. Any other suggestions?

    You may think using DTM WITHOUT Media Manager. Use the procedures to uninstall/install sdgardne, but download DTM without Media Manager.  Once done,

    Go to options-support card on your BB
    The settings should be:

    Media card support: on
    Encryption mode: no
    Mass storage Mode support: on
    Auto enable mass storage Mode when connected: Yes

    Once activated, when you connect your BB via the usb port, a windows Explorer will open and show your device as another drive on your pc. Then, you can simply drag-and - drop your photos, videos, music, documents between your pc and the BB.

  • Not installed on the bold 9780 blackBerry Smartphones blackberry maps

    Hello

    I have a Blackberry Bold 9780, OS 6.0.0.359, and I don't have blackberry maps on my phone. I bought it on amazon and the description says that the cards would be included.

    Can you tell me where to find blackberry maps?

    Thank you

    Try to go to: Options-> device-> application management

    See if his list here. If it is, then its possible that you don't have a data plan put in place for your Blackberry, or as in my case, some service books when out of my account with my ISP.

  • Known issues on the Platform 4.6.1.112 blackBerry Smartphones


    Maybe this can be the solution for someone with the same problem:
    http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=55686#M55686

  • in el Tengo mi laptop xp window, instale el destokp Manager of blackberry y no me lo permite open, esto lo I made muchas veces y siempre pasa lo mismo

    in el Tengo mi laptop xp window, instale el destokp Manager of blackberry y no me lo permite open, esto lo I made muchas veces y siempre pasa lo mismo. that respond can haber, me could informar cuanto antes

    Elisa * address email is removed from the privacy *.

    suicídio gracias...

    Hi ElisaRodriguezUD,

    Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

     

    http://support.Microsoft.com/common/international.aspx

    I hope this helps.

  • 3/10/11: Vista update story reported that an update to the Blackberry smartphone failed to install. How can I get this update or at least know why it has not installed?

    Here are the associated error message.

    Research in Motion - other hardware - BlackBerry Smartphone

    Installation date: 10/04/2011 03:00

    Installation status: failed

    Error details: Code 800F020B

    Update type: recommended

    Research in Motion, another update of the software of hardware released in April 2008

    More information:

    http://winqual.Microsoft.com/support/?DriverID=20165724

    Help and Support:

    http://support.Microsoft.com/select/?target=hub

    Hello

    If Windows Update error 800f020b while trying to install updates, an update that you are trying to install applies to a device that is not connected to the computer. Make sure all your devices are connected and turned on, and then try to install updates again.

    Refer to this article for more information:
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800f020b

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • My 9800 torch blackBerry smartphones is not install apps and I can't set up my gmail account

    Please help me I download apps on my torch 9800 help bb world bt it dosent install on my fone, as he tells me that there was a problem installin the application please try again later... even if I try to download outside bbworld it tells me failed to download... on the configuration of e-mail d it always tell me 'address incorrect email or password'... Please help me

    OK, I can't say enough. But I'm like described KB as a lack of policy is NOT what you have, which means that you have a COMPUTER policy on your device. It's just weird because I've never seen a COMPUTER policy like what you describe, but then of course I have not seen anyone.

    So, I think (it's more than that, actually) is that you do indeed have a policy COMPUTER on your device that may well be the reason for the failure of the installation, you encounter.

    If it's a working or otherwise associated with certain BES service device, then you need to talk to anyone who provides the BES service on your problem... they control what is the it policy.

    If this is not a working device and/or you do not subscribe to any service of BES-level from anyone, then the conjecture is that you have received this camera as previously used, and the previous owner didn't properly clean the it policy, leaving you with a latent policy causing you these problems. To remedy this situation, you must make sure you have a full backup, according to the link in my sig auto on my posts. Then proceed you to this:

    • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

    Once finished, your device will be like new again, with nothing on it... No. data, no added applications, etc. If you continue to restore the backup, do not forget that you DO NOT make a simple full restore... restore instead, only those databases that you need (e.g., contacts, calendar, etc.) and more precisely to avoid any database that have nothing to do with BES, business, political, etc. If you restore that contains the it policy, it he will dutifully restore your BB and you will be right where you are now.

    Good luck!

  • BlackBerry smartphones updated software now issues:(aider!!)

    Hi guys. so I've updated my software on my bb curve 8520... Well the bb desktop software had asked me to do the experience works best with my phone. but it turns out to be the opposite. I can not call more I get this message when I try to call someone "can't call the current call" or if I managed to call I can't hang up unless the caller hangs up. my memory card is not working, or more, music and videos say 'impossible to read the content' but I can see all my photos. I can not view my airtime balance or update my bis. I tried to connect my memory card on my pc and it works fine when connected but as soon as I disconnect plays anything from my phone. I rebooted a million times. formatted the entire phone but nothing works! my alarm does not sound and sometimes when someone me the your text does not ring SMS. the update is performed from a 107... something to an update from 1788. I can do to fix all these technical stuff... im convinced this isn't the physical phone that is damaged. your help will be very appreciated. thanx

    Hello and welcome to the community!

    Given what you describe, I think that is better to a clean OS reload. The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry smartphone how to install the new language? == > french

    By mistake I delete all my blackBerry Bold 9900 formulations.

    Rest than English.

    I would add yet another language ==> french example...

    In desktop software, I don't have in Applications: "Language and support of entry" to choose...

    Hello and welcome to the community!

    The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.
    • Use this KB to help you choose the good alternative OS to include the language you want:
      • Article ID: KB05305 Location of support for BlackBerry smartphones

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue. During the process, when it presents you with the screen of the things Application Loader to install on your device, make sure to develop options and select all items that relate to your desired language.

    Once the operating system is loaded, you can proceed with the activation of the language you want and restoring your backup (on the device).

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • Java.lang.error after installing yahoo messenger blackBerry Smartphones

    Hi, I know it's a constant problem... I have taken a lot of steps, but can't seem to find the option to delete for the module Yahoo Messenger that causes this error appears whenever I start the phone...

    How can I get rid of this problem? I use a Curve 8320 in Malaysia... I tried deleting the phone and via the desktop client...

    If the two they do not work, what other options do I have? Flash the ROM maybe? If yes how can I do that?

    Have you tried the article knowledge base of the rim: KB14630

    On the start screen on the BlackBerry smartphone, click Options > Applications.
    Display the menu, and then click Modules.
    Highlight net_rim_yahoo_messenger.
    Display the menu and click on delete.
    Install Yahoo! Messenger for BlackBerry version 2.0 on your BlackBerry smartphone smartphones.

  • Issues with the blackberry desktop software-blackBerry Smartphones

    whenever I connect my BB 9810 torch for BB desktop software, it shows apps that has been installed on my phone only...

    I want to install the input language and other things but it doesn't show them

    my phone is havin OS7.1

    Hello rhythm_mittal

    Before running the desktop software make sure that your PC is connected to an active Internet, besides availability of languages depends on carrier and the OS pack you have installed on your device, what language you are looking for on your 9810?

    Please read the Knowledge Base:

    KB13067 : How to get smart BlackBerry phone language packs.

    KB05305 : Localization support for BlackBerry Smartphones.

     

    Try it and let us know if you have any questions.

  • Issues with BBM blackBerry Smartphones

    Whenever I charge my phone or restart I notice my bbm dates back to ancient times, I get previous pings and current pings will no longer appear, also dp displays more peoples. I decided to back up my contacts, delete and re install the app but realized after the reboot, I can download is no longer bbm as he shows me app World, bbm is already installed, but can't find anywhere in my phone. Please help I need my bbm back

    Hello presh007

    Welcome to the Forums of the BlackBerry Support

    If you already verified and that you are unable to locate your BBM icon, then you should try reinstalling the BlackBerry Messenger application, it may be useful.

    To do it from your home screen to go to Options > device > Application Management > locate and delete BlackBerry Messenger from this list.

    KB10040 : How to view or delete the application installed on a blackberry smartphone 

     

    Deleted once perform a battery pull reboot by removing the battery while your device is turned on, wait a min. and then reinsert this return.

    Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the most recent version available. After installation, restart your device once more, connecting with your BlackBerry ID and check if you are able to send BBM to one of these devices.

    Please try it and let us know of your progress.

  • BlackBerry Smartphones (curve BB 8310) how to make BB IM installed on my curve w / a MAC? GRRRRR

    I need help for BB IM installed on my curve, download says I need to use the Desktop Manager.  I have a mac, not a desktop computer, I need the software or another download, im confused?

    Hi ness 23,.

    You can download BlackBerry Messenger by going to http://mobile.blackberry.com using your BlackBerry smartphone. You can find in the section "Staying in touch".

  • Problem installing the update of blackBerry Smartphones BB App World

    I have a very old BlackBerry App World build my torch.  While I wait for a Z10/Q10, I try to update.  For some reason when I update to 2.1.1.2 to 4.3.0.26 I get a Setup error.  Any suggestions on how to do it?  I don't see a way to remove the BlackBerry App World and reinstall.  Thank you.

    -Eric

    Hi ericschiff

    Welcome to the Forums of the BlackBerry Support

    What model of torch you have! If you encounter a problem with the update you can try to re - install BlackBerry World. For which first of all, go to Options > device > application > locate and remove BlackBerry World of this list.

    KB10040 : How to view or delete an installed BlackBerry smartphone applications

    After deletion to perform a battery pull reboot by removing the battery in your device is on.  After you restart your BlackBerry browser go to www.blackberry.com/appworld and download the most recent version. Perform a restart after the installation.

    Try it and tell us if you feel any problem.

  • BlackBerry smartphone how to install apps on my bb

    I know it's a pretty stupid question, but I am trying to install a new app on my storm. 'S called it stormslider. Stormslider

    I downloaded the file and the file type is a .jad file when I go to my bb Desktop Manager and try to add the application, it does not appear to recognize it. I opened the application loader it shows my apps that I have already installed before. But when I click on browse to click on the app it recoginzes only files with a type of file .ali .alx files. If I do something wrong? I'm so lost.

    Thank you.

    There are 3 important files for installation on a BlackBerry smartphone:

    1. the *.cod file. It contains the application and the application's resources.

    2. the *.jad file, it is necessary when you install *.cod via the internet connection.

    3. the file * .alx, it is necessary when you install an application via the Desktop Manager.

    So there must always be a file *.jad *.cod or a *.cod and *.alx together. When you install an application via the Desktop Manager, make sure that the *.cod and the *.alx file are in the same folder.

    -Fabian

Maybe you are looking for