Issue of scanning for deskjet F335

Similar Questions

• DeskJet 3055A: scanning for Deskjet 3055 software

  Following a restoration of windows 10 I had to reinstall the printer and software drivers on the website of HP and again after uninstalling my laptop from the CD rom. It prints OK but the scan options do not arise under all the apps. the only way to scan using windows fax and scan, which gives only tiff and jpeg options. How to restore the normal backup applications and options of pdf I had before installing windows 10?

  Thank you

  Hello

  Thank you for using the HP forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• IP address for deskjet 3055A js11

  ineed the IP for deskjet 3055A j611

  Hello

  It's in your home network, we do not know. You can find the IP addresses of your home network by issuing a command in Windows. The next step is for Windows 7:

  b click Start,

  b type cmd in the box of serch that press ENTER,

  (c) type IPCONFIG, and then press ENTER.

  You can see a list of all devices/computers on your home network.

  Kind regards.

• DeskJet f335 all-in-one: deskjet f335 all-in-one, says no paper but prints a sheet of test without problem

  DeskJet f335 all-in-one does not recognize that there is paper in it.  Prints a page of test very well.  Will not print a document.

  So far, I disconnected and detached, has released the ink cartridges, expected 5 minutes, then restarted the computer, plugged into the printer and attached the usb between the 2.

  The message on the screen of the computer has changed to "error: no more paper" to "on paper."  Otherwise, no change.

  Any suggestions?  I think there is a secret combination of buttons to push, which will operate - as pressing undo while pressing the color printing prints a self-test.  Anyone know the secret?

  Hello @eac510!

  Thanks for posting on the HP Forums!

  I see that your computer displays the printer's paper when you print a document.  You also mentioned that the printer is successful when you make a report self-test.  If the printer is able to print a self-test report then the material works correctly and you are probably looking to a software problem.  Unfortunately there is no combination of buttons on the printer to solve this problem.

  The first thing I recommend is to uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.

  To uninstall the HP software, click here: uninstall the HP software

  To perform a disk cleanup, click here: perform a disk cleanup

  To download the HP software, click here: HP Deskjet full feature software and drivers

  Please post back and let me know if this worked for you.

• When I scan for Windows Vista Service Pack update (published 4/2009) comes in,

  I redid my computer a few months ago restore to factory settings and restore my files from a backup disk. Everything seemed to work properly.  A few weeks ago a full scan found a worm & some virus which I removed. Now, I have a problem with the updates. When I scan for Windows Vista Service Pack update (published 4/2009) arrives.  When I click to install it, it is saying it is correctly installed (in 30 seconds) and yet he continues to come when I'm scanning for updates.    Should I restore settings again?  After looking for info on the forums of windows, I did the System File Checker to check corrupt files.  Several corrupted files appear in the details of the SFC.  But their fixation is "over my head".   I glued the SFC details below. Any help would be appreciated.  Thank you

  2012-09-04 11:51:44, info CSI 00000006 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:44, transaction Info CSI 00000007 [SR] beginning verify and repair
  2012-09-04 11:51:47, info CSI 00000009 [SR] full audit
  2012-09-04 11:51:48, CSI of information 0000000 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:51:48, CSI Info 0000000b transaction [SR] beginning verify and repair
  2012-09-04 11:51:53, CSI to 0000000 d [SR] full audit information
  2012-09-04 11:51:53, CSI 0000000e Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:53, CSI Info 0000000f transaction [SR] beginning verify and repair
  2012-09-04 11:51:55, info CSI 00000011 [SR] full audit
  2012-09-04 11:51:56, info CSI 00000012 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:56, transaction Info CSI 00000013 [SR] beginning verify and repair
  2012-09-04 11:51:57, info CSI 00000015 [SR] full audit
  2012-09-04 11:51:57, info CSI 00000016 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:57, Info CSI 00000017 [SR] beginning verify and repair
  2012-09-04 11:51:59, info CSI 00000019 [SR] full audit
  2012-09-04 11:51:59, CSI Info 0000001 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:51:59, CSI Info 0000001 b transaction [SR] beginning verify and repair
  2012-09-04 11:52:01, CSI Info 0000001 d [SR] full audit
  2012-09-04 11:52:01, 0000001e Info [SR] CSI components check 100 (0 x 00000064)
  2012-09-04 11:52:01, CSI Info 0000001f transaction [SR] beginning verify and repair
  2012-09-04 11:52:03, info CSI 00000021 [SR] full audit
  2012-09-04 11:52:03, info CSI 00000022 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:03, transaction Info CSI 00000023 [SR] beginning verify and repair
  2012-09-04 11:52:04, info CSI 00000025 [SR] full audit
  2012-09-04 11:52:05, info CSI 00000026 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:05, the transaction Info CSI 00000027 [SR] beginning verify and repair
  2012-09-04 11:52:06, info CSI 00000029 [SR] full audit
  2012-09-04 11:52:07, CSI Info 0000002 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:52:07, CSI Info 0000002b transaction [SR] beginning verify and repair
  2012-09-04 11:52:09, info CSI 0000002d [SR] full audit
  2012-09-04 11:52:09, CSI [SR] 0000002e Info components check 100 (0 x 00000064)
  2012-09-04 11:52:09, CSI Info 0000002f transaction [SR] beginning verify and repair
  2012-09-04 11:52:11, info CSI 00000031 [SR] full audit
  2012-09-04 11:52:12, info CSI 00000032 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:12, transaction Info CSI 00000033 [SR] beginning verify and repair
  2012-09-04 11:52:13, info CSI 00000035 [SR] full audit
  2012-09-04 11:52:14, info CSI 00000036 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:14, transaction Info CSI 00000037 [SR] beginning verify and repair
  2012-09-04 11:52:15, Info CSI 00000039 [SR] check complete
  2012-09-04 11:52:16, CSI Info 0000003 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:52:16, CSI Info 0000003b transaction [SR] beginning verify and repair
  2012-09-04 11:52:19, info CSI 0000003d [SR] full audit
  2012-09-04 11:52:19, CSI 0000003e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:52:19, CSI Info 0000003f transaction [SR] beginning verify and repair
  2012-09-04 11:52:24, info CSI 00000041 [SR] full audit
  2012-09-04 11:52:24, info CSI 00000042 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:24, transaction Info CSI 00000043 [SR] beginning verify and repair
  2012-09-04 11:52:29, info CSI 00000046 [SR] full audit
  2012-09-04 11:52:29, info CSI 00000047 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:29, transaction Info CSI 00000048 [SR] beginning verify and repair
  2012-09-04 11:52:33, CSI Info 0000004a Verify [SR] full
  2012-09-04 11:52:34, CSI Info 0000004 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:52:34, CSI Info 0000004 c [SR] beginning verify and repair operation
  2012-09-04 11:52:37, CSI 0000004f [SR] Verify Info full
  2012-09-04 11:52:38, info CSI 00000050 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:38, Info CSI 00000051 [SR] beginning verify and repair
  2012-09-04 11:52:43, info CSI 00000053 [SR] full audit
  2012-09-04 11:52:43, info CSI 00000054 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:43, transaction Info CSI 00000055 [SR] beginning verify and repair
  2012-09-04 11:52:51, CSI 0000005f [SR] Verify Info full
  2012-09-04 11:52:51, info CSI 00000060 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:51, transaction Info CSI 00000061 [SR] beginning verify and repair
  2012-09-04 11:52:55, info CSI 00000063 [SR] full audit
  2012-09-04 11:52:56, info CSI 00000064 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:56, transaction Info CSI 00000065 [SR] beginning verify and repair
  2012-09-04 11:53, info CSI 00000067 [SR] full audit
  2012-09-04 11:53, info CSI 00000068 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53, transaction Info CSI 00000069 [SR] beginning verify and repair
  2012-09-04 11:53:05, CSI Info 0000006b Verify [SR] full
  2012-09-04 11:53:06, components of CSI Info 0000006 c [SR] 100 audit (0 x 00000064)
  2012-09-04 11:53:06, CSI Info 0000006 d [SR] beginning verify and repair transaction
  2012-09-04 11:53:14, CSI Info 0000006f Verify [SR] full
  2012-09-04 11:53:15, info CSI 00000070 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:15, transaction Info CSI 00000071 [SR] beginning verify and repair
  2012-09-04 11:53:24, Info CSI 00000075 [SR] check complete
  2012-09-04 11:53:24, info CSI 00000076 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:24, transaction Info CSI 00000077 [SR] beginning verify and repair
  2012-09-04 11:53:38, info CSI 00000079 [SR] full audit
  2012-09-04 11:53:38, CSI Info 0000007 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:53:38, CSI Info 0000007 b transaction [SR] beginning verify and repair
  2012-09-04 11:53:52, CSI Info 0000007 d [SR] full audit
  2012-09-04 11:53:52, CSI 0000007e Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:52, CSI Info 0000007f transaction [SR] beginning verify and repair
  2012-09-04 11:53:55, info CSI 00000081 [SR] full audit
  2012-09-04 11:53:55, info CSI 00000082 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:55, transaction Info CSI 00000083 [SR] beginning verify and repair
  2012-09-04 11:53:57, info CSI 00000085 [SR] full audit
  2012-09-04 11:53:57, info CSI 00000086 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:57, Info CSI 00000087 [SR] beginning verify and repair
  2012-09-04 11:53:59, info CSI 00000089 [SR] full audit
  2012-09-04 11:53:59, CSI Info 0000008 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:53:59, CSI Info 0000008b transaction [SR] beginning verify and repair
  2012-09-04 11:54:09, 000000 a 9 CSI Info [SR] verification complete
  2012-09-04 11:54:10, 000000aa CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:10, CSI Info 000000ab transaction [SR] beginning verify and repair
  2012-09-04 11:54:11, 000000ad CSI Info [SR] verification complete
  2012-09-04 11:54:11, 000000ae CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:11, 000000af CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:14, 000000 b 1 CSI Info [SR] verification complete
  2012-09-04 11:54:15, 000000 b 2 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:15, 000000 b 3 CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:19, 000000 b 5 CSI Info [SR] verification complete
  2012-09-04 11:54:19, 000000 b 6 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:19, 000000 b 7 CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:26, 000000 b 9 CSI Info [SR] verification complete
  2012-09-04 11:54:27, 000000ba CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:27, 000000bb CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:32, 000000bd CSI Info [SR] verification complete
  2012-09-04 11:54:32, 000000be CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:32, CSI Info 000000bf transaction [SR] beginning verify and repair
  2012-09-04 11:54:38, CSI Info 000000 c 1 [SR] full check
  2012-09-04 11:54:38, CSI Info 000000 c 2 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:38, CSI Info 000000 c 3 [SR] beginning operation check and repair
  2012-09-04 11:54:42, CSI Info 000000 c 5 [SR] full check
  2012-09-04 11:54:42, CSI 000000C6 [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:54:42, CSI Info 000000 c 7 [SR] beginning operation check and repair
  2012-09-04 11:54:46, CSI Info 000000 c 9 [SR] full check
  2012-09-04 11:54:47, 000000 CSI Info [SR] this component check 100 (0 x 00000064)
  2012-09-04 11:54:47, CSI Info 000000cb transaction [SR] beginning verify and repair
  2012-09-04 11:54:57, CSI Info 000000dc Verify [SR] full
  2012-09-04 11:54:57, Info CSI [SR] 000000dd components check 100 (0 x 00000064)
  2012-09-04 11:54:57, CSI Info 000000de transaction [SR] beginning verify and repair
  2012-09-04 11:55:08, 000000f4 CSI Info [SR] verification complete
  2012-09-04 11:55:09, 000000f5 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:09, CSI Info 000000f6 transaction [SR] beginning verify and repair
  2012-09-04 11:55:30, 000000f8 CSI Info [SR] verification complete
  2012-09-04 11:55:31, 000000f9 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:31, 000000fa CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:55:42, CSI Info 000000 fc [SR] full audit
  2012-09-04 11:55:42, 000000fd CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:42, CSI Info 000000fe transaction [SR] beginning verify and repair
  2012-09-04 11:55:55, info CSI 00000100 [SR] full audit
  2012-09-04 11:55:55, info CSI 00000101 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:55, transaction Info CSI 00000102 [SR] beginning verify and repair
  2012-09-04 11:55:57, info CSI 00000104 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:01, info CSI 00000106 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:01, info CSI 00000107 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
  2012-09-04 11:56:01, CSI Info 0000010a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2012-09-04 11:56:01, CSI Info 0000010 c [SR] full audit
  2012-09-04 11:56:01, components of CSI Info 0000010 d [SR] 100 audit (0 x 00000064)
  2012-09-04 11:56:01, Info CSI 0000010e transaction [SR] beginning verify and repair
  2012-09-04 11:56:06, info CSI 00000110 [SR] full audit
  2012-09-04 11:56:06, info CSI 00000111 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:06, transaction Info CSI 00000112 [SR] beginning verify and repair
  2012-09-04 11:56:11, info CSI 00000115 [SR] full audit
  2012-09-04 11:56:11, info CSI 00000116 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:11, transaction Info CSI 00000117 [SR] beginning verify and repair
  2012-09-04 11:56:24, Info CSI 00000119 [SR] check complete
  2012-09-04 11:56:24, CSI Info 0000011 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:56:24, CSI Info 0000011b transaction [SR] beginning verify and repair
  2012-09-04 11:56:31, CSI Info 0000011 d [SR] full audit
  2012-09-04 11:56:31, CSI 0000011e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:56:31, CSI Info 0000011f transaction [SR] beginning verify and repair
  2012-09-04 11:56:38, info CSI 00000121 [SR] full audit
  2012-09-04 11:56:39, 00000122 CSI info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:39, transaction Info CSI 00000123 [SR] beginning verify and repair
  2012-09-04 11:56:45, info CSI 00000125 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:49, info CSI 00000127 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:49, info CSI 00000128 [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
  2012-09-04 11:56:49, CSI Info 0000012b [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
  2012-09-04 11:56:50, info CSI 0000012d [SR] full audit
  2012-09-04 11:56:50, CSI 0000012e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:56:50, CSI Info 0000012f transaction [SR] beginning verify and repair
  2012-09-04 11:56:56, info CSI 00000131 [SR] full audit
  2012-09-04 11:56:56, info CSI 00000132 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:56, transaction Info CSI 00000133 [SR] beginning verify and repair
  2012-09-04 11:57:05, info CSI 00000135 [SR] full audit
  2012-09-04 11:57:06, info CSI 00000136 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:06, transaction Info CSI 00000137 [SR] beginning verify and repair
  2012-09-04 11:57:18, CSI Info 0000013a Verify [SR] full
  2012-09-04 11:57:18, CSI Info 0000013 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:57:18, CSI Info 0000013 c [SR] beginning verify and repair operation
  2012-09-04 11:57:22, Info CSI 0000013e [SR] full Verify
  2012-09-04 11:57:23, CSI 0000013f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:57:23, transaction Info 00000140 CSI [SR] beginning verify and repair
  2012-09-04 11:57:29, info CSI 00000142 [SR] full audit
  2012-09-04 11:57:29, info CSI 00000143 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:29, transaction Info CSI 00000144 [SR] beginning verify and repair
  2012-09-04 11:57:34, Info CSI 00000146 [SR] full check
  2012-09-04 11:57:34, Info CSI 00000147 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:34, transaction Info CSI 00000148 [SR] beginning verify and repair
  2012-09-04 11:57:42, CSI Info 0000014a Verify [SR] full
  2012-09-04 11:57:42, CSI Info 0000014 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:57:42, CSI Info 0000014 c [SR] beginning verify and repair operation
  2012-09-04 11:57:51, Info CSI 0000014e [SR] full Verify
  2012-09-04 11:57:51, CSI 0000014f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:57:51, transaction Info CSI 00000150 [SR] beginning verify and repair
  2012-09-04 11:57:55, info CSI 00000152 [SR] full audit
  2012-09-04 11:57:55, info CSI 00000153 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:55, transaction Info CSI 00000154 [SR] beginning verify and repair
  2012-09-04 11:58, info CSI 00000156 [SR] full audit
  2012-09-04 11:58:01, info CSI 00000157 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:01, Info CSI 00000158 [SR] beginning verify and repair
  2012-09-04 11:58:05, CSI Info 0000015a Verify [SR] full
  2012-09-04 11:58:05, CSI Info 0000015 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:58:05, CSI Info 0000015 c [SR] beginning verify and repair operation
  2012-09-04 11:58:10, Info CSI 0000015e [SR] full Verify
  2012-09-04 11:58:11, CSI 0000015f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:58:11, transaction Info CSI 00000160 [SR] beginning verify and repair
  2012-09-04 11:58:16, Info CSI 00000162 [SR] check complete
  2012-09-04 11:58:17, info CSI 00000163 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:17, transaction Info CSI 00000164 [SR] beginning verify and repair
  2012-09-04 11:58:20, Info CSI 00000166 [SR] check complete
  2012-09-04 11:58:20, 00000167 CSI info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:20, transaction Info CSI 00000168 [SR] beginning verify and repair
  2012-09-04 11:58:24, CSI Info 0000016a Verify [SR] full
  2012-09-04 11:58:25, CSI Info 0000016b [SR] audit 92 (0x0000005c) components
  2012-09-04 11:58:25, CSI Info 0000016 c [SR] beginning verify and repair operation
  2012-09-04 11:58:31, Info CSI 0000016e [SR] full Verify
  2012-09-04 11:58:31, CSI 0000016f [SR] repair 2 Info components
  2012-09-04 11:58:31, transaction Info CSI 00000170 [SR] beginning verify and repair
  2012-09-04 11:58:31, info CSI 00000172 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, info CSI 00000174 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, info CSI 00000176 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, Info CSI 00000177 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
  2012-09-04 11:58:31, CSI Info 0000017a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2012-09-04 11:58:31, CSI Info 0000017 c [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, CSI Info 0000017 d [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
  2012-09-04 11:58:31, info CSI 00000180 [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
  2012-09-04 11:58:32, info CSI 00000182 [SR] full repair
  2012-09-04 11:58:32, info CSI 00000183 [SR] validation of transaction
  2012-09-04 11:58:32, info CSI 00000187 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  Hi Mzvern,

  ·         If she invites only to install Vista Service Pack?

  That Factory Restore is the last step in resolving this issue.

  Follow these steps to see what Windows Update is originally the question or any error message/code:

  a. click Start, type Update in the start search box.

  b. in the list of results, click Windows Update.

  (c) in the left pane, click view update history.

  In the meantime, follow the suggestions below for a possible solution:

  Method 1: I suggest you follow the article and then check if it solves the problem.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

   

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: For cause of CFS, it wasn't able to repair files of Member, you can follow these steps.

  If the System File Checker tool cannot repair a file, follow these steps:1.At a command prompt, type the following command and press ENTER:

  takeown /f Path_And_File_Name

  For example, type takeown /f E:\windows\system32\jscript.dll.

  2. type the following command and press ENTER to grant administrators full access to the file:

  ICACLS Path_And_File_Name/grant ADMINISTRATORS: F

  For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.

  3. type the following command to replace the file with a known good copy of the file:

  Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination

  For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.

  For more information, see the following articles:

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

   

  Let us know the results.

• Error with eStation Zeen - no scan for networks

  I have problems with the Zeen on our station.  We stopped using for a few weeks while moving around our headquarters, and now the Zeen gives the error message "Unable to scan for networks" as soon as I try to turn on the wireless Zeen.

  We also have a new router, so I don't know if they are related.

  I tried a full reset to factory specifications, but as soon as it comes to the installation of the network I get the message "unable to scan for networks."

  My PC is a laptop HP with Windows 7 Home Premium x 64

  Printer is a C510a

  I am trying to connect wireless.  The printer works when it is connected via a usb cable.

  Firmware version is ZEP1CN1130AR (2.2) (113110)

  The blue light on the printer wireless flashes.  However, as soon as I get to the installation of zineb and try to turn on the wireless zineb, I get the same error message.

  I found another thread with this exact error message, with no responses.  I found a bit on connectivity issues of zineb/printer, which I had at some point, but this isn't really the issue here.

  No chance, it's hardware related?  More troubleshooting ideas?

  Thank you!
  Ian

  Everything still works for you?  I hope so!  If the problem does not return, please check accept as Solution to help others with this problem.  If this isn't the case, I can't wait to know if Airprint works even when the Zeen is not.

• My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers.

  My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers, most of the time.  Every now and then it will be visible and I can use it but 90% of the time it does not exist.  I tried the regedit fix, nothing.  I tried the program Microsoft Fix It, it tells me it cannot locate a DVD/ROM.  I removed, cleaned and reinserted my DVD/ROM drive, but no difference.  I tried everything, except the upgrade to Windows 7... who will be my last resort.

  Hello gargoyle28m,

  If your hardware is not detected to upgrade to Windows 7 is not a resolution. This issue may be caused if the DVD drive is faulty or connections loose on the mother board. You may need to check the connections. I suggest you check if the DVD drive works on another computer. You can contact the manufacturer of your computer to help you with this problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Deskjet F335 wireless connectivity

  The Deskjet F335 has wireless connectivity?  If so, how can I connect to a wireless network?

  Sorry, it is not a wireless printer.  Some wireless routers have ports USB supported printers (like the Apple Airport series some D-link and Netgear routers as well).  That would be an option.  However none of these supports scanning, printing only.

• Error with Host Update Utility when I scan for patches

  Hello

  I try to use Host Update Utility to update my server ESXi 4.0 to ESXi 4.0 Update 1, but I get the following error when I press the button "Scan For Patches. The error is "an error has occurred. Download failed ". So, I started looking in communities, if someone had the same error and I think that the problem is due to I install my VI Client and Host Update Utility in Windows XP SPANISH version. Could be the language that I use in my OS (Spanish) the cause of this problem?

  I tell you that I do not use any kind of proxies. I am in a private network and between internet and I have only a router. I can navigate anywhere on the internet without any problem and I have no restrictions on what are the ports that I use. The router is reserved for NATS.

  The other issue is . Displaying the HUU configuration file (settings.config) I see the URL for the variable "RemoteDepot" is "https://hostupdate.vmware.com/software/VUM/PRODUCTION/index.xml". "" This URL is correct or VMware has changed it?

  Thanks in advance.

  Warlock.

  I have the same problem. Host Update Utility does not work with windows XP Spanish, you must install Windows Vista Spanish Profesional.

  I think that vmware cares not Spaniards.

• Scan for SQL Injection

  Hello

  My site has been pulled down by the host. They sent me the following message is displayed:

  "We got information that there is injection of SQL code on our server and when we draw the injection point is for your domain. '.
  This is the type of attack:
  SQL generic sql update injection attempt - GET, SQL union select parameter - possible sql injection attempt - GET parameter

  That's why we need to disable your Web site for temporary.
  Please, scan your PC and the Web site of local files and make sure that your local files from PC and the site Web is virus-free.
  If you have you analyze local files on PC and the website also make sure that there is no virus please update this post once again.
  So we can reactivate your website. »

  Anyone know what I use for scanning for this please?

  Thank you

  Apple hosts your Web site?

• I just downloaded itunes 12 he scanned for media and found my ringtones but theres no record

  I just downloaded iTunes 12 he scanned for media and found my ringtones, but there is no folder for it.

  Should not have its own playlist?

  Hi, teday.

  Thanks for the question!  I understand that you have imported ringtones to your computer and you are not able to see them in iTunes.  Ringtones in iTunes are usually marked with the extension .m4r and if they do not have this extension, whereas they would be music files.  You are able to check that these files have the extension?  If these files have been imported into iTunes, you can locate in C:\Users\username\My Musique\iTunes\iTunes Media\Tones.  If these files are not in this folder then the article below will guide you through how to locate them.

  Search and organize your iTunes media files

  Alternatively, you can try to import these files again if they have the .m4r extension.

  12 iTunes for Windows: importing music and video already on your computer

  The interface of iTunes 12 has also changed, so we'll see if they are found in the section of tones more option.  This will reveal the pop-up menu allowing you to select the media in your library.

  

  Using the new iTunes

  Let me know if you are unable to locate these tones and I thank you for visit Apple Support communities.

  See you soon

• How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  I recently had to format my hard drive and reinstall iTunes 12.3.2.35 on my Win7 PC. As part of the re - install iTunes, I clicked on the button scan for music.  This has created duplicates several of my songs.  I deleted then the duplicate songs from iTunes, but when I went to play a few songs a pop-up said "the song would not be because the original could not be found.  You want to locate? "When I tried to locate the song it is not found, but when I pulled the songs out of the trash they could be found.

  How can I keep the original and remove any duplicate songs in iTunes on PC Win7 which took place after iTunes to scan for music during a re - install?

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2

• DeskJet 5940: Drivers for deskjet 5940

  Can someone give me a link to the drivers xp and vista for deskjet 5940? I want hp FTP links

  Not found drivers on the 3rd site part... Subject to close

• 8600 pro Plus scanning for paper A4 on Mac

  8600 pro Plus scanning for paper A4 on Mac

  I'm unable to scan A4 paper on my device of 8600 by using the HP scanning Application. I have validated that I use the latest software/firmware.

  I can print on A4 paper just can't sweep.  Any help would be appreciated.

  Hi TLC20,

  Thank you for your answer! I was wondering if you are able to copy with A4 paper.

  In the meantime, try the following:

  Load A4 paper on the ADF clash.

  On a Mac, click the Apple icon, click System Preferences, click Print & Scan, select your printer in the list, click the scanning tab, then click on open Scanner.

  Make sure that the document feeder is selected not to dish. Then change the format of A4 paper.

  Hope this helps you and have a great day!

• OR Max: No button "Scan for instruments.

  Before I start I will say that I used the NI GPIB-USB-HS devices for years with relatively few questions. I also visited several forums posted by people with a similar problem.  Basically, my problem is as the title suggests: when I open OR max and look for the GPIB-USB-HS device there is no button "scan for instruments" I'm used to seeing on the top bar.

  It's the first time I used nor max v. 16.0 and it is quite frustrating.  I believe that my ni488 driver is up to date and I have included all the details of the pilot in the screenshot below.  I can't understand what's not here, but my program LabView can not connect the GPIB instrument.

  A couple more things to note:

  -The same GPIB-USB-HS device that doesn't work here works on another computer with an earlier version of NI Max.

  -LabView program that I use to connect the GPIB instrument which does not work here works on another computer

  -When I browse for the GPIB-USB-HS in 'Device Manager' and select 'set to day pilot' windows tells me that the driver is up-to-date

  -I'm on windows 8
  

  Please help me.

  Hi JohnDoe89,

  This sounds like it would be very frustrating to meet - so let's see if we can reduce what could be the cause of the problem, we can determine the best way to solve it.

  You mentioned that things work correctly on another computer with software versions different-can you let us know which are running the versions of the software on this computer? It would be useful to compare to the list in the picture you posted.

  In the list you posted (I guess it's the software on the computer that does not work, rather than one that is), I noticed that you use 16.0 versions of many of your drivers. The readme for 488,2 drivers, it looks like the version 16.0 is backward compatible with LabVIEW 2013, rather than the 2012 I see on your list. If this computer is running an earlier version of the drivers/MAX, but the same version of LabVIEW, it's perhaps at least a part of what is causing the problem.

  If you can put the list of software for computer work, which will give us more information to work from.